Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Tempered Safety Glass Fabrication and Supply

Active

Federal

Response Deadline08/21/2026, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the fabrication and supply of 1/4 inch clear tempered safety glass for use in doors and sidelights, with all materials must comply with either ANSI Z97.1 or CPSC 16 CFR 1201 safety standards and be manufactured precisely to the project's specified dimensions. The work is part of a subcontract under a Small Business Set Aside designation, exclusively available to small businesses, and is classified under NAICS code 327215 which pertains to other glass product manufacturing. The opportunity was posted on August 5, 2026, with a response deadline of August 21, 2026, at 2:00 PM, and the performance location is established in Portsmouth with a zip code of 23703. The contracting agency is the Department of Homeland Security, operating under the Base PORTSMOUTH(00027) office, and the work is intended to support federal facility requirements in that location.

General Info

Fabricate and supply 1/4 inch clear tempered safety glass to federal standards for Portsmouth, VA facility.

Agency

Department Of Homeland Security → Base PORTSMOUTH(00027)View Agency

NAICS

327215 - Glass Product Manufacturing Made of Purchased GlassView NAICS

Place of Performance

Portsmouth, VA, 23703, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 5

subcontract

Response DeadlineAug 21

Submission deadline

Response Deadline

08/21/2026, 02:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Homeland Security → Base PORTSMOUTH(00027)

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Homeland Security → Base PORTSMOUTH(00027)

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Fabricate and supply 1/4” clear tempered safety glass for both doors and sidelights, meeting ANSI Z97.1 or CPSC 16 CFR 1201 safety standards and project dimensions.

Similar Contracts

Same NAICS industry code

Shatter-Proof Tinted Window Supply and InstallationThe contract requires the supply and installation of shatter-proof, UV-protective tinted sliding windows with at least 90 percent UV filtration, designed to reduce glare through optimal angling and positioned on at least three sides of a tower to ensure 180-degree visibility. The windows must meet stringent safety and performance standards, combining durability with environmental protection to enhance occupant comfort and long-term structural integrity. Installation must be completed as part of an integrated system, ensuring seamless operation and alignment with existing architectural elements. This subcontract, issued by the County of Maui in Hawaii under NAICS code 327215, is open for responses until September 11, 2026, with no set-aside provisions specified. The project is tied to a specific facility requiring precise window placement and technical adherence to performance metrics, though exact location details are not provided. All vendors must deliver and install products that satisfy the specified material properties and visual coverage requirements without reliance on external documentation or referenced specifications.

POSTED

DEADLINE

in about 1 month

56--CCAO Pavilion Insulated Glass

Solicitation # 140R2026Q0091

The Bureau of Reclamation’s Central California Area Office is soliciting quotes for the fabrication and delivery of eight insulated glass units to be installed in a 24-foot by 50-foot timber pavilion at Folsom Dam, California. This solicitation, numbered 140R2026Q0091, is issued as a combined synopsis and solicitation under FAR Part 12, treating the requirement as a commercial product acquisition. Each glass unit must be constructed with ¼-inch fully tempered Low-E 355 glass over ¼-inch clear glass, resulting in a total thickness of one inch, and must be fabricated to field-verified dimensions with a ½-inch clearance on all sides to accommodate structural movement. Quotes are due by 10:00 a.m. Pacific Time on August 5, 2026, and must be submitted exclusively via email to margaret_jones@ios.doi.gov in accordance with the 52.212-1 Addendum instructions. Delivery is required FOB destination to 7794 Folsom Dam Road, Folsom, CA 95630, within 30 days after receipt of order, and the contract will be awarded on a firm-fixed-price basis. The evaluation will be based on a trade-off approach, weighing technical capability, past performance, and price without predefined numerical weights. Technical evaluation will focus on the vendor’s ability to meet dimensional and material specifications, adhere to the delivery schedule, and present a feasible approach. Past performance will be assessed using multiple sources, including CPARS, FPDS-NG, and vendor-provided examples. Price reasonableness will be analyzed under FAR Part 12 techniques, with scrutiny for unbalanced pricing. Contractual clauses include deviations from standard FAR provisions concerning whistleblower rights, confidentiality agreements, system for award management maintenance, procurement integrity, and prohibitions related to inverted corporations, child labor, equal opportunity for workers with disabilities, and trafficking in persons, all marked as RFO deviations. Invoicing must be done electronically through the Invoice Processing Platform (IPP), and vendors must provide their SAM UEI and CAGE codes. Although no specific packaging, marking, or labeling requirements are stated, the contract mandates compliance with all specifications and acceptance at the delivery location by an authorized government representative. No options, clauses for extensions, or security clearance requirements are included.

Mp-Regional Office

POSTED

DEADLINE

Laminated Vehicular Glass ManufacturingThe contract entails the fabrication of 27 units of laminated glass windows specifically designed for military vehicles, with strict adherence to MIL-PRF, ASTM, and DLA standards to ensure exceptional durability, operational safety, and optical clarity under extreme conditions. Each unit must meet rigorous performance criteria to withstand ballistic threats, environmental stressors, and vibration commonly encountered in military operations, ensuring crew protection and mission readiness. The work falls under NAICS code 327215, indicating specialized manufacturing of glass products, and is structured as a subcontract within the Department of Defense’s Strategic Acquisition Program Directorate. Responses are due by August 20, 2026, with the solicitation posted on August 5, 2026, allowing potential subcontractors a 15-day window to prepare and submit proposals. The place of performance and exact delivery location are unspecified, implying flexibility in manufacturing site selection as long as compliance and delivery timelines are met. There is no set-aside designation, making the opportunity open to all qualified vendors regardless of size or ownership status. Technical submissions must demonstrate full compliance with the referenced military and industry standards, and failure to meet any requirement may result in disqualification or contract termination. Contractors must ensure all documentation, testing procedures, and final products align with DLA’s quality assurance protocols to satisfy procurement obligations.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Precision Glass Fabrication for Observation WindowsThe contract pertains to the manufacture of a military-grade observation window identified by NSN 9340-00-688-8143 and part number 9M100-1, fully compliant with Department of Defense technical specifications governing optical clarity, precise dimensional tolerances, and rigorous durability testing. The product must meet stringent military standards for performance under extreme conditions, ensuring reliability in defense and reconnaissance applications. The work is to be performed at a facility in Jacksonville, Florida, with a zip code of 32212-0103, and is classified as a subcontract under NAICS code 327215, which relates to glass product manufacturing. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, with no set-aside provisions specified. The contracting activity is under the Jacksonville BLDG office within the Department of Defense, and all deliverables must align with the technical and quality requirements outlined in the DLA guidelines to ensure interoperability and field readiness.

JACKSONVILLE BLDG

POSTED

DEADLINE

WINDOW, OBSERVATION

Solicitation # SPE8E5-26-T-3794

The contract is for the procurement of 12 observation windows under NSN 9340012805367 with a total value of $144.00, awarded under a Total Small Business Set-Aside as a simplified acquisition through the DLA Internet Bid Board System. Delivery is required within 167 days of order receipt, with an original delivery deadline of March 24, 2027 and a need ship date of February 1, 2027, to be shipped FOB origin to DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581. All items must be packaged in strict compliance with MIL-STD-2073-1E, using clean/dry preservation methods, greaseproof paper wrapping, and fiberboard cushioning, with packaging code U and unit container D3; plastics for wrapping, cushioning, or dunnage must be avoided unless contractually permitted. Palletization must adhere to DLA Packaging Requirements RP001, and markings must follow MIL-STD-129 including the special "Fragile" designation and 2D Data Matrix bar codes. Hazardous material handling is tightly controlled: mercury and mercury-containing compounds are prohibited except for specific functional uses in batteries, instruments, or weapon systems as defined by NAVSEA 5100-003D, which also require shock-proof design and secondary containment. Compliance with DFARS 252.223-7001, 252.223-7006, and 252.223-3 mandates correct labeling of hazardous substances, submission of Safety Data Sheets, and avoidance of hazardous storage or disposal. Cybersecurity requirements under DFARS 252.204-7012 and 252.204-7008 require implementation of NIST SP 800-171 safeguards for all systems handling covered defense information, with mandatory cyber incident reporting within 72 hours and flow-down obligations to subcontractors. The use of telecommunications equipment from Chinese military companies is prohibited under 252.204-7018. Offers must be submitted electronically through DIBBS by August 17, 2026, and include valid UEI and CAGE

POSTED

DEADLINE

Solicitation # SPE8E5-26-T-3813

Glass tubing with NSN 9340-01-284-3921 and part number EEP 501 is being procured under contract SPE8E5-26-T-3813 for delivery to Tracy CA, with a required delivery date of November 18, 2026 and a 167-day lead time. The order quantity is six units, each priced at $6.00, with no variance allowed in quantity. The product must be packaged and marked in strict compliance with MIL-STD-2073-1E and MIL-STD-129, including the special marking “Glass do not drop.” Packaging must follow DLA requirements that prioritize avoiding plastic for wrapping, cushioning, or dunnage whenever possible. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the tubing, except for specific functional uses such as batteries, fluorescent lamps, sensors, or chemical reagents specified by NAVSEA; any portable fluorescent lamps or instruments containing mercury must be shockproof and have a secondary containment. The product will be delivered FOB origin and inspected and accepted at destination. Shipping and transportation instructions align with DLAD Proc Notes C19 and C20, and the item is subject to DLA’s master list of technical and quality requirements identified by R or I numbers. The contract is managed by DLA District San Joaquin, with Nafis Beyah as the point of contact.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Solicitation # SPE8E5-26-T-3862

Glass tubing, round, colorless, annealed, 24 inches in length with an outer diameter of 0.75 inches and a wall thickness of 0.109 inches, is being procured under contract SPE8E5-26-T-3862 with a total quantity of 34 units. The item is designated as a critical application item and must comply with strict technical and quality standards outlined in the Technical Data Package, including adherence to DD-G-511E and QAP-13873 specifications. All supplies must meet DLA packaging requirements, including MIL-STD-2073-1E and MIL-STD-129 marking standards, with special labeling indicating “Glass do not drop.” Packaging must avoid plastic wrapping or cushioning whenever possible, and palletization must follow RP001 guidelines. The tubing must not contain or come into direct contact with mercury or mercury compounds except in specified exceptions such as functional batteries or instruments regulated by NAVSEA, and portable devices containing mercury must include a secondary containment. Quality compliance is enforced through required Certificate of Quality Compliance documentation and Contract Data Requirements Lists, with revisions governed by the DLA Master List of Technical and Quality Requirements in effect on the solicitation or award date. Delivery is required FOB origin within 83 days of contract award, to be delivered to DLA Distribution San Joaquin in Tracy, California. The contract specifies a fixed unit price of $34.00 per unit, with no variance allowed in quantity, and requires inspection and acceptance at destination.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

WINDOW, OBSERVATION

Solicitation # SPE8E9-26-T-3324

This contract, identified by solicitation number SPE8E9-26-T-3324, is for the procurement of two observation windows under NSN 9340-01-128-2785 and part number 295047CA5, supplied by ARGO TURBOSERVE CORPORATION and CURTISS-WRIGHT ELECTRO-MECHANICAL CORP. The unit price of $2.000 per item appears to be a formatting error, as the total contract value of $4.00 is implausible for military-grade observation windows, suggesting the intended price may be $2,000 per unit. Delivery is required within 167 days of award, with an original delivery date of April 22, 2027, and a need ship date of February 1, 2027. Items must be shipped FOB origin, with delivery directed to the DLA Distribution facility in New Cumberland, Pennsylvania. All supplies must comply with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including the special fragile designation, and must be palletized per DLA Packaging Requirements (RP001). Bare item marking per RQ017 is required, and no mercury or mercury-containing compounds may be intentionally added to the hardware, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and chemical reagents specified by NAVSEA; portable items containing mercury must have shock-proof construction and a secondary containment. The contractor must adhere to stringent cybersecurity compliance under 252.204-7012 and 252.240-7997, aligning with NIST SP 800-171, and safeguard covered defense information. All invoice submissions and receiving reports must be processed electronically via Wide Area WorkFlow (WAWF). Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions tied to the solicitation issue date or amendment. Hazardous materials labeling must follow OSHA’s Hazard Communication Standard, and all packaging must be preserved using cleaning and drying methods with damp-proof wrapping and burlap cushioning. Inspection and acceptance occur at the destination, with the government responsible for final evaluation. Contract clauses include equal opportunity for workers with disabilities, prohibition on unauthorized obligations, simplified acquisition

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

WINDOW, OBSERVATION

Solicitation # SPE8E5-26-T-3875

The contract pertains to the procurement of an observation window designated by NSN 9340-00-688-8143 and part number 9M100-1, meeting technical and quality specifications outlined in the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. The item is classified as a critical application item with potential exposure to covered defense information, requiring strict compliance with DLA packaging directives including MIL-STD-129 for marking and labeling, and RP001 for packaging requirements. The contract mandates delivery of 38 units, each priced at $38.00, with a total value of $1,444.00 under CLIN 0001, to be shipped FOB origin within 42 days of contract award, with a required delivery date of December 15, 2026, and a need ship date of September 29, 2026. No quantity variance is permitted, and inspection and acceptance occur at the destination. Packaging must adhere to DLA standards exclusively, with palletization following RP001, and all units must be labeled with the correct Unit of Issue and Quantity per Unit Pack. The delivery destination is DLA Distribution Jacksonville at Bldg 175, Swan Road, Jacksonville, FL 32212-0103, with transportation protocols governed by DLAD Proc Notes C19 and C20. The solicitation number SPE8E5-26-T-3875 was issued on August 5, 2026, with a response deadline of August 17, 2026, under NAICS code 327215, and is managed by the Department of Defense through the Jacksonville facility, with Willis Turner as the primary point of contact.

JACKSONVILLE BLDG

POSTED

DEADLINE

Manufacture of Transparent Vehicular Armor (Ballistic Glass)

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Supply of Plate Glass (NSN: 5620004721232, P/N: UH8888)The contract involves the procurement and delivery of two units of plate glass identified by NSN 5620004721232 and manufacturer part number UH8888, with strict adherence to technical specifications, packaging requirements, and marking standards. The materials must meet all defined quality and compliance benchmarks to ensure suitability for defense-related applications. The solicitation is issued as a subcontract under NAICS code 327215 by the Defense Logistics Agency, a component of the Department of Defense, and the performance location is designated as FPO, ZIP 09576. Responses must be submitted by the deadline of August 17, 2026, with the request for quotation posted on August 4, 2026, and further details accessible through the official DIBBS platform.

Defense Logistics Agency

POSTED

DEADLINE

Automotive Glass & SuppliesThe contract seeks the supply of automotive glass, including windshields and door glass, for vehicles within the state fleet operated by Mississippi. Scheduled for a response deadline on September 18, 2026, the opportunity is structured as a subcontract under NAICS code 327215, which pertains to glass product manufacturing for automotive use. The solicitation is posted by the Statewide agency, indicating a broad application across state-operated vehicle systems, though specific locations for performance are not detailed. Interested parties must submit proposals prior to the deadline to qualify for consideration, with no set-asides designated for small or specialized businesses. The contract aims to standardize and secure a reliable source of automotive glass replacements to support the maintenance and operational readiness of state fleet vehicles.

POSTED

DEADLINE

in about 1 month

More opportunities from Department Of Homeland Security → Base PORTSMOUTH(00027)

Same awarding agency

Hardware Supply (Push-Pull, Dead Latch, Surface Closers)The contract outlines the supply of commercial-grade, corrosion-resistant hardware Components including push-pull bars, dead latches, and surface-mounted door closers specifically for storefront door systems. All items must meet stringent durability and environmental resilience standards to ensure long-term performance in high-traffic municipal or federal facilities. The work is designated as a Small Business Set Aside under NAICS code 332215, which relates to architectural and structural metals manufacturing, and is restricted to eligible small businesses competing for the award. The solicitation was posted on August 5, 2026, with a firm response deadline of August 21, 2026, at 2:00 PM. Performance is required at the Portsmouth location with a zip code of 23703, under the oversight of the Department of Homeland Security, Base PORTSMOUTH(00027). The nature of the contract is a subcontract, indicating that the selected vendor will deliver components as part of a larger installation or systems integration effort.

Metal Kitchen Cookware, Utensil, Cutlery, and Flatware (except Precious) Manufacturing

POSTED

DEADLINE

Supply of Storefront Doors, Sidelights, and HardwareThe contract requires the supply of one pair of black storefront doors complete with frame, two sidelights, and all necessary hardware for installation at a government facility in Portsmouth, Virginia. All materials must comply with federal specifications mandated for use in federal buildings, ensuring durability, security, and adherence to government standards. The scope includes full delivery, installation readiness, and inclusion of all components needed to meet operational and regulatory requirements. This is a Small Business Set Aside contract under NAICS code 332312, reserved exclusively for small businesses, with responses due by August 21, 2026. The contracting office is the Department of Homeland Security, base Portsmouth, and performance must occur at the designated location with zip code 23703. Bidders must be prepared to meet strict compliance standards, and the opportunity is accessible via the SAM.gov portal under the provided link.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Removal and Disposal of Existing Doors and FramesThe contract involves the complete removal, demolition, and proper disposal of existing storefront doors and frames, along with full site cleanup and debris hauling to ensure the area is left safe and orderly. All work must comply with environmental and safety regulations for handling construction waste, with emphasis on responsible disposal methods. The project is classified as a subcontract under a Small Business Set Aside, meaning only qualified small businesses are eligible to bid, and it falls under the NAICS code 238990 for other specialized construction activities. The opportunity was posted on August 5, 2026, with responses due by August 21, 2026, at 2:00 PM. Performance is required in Portsmouth, Virginia, with a zip code of 23703, under the oversight of the Department of Homeland Security through its Portsmouth facility.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Storefront Door and Frame InstallationThe contract involves the complete installation of one pair of 3'0" x 6'8" black storefront doors, encompassing the door frames, sidelights, hardware, and surface closers, with all work performed on-site to ensure proper assembly, alignment, and precision fitting. The scope requires meticulous attention to detail during installation to guarantee seamless integration and operational functionality of the entire door system. All components must be delivered and installed in accordance with industry standards and manufacturer specifications to meet performance and safety requirements. This is a Small Business Set Aside subcontract under NAICS code 238350, issued by the Department of Homeland Security through its Portsmouth office, with performance taking place in Portsmouth, Virginia, 23703. The solicitation was posted on August 5, 2026, and responses are due by August 21, 2026, at 2:00 PM. Only small businesses eligible under SBA guidelines may submit proposals, and the work must be completed in full compliance with federal procurement regulations applicable to this type of contracting action.

Finish Carpentry Contractors

POSTED

DEADLINE

USCG Base Portsmouth Command Door Replacement

Solicitation # 70Z02726RFQ000153

The contract requires the complete removal and disposal of existing doors and frames, followed by the installation of one pair of 3’0” x 6’8” black storefront doors with frame and two matching sidelights, all featuring medium 10-inch bottom rails, standard push-pull hardware with dead latches, surface closers, and 1/4-inch clear tempered safety glass. The sidelights must use the same glass specification as the doors. This procurement is a total small business set-aside under NAICS code 238350 for Finish Carpentry Contractors, with the small business size standard capped at $19.0 million. The Government intends to award a Firm-Fixed Price contract, and all submissions must follow the guidelines in FAR 52.212-1 and FAR 52.212-2, including proper completion of blocks 14 through 20c of the SF1442 form with UEI included. Quotes must be emailed by 10:00 AM Eastern Time on August 21, 2026, to the designated points of contact. Interested vendors are strongly urged to conduct a site visit to verify quantities and conditions prior to submitting a quote, with an official site visit scheduled for August 17, 2026, at 10:00 AM Eastern Time. Access to the site requires advanced scheduling with Jamie Bridges and Nate Chappell, and all visitors must provide their full name, date of birth, and REAL ID Driver’s License number. Questions regarding the solicitation must be submitted in writing to the Contracting Officer no later than August 18, 2026, at 10:00 AM Eastern Time. The contract is issued by the Department of Homeland Security through Base Portsmouth, Virginia, with the place of performance located at 23703, and all submissions must adhere strictly to the outlined procedural and timing requirements.

Finish Carpentry Contractors

POSTED

DEADLINE

Labor Compliance and Payroll ReportingThe contract titled Labor Compliance and Payroll Reporting requires the contractor to maintain accurate payroll records and ensure full compliance with the Davis-Bacon Act and all applicable federal labor standards. This subcontract is designated as a Small Business Set Aside under the SBA, specifically reserved for total small business participation, and falls under the NAICS code 541611, indicating it relates to administrative management and general management consulting services. The contractor must submit timely and precise payroll documentation to demonstrate adherence to prevailing wage rates and labor requirements on federal projects, with performance obligated to take place in Cape Charles. The opportunity was posted on August 3, 2026, and responses are due by August 19, 2026, with the contracting agency identified as the Department of Homeland Security, under Base PORTSMOUTH 00027.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Environmental Compliance and Pollution PreventionThis contract, titled Environmental Compliance and Pollution Prevention, is a subcontract under a Small Business Set Aside designation, reserved exclusively for small businesses, and is associated with NAICS code 541620, which pertains to environmental consulting services. The opportunity was posted on August 3, 2026, with a response deadline of August 19, 2026, and is managed by the Department of Homeland Security through its Base PORTSMOUTH(00027) office. Performance of the work is required solely in Cape Charles, where the contractor must ensure full adherence to environmental regulations during repair activities, including comprehensive measures for spill prevention, proper waste disposal protocols, and effective pollution control practices. The contract emphasizes regulatory compliance as a critical component of service delivery, requiring the successful bidder to implement and maintain systems that mitigate environmental risks throughout all project phases, with no alternative locations permitted for execution.

Environmental Consulting Services

POSTED

DEADLINE

Pump and Mechanical Equipment SupplyThe contract is for the supply of new or certified refurbished pumps, motors, valves, and mechanical components required for the repair of a sewage lift station located in Cape Charles. It is classified as a subcontract under a Small Business Set Aside, meaning only eligible small businesses may bid, with the NAICS code 333911 indicating the industry focus on pump and pumping equipment manufacturing. The opportunity was posted on August 3, 2026, with a mandatory response deadline of August 19, 2026, at 4:00 PM. The procuring entity is the Department of Homeland Security, operating through the Base PORTSMOUTH(00027) office, though no specific point of contact or address details are provided. Performance of the work is tied to the identified location in Cape Charles, and all supplied equipment must meet certification standards to ensure reliability and compatibility with existing infrastructure.

Pump and Pumping Equipment Manufacturing

POSTED

DEADLINE

Electrical Systems Installation and IntegrationThe contract entails the installation and integration of electrical systems for a lift station, including control panels, sensors, alarms, and power systems, ensuring full operational functionality and compliance with technical specifications. This subcontract is designated as a Small Business Set Aside under NAICS code 238210, meaning only qualifying small businesses are eligible to respond, and the work must be performed at the Cape Charles location. The solicitation was posted on August 3, 2026, with a response deadline of August 19, 2026, at 4:00 PM, and the contracting authority is the Department of Homeland Security through the Base PORTSMOUTH(00027) office. All proposals must meet the required technical standards for electrical integration and demonstrate capability to complete the work in the specified location within the timeline.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Mechanical and Electrical Repairs for Sewage Lift StationThis contract involves the repair and replacement of pumps, motors, control panels, and related mechanical and electrical systems at a sewage lift station located in Cape Charles. The work is classified under NAICS code 238220, indicating it falls within the electrical and wiring installation services category, and is set aside exclusively for small businesses under the SBA’s Total Small Business Set Aside program. The solicitation was posted on August 3, 2026, with a response deadline of August 19, 2026, at 4:00 PM, providing interested parties with a sixteen-day window to submit proposals. The contracting agency is the Department of Homeland Security, operating under the Base PORTSMOUTH(00027) designation, and the performance location is specifically identified as Cape Charles. All work must be completed in accordance with the technical and safety requirements associated with critical wastewater infrastructure, and the successful contractor will be responsible for ensuring the reliable operation of the lift station’s essential systems following the repairs and replacements.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

USCG Station Cape Charles Sewage Lift Station Repairs

Solicitation # 70Z027Q260000080

The contract requires the contractor to supply all labor, supervision, equipment, and materials needed to repair and maintain the Sewage Lift Station at USCG Station Cape Charles, Virginia, under a Firm-Fixed Price arrangement. This procurement is 100% set aside for small businesses as defined by NAICS code 238220, with a size standard of $19.0 million in annual revenue, and quotes must be submitted via email to frank.r.burton@uscg.mil no later than noon Eastern Time on August 19, 2026. All submissions must include completed blocks 14 through 20c of the SF1442 form and the UEI, adhering to the instructions and evaluation criteria outlined in FAR 52.212-1 and FAR 52.212-2. Potential offerors are strongly encouraged to conduct a site visit on August 12, 2026, at 10:00 AM Eastern Time at 1 Marina Road, Cape Charles, VA 23310, and must coordinate access in advance with Matthew Bowman and Frank Burton. Questions regarding the solicitation must be submitted in writing by 3:00 PM Eastern Time on August 13, 2026. The solicitation number is 70Z027Q260000080, and it was posted on August 3, 2026, under the Department of Homeland Security, Portsmouth Office.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Testing, Inspection & Commissioning ServicesThe contract encompasses post-installation testing, inspection, and commissioning services for a repaired electrical system, ensuring that all components meet established safety benchmarks, proper grounding protocols, and adequate load capacity. The work must fully comply with the National Electrical Code and Occupational Safety and Health Administration standards to confirm operational integrity and regulatory adherence. This service is critical to validating that the electrical system is safe for use and functions as intended following any repairs or modifications. The contract is classified as a subcontract under NAICS code 541340 and is associated with the Department of Homeland Security through its Base PORTSMOUTH(00027) office. It was posted on July 8, 2026, with performance required at Alexandria, Virginia, in the 22315 zip code. Although no specific solicitation number or point of contact is provided, the work is positioned as a necessary verification step within a larger project, focused on maintaining compliance and safeguarding personnel and infrastructure through rigorous technical evaluation.

Drafting Services

POSTED

about 1 month ago

DEADLINE