Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Technical Labor Support for SEDG Integration

Active

Federal

Response Deadline08/24/2026, 01:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks qualified technical labor to support the integration, installation, and troubleshooting of SEDG systems under the direction of the Navy, with specialists in electricians, diesel mechanics, and control system technologies required to fulfill mission-critical responsibilities. These personnel will be embedded within operational environments, primarily in Sasebo, to ensure seamless coordination with naval units and maintain readiness through responsive maintenance and system optimization. The work spans both installation phases and ongoing support activities, requiring a deep understanding of military standards and direct collaboration with Navy personnel. The opportunity is structured as a subcontract under NAICS code 811310, with a response deadline of August 24, 2026, and was posted on July 23, 2026. Performance is concentrated at the Sasebo location, and the contracting entity is the Naval Supply Systems Command Fleet Logistics Center Yokosuka, operating under the Department of Defense. The contract does not specify a set-aside type, meaning it is open to all eligible subcontractors, and no point of contact details are provided in the solicitation, requiring proposers to navigate the SAM.gov platform directly for further information.

General Info

Qualified technicians needed for SEDG system integration and maintenance in Sasebo under Navy direction.

Agency

Department Of Defense → Navsup Flt Logistics Ctr YokosukaView Agency

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and MaintenanceView NAICS

Place of Performance

Sasebo, JP-42, 8570063, JPN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 23

subcontract

Response DeadlineAug 24

Submission deadline

Response Deadline

08/24/2026, 01:00:00 AM UTCin 29 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Flt Logistics Ctr Yokosuka

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Navsup Flt Logistics Ctr Yokosuka

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provision of skilled technicians including electricians, diesel mechanics, and control system specialists to support SEDG installation, troubleshooting, and Navy coordination.

Similar Contracts

Same NAICS industry code

Lufkin Generator ServicesThe Texas Department of Public Safety is soliciting bids for generator services at 2809 S. John Reddit Dr. in Lufkin, Texas, under solicitation number 26R0024565. This opportunity is open to qualified vendors capable of providing comprehensive generator maintenance, repair, and related services at the specified location. The solicitation was posted on July 25, 2026, and responses are due by 11:00 p.m. CT on August 14, 2026. There is no specific set-aside classification indicated, and the NAICS code has not been provided. The contract falls under the state, local, and education (SLED) category, managed by the Texas DPS office. Ruben Reyes is the primary point of contact for inquiries, reachable at 512-424-5137 or ruben.reyes@dps.texas.gov. All necessary details and submission guidelines can be accessed through the official Texas SmartBuy portal link provided.

Department of Public Safety

POSTED

about 23 hours ago

DEADLINE

Maintenance and Repairs for Commercial Laundry Equipment at the Mexia State Supported Living Center.The Texas Health and Human Services Commission is soliciting competitive bids to secure services for the maintenance and repair of commercial laundry equipment at the Mexia State Supported Living Center located at 540 Chapel Drive in Mexia, Texas. The solicitation, numbered HHS0017693, was posted on July 24, 2026, with a response deadline of August 14, 2026, at 4:30 PM Central Time. This procurement is managed by the Procurement and Contracting Services division of the agency and is intended to establish one or more contracts to ensure the ongoing operational reliability of laundry systems critical to the center’s daily functions. The work involves comprehensive servicing, troubleshooting, and repair of industrial-grade laundry machines and related infrastructure to maintain health, hygiene, and compliance standards within the facility. The contract will be awarded to qualified vendors able to demonstrate experience in commercial laundry equipment maintenance, response capabilities, and adherence to state facility requirements. Proposals must be submitted through the Texas SmartBuy portal, and all inquiries should be directed to David Martinez, the primary point of contact, via email at david.martinez01@hhs.texas.gov or phone at 512-406-2597. The opportunity is open to eligible businesses under the state and local government (SLED) category, with no set-aside designation specified, and the place of performance is exclusively located in Mexia, Texas. Bidders are expected to provide detailed service plans, pricing structures, and proof of technical competency to meet the operational demands of a state-supported living center.

Health and Human Services Commission

POSTED

DEADLINE

Small, Local, and DBE/MBE/WBE Supplier ParticipationHenry County Board of Commissioners is inviting certified small, disadvantaged, minority-, women-, and veteran-owned businesses to serve as subcontractors or suppliers in support of generator maintenance services under a subcontract opportunity. The solicitation is open to businesses certified under relevant disadvantaged business enterprise programs and aims to foster local economic participation through targeted subcontracting roles. The NAICS code 811310 specifies the scope of work centered on industrial and commercial equipment repair and maintenance, with performance expected to occur within Georgia. The posting date is July 24, 2026, and responses must be submitted by August 25, 2026, at 8:00 PM Eastern Time. While no specific set-aside designation is listed, the opportunity explicitly encourages participation from underrepresented business owners. Interested parties should access the full solicitation details via the provided state portal link before the deadline.

Henry County Board of Commissioners

POSTED

DEADLINE

in about 1 month

Generator Inspection and Maintenance ServicesHenry County Board of Commissioners is seeking a subcontractor to conduct biannual inspections and preventive maintenance on 31 generator units located across various county facilities. The generators include both diesel and natural gas-powered models, each with specific technical ratings that must be adhered to during servicing. The work requires qualified personnel capable of performing comprehensive maintenance procedures to ensure operational reliability and safety standards are consistently met. All tasks must be completed on a scheduled biannual basis across all designated sites. This procurement is classified under NAICS code 811310 for Miscellaneous Repair and Maintenance. The solicitation was posted on July 24, 2026, and responses are due by August 25, 2026, at 8:00 PM. The contract is structured as a subcontract and no set-asides have been designated. Performance of the services will occur at facilities within Henry County, Georgia, though exact locations are not specified. The full solicitation can be accessed via the provided state procurement portal link.

Henry County Board of Commissioners

POSTED

DEADLINE

in about 1 month

RFP #27-03, Generator Services and Maintenance - Annual ContractHenry County is seeking qualified vendors to provide annual generator services and maintenance for generators located across various county buildings under a renewable one-year contract. The selected contractor must supply all necessary labor, materials, equipment, and services to ensure proper operation, scheduled maintenance, and timely repairs of the generators. Proposals must be submitted by 3:00 PM local time on August 25, 2026, and can be delivered in person, via mail or common carrier to the Purchasing Department at 140 Henry Parkway, McDonough, GA 30253, or electronically through the County’s eProcurement Portal. Emailed or faxed submissions will not be accepted. Once submitted, proposals cannot be withdrawn for sixty days except as permitted by law, and the County retains the right to reject any or all proposals without explanation or to waive minor technical discrepancies. The solicitation is managed by the Henry County Board of Commissioners, with primary contact information provided through Christina Dismuke at purchasing@henrycountyga.gov or 770-288-6027.

Henry County Board of Commissioners

POSTED

DEADLINE

in about 1 month

Repair & Parts for sheet ironer at Richmond SSLCThe contract solicitation titled Repair & Parts for sheet ironer at Richmond SSLC is issued by the Texas Health and Human Services Commission under solicitation number HHS0017554v3, posted on July 24, 2026, with a response deadline of August 7, 2026, at 4:30 PM CT. This solicitation is categorized as a SLED procurement, indicating it is directed toward state, local, or educational entities, and the work is to be performed in Texas, specifically at the Richmond SSLC facility. The scope involves the repair and provision of necessary parts for a sheet ironer, though specific technical requirements or part specifications are not detailed in the provided metadata. The primary point of contact for inquiries is Kimberly Andrews, reachable at 972-337-6254 or Kimberley.Andrews@hhs.texas.gov, and all submissions must be made through the Texas SmartBuy portal via the provided UI link. No set-aside status or NAICS code is listed, suggesting the opportunity is open to all qualified offerors without specific small business or socioeconomic preferences. Bidders are expected to respond by the stated deadline with proposals addressing the repair needs, parts supply, and associated service terms for the equipment at the designated location.

Health and Human Services Commission

POSTED

DEADLINE

Preventive Maintenance and Field Service SupportThe contract titled Preventive Maintenance and Field Service Support entails ongoing services for the upkeep, performance testing, and field repairs of vending machines, with requirements including quarterly inspections, software updates, and comprehensive service documentation to ensure operational reliability. These tasks are critical to maintaining system functionality and compliance across installed units, with all work performed under a subcontract structure tied to a Total Small Business Set-Aside classification under FAR 19.5, reserving eligibility exclusively for small businesses. The North American Industry Classification System code 811310 confirms the focus on miscellaneous repair and maintenance services, aligning the scope with institutional support roles rather than manufacturing or sales. The solicitation, posted on July 24, 2026, with a response deadline of August 17, 2026, is managed by the Nashville Area Indian Health Service under the U.S. Department of Health and Human Services, indicating the services support health-related facilities where vending machines provide essential goods or services to patients and staff. While specific locations and contact details are not provided, performance is expected to occur wherever the agency's vending equipment is deployed, requiring contractors to operate efficiently across potentially dispersed or remote sites. All service activities must be thoroughly documented to ensure accountability, audit readiness, and consistent service standards throughout the contract term.

Nashville Area Indian Health Svc

POSTED

DEADLINE

Fuel System Preventive Maintenance ServicesThe contract entails the provision of annual preventive maintenance services for all fuel system components at the U.S. Embassy in Podgorica, including storage tanks, pumps, filters, transfer systems, and associated controls. The work must be performed to ensure the continued safety, operational reliability, and full compliance with manufacturer specifications and environmental regulations, maintaining the integrity of critical fuel infrastructure essential to embassy operations. All maintenance activities are required to meet stringent standards to prevent downtime, mitigate hazards, and uphold federal and host nation compliance requirements. This subcontract opportunity is posted with a response deadline of August 17, 2026, and is categorized under NAICS code 811310 for industrial and commercial machinery and equipment repair and maintenance. The place of performance is firmly established in Podgorica, Montenegro, with the U.S. Department of State’s Embassy serving as the contracting entity. While no set-aside provisions or specific point of contact details are provided, interested parties must submit proposals prior to the stated deadline to be considered for award, with performance expectations centered on precision, regulatory adherence, and uninterrupted system functionality.

US Embassy Podgorica

POSTED

DEADLINE

Refrigeration System Leak Detection and Repair ServicesThe contract titled Refrigeration System Leak Detection and Repair Services is a subcontract set aside exclusively for Service-Disabled Veteran-Owned Small Businesses under FAR 19.14, targeting NAICS code 811310 for appliance repair and maintenance. Contractors are required to perform comprehensive diagnostic testing to locate refrigerant leaks in HVAC and refrigeration systems, repair or replace malfunctioning components, properly evacuate the system of air and moisture, and recharge it with the correct type and quantity of refrigerant. All work must include final performance verification to ensure the system operates efficiently and meets specified standards after repair. This opportunity was posted on July 24, 2026, with a firm response deadline of July 27, 2026, and is managed by the 246-NETWORK Contracting Office 6 within the Department of Veterans Affairs. While specific performance locations and point of contact details are not provided, the contract enforces strict compliance with industry best practices for refrigerant handling and system integrity. Only qualified SDVOSB entities are eligible to respond, emphasizing the federal commitment to supporting veteran-owned small businesses through targeted contracting opportunities.

246-NETWORK Contracting Office 6 (36C246)

POSTED

DEADLINE

CO₂ Fire Suppression System Inspection and MaintenanceThe contract involves the annual inspection and maintenance of a CO₂ fire suppression system serving nine cylinders, requiring comprehensive evaluations including weight verification, visual examinations, and functional testing of critical components such as pipe integrity, pressure switches, alarms, and pull cables. All nine hoses associated with the system must be replaced as part of the required maintenance, ensuring continued operational reliability and safety compliance. The work is governed under a Small Business Set-Aside designation, reserved exclusively for small businesses as defined by the SBA, and is classified under NAICS code 811310 for industrial and commercial equipment and machinery repair and maintenance. The solicitation was posted on July 24, 2026, with a response deadline of July 31, 2026, and is administered by the Department of Homeland Security’s Sflc Procurement Branch 2. The performance location is specified with a zip code of 04841, though the exact city and state are not provided.

Sflc Procurement Branch 2(00085)

POSTED

DEADLINE

On-Site Installation and Training ServicesThe contract entails the delivery, setup, and on-site training for clinical staff at the Minneapolis VAHCS regarding the proper operation and safety protocols for wheelchair scissor lifts. Services are to be performed directly at the facility located in Minneapolis with a ZIP code of 55417, ensuring that personnel are fully competent in using the equipment safely and efficiently. The work falls under NAICS code 811310, indicating it involves other miscellaneous repair and maintenance services, and is structured as a subcontract. The opportunity was posted on July 24, 2026, with a response deadline of July 31, 2026, at 9:00 PM, allowing interested vendors a short window to submit proposals. The contracting authority is the Department of Veterans Affairs through the Network Contract Office 23, and the performance location is fixed at the Minneapolis facility with no flexibility in location. No set-aside type is specified, meaning the contract is open to all eligible contractors regardless of business size or ownership category.

Network Contract Office 23 (36C263)

POSTED

DEADLINE

Repair and On-Call Service SupportThe contract requires provision of emergency repair services for dishwashing machines with a guaranteed response time of no more than 48 hours from the time of service request. All necessary parts, labor, and travel expenses are included in the scope of work, except for damages resulting from negligence by the Government. The services are to be performed at the designated location in Panama City, with the contractor responsible for ensuring timely and effective restoration of equipment functionality. This is a subcontract under the North American Industry Classification System code 811310, issued by the Department of Defense through the Naval Supply Systems Command Fleet Logistics Center Jacksonville. Proposals must be submitted by the deadline of August 17, 2026, and the opportunity was posted on July 24, 2026, with no set-aside provisions specified.

Navsup Flt Logistics Ctr Jacksonville

POSTED

DEADLINE

More opportunities from Department Of Defense → Navsup Flt Logistics Ctr Yokosuka

Same awarding agency

IT Security and Data Safeguarding ComplianceThe contract requires full compliance with Department of Defense safeguarding standards for contractor information systems, focusing on the protection of sensitive data and the secure operation of software and connected systems. All work must align with DoD cybersecurity requirements to ensure that information systems handling sensitive or controlled unclassified information meet rigorous security controls, including access management, encryption, audit logging, and vulnerability mitigation. The effort is specifically tied to operations at Yokosuka, Japan, and is structured as a subcontract under the NAICS code 541512 for computer systems design services. Submission must be completed by the deadline of August 3, 2026, with performance expected to support the Naval Supply Systems Command Fleet Logistics Center Yokosuka, a Department of Defense entity. While the solicitation does not specify a set-aside category or point of contact, the location of performance and the nature of the work indicate a critical need for secure, locally executed IT infrastructure management that adheres to strict federal defense protocols. Noncompliance with DoD safeguarding standards will constitute a material breach, and the successful offeror must demonstrate proven capability in implementing and maintaining compliant systems in a military operational environment.

Computer Systems Design Services

POSTED

DEADLINE

Personnel Training and Knowledge TransferThe contract calls for hands-on training and knowledge transfer to government personnel focused on the operation, maintenance, and troubleshooting of IC systems. Training must be delivered in a practical, immersive format to ensure participants gain proficiency in system functions and can independently manage routine and complex issues. The work is scoped as a subcontract under the NAICS code 611430, which corresponds to professional and management development training, and is being managed by the Naval Supply Systems Command Fleet Logistics Center Yokosuka, a Department of Defense entity. Performance of the training activities is required to occur in Yokosuka, indicating the need for on-site instruction to personnel deployed or stationed in that region. The solicitation was posted on July 24, 2026, with a firm response deadline of August 3, 2026, at 1:00 AM, leaving a limited window for qualified providers to submit proposals. There is no specified set-aside classification, meaning the opportunity is open to all eligible subcontractors regardless of business size or certification status.

Professional and Management Development Training

POSTED

DEADLINE

Operational Testing and Performance ValidationThe contract pertains to the on-site performance verification of an IC system under controlled environmental conditions, with government personnel present to witness and validate the testing procedures. The work is to be conducted in Yokosuka, Japan, under the oversight of the Naval Supply Systems Command Fleet Logistics Center Yokosuka, a Department of Defense entity. The contract is classified as a subcontract and falls under the NAICS code 541380, indicating it involves professional, scientific, and technical services related to systems integration and technical evaluation. The solicitation was posted on July 24, 2026, and responses must be submitted by August 3, 2026, at 1:00 AM, with no set-aside provisions specified. All performance testing must be executed in an environment that replicates real-world operational parameters, with the full transparency and documentation required by federal oversight.

Testing Laboratories and Services

POSTED

DEADLINE

On-Site Installation and Integration ServicesThe contract calls for the physical installation and integration of an IC system at the naval facility in Yokosuka, involving uncrating of equipment, precise positioning, and connection of all necessary utilities to ensure full operational readiness. This work must be performed on-site by a qualified subcontractor under the oversight of the Naval Supply Systems Command Fleet Logistics Center Yokosuka, part of the Department of Defense, with a strict deadline for submission of responses by August 3, 2026. The task requires technical expertise in handling sensitive military-grade systems and adherence to facility-specific protocols for safety, security, and environmental compliance during setup and utility connectivity. The North American Industry Classification System code 811212 applies, indicating that the work falls under repair and maintenance services for commercial and industrial machinery and equipment, and is designated as a subcontract opportunity without specific set-aside status. Performance is required exclusively at the Yokosuka location, and all activities must be completed in manner that meets military standards for reliability and durability. Interested parties must prepare detailed proposals outlining their capabilities, personnel qualifications, equipment, and timeline to ensure seamless integration of the IC system without disrupting ongoing naval operations.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Ion Chromatography (IC) System Supply and DeliveryThe contract entails the procurement and delivery of a fully configured Ion Chromatograph system meeting precise technical and physical specifications, intended for use by the Naval Supply Systems Command Fleet Logistics Center Yokosuka under the Department of Defense. The system must be delivered in a ready-to-operate state, complying with all performance, calibration, and environmental requirements outlined in the solicitation, with performance expected to occur in Yokosuka, Japan. The opportunity is structured as a subcontract with a NAICS code of 334516, indicating classification within the other measuring and controlling device manufacturing category. Responses are due by August 3, 2026, at 1:00 AM, following a posted date of July 24, 2026, providing potential vendors a limited window to submit proposals. No set-aside designation or agency point of contact is specified, and the contract does not indicate any geographical restrictions beyond the place of performance. The solicitation is accessible through the SAM.gov portal, though no additional details regarding payment terms, warranties, or installation obligations are provided in the summary data.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Ion Chromatograph system procurement for US Naval base in JapanThe U.S. Navy is seeking to procure an Ion Chromatograph system for the Ship Repair Facility and Japan Regional Maintenance Center at US Naval Base Yokosuka, Japan, under solicitation N6264926QB072. Only entities duly authorized to operate and conduct business in Japan are eligible to respond, as mandated by DFARS 252.225-7042, and prime contractors based outside Japan must provide unambiguous documentation proving compliance, such as proof of incorporation. All submissions must strictly follow the solicitation instructions, as incomplete, ambiguous, or noncompliant offers may be rejected without consideration. The solicitation was posted on July 24, 2026, with responses due by August 3, 2026, and falls under NAICS code 334516 for analytical laboratory instrument manufacturing. Performance is designated for Yokosuka, Kanagawa, Japan, while the contracting office is located at the Naval Supply Systems Command Fleet Logistics Center Yokosuka, with POC Yoko Yamaguchi available for inquiries at yoko.yamaguchi.ln@us.navy.mil.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

USS RUSHMORE (LSD-47) 7C1 SRA 52pkgThe contract amendment revises the Production Completion Date for all 52 Item Control Numbers across the requirement package for the USS RUSHMORE (LSD-47) 7C1 SRA project, with updated specifications and attachments accessible via DoD SAFE. Section C has been modified to include enhanced guidance on Schedule Management and Milestone PW42 Reporting, while Section J has been updated to replace Attachment (1) with the revised SRF-JRMC Det. Sasebo Work Specifications covering all 52 ICNs and Attachment (5) with its revised version labeled RUS 7C1 SRA PERL (Rev. 1). Proposals must be submitted electronically by 10:00 hrs on July 29, 2026, to the designated point of contact, with submission via DoD SAFE permitted only if file sizes exceed email limitations. The contract is firm-fixed-price, with evaluation based on Technical acceptability as a gate, followed by Past Performance and Price, where trade-offs may lead to selection of a higher-priced or lower-rated offeror if overall value is superior. Performance is to occur at Sasebo Naval Base, Japan, with a period of performance from October 12, 2026, to July 31, 2027, and delivery governed by F.O.B. Destination terms. Contract administration requires invoicing through WAWF with the Invoice 2in1 document type, and payment routing is handled via designated DoDAACs. Quality and inspection standards include ISO 9001:2015 and NAVSEA 009-04, with contractor responsibility to provide Test and Inspection Plans and Objective Quality Evidence, and to notify the Government 24 hours in advance of inspections. Packaging and marking must comply fully with MIL-STD-129 and MIL-STD-130, including Unique Item Identifier (UII) encoding via Data Matrix symbols following ISO/IEC 15434 and ANSI MH10.8.2 standards. Special requirements mandate compliance with 29 CFR 1915 for shipyard safety, mandatory extension of commercial warranties at no additional cost, and strict limitation on dissemination of Controlled Unclassified Information to authorized Navy and DoD personnel only. All offerors must complete mandatory representations and certifications, including those related to executive compensation, prohibited payments, and covered telecommunications equipment, though no completed submissions are contained within the provided documentation.

Ship Building and Repairing

POSTED

DEADLINE

IT and Cybersecurity Support for System IntegrationThe contract supports IT access management, control system integration, and cybersecurity compliance activities critical to the SEDG installation process, with specific focus on SAAR-N processing, CAC coordination, and privileged access management. It requires seamless coordination of identity verification, system integration, and adherence to cybersecurity standards to ensure secure and authorized access throughout the deployment lifecycle. The work is tied to physical and technical infrastructure upgrades at the Sasebo location, necessitating on-site technical expertise and strict compliance with DoD security protocols. This subcontract falls under NAICS code 541512 for computer systems design services and is issued by the Naval Supply Systems Command Fleet Logistics Center Yokosuka under the Department of Defense. The solicitation was posted on July 23, 2026, with proposals due by August 24, 2026. Performance will be executed primarily at Sasebo, where contractors must align with local operational demands and infrastructure constraints. While details on set-aside status and point of contact are not provided, the scope demands specialized knowledge in defense information systems and secure access control procedures to meet mission-critical cybersecurity objectives.

Computer Systems Design Services

POSTED

DEADLINE

Lay Down and Storage Services at SRF-JRMCThe contract entails the provision of temporary lay down space near the Sasebo shipyard for the storage and handling of generator components, tools, and related materials, with full logistics coordination and on-site management responsibilities. The services are intended to support operational readiness by ensuring secure, organized, and accessible storage areas that facilitate efficient movement and staging of critical equipment in proximity to shipyard activities. The contractor must manage daily site operations, including security, inventory control, workspace organization, and coordination with shipyard personnel to meet timeline demands. This subcontract is issued under NAICS code 531120 and falls under the purview of the Naval Supply Systems Command Fleet Logistics Center Yokosuka, an agency within the Department of Defense. The opportunity was posted on July 23, 2026, with a response deadline of August 24, 2026, and performance will be executed exclusively at the designated location in Sasebo, Japan, with a zip code of 8570063. While no set-aside designation is specified, the contract requires a qualified bidder capable of delivering integrated storage and logistics services under defense contracting standards, with an emphasis on reliability, compliance, and seamless integration with ongoing shipyard operations.

Lessors of Nonresidential Buildings (except Miniwarehouses)

POSTED

DEADLINE

Standby Emergency Diesel Generator (SEDG) Installation and CommissioningThe contract mandates the full installation, integration, testing, and commissioning of a Standby Emergency Diesel Generator aboard the USS NEW ORLEANS (LPD-18), requiring comprehensive rigging, electrical and mechanical connections, and seamless control system integration to ensure operational readiness. The work must be performed in accordance with military specifications and safety standards, ensuring the generator functions reliably as a critical backup power source during emergencies. All components must be installed, aligned, and tested in place to meet stringent naval requirements for performance, durability, and environmental resilience. The subcontract is issued under NAICS code 238220 and is tied to the Department of Defense through Navsup Flt Logistics Ctr Yokosuka, with the place of performance designated as Sasebo, Japan, at a zip code of 8570063. The solicitation was posted on July 23, 2026, and responses are due by August 24, 2026, at 1:00 AM. The project demands a high level of technical expertise, coordination with existing shipboard systems, and adherence to strict timelines and quality controls to support the vessel’s mission-critical infrastructure without disruption to ongoing operations.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

USNS RAPPAHANNOCK (T-AO 204) MID-TERM AVAILABILITY (MTA) FY27The contract pertains to the completion of the Mid-Term Availability Requirement for USNS RAPPAHANNOCK (T-AO 204) under Military Sealift Command specifications, ensuring the vessel maintains operational readiness through scheduled maintenance and system evaluations during Fiscal Year 2027. The solicitation, identified as N6264926RL016, was posted on July 23, 2026, with responses due by August 24, 2026, and falls under NAICS code 336611 for shipbuilding and repair. Work is to be performed by the Naval Supply Systems Command Fleet Logistics Center Yokosuka, a U.S. Department of Defense organization based in FPO, AP, with Gerry Polohanan designated as the primary point of contact for inquiries and coordination. The contract does not specify a particular place of performance, indicating work may occur at multiple locations as dictated by the vessel’s operational status and availability windows. Solicitation attachments, including the official Work Index Report, are not included in the public posting due to file size constraints and must be requested directly.

Ship Building and Repairing

POSTED

DEADLINE

Standby Emergency Diesel Generator (SEDG); provideThe solicitation calls for the provision of a Standby Emergency Diesel Generator (SEDG) under contract number N6264926Q0485, with proposals due by August 24, 2026. Only offerors authorized to operate and conduct business in Japan are eligible, and all bidders must comply with DFARS 252.225-7042, requiring non-Japan-based firms to document their compliance. A current active U.S. Navy MSRA/ABR Agreement in the Japan Region is mandatory for award eligibility; applicants without one must submit proof of an approved agreement or risk disqualification unless sufficient time exists for the Navy to process and execute a new agreement without delaying vessel availability. Contractors outside Japan must provide unambiguous evidence of compliance with the regulation as part of their proposal. The work is to be performed in Sasebo, Nagasaki, Japan, and the contracting office is the Naval Supply Systems Command Fleet Logistics Center Yokosuka, located in FPO, AP. Primary point of contact is David Brudnok, reachable via email at david.p.brudnok.civ@us.navy.mil. The NAICS code is 336611, and no set-aside designation is applied to this solicitation.

Ship Building and Repairing

POSTED

DEADLINE