Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Telematics Hardware Installation Services

Active

Federal

Response Deadline07/20/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the physical installation of telematics hardware into government vehicles, with a focus on seamless OBD-II integration and secure device mounting that maintains full access to vehicle diagnostic systems. All work must be performed to ensure no interference with original equipment functionality, preserving the vehicle’s ability to receive and transmit diagnostic data for maintenance and compliance purposes. The installation will occur at the designated place of performance in Nakagami-gun, requiring contractors to adhere to strict technical specifications and quality standards for hardware deployment. This subcontract opportunity, issued by the General Services Administration’s GSA/FAS Automotive Center, was posted on July 7, 2026, with responses due by July 20, 2026. The North American Industry Classification System code 811111 indicates this effort falls under automotive repair and maintenance services. There is no set-aside designation specified, and the contract does not list a point of contact or detailed office address, but interested parties should submit proposals through the official SAM.gov portal before the deadline to be considered for award.

General Info

Install telematics hardware in government vehicles via OBD-II at Nakagami-gun with strict technical compliance.

Agency

General Services Administration → Gsa/fas Automotive CenterView Agency

NAICS

811111 - General Automotive RepairView NAICS

Place of Performance

Nakagami-gun, JP-47, JPN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 7

subcontract

Response DeadlineJul 20

Submission deadline

Response Deadline

07/20/2026, 09:00:00 PM UTCin 2 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGeneral Services Administration → Gsa/fas Automotive Center

ContactsNo contacts available

OfficeN/A

Organization / Agency

General Services Administration → Gsa/fas Automotive Center

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Physical installation of telematics hardware into government vehicles, including OBD-II integration and device mounting while preserving diagnostic access.

Similar Contracts

Same NAICS industry code

Vehicle and Equipment MaintenanceThis contract pertains to the repair and servicing of motor vehicles and mobile equipment utilized in facility operations, specifically targeting support needs at Wright Patterson Air Force Base. The work involves maintaining a fleet of vehicles and machinery essential for daily facility functions, ensuring operational readiness and safety. The solicitation is classified as a subcontract under NAICS code 811111, indicating it falls within the automotive repair and maintenance industry. The opportunity was posted on July 17, 2026, with responses due by 3:00 PM on July 31, 2026. The contracting activity is managed by the Department of Defense through the FA8601 Aflcmc Pzio office, though no specific point of contact or set-aside details are provided. Performance is required at the designated facility location, and interested parties must submit proposals prior to the deadline to be considered for award.

FA8601 Aflcmc Pzio

POSTED

about 23 hours ago

DEADLINE

Fire Truck Repair and Maintenance

W6QM Micc-Ft Jackson

POSTED

about 23 hours ago

DEADLINE

Transit Maintenance Program ManagementThe contract titled Transit Maintenance Program Management seeks a subcontractor to oversee preventive and corrective maintenance programs for transit vehicles under the Cape Cod Regional Transit Authority. The primary objective is to ensure fleet reliability, operational readiness, and strict adherence to safety standards across all serviced vehicles. Maintenance activities must be conducted in accordance with industry best practices and regulatory requirements to minimize vehicle downtime and maximize service continuity for the region’s public transportation network. The work is focused in Hyannis, Massachusetts, with a zip code of 02601, and the contractor will be expected to manage all aspects of maintenance scheduling, technical inspections, repairs, parts procurement, and staff coordination to support daily transit operations. This subcontract, classified under NAICS code 811111, is open for bids with a response deadline of August 14, 2026, and was posted on July 17, 2026. The contracting entity is the Cape Cod Regional Transit Authority, operating under the state of Massachusetts, and the subcontractor will be responsible for delivering maintenance services at the designated performance location without requiring remote or mobile support from other sites. Although no set-aside provisions or specific organizational type requirements are indicated, the scope demands proven experience in transit vehicle maintenance, a strong understanding of safety compliance protocols, and the ability to manage logistics efficiently in a high-volume, time-sensitive environment. All work must align with the authority’s operational goals and regulatory obligations to serve the commuting public reliably and safely.

CCRTA - Cape Cod Regional Transit Authority

POSTED

DEADLINE

Fleet Maintenance and Vehicle Repair ServicesThe City of Reidsville in Georgia is seeking a subcontractor to provide comprehensive preventive maintenance, repairs, and parts supply for its fleet of garbage trucks and supporting vehicles to maintain uninterrupted waste collection operations. This contract requires consistent and reliable service to ensure all vehicles remain in optimal working condition, minimizing downtime and maximizing operational efficiency. The work will involve routine inspections, scheduled servicing, diagnostic troubleshooting, component replacements, and swift corrective repairs as needed, with access to genuine or approved aftermarket parts to meet performance and safety standards. The solicitation is open for submissions with a response deadline of August 31, 2026, and is classified under NAICS code 811111 for automotive mechanical and electrical repair and maintenance. The contract is structured as a subcontract, and while no specific set-aside criteria are indicated, interested vendors must be prepared to meet the operational demands of a municipal fleet with high usage and critical service expectations. The place of performance is tied to the City of Reidsville, requiring the contractor to be responsive and capable of timely on-site service across local collection routes. Interested parties can access further details through the provided state procurement portal link.

City of Reidsville

POSTED

DEADLINE

in about 1 month

Aircraft Unscheduled & AOG Repair ServicesTexas A&M University System is seeking qualified subcontractors to provide emergency troubleshooting, diagnostics, and rapid-response repairs for aircraft experiencing unscheduled mechanical failures across the continental United States. The contract, titled Aircraft Unscheduled & AOG Repair Services, is classified under NAICS code 811111 and is structured as a subcontract opportunity with a response deadline of August 14, 2026. The services required must ensure immediate resolution of aircraft-on-the-ground (AOG) situations to minimize operational downtime, with responders expected to deploy swiftly to any location within the continental U.S. as needed. All work must comply with aviation safety and maintenance standards, and contractors must demonstrate proven capability in high-stakes, time-sensitive aircraft repair environments. The solicitation is posted on the Texas SmartBuy platform with no set-aside provisions specified, and responses are to be submitted through the provided online portal.

Texas A&M University System

POSTED

DEADLINE

Aircraft Scheduled Maintenance ServicesTexas A&M University System is seeking qualified contractors to provide scheduled maintenance services for Cessna Citation XLS and Beechcraft King Air aircraft, encompassing routine inspections, preventive maintenance, and compliance checks aligned with FAA regulations and manufacturer guidelines. The work must ensure airworthiness and operational readiness through adherence to standardized protocols and documented procedures, with all tasks performed by certified technicians using approved parts and methods. The contract is classified as a subcontract under NAICS code 811111, and responses are due by August 14, 2026, with the opportunity posted on July 16, 2026. All performance will be carried out in accordance with federal aviation standards and the university’s operational requirements, though specific location details for the place of performance are not provided. Contractors must demonstrate experience with the specified aircraft models and hold appropriate certifications to support compliance and safety obligations.

Texas A&M University System

POSTED

DEADLINE

Statewide Service and Warranty Support Network

POSTED

DEADLINE

Vehicle Maintenance and Fleet Support Services

249-NETWORK Contract Office 9 (36C249)

POSTED

DEADLINE

TRAILER SAFETY INSPECTION

Arizona State Office

POSTED

DEADLINE

Mechanical and Automotive Equipment Installation

City of El Monte

POSTED

DEADLINE

Vehicle Maintenance & Service Support (Post-Delivery)

POSTED

DEADLINE

Mobile Refueling Asset Supply and MaintenanceThe contract requires the supply, ongoing maintenance, and repair of mobile refueling units owned by the contractor, ensuring full compliance with MIL-STD-3004, NFPA 30, and NFPA 385 standards. These units must be maintained to guarantee 24/7 operational readiness to support military logistics and fueling operations under all conditions. The work encompasses all aspects of unit lifecycle management including inspections, preventive maintenance, corrective repairs, and compliance documentation, with an emphasis on safety, reliability, and continuous availability. All activities must adhere to federal hazardous materials and fuel handling regulations to ensure environment and personnel safety. The contract is classified as a subcontract under NAICS code 811111 and is issued by the Department of Defense through BULK PETROLEUM SERVICES. It was posted on July 15, 2026, with responses due by August 31, 2026. Performance will occur at locations determined by operational needs, likely at military installations or forward operating bases, requiring the contractor to maintain flexible logistical support capabilities. No specific geographic location or set-aside classification is indicated, allowing qualified vendors to compete without geographic or small business restrictions, though full compliance with defense-grade standards and emergency response capabilities will be critical for award.

BULK PETROLEUM SERVICES

POSTED

DEADLINE

in about 1 month

More opportunities from General Services Administration → Gsa/fas Automotive Center

Same awarding agency

Indemnification & Audit Support Services

Administrative Management and General Management Consulting Services

POSTED

about 23 hours ago

DEADLINE

Fleet Reporting & Program Support

Administrative Management and General Management Consulting Services

POSTED

about 23 hours ago

DEADLINE

Commercial Supplier Agreement Compliance & Legal Review

Offices of Lawyers

POSTED

about 23 hours ago

DEADLINE

Vehicle Configuration & Customization Services

All Other Automotive Repair and Maintenance

POSTED

about 23 hours ago

DEADLINE

Fleet Order Management & System Integration

Computing Infrastructure Providers, Data Processing, Web Hosting, and Related Services

POSTED

about 23 hours ago

DEADLINE

Commercial Vehicle Supply (New Fleet Vehicles)

Stationery and Office Supplies Merchant Wholesalers

POSTED

about 23 hours ago

DEADLINE

Chevy Suburban High Country (QTY: 1)

Automobile and Light Duty Motor Vehicle Manufacturing

POSTED

about 23 hours ago

DEADLINE

Telematics Japan InstallationsThis solicitation, numbered 47QMCA26Q0058, is a combined synopsis and request for quotes for commercial telematics installation services across multiple military and government locations in Japan, issued under FAR Part 12 as a firm-fixed-price Blanket Purchase Agreement. The contract requires the contractor to provide all personnel, tools, materials, and logistics necessary to install Geotab GO9 telematics devices on a diverse fleet of vehicles—including sedans, light, medium, and heavy-duty trucks, buses, and specialty vehicles—at both government facilities and private locations throughout Japan, with installations also permitted pre-delivery at supplier sites. The period of performance extends from on or before August 13, 2026, through January 31, 2029, with an option to extend services for up to six additional months. The place of performance is defined in Appendix A, and delivery is F.O.B. destination. The contractor is responsible for all travel costs and must comply with stringent security and identity verification protocols, including Personal Identity Verification (PIV) requirements for access to military installations. All pricing must be submitted in U.S. dollars via Microsoft Excel, and proposals must adhere to strict format guidelines, including three volumes: a signed cover letter, a technical capability statement (max 10 pages), and a past performance summary (max 5 pages). The solicitation prohibits the use of generative AI in quote preparation and requires full compliance with SAM.gov registration, UEI inclusion, and specific certifications regarding payments, whistleblower rights, human trafficking, privacy training, and prohibitions on internal confidentiality agreements. The award will be made on a lowest price technically acceptable basis to a responsible offeror that meets all Government requirements, with technical acceptability serving as a mandatory pass/fail gate. The Government intends to establish a single-award BPA, with contract line-item numbers specified in the schedule, including optional quantities for additional installations. Invoicing must be submitted electronically by the 26th of each month for the prior month’s services, accompanied by a detailed CSV or XLS file containing mandatory data elements such as CLIN, VIN, device serial number, GSA license plate, and payment terms. Contract administration is overseen by the Contracting Officer Charlene Cardenas and the Contracting Officer’s Representative William Toth, who will coordinate a mandatory virtual project kick-off meeting within two weeks of award to review terms, technical requirements, management protocols, and reporting procedures. The contractor must implement

All Other Automotive Repair and Maintenance

POSTED

DEADLINE

Logistics and Field Coordination SupportThe contract requires comprehensive on-the-ground logistics and field coordination support for installation teams operating across multiple U.S. military bases in Japan, with a primary focus on Nakagami-gun. Responsibilities include managing the scheduling of personnel and equipment, tracking the movement and delivery of shipments, and providing timely status updates to ensure mission-critical installations proceed without disruption. The work demands a high degree of operational precision, real-time communication, and adaptability to the unique logistical challenges of military environments in a foreign theater, all while maintaining strict adherence to security and compliance protocols. This is a subcontract under NAICS code 488510, which pertains to courier and express delivery services, indicating the critical role of transportation and supply chain management in executing the scope. It is being managed by the General Services Administration’s GSA/FAS Automotive Center, and responses must be submitted by July 20, 2026. The location of performance is centered in Japan, necessitating familiarity with regional infrastructure, customs procedures, and coordination with U.S. and local military authorities. Successful performers will need to demonstrate proven experience in supporting complex defense installations abroad, with the ability to maintain continuous operational visibility under demanding conditions.

Freight Transportation Arrangement

POSTED

DEADLINE

Telematics Hardware SupplyThe contract involves the supply of telematics hardware units that must fully comply with GSA specifications, ensuring compatibility, performance, and security standards required by federal operations. All units must include full traceability from manufacturing through delivery, with documented provenance and quality control records to meet federal procurement and accountability requirements. Comprehensive warranty support is mandatory, covering defects, malfunctions, and necessary repairs or replacements throughout the agreed support period, with clear service level commitments to minimize downtime and maintain operational continuity. The procurement is structured as a subcontract under NAICS code 334510, targeting the manufacturing of navigational, mechatronic, and telemetry control instruments. The place of performance is located in Nakagami-gun, indicating that delivery or installation activities are expected to occur in that region, though the contracting agency, the General Services Administration’s FAS Automotive Center, remains the overseeing entity. The opportunity was posted on July 7, 2026, with responses due by July 20, 2026, providing a two-week window for qualified vendors to submit proposals. While no set-aside designation or point of contact is specified, interested parties must navigate the SAM.gov portal to access full submission guidelines and ensure alignment with GSA’s technical and compliance expectations.

Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

DEADLINE

Acceptance Testing and Final DocumentationThe contract involves the final testing of installed telematics systems and the comprehensive compilation of supporting documentation, including accurate serial-VIN alignment, detailed installation reports, and verification of regulatory compliance. This work is critical to ensuring that all systems meet operational and legal standards prior to acceptance. The scope requires rigorous validation procedures to confirm system functionality and data integrity across all deployed units. The contract is classified as a subcontract under NAICS code 541330, awarded by the General Services Administration through its GSA/FAS Automotive Center. The place of performance is located in Nakagami-gun, though no specific city or state details are provided. The solicitation was posted on July 7, 2026, with a response deadline of July 20, 2026, indicating a tight turnaround for submissions. There is no set-aside designation specified, and no point of contact information is available within the provided data.

Engineering Services

POSTED

DEADLINE

Software Configuration and System IntegrationThe contract entails the configuration of telematics software and its integration with the General Services Administration’s central fleet management platform, requiring secure API connectivity and the setup of user access permissions to enable seamless data exchange and operational control. The work involves tailoring the software to align with GSA’s existing systems, ensuring real-time vehicle tracking, diagnostic reporting, and fleet performance analytics are accurately transmitted and accessible to authorized personnel. Performance of the work is designated to Nakagami-gun, and the contract is classified as a subcontract under NAICS code 541512, indicating it falls within computer systems design and related services. The opportunity was posted on July 7, 2026, with a response deadline of July 20, 2026, and is managed by the GSA/FAS Automotive Center, which oversees federal fleet operations. There is no set-aside designation indicated, and the point of contact information is not provided in the available data.

Computer Systems Design Services

POSTED

DEADLINE