Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Vehicle Testing and Engineering Certification

Active

Federal

Response Deadline12/31/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for the GSA FAS Automotive Center involves providing independent engineering validation and safety testing for prime contractors. The scope of work focuses on verifying the structural integrity of wheelchair conversions through the use of structural testing rigs and load-bearing measurement tools, specifically conducting pull tests and NTA ultramods. The primary objective is to certify that these conversions comply with Federal Vehicle Standards as well as DOT and NHTSA regulations, culminating in the delivery of detailed engineering certification reports and test results. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 541330. It was posted on May 27, 2026, with a response deadline of December 31, 2026. The contract is managed by the General Services Administration.

General Info

Subcontract for GSA automotive engineering validation and safety testing of wheelchair conversions.

Agency

General Services Administration → Gsa/fas Automotive CenterView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

DC, USA

Set-Aside

SBA

Documents

This scope was carved out of 47QMCA24R00034WC.

The full solicitation package (4 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

2025- Wheelchair Accessible Light Vehicles Program

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedMay 27

subcontract

Response DeadlineDec 31

Submission deadline

Response Deadline

12/31/2026, 09:00:00 PM UTCin 4 months

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGeneral Services Administration → Gsa/fas Automotive Center

ContactsNo contacts available

OfficeN/A

Organization / Agency

General Services Administration → Gsa/fas Automotive Center

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs independent engineering validation and safety testing for prime contractors on GSA FAS Automotive Center projects. Conducts pull tests and NTA ultramods using structural testing rigs and load-bearing measurement tools to verify structural integrity of wheelchair conversions. Certifies compliance with Federal Vehicle Standards and DOT/NHTSA regulations. Delivers engineering certification reports and test results.

Similar Contracts

Same NAICS industry code

Scattergood GS. Units 1&2 Green Hydrogen-Reaady Modernization

Solicitation # scattergood-gs-units-12-green-hydrogen-reaady-modernization

Kiewit Infrastructure West Co. is soliciting sub-quotes for the Scattergood GS Units 1&2 Green Hydrogen-Ready Modernization project for the City of Los Angeles Department of Water and Power. The scope of work is extensive, encompassing professional and technical services such as civil, structural, mechanical, electrical, and instrumentation and controls engineering, as well as utility locating, geotechnical and geophysical investigations, BIM/3D modeling, and land surveying. Additionally, the project requires support for environmental assessments, permitting, hazardous materials surveys, and CPM scheduling. This solicitation specifically encourages participation from certified Disadvantaged Business Enterprises, including MBE, WBE, and OBE firms. Interested bidders must contact Kiewit to receive an Invitation to Bid via the Building Connected system, with a response deadline of September 11, 2026. Qualified firms must possess a valid California Contractor's license and provide acceptable insurance. Furthermore, responsible subcontractors and material contractors are required to provide bonding for 100 percent of their contract value, though Kiewit will reimburse the bond premiums. Bidders must also demonstrate an ability to maintain labor harmony, as Kiewit is signatory to several collective bargaining agreements. Detailed plans and specifications are available for review at Kiewit's Costa Mesa, California office.

Kiewit Infrastructure West Co.

POSTED

about 3 hours ago

DEADLINE

SEEKING QUALIFIED SUBCONSULTANTS IN RIVERSIDE COUNTY/SOCAL TO SUPPORT WELL REPLACEMENT PROJECT WITH WATER DISTRICT

Solicitation # seeking-qualified-subconsultants-riverside-countysocal-support-well-replacement-project-water

GHD Inc. is soliciting qualified subconsultants to support the Corydon Well Replacement Design Project for the Elsinore Valley Municipal Water District in California. The project seeks professional services including engineering, environmental analysis, surveying, geotechnical work, permitting, public outreach, and utility location. This opportunity is specifically open to Disadvantaged Business Enterprises, Small Business Enterprises, Women-Owned Business Enterprises, and Minority-Owned Business Enterprises. Interested firms must contact Charlie Brown via email to submit a qualifications package and request solicitation documents. The deadline for initial contact is August 7, 2026, with a final deadline for receiving solicitation documents by 5pm PST on Friday, August 14, 2026. Relevant NAICS codes for this effort include 541330, 237110, and 541490, among others.

POSTED

about 3 hours ago

DEADLINE

Roof Core Sampling and Moisture AnalysisThis subcontract for Roof Core Sampling and Moisture Analysis involves performing core sampling of the gymnasium roof at the Oneonta Job Corps Academy. The selected contractor will utilize drone footage to identify sampling locations, extract 4 by 4 inch or 2 inch round sections from the roof assembly, and log strata to determine material types and thickness. Additionally, the contractor is responsible for conducting laboratory analysis on all extracted samples to provide a comprehensive report on the roof condition and coating qualification. The project is managed by Education Training & Resources LLC and is set aside for various small business categories, including SDB, WOSB, HUBZone, and Veteran-Owned businesses. To be eligible, contractors must possess New York State licensing, maintain active SAM registration, and ensure full compliance with Davis-Bacon wage requirements. The response deadline for this opportunity is September 16, 2026.

Education Training & Resources LLC

POSTED

about 15 hours ago

DEADLINE

MEP Systems Damage AssessmentThis subcontract opportunity with Management and Training Corporation involves performing a comprehensive MEP Systems Damage Assessment at the Hawaii Job Corps Center Maui. The selected contractor will evaluate mechanical, electrical, and plumbing systems, specifically assessing HVAC, kitchen hood fire suppression systems, service entrances, and electrical panels using specialized tools like moisture meters and electrical testers. The final deliverables include a detailed MEP condition report and associated repair cost estimates, all of which must comply with Hawaii building codes. Qualified candidates must be Licensed Professional Engineers in Electrical or Mechanical engineering. This opportunity is set aside for various small business categories, including SDB, WOSB, HUBZone, and Veteran-Owned Small Businesses, under NAICS code 541330. The solicitation was posted on September 6, 2026, with a response deadline of September 11, 2026.

Management & Training Corporation

POSTED

about 15 hours ago

DEADLINE

Structural Damage Assessment & Engineering AnalysisThis subcontract opportunity with Management and Training Corporation involves performing a detailed structural integrity evaluation for prime contractors at the Hawaii Job Corps Center Maui. The selected provider will conduct on-site assessments of roof framing, columns, and load-bearing walls utilizing borescopes and laser levels. All structural calculations must adhere to ATC-20 and FEMA P-758 standards, and the project requires a Licensed Professional Engineer to deliver a final construction cost estimate and structural integrity report. The solicitation is open to various small business set-asides, including SDB, WOSB, HUBZone, VOSB, and SDVOSB certifications under NAICS code 541330. The response deadline is September 11, 2026, for this specialized engineering analysis and damage assessment project.

Management & Training Corporation

POSTED

about 15 hours ago

DEADLINE

GIC SE3 TORFP 5147 Hardware Installation of C4ISR and Network related systems onboard USS Somerset (LPD 25) (C)This performance-based contract, managed by the Naval Information Warfare Systems under NIWC Pacific, involves the installation of C4ISR and network-related hardware onboard the USS Somerset (LPD 25). The work is scheduled to be performed in San Diego, California, under NAICS code 541330. The project is currently listed as a forecast with a posted date of September 6, 2026. Primary administrative oversight is provided by Contracting Officer Joaquin Sanchez and secondary point of contact Jessie Edwards.

POSTED

DEADLINE

0330 TACNET CBISEA Testing and Evaluation support for Communication as a Service (CaaS)The Naval Information Warfare Systems center, specifically Niwc Pacific, is forecasting a requirement for TACNET CBISEA Testing and Evaluation support for Communication as a Service. This effort falls under NAICS code 541330 and is intended to provide specialized technical support for the evaluation of communication services. The performance of this contract is expected to take place in San Diego. Primary administrative coordination is managed by Contracting Officer Bennett McDonald and Secondary Point of Contact Althea Kaneaster.

POSTED

DEADLINE

18989 LIPTM00463 PPR FOR FOEThis forecast contract, titled 18989 LIPTM00463 PPR FOR FOE, is issued by the Naval Information Warfare Systems under the Niwc Atlantic agency. The project is categorized under NAICS code 541330 and is slated for performance in Charleston. The primary point of contact for this requirement is Contracting Officer Tyler D. Rehwoldt, with David Felling serving as the secondary contact. This procurement is currently listed as a forecast with a posted date of September 6, 2026.

POSTED

DEADLINE

Order to Contract # N6600123D0014 - Depot RFP 0029 - Calibration Lab-Direct/Fleet SupportContract N6600123D0014, titled Calibration Lab-Direct/Fleet Support, is a forecast opportunity issued by the Naval Information Warfare Systems under Niwc Pacific. The project falls under NAICS code 541330 and is designated for performance in San Diego. The contract is managed by Contracting Officer Marianitojose Rosal, with Chito C. Paulo serving as the secondary point of contact. This acquisition is part of the Depot RFP 0029 and is listed as a forecast with a posted date of September 6, 2026.

POSTED

DEADLINE

RSNF inKSA Support Services (C4ISR) Upgrade and Refurbishment (C)The Naval Information Warfare Systems agency is forecasting a contract for the RSNF inKSA Support Services (C4ISR) Upgrade and Refurbishment. This project focuses on the enhancement and refurbishment of Command, Control, Communications, Computers, Intelligence, Surveillance, and Reconnaissance systems. The work is categorized under NAICS code 541330 and is slated for performance in San Diego. Kristin White serves as the primary Contracting Officer, with Magdalena Uriostigue acting as the secondary point of contact. The opportunity was posted on August 16, 2026, as a forecast to notify potential vendors of the upcoming requirement.

Naval Information Warfare Systems

POSTED

DEADLINE

CVN 75 RCOH RCS CSIF and Shipboard Integration (C)

Naval Information Warfare Systems

POSTED

DEADLINE

LIPTM00241 USCG IPT L-3 NEW TASK ORDER (SUSTAINMENT) - L3 NICHE SAC - N6523624D1014The USCG IPT L-3 New Task Order for sustainment is a forecast opportunity issued by the Naval Information Warfare Systems Command under Niwc Atlantic. This requirement, identified by number N6523624D1014, falls under NAICS code 541330 for engineering services and is slated for performance in Charleston. The procurement is managed by Contracting Officer Shannon Anderson and Secondary Point of Contact Charlotte Campbell. This action is part of a broader sustainment effort for the USCG IPT L-3, with a projected posting date in September 2026.

POSTED

DEADLINE

More opportunities from General Services Administration → Gsa/fas Automotive Center

Same awarding agency

Vehicle Recompete: MHWC — IDIQ MHWCThe MHWC is an Indefinite Delivery Indefinite Quantity (IDIQ) contract managed by the General Services Administration with a total ceiling value of 157,386,345.55 dollars. This full-recompete vehicle, identified under solicitation QMAE-EV-190002-D, is not subject to a specific set-aside and has an ordering period that extends through January 21, 2028. The contract primarily focuses on the procurement of heavy-duty vehicles, with significant task orders issued for 6X4 dump trucks and 4X2 stake or flatbed trucks. Key vendors providing these vehicles include Central Kenworth LLC and Fleetside Ford, LLC, with individual task order values ranging from approximately 2.4 million to 3.1 million dollars.

Heavy Duty Truck Manufacturing

POSTED

about 2 months ago

DEADLINE

Specialized Vehicle Component Supply (Lifts/Ramps)This subcontract opportunity with the GSA FAS Automotive Center involves the manufacture and delivery of specialized mechanical components to ensure wheelchair accessibility for prime contractors. The scope of work includes producing hydraulic or electric wheelchair lifts, securing systems, and aluminum or steel ramps. All components must strictly adhere to Title 36 ramp angle specifications as well as NHTSA and DOT federal regulations, with final delivery of certified equipment to the designated assembly point. The contract is designated as a Total Small Business Set-Aside under NAICS code 333999. Interested parties must submit their responses by the deadline of December 31, 2026. This procurement focuses on providing high-quality, compliant accessibility solutions to support the General Services Administration's automotive projects.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

DEADLINE

Wheelchair Conversion Services (Upfitting)This subcontract for the GSA FAS Automotive Center involves the conversion of commercially available light vehicles into wheelchair-accessible vehicles. The scope of work includes modifying vehicle chassis and interiors, installing ramps and lifts, and ensuring all modifications meet ADA requirements and Title 36 ramp angle specifications. The provider is responsible for delivering production-ready vehicles and performing critical engineering approvals, such as pull tests and NTA ultramods, while maintaining strict compliance with Federal Vehicle Standard 307BF. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 336411. It was posted on May 27, 2026, with a response deadline of December 31, 2026. The contract is managed by the General Services Administration to support prime contractors on automotive center projects.

Aircraft Manufacturing

POSTED

DEADLINE

2025- Wheelchair Accessible Light Vehicles Program

Solicitation # 47QMCA24R00034WC

Solicitation 47QMCA24R00034WC, managed by the GSA FAS Automotive Center, establishes the 2026 Fall Open Season for the Wheelchair Accessible Light Vehicles Program. This program allows existing contractors to provide Next Model Year information and enables both new and existing offerors to propose new models for the 2027 model year. The procurement is a Total Small Business Set-Aside under NAICS code 336211. All proposed vehicles must be commercial, production-ready, and tested, as prototypes are strictly prohibited. Compliance with 2027 federal standards, ADA requirements, and Title 36 ramp angle specifications is non-negotiable. Additionally, suppliers must meet engineering approval requirements, including pull tests and NTA ultramods. The Open Season process is conducted in three rounds, with Round 1 running from June 1 to July 30, 2026, and ordering opening in GSAFleet.gov on December 14, 2026. GSAFleet.gov serves as the primary system for bid proposals and contract administration. New vendors must follow a two-part submission process: providing technical data and pricing via GSAFleet.gov and emailing a multi-volume proposal to the contracting team, which includes Sharon Hamer, Pamela Dail, Eric VanderVeen, and Brandon Scharschell. New vendors must also submit Vendor Company and User Account Request forms to establish their system access. Evaluation for new proposals is based on responsiveness and technical acceptability, with all technical exceptions required during the evaluation phase. All offerors must maintain an active SAM.gov registration to remain eligible.

Motor Vehicle Body Manufacturing

POSTED

DEADLINE

Post-Delivery & Warranty Support Services

Automotive Exhaust System Repair

POSTED

DEADLINE

Specialized Component Supply (Vocational/Medical)

Other Motor Vehicle Parts Manufacturing

POSTED

DEADLINE

Specialized Vehicle Engineering & Compliance Support

Engineering Services

POSTED

DEADLINE

Vocational Vehicle Upfitting & Integration

Motor Vehicle Body Manufacturing

POSTED

DEADLINE

Emergency Lighting and Electrical Systems SupplierThis subcontract under the GSA/FAS Automotive Center involves the supply and installation of emergency warning lights, sirens, and electrical wiring harnesses for prime contractors participating in the 2024 Star of Life Ambulance Program. The scope of work includes integrating LED warning lights, sirens, and power inverters into vehicle electrical systems, ensuring all installations comply with Department of Transportation and Federal Vehicle Standards. The contractor is responsible for delivering either fully installed systems or standalone emergency lighting and electrical kits. The opportunity is categorized under NAICS code 334413 and was posted on May 26, 2026, with a response deadline of December 31, 2026. This project is managed by the General Services Administration to support the specialized electrical and lighting needs of emergency medical vehicles.

Semiconductor and Related Device Manufacturing

POSTED

DEADLINE

Medical Equipment & Interior Component SupplierThis subcontract through the GSA/FAS Automotive Center involves the supply of specialized medical hardware and interior components for prime contractors working on GSA 2024 Star of Life Ambulance Program projects. The scope of work includes the manufacture of medical-grade cabinetry, oxygen systems, suction units, and mounting brackets, utilizing stainless steel and medical-grade plastics to ensure compliance with safety standards listed on GSAFleet.gov. The supplier is responsible for delivering either individual medical components or fully integrated interior modules under NAICS code 339113. The opportunity was posted on May 26, 2026, with a response deadline set for December 31, 2026.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

Ambulance Body Upfitter/ConverterThis subcontract with the General Services Administration's FAS Automotive Center involves the conversion of chassis into fully functional ambulances for prime contractors under the GSA 2024 Star of Life Ambulance Program. The scope of work includes the installation of patient compartments, medical cabinetry, lighting, and electrical systems, all of which must adhere to Federal Standards and Star of Life specifications. The contractor will utilize aluminum or composite modules and medical-grade finishes to deliver completed, road-ready vehicles. This opportunity falls under NAICS code 336212 and has a response deadline of December 31, 2026.

Truck Trailer Manufacturing

POSTED

DEADLINE

Ambulance Chassis ProviderThis subcontract opportunity with the General Services Administration's FAS Automotive Center involves the supply of base vehicle chassis for prime contractors working on the 2024 Star of Life Ambulance Program. The provider is responsible for delivering commercially available cutaway or van chassis that strictly adhere to Federal Vehicle Standards and NHTSA/DOT regulations as outlined in the GSA purchase descriptions. The selected provider will deliver these compliant chassis directly to the designated ambulance upfitter or converter. This requirement falls under NAICS code 336112, with a response deadline set for December 31, 2026.

Light Truck and Utility Vehicle Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS