Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Technical Documentation and Manual Production

Active

State & Local

Response Deadline08/24/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the production and delivery of three comprehensive manuals—operator, service, and parts—for a guardrail mower, each presented in a clear, well-labeled format that may be delivered electronically or in printed form. These manuals must be technically accurate and user-friendly, ensuring proper use, maintenance, and component identification for end users. The work is part of a subcontract under the NAICS code 541611, targeting technical documentation services, and is issued by the state of Iowa with a response deadline of August 24, 2026, following a posting on July 31, 2026. All deliverables must meet specified quality standards without guidance on format preference, allowing flexibility between digital and physical outputs as long as clarity and labeling requirements are fully satisfied.

General Info

Produce three accurate, user-friendly manuals for a guardrail mower—operator, service, parts—delivered digitally or printed.

Agency

IowaView Agency

NAICS

541611 - Administrative Management and General Management Consulting ServicesView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 31

subcontract

Response DeadlineAug 24

Submission deadline

Response Deadline

08/24/2026, 06:00:00 PM UTCin 23 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyIowa

ContactsNo contacts available

OfficeN/A

Organization / Agency

Iowa

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Produce and deliver three complete manuals: operator, service, and parts, for the guardrail mower in clear, labeled format (electronic or printed).

Similar Contracts

Same NAICS industry code

Title VI & Nondiscrimination Compliance ManagementThe contract requires comprehensive management of nondiscrimination compliance under Title VI of the Civil Rights Act, the Americans with Disabilities Act, and the Age Discrimination Act within public transit operations in Arizona. The scope includes developing and implementing policies and procedures to ensure equitable hiring practices and service delivery, conducting regular training programs for staff, and providing audit support to verify adherence to federal nondiscrimination requirements. All activities must be aligned with the NAICS code 541611, indicating a focus on management consulting services aimed at regulatory compliance. The subcontract is open for response until September 30, 2026, and is issued under the Public Transit agency in Arizona. It applies broadly across all transit services and employment functions within the state, necessitating a structured approach to identifying, mitigating, and correcting potential disparities in access and opportunity. Compliance efforts must be proactive and documentation-rich to support ongoing oversight and internal reviews. No specific set-aside provisions apply, and performance is expected to occur within Arizona without designated physical office requirements.

POSTED

about 20 hours ago

DEADLINE

in about 2 months

Small Business Participation Reporting & ComplianceThe contract requires comprehensive tracking, documentation, and reporting of subcontracting activities to ensure full compliance with the City of Phoenix Small Business Participation Plan and the DBE-N Program. This includes maintaining meticulous, audit-ready records that demonstrate adherence to state and local goals for small business and disadvantaged business enterprise participation across all qualifying projects under the Public Transit agency in Arizona. All subcontracting obligations must be monitored throughout the lifecycle of the work, with regular reporting to confirm that target participation rates are being met and that all necessary certifications and verifications are current and properly maintained. The work spans the period from the contract posting date in August 2026 through the response deadline in September 2026, with performance likely extending beyond this timeframe to cover ongoing project execution. The North American Industry Classification System code 541611 indicates the scope is related to management, scientific, and technical consulting services, suggesting the subcontracting activities involve professional services contracted by the transit agency. The contractor must ensure all processes are transparent, defensible, and fully aligned with Phoenix’s specific compliance frameworks, with an emphasis on accuracy, timeliness, and readiness for external audits or reviews by city officials or regulatory bodies.

POSTED

about 20 hours ago

DEADLINE

in about 2 months

Interpreter Scheduling and Dispatch CoordinationThe contract requires the management of end-to-end scheduling and dispatch of interpreters across multiple regions operated by the California Department of Corrections & Rehabilitation, ensuring interpreters are deployed promptly and in full compliance with established notification protocols. This subcontract focuses on coordinating language services to support communication needs within the state’s correctional facilities, with an emphasis on reliability, timeliness, and adherence to procedural requirements. The work spans various CDCR locations and demands robust logistical coordination to meet the dynamic demands of the correctional environment. The solicitation was posted on July 31, 2026, with a response deadline of August 21, 2026, and falls under NAICS code 541611 for management consulting services. Although no set-aside information is provided and specific geographic details for performance or agency address are unspecified, the contract is administered by the California Department of Corrections & Rehabilitation under the broader state agency structure. Interested parties must submit proposals through the CalEProcure portal before the deadline to be considered for this essential support function within the state’s correctional system.

California Department of Corrections & Rehabilitation

POSTED

about 20 hours ago

DEADLINE

Federal Education Fund Integrity CertificationThe Federal Education Fund Integrity Certification requires the contractor to conduct a thorough internal review and certification that all owners, officers, employees, and agents have not engaged in any fraud involving federal education funds or had their participation in Title IV programs revoked. This obligation applies across all levels of the organization and extends to any parties acting on its behalf, ensuring comprehensive compliance with federal integrity standards. The certification must be completed and submitted by the response deadline of August 14, 2026, and is tied to a subcontract under the NAICS code 541611, indicating the nature of the services provided relates to administrative management and general management consulting activities. The contract is issued by the University of Kansas and is part of its internal compliance framework to safeguard federal funding. While no specific set-aside provisions or geographic performance locations are detailed, the requirement is binding on the contractor as a condition of participation in any related federal education programs. Failure to properly certify or the discovery of false certifications may result in disqualification, termination of the subcontract, and potential legal consequences under federal oversight authorities. All parties involved must ensure accuracy and completeness in their disclosures to meet the legal and fiduciary responsibilities associated with handling federal education funds.

University Of Kansas

POSTED

about 20 hours ago

DEADLINE

Debarment and Eligibility Certification ServicesThe contractor is required to provide services focused on preparing and maintaining certifications to confirm that the contractor and its principals are not debarred, suspended, or under indictment by any federal or state authority. These certifications are essential to ensure compliance with eligibility requirements for participating in federally funded programs and contracts. The work involves ongoing monitoring of federal databases and internal compliance checks to verify the status of all relevant parties, with prompt updates and documentation submitted as needed to maintain continuous eligibility. This subcontract is issued by the University of Kansas under NAICS code 541611, which pertains to management consulting services, indicating that the certification process is part of broader compliance and risk management support. The solicitation was posted on July 31, 2026, with responses due by August 14, 2026. While no specific place of performance or point of contact is listed, the work is likely performed remotely or in alignment with the university’s internal compliance framework. The nature of the task demands accuracy, timeliness, and familiarity with federal procurement regulations to prevent disruptions to university operations or funding eligibility.

University Of Kansas

POSTED

about 20 hours ago

DEADLINE

Accessibility Compliance Documentation (VPAT & Remediation Roadmap)The contract seeks the development of Voluntary Product Accessibility Templates and remediation roadmaps to ensure electronic equipment and systems meet Section 508 and WCAG 2.1 AA accessibility standards. The work involves assessing current technologies for compliance gaps, documenting findings in standardized VPAT formats, and creating detailed, actionable plans to address accessibility deficiencies. The deliverables must reflect a thorough understanding of federal accessibility requirements and provide clear guidance for implementation by technical teams. This subcontract is issued by the University of Kansas with a response deadline of August 14, 2026, and is classified under NAICS code 541611 for administrative management and general management consulting services. The performance location is not specified, and there is no set-aside designation indicated. Interested parties must submit proposals through the university’s electronic bidding portal before the deadline, and the contract will support the institution’s commitment to digital accessibility across its technology infrastructure.

University Of Kansas

POSTED

about 20 hours ago

DEADLINE

Cybersecurity & Access Control for Video NetworkThe contract titled Cybersecurity & Access Control for Video Network requires the implementation of a robust security framework to protect video sharing among authorized government agencies, with a primary focus on role-based access control to ensure only authenticated personnel can view or manage sensitive footage. It mandates the use of strong encryption protocols to safeguard data both at rest and in transit, intrusion detection systems to identify and respond to unauthorized access attempts, and comprehensive audit logging to maintain a verifiable record of all user activities and system events. These components must be integrated seamlessly into an existing or newly developed video network infrastructure to meet stringent security and compliance standards. The contract is structured as a subcontract under the Texas Department of Transportation, with a posted date of July 31, 2026, and a response deadline of August 24, 2026. It falls under NAICS code 541611, which corresponds to administrative management and general management consulting services, indicating a need for specialized cybersecurity expertise rather than hardware procurement. The place of performance and point of contact details are unspecified, but the solicitation is accessible via the Texas SmartBuy portal, suggesting the work may be performed remotely or at Texas DOT facilities. The absence of a set-aside designation means all eligible contractors may compete, and successful bidders must deliver a fully functional, auditable, and secure video sharing platform aligned with state and federal cybersecurity best practices.

Texas Department of Transportation

POSTED

about 21 hours ago

DEADLINE

HUB Certification SupportThe contract titled HUB Certification Support is designed to assist contractors in verifying and submitting their Historically Underutilized Business certification through the Texas Comptroller’s office to qualify for HUB status. This subcontract aims to streamline the certification process, ensuring that eligible businesses can properly document and claim their status to participate in state and local contracting opportunities. The work requires expertise in navigating Texas HUB requirements, accurately compiling documentation, and aligning submissions with state guidelines to avoid delays or rejections. The solicitation was posted on July 31, 2026, with a response deadline of August 19, 2026, indicating a narrow timeframe for interested parties to submit proposals. The North American Industry Classification System code 541611 identifies the scope as management consulting services, reflecting the advisory and administrative nature of the support being sought. The contracting agency is the City of Denton operating under the state of Texas, and the performance location is within the same jurisdiction, though specific geographic details are not provided. The work is intended to enhance procurement equity by helping underutilized businesses gain access to city contracting programs through compliant and timely certification.

POSTED

about 21 hours ago

DEADLINE

Subcontractor Management and ReportingThe contract titled Subcontractor Management and Reporting requires the contractor to oversee the development and implementation of DBE, MBE, and WBE subcontracting plans to ensure compliance with diversity and inclusion goals. This includes securing pre-approval for all designated subcontractors prior to their engagement and maintaining accurate records of subcontractor awards and expenditures. Monthly reporting is mandatory, with detailed submissions tracking the utilization of minority and women-owned businesses throughout the project lifecycle to demonstrate adherence to equitable contracting standards. The contract is managed by the City of Denton under NAICS code 541611 and is open for response until August 19, 2026. While no specific set-aside type is designated, the emphasis remains on fostering participation from disadvantaged business enterprises. Performance is expected to align with the city’s broader equity initiatives, and all activities must be conducted under the oversight of the contracting authority, with strict adherence to reporting timelines and pre-approval protocols to maintain compliance and accountability.

POSTED

about 21 hours ago

DEADLINE

Small Business and Supplier Diversity Compliance (Administrative Support)The contract requires administrative support to assist a prime contractor with supplier diversity reporting and compliance, focusing specifically on obligations under Executive Order 11246 that may be triggered by the use of federal funds, even though no formal small business set-asides are in place. The work centers on ensuring accurate documentation, timely submissions, and adherence to federal reporting standards related to minority, women-owned, and other disadvantaged business enterprises, with an emphasis on maintaining compliance without the framework of reserved contracting opportunities. Performance of the contract will be based in Boston, Massachusetts, and the North American Industry Classification System code 541611 indicates the nature of the services involves management consulting, particularly in the administrative and compliance domain. The solicitation is classified as a subcontract and was posted on July 31, 2026, with a response deadline of August 19, 2026. The contracting authority is the Massachusetts agency under the 400000 - Procurement & Logistics designation, and while the exact point of contact details are not provided, the requirement is focused entirely on supporting the prime contractor’s federal compliance obligations through diligent administrative oversight and recordkeeping.

400000 - Procurement & Logistics

POSTED

about 22 hours ago

DEADLINE

Forced Labor and Certification Compliance ServicesThe contract pertains to services supporting the completion and ongoing maintenance of critical compliance certifications necessary for supply chain integrity, with a specific focus on the Foreign Country of Concern Attestation (PUR 1355) and the Forced Labor Compliance Certification. These certifications are essential to meet regulatory standards and ensure that all materials and products within the supply chain are free from forced labor and meet federal requirements regarding sourcing from foreign countries of concern. The work involves managing documentation, coordinating internal and external stakeholders, monitoring regulatory updates, and maintaining audit-ready records to sustain compliance over time. The services are delivered under a subcontract arrangement, aligned with NAICS code 541611 for management consulting services, and are required to support the Florida Fish and Wildlife Conservation Commission in fulfilling its federal compliance obligations. While the place of performance and point of contact details are not specified, the response deadline for submissions is set for September 10, 2026, and the opportunity was posted on July 31, 2026, indicating a window for interested vendors to propose their capabilities in compliance support.

Florida Fish and Wildlife Conservation Commission

POSTED

about 22 hours ago

DEADLINE

in about 1 month

Small Business and Minority Subcontractor Reporting ComplianceThe contract requires administrative support to ensure compliance with Florida Fish and Wildlife Conservation Commission’s subcontracting reporting obligations, specifically focusing on the preparation and timely submission of the Subcontractor Minority Status Report alongside each invoice. This task is critical to maintaining adherence to state-mandated reporting standards for small business and minority subcontractors, and the contractor must maintain accurate records and ensure all data submitted aligns with current regulatory requirements. The work is tied directly to the invoicing cycle, demanding consistent and meticulous attention to detail to avoid delays or noncompliance penalties. The solicitation, posted on July 31, 2026, with a response deadline of September 10, 2026, falls under NAICS code 541611 for management consulting services and is categorized as a subcontracting opportunity. While no specific set-aside designation is provided, the emphasis on minority subcontractor reporting indicates a focus on promoting equitable participation in state-funded projects. The work is performed in support of the Florida Fish and Wildlife Conservation Commission, with no designated physical place of performance specified, allowing for remote or virtual execution of administrative duties. The contractor must be prepared to interact with internal systems and reporting templates used by the agency to ensure seamless integration of subcontractor data into the invoicing process.

Florida Fish and Wildlife Conservation Commission

POSTED

about 22 hours ago

DEADLINE

in about 1 month

More opportunities from Iowa

Same awarding agency

Specialty Vehicle Delivery and Logistics to Remote SiteThe contract entails the final-mile delivery of a specialty utility terrain vehicle to the Sugema Wildlife Unit, with full responsibility for freight handling, transportation insurance, and guaranteed on-time arrival no later than September 30, 2026. The scope requires end-to-end logistics coordination to ensure the vehicle reaches a remote location without damage or delay, adhering to strict compliance standards for safe transport in challenging environments. All risks during transit, including potential damage, loss, or scheduling failure, are borne by the contractor, who must demonstrate proven capability in handling high-value, sensitive equipment to isolated areas. This is a subcontract under NAICS code 484220, reflecting its classification as a specialized truck transportation service. The solicitation was posted on July 31, 2026, with bids due by August 21, 2026, and is managed by the State of Iowa through its agency portal. While specific performance locations and contact details are not enumerated, the place of performance is identified as a remote wildlife site requiring precise logistical planning. The contractor must meet all operational requirements without reliance on external support and will be held accountable for full delivery compliance as stipulated in the agreement.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 23 hours ago

DEADLINE

Aftermarket Suspension Upgrade Supply (Alternative Compliance Option)The contract seeks the supply of heavy-duty suspension components, such as S3 Powersports HD Springs or functionally equivalent alternatives, intended for integration into off-road utility task vehicles to meet regulatory compliance standards. Bidders must provide comprehensive technical documentation demonstrating the performance, durability, and safety attributes of their components, with a specific requirement to secure approval from the Department of Natural Resources to establish equivalency to approved systems. The procurement is structured as a subcontract tied to a broader compliance initiative, and the North American Industry Classification System code 336340 indicates the focus on motor vehicle parts manufacturing. All proposals must be submitted by the deadline of August 21, 2026, and interested parties should access the official solicitation portal for detailed submission guidelines and additional requirements.

Motor Vehicle Brake System Manufacturing

POSTED

about 23 hours ago

DEADLINE

Supply of Heavy-Duty Utility Task Vehicle (UTV) with Upgraded SuspensionThe contract requires the supply and delivery of one new 2026 Can-Am Defender 6x6 Limited or an equivalent utility task vehicle (UTV) equipped with heavy-duty suspension, an enclosed cab, full HVAC capability, a winch, and a reinforced front bumper. The vendor must be an authorized representative of the original equipment manufacturer and is expected to deliver a vehicle meeting or exceeding the specified rugged specifications suited for demanding operational environments. The vehicle must be brand new, with all included components fully functional and factory-installed to ensure reliability and performance under strenuous conditions. This is a subcontract solicitation posted on July 31, 2026, with a response deadline of August 21, 2026, and falls under NAICS code 336120 for motor vehicle manufacturing. The contracting agency is the State of Iowa, with no additional details provided on the office location or point of contact. All bids must be submitted through the designated online portal linked in the solicitation, and the place of performance has not been specified, implying delivery may be required to any designated location within the state or as further determined by the agency. The requirement emphasizes compliance with OEM standards and the provision of a high-performance UTV capable of supporting heavy-duty utility operations.

Heavy Duty Truck Manufacturing

POSTED

about 23 hours ago

DEADLINE

27CRDWBCLULL-0010G - CanAm Defender (Syfert)

Solicitation # 27CRDWBCLULL-0010G

The Iowa Department of Natural Resources is soliciting bids for the purchase of a new 2026 Can-Am Defender 6x6 Limited equipped with upgraded heavy duty springs or a state-approved equivalent, intended for use in state operations. While the Can-Am Defender is cited as a reference model, vendors are encouraged to propose comparable vehicles that meet or exceed the stated functional requirements, provided they submit full technical specifications and clearly note any deviations from the reference specifications for evaluation. Only authorized manufacturer representatives eligible to honor the full manufacturer’s warranty may respond to this solicitation. All proposals must be submitted through the designated online portal, where respondents are required to save progress frequently, especially after uploading documents, and must recertify and resubmit their bid each time they reopen it after initial submission, even if no changes were made. Any amendments issued by the issuing officer must be reviewed and acknowledged by respondents, who are then required to certify and resubmit their proposal to remain eligible, although previously entered information will be retained. The solicitation opens on July 31, 2026, with a firm deadline for responses on August 21, 2026, at 7:00 PM, and all submissions must follow the guidelines posted on the Iowa DNR’s official RFP and bid letting website. Point of contact for inquiries is Colton Lullmann, reachable via email.

Motorcycle, ATV, and All Other Motor Vehicle Dealers

POSTED

about 23 hours ago

DEADLINE

Substitution and Compliance Support (Engineering/Testing)The contract involves providing engineering and testing support to a prime bidder for the preparation of a Pre-Bid Request for Substitutions, with a focus on delivering detailed performance data, technical specifications, and justifications for equipment that is not listed in the original specifications. This effort requires thorough technical analysis to demonstrate equivalency of non-listed items, ensuring compliance with project requirements and procurement standards. The work is time-sensitive, with a response deadline set for August 24, 2026, and was posted on July 31, 2026, indicating a compressed timeline for research, documentation, and submission. The contract is categorized as a subcontract under NAICS code 541330, which corresponds to engineering services, and is associated with the Iowa state agency. While specific details about the place of performance or point of contact are not provided, the work is expected to be conducted remotely or in coordination with the prime bidder’s team. Interested parties must access the opportunity via the designated UI link to obtain full solicitation details and submit proposals before the deadline. The nature of the task demands expertise in technical documentation, regulatory compliance, and the ability to defend equipment substitutions with credible, verifiable data.

Engineering Services

POSTED

DEADLINE

Operator Training ServicesThe contract requires the provision of comprehensive hands-on operator training for Iowa DOT crews on the safe and effective use of a new guardrail mower. Training must cover all essential operational aspects including system controls, routine maintenance protocols, and emergency response procedures to ensure crew safety and equipment longevity. The training is designed to be practical and field-oriented, directly addressing the needs of personnel who will be operating the machinery in real-world conditions across Iowa’s roadways. Subcontractors responding to this solicitation must be prepared to deliver training that aligns with industry best practices and state safety standards, with all instruction taking place in the field where the equipment will be used. The opportunity was posted on July 31, 2026, and responses are due by August 24, 2026, under NAICS code 611519 for other schools and instruction. There is no formal set-aside designation, and the work is to be performed statewide with no specified location restrictions beyond the scope of Iowa DOT operations.

Other Technical and Trade Schools

POSTED

DEADLINE

On-Site Installation Support and Technician ServicesA qualified field technician will be required to provide on-site support for the mechanical and hydraulic installation of a guardrail mower at the Iowa DOT’s Central Repair Shop in Ames, Iowa. The contract calls for hands-on technical expertise to ensure proper assembly, integration, and functional verification of the equipment in a controlled facility environment, with the technician expected to work directly at the shop location during the installation process. The work falls under NAICS code 811490, indicating it involves other miscellaneous repair and maintenance services, and is structured as a subcontract opportunity with a response deadline of August 24, 2026, following a posting date of July 31, 2026. All activities must be performed in compliance with Iowa DOT standards and protocols, though specific terms such as contract duration, payment structure, or performance metrics are not detailed here.

Other Personal and Household Goods Repair and Maintenance

POSTED

DEADLINE

Guardrail Mower Supply and ManufacturingThe contract calls for the supply and manufacturing of a specialized 3-point mounted guardrail mower designed for efficient and safe operation along roadways and rights-of-way. The equipment features dual independently driven cutting heads to ensure precise trimming on both sides of guardrails, with a 60-inch straddle clearance that allows the mower to navigate between railings without requiring excessive repositioning. Automatic post maneuvering enables the machine to detect and adjust around vertical support posts, minimizing operator intervention and enhancing productivity. Hydraulic tilt functionality provides the ability to adjust the cutting angle to match uneven terrain or varying rail profiles, while PTO-driven operation at 1000 RPM ensures compatibility with standard agricultural and utility tractor power take-off systems. The design prioritizes durability, precision, and operational reliability in demanding roadside maintenance environments. This is a subcontract under the NAICS code 333111 for agricultural, construction, and mining machinery manufacturing, solicited by the State of Iowa with a response deadline of August 24, 2026. The posting date indicates the opportunity was made available on July 31, 2026, and the place of performance remains unspecified, suggesting the equipment may be delivered to various state-maintained locations statewide. Interested parties should submit proposals through the provided online portal before the deadline, and all technical specifications must be met to ensure compliance with Iowa’s operational and safety standards for roadside vegetation management equipment.

Farm Machinery and Equipment Manufacturing

POSTED

DEADLINE

Alternate Brand Substitution Engineering & CertificationThe contract requires engineering evaluation and certification of alternative brand concrete saws to verify compliance with Iowa DOT specifications through the formal substitution process. This work involves technical analysis of non-standard equipment to ensure performance, safety, and regulatory alignment with state transportation infrastructure requirements, with the goal of approving substitutes for approved primary brands. All submissions must be thoroughly documented and validated to meet the rigorous standards expected by the Iowa Department of Transportation. The solicitation is open as a subcontract with a response deadline of August 21, 2026, and is classified under NAICS code 541330, indicating professional, scientific, and technical services related to engineering. The contracting entity is the State of Iowa, and all work is expected to support state infrastructure operations. Interested parties must submit evaluations and certifications by the specified deadline to be considered, and performance will be reviewed against established technical criteria to determine eligibility for substitution approval.

Engineering Services

POSTED

DEADLINE

Warranty and Field Service SupportThe contract seeks a contractor to provide warranty-backed repair, maintenance, and field service support for concrete saws used across Iowa DOT operations. This subcontract requires the vendor to deliver timely and reliable technical services to ensure the continued operational readiness of equipment, with all work backed by a warranty to guarantee quality and performance. Services must be performed across the state of Iowa, covering all necessary field locations where concrete saws are deployed for infrastructure projects. The contractor is expected to respond to service requests promptly, perform diagnostics and repairs, replace defective parts under warranty, and maintain detailed service records to meet Iowa DOT’s operational and compliance standards. The solicitation was posted on July 31, 2026, with responses due by August 21, 2026, and falls under NAICS code 811310 for commercial and industrial machinery and equipment repair and maintenance. The contract is structured as a subcontract, and while no set-aside provisions are specified, bidders must be prepared to meet all technical and logistical demands of supporting state-mandated infrastructure maintenance activities. The point of contact and exact performance locations are not listed, but services will be required statewide, and all work must align with Iowa DOT’s operational protocols. Interested parties can access additional details through the provided UI link on the Sciquest platform.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Technical Documentation and Manual DevelopmentThe contract involves the development of comprehensive operation, maintenance, and safety manuals for delivered concrete saws, fully aligned with the technical specifications and warranty standards set by the Iowa Department of Transportation. The work must meet all required regulatory and performance benchmarks to ensure end-users receive clear, accurate, and compliant documentation that supports safe and efficient equipment use. The project is structured as a subcontract under NAICS code 541830, which pertains to technical writing services, and is open for proposals with a deadline of August 21, 2026. The contract is administered by the Iowa agency, with performance expected to meet state-specific operational and safety protocols. All deliverables must be thoroughly reviewed for accuracy, usability, and adherence to Iowa DOT mandates without reliance on external citations or proprietary references.

Media Buying Agencies

POSTED

DEADLINE

Heavy-Duty Diesel Concrete Saws SupplyIowa DOT is seeking suppliers to provide heavy-duty diesel-powered concrete saws equipped with a 48 HP engine, 36-inch cutting depth, hydrostatic drive, and an integrated water coolant system for use on state highway projects. These machines must meet robust performance standards to handle continuous, high-demand cutting operations in demanding construction environments. The contract is structured as a subcontract and falls under NAICS code 333120, which classifies it within the construction machinery manufacturing sector. Responses are due by August 21, 2026, with the solicitation published on July 31, 2026, providing a three-week window for vendor submissions. All equipment will be delivered and used solely for performance at Iowa DOT highway project sites, though specific delivery locations are not yet defined. The procurement does not specify any set-aside provisions, meaning participation is open to all qualifying vendors regardless of business size or status. Interested parties must access the official bidding portal via the provided link to submit proposals and review detailed technical requirements.

Construction Machinery Manufacturing

POSTED

DEADLINE