Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Temporary Utility Services (Power, Water, Lighting)

Active

Federal

Response Deadline09/03/2026, 03:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract mandates the provision and management of temporary electrical power, potable water, and lighting services during dockside operations, with strict adherence to safety standards and shift-specific requirements for setup, operation, and removal. All services must be delivered reliably and efficiently to support operational needs at the designated performance location in Bellingham, ensuring compliance with industry best practices and regulatory guidelines for utility deployment in maritime environments. The work is classified as a subcontract under a Small Business Set Aside, specifically reserved for small businesses, and aligns with NAICS code 238220 for electrical and other construction utilities. The opportunity was posted on August 5, 2026, with a response deadline of September 3, 2026, and is managed by the SFLC Procurement Branch 1 within the Department of Homeland Security.

General Info

Temporary electrical, water, and lighting services for dockside operations in Bellingham under Small Business Set Aside.

Agency

Department Of Homeland Security → Sflc Procurement Branch 1(00080)View Agency

NAICS

238220 - Plumbing, Heating, and Air-Conditioning ContractorsView NAICS

Place of Performance

Bellingham, WA, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 5

subcontract

Response DeadlineSep 3

Submission deadline

Response Deadline

09/03/2026, 03:00:00 PM UTCin 28 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Homeland Security → Sflc Procurement Branch 1(00080)

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Homeland Security → Sflc Procurement Branch 1(00080)

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply and manage temporary electrical power, potable water, and lighting during dockside availability, ensuring safe setup, operation, and removal per shift requirements.

Similar Contracts

Same NAICS industry code

ESJC – FIRE EXTINGUISHER SERVICES

Solicitation # esjc-fire-extinguisher-services

This subcontracting opportunity seeks qualified small businesses to provide quarterly fire extinguisher inspection and servicing services at the Excelsior Springs Job Corps Center in Missouri, with a total of 175 extinguishers across campus buildings and center-owned vehicles requiring routine checks and replacement when needed. The contract is structured as a fee-for-service arrangement under a Request for Quotation, with bidders required to submit a completed Bid Sheet detailing cost breakdowns, proposed service schedules, Missouri-specific licensing and credentials, and all mandatory vendor documentation including Form W-9, Vendor Acknowledgement Form, FFATA Notice, and Anti-Lobbying Certification. The solicitation is reserved exclusively for small businesses under multiple SBA-designated set-asides including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone, Veteran-Owned, and Service-Disabled Veteran-Owned Small Business categories, with NAICS code 238220 applying. The contracting entity, Education & Training Resources (ETR), requires full compliance with federal regulations including FAR 52.209-6 (debarment certification), FAR 52.222-41 (Service Contract Act), FAR 52.203-11 (Anti-Lobbying Certification), and FAR 52.222-55 (minimum wages under EO 14026), and mandates that the winning bidder maintain an active SAM.gov registration with a Unique Entity ID. Performance begins October 1, 2026, and runs through September 31, 2027, with services scheduled four times annually and deliverables due F.O.B. destination. All work must adhere to the current National Electrical Code, NFPA 101 Life Safety Code, applicable OSHA standards, and state and local building regulations, and contractors must provide inspection tags for each extinguisher, supply full and charged replacements, and submit signed punch lists and warranties for payment. Payment terms stipulate payment within 30 days of invoice submission, and the award will be determined by the best overall value, not necessarily the lowest bid. Contractors must obtain appropriate bonding based on project value, carry commercial liability, automobile, workers’ compensation, and builders risk insurance, and strictly comply with center security rules prohibiting fraternization, tobacco, alcohol, drugs, and firearms on campus. A site visit is required prior to bid submission, all responses must be received by 12 PM CST on August 14, 20

ETR/Excelsior Springs Job Corps

POSTED

about 11 hours ago

DEADLINE

IE JCC HVAC Replacements

Solicitation # ie-jcc-hvac-replacements

This is a fixed-price, single lump sum subcontracting opportunity managed by Management & Training Corporation (MTC) on behalf of the U.S. Department of Labor for HVAC replacements at the Inland Empire Job Corps Center in San Bernardino, California. The scope of work includes furnishing and installing three new packaged HVAC units with gas heating at ground-level or rooftop locations, removing and properly disposing of existing units in compliance with EPA refrigerant recovery regulations, reconnecting and modifying existing gas piping and ductwork, installing new electrical disconnects and programmable thermostats, and conducting full startup, testing, and commissioning—including verification that the fresh air intake damper activates during fire events. All work must adhere to Title 24, the 2024 International Mechanical Code, the 2024 International Energy Conservation Code, and ASHRAE 90.1-2022. The contractor must provide manufacturer warranties, operation and maintenance manuals, disposal and recycling documentation, and complete closeout deliverables. The project must be completed within 100 consecutive business days after receiving a Notice to Proceed, following a mandatory onsite pre-construction meeting to finalize start and completion dates. The solicitation is set aside exclusively for small business concerns including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone businesses, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses, with NAICS code 238220. Offerors must hold a Unique Entity Identifier (UEI) and provide a Tax ID and DUNS number. Bids are due by August 7, 2026, at 3:00 p.m. PT and must be submitted via email to three designated contacts, along with a fully completed MTC Bid for Lump Sum Contract form, detailed cost breakout covering materials, labor with apprenticeship documentation, equipment specifications, and all associated fees. A physical site visit and signed attendance roster are mandatory. A bid bond of 20% is required if the bid is $25,000 or higher, and if awarded, performance and payment bonds equaling 100% of the contract value must be submitted. Contractors must maintain liability insurance of $1 million per occurrence and $3 million aggregate, auto insurance of $1 million, and workers' compensation of $500,000, with MTC and DOL named as additional insured. Weekly certified payroll reports, SF 1413 forms, compliance with prevailing wage

MTC Inland Empire Job Corps

POSTED

about 11 hours ago

DEADLINE

Boiler replacement in IOOF and Administration

Solicitation # boiler-replacement-ioof-administration

Serrato Corporation DBA Flint Hills Job Corps is seeking a licensed HVAC contractor to replace three boilers across two buildings at the Flint Hills Job Corps Center in Manhattan, Kansas—two boilers in Building 1 (IOOF) and one high-efficiency boiler in Building 2 (Administrative/Academic). The project requires removal of two existing Peerless gas-fired boilers and installation of new units delivering 1,680,000 B.T.U. input and 1,344,000 B.T.U. output for Building 1, and a 94% efficient Energy Star certified boiler with 600,000 B.T.U. input and 572,000 B.T.U. output for Building 2. All work must comply with the latest editions of IBC, IMC, IPC, NEC, NFPA-72, NFPA 101, and IECC, alongside federal regulations including EPA standards 40 CFR 761 and 40 CFR 61 Subpart M, and OSHA 29 CFR 1926. The contractor must secure all local permits, maintain current licensing, and adhere to strict site conduct rules including prohibitions on fraternization, alcohol, drugs, and firearms. A qualified commissioning agent must verify control system functionality, and all work is subject to the Davis-Bacon Act wage determination. The contract includes a ten-year warranty on boiler heat exchangers, two-year warranty on all other parts, plus a one-year workmanship warranty and a mandatory one-year preventive maintenance agreement. Contractors must submit detailed pricing with labor breakdowns, materials, and total costs, along with a W-9 and DUNS number. Substantial completion is expected within 60 days of Notice to Proceed, with full contract close-out within 90 days, and all tasks must conclude no later than 120 calendar days after NTP. The Center must be named as both Certificate Holder and Additional Insured on liability coverage. Proposals are due by August 13, 2026, and selection will be based solely on price and price-related factors, with material compliance serving as a mandatory pass/fail gate. Performance is to occur at 4620 Eureka Drive, Manhattan, KS, with work confined to weekdays from 8 a.m. to 5 p.m. and strict restrictions on use of Center facilities.

Serrato Corporation DBA Flint Hills Job Corps

POSTED

about 11 hours ago

DEADLINE

Keystone Lincoln Dorm Water Heater Repair

Solicitation # keystone-lincoln-dorm-water-heater-repair

The contract is for the repair of a hot water heater located in the Lincoln dormitory at the Keystone Job Corps Center in Drums, Pennsylvania. The equipment to be repaired is an AquaPlex Turbopower 96, Model #100L400A-TPX with serial number F008076, and the repair must include replacement of specific components: the blower motor assembly, gas valve, hot surface ignitor, ignitor gasket, and electrode flame rod. The work is subject to Davis Bacon wage requirements, and certified payroll documentation must be submitted to ensure compliance with federal labor standards. Offerors must be registered and active on Sam.gov and are required to submit bids with labor and materials costs clearly separated. The solicitation is set aside exclusively for small business concerns, including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business as defined by the SBA. The North American Industry Classification System code for this procurement is 238220, indicating it falls under plumbing, heating, and air-conditioning contracting. The place of performance is confirmed as Drums, Pennsylvania, but the period of performance, delivery schedule, and FOB terms are not specified. No pricing schedule, contract value estimate, or evaluation factors for award are provided, and there is no indication of whether the award will be based on lowest price technically acceptable or best value. All documentation referenced in the scope of work does not include attached exhibits, packaging requirements, inspection criteria, or detailed proposal submission instructions beyond the separation of labor and materials and Sam.gov registration. The solicitation was posted on August 6, 2026, with a response deadline of August 14, 2026, and the point of contact for inquiries is Jennie Drumheller at Adams & Associates Keystone Red Rock Job Corps.

Adams & Associates Keystone Red Rock Job Corps

POSTED

about 11 hours ago

DEADLINE

PCJCC HVAC Replacement Bldg Two

Solicitation # PCJCC-HVAC Replacement Bldg Two

This is a subcontracting opportunity issued by Exceed Corporation LLC, operating the Pinellas County Job Corps Center in St. Petersburg, Florida, for the replacement of two outdoor condenser units at Building Two. The scope requires a licensed HVAC contractor to remove and dispose of two existing condensing units—CU-2-1 (20 ton) and CU-2-2 (15 ton), including the full length of refrigerant line-sets—and recover R-22 refrigerant for recycling or offsite disposal in accordance with EPA and ASHRAE 15 guidelines. New commercial-grade split condensing units must be installed using non-ozone-depleting A2L refrigerants such as R-32 or R-454B, meeting Energy Star and Federal Energy Management Product (FEMP) standards. The work includes removing the DX cooling coil from the existing VAV Air Handling Unit (AHU-2-2), installing a new OEM DX cooling coil, supplying and installing new insulated refrigerant line-sets, filter dryers, refrigerant accumulators, sight glasses, and thermostatic expansion valves, as well as providing new NEMA 3R electrical disconnects, conduit, and wiring. The contractor must also verify or install duct-mounted smoke detectors in compliance with NEC, NFPA 90A, and NFPA 72. All work must adhere to the latest IMC, IPC, SMACNA, and NEC codes and manufacturer installation requirements. A mandatory site visit must be completed before submitting a bid, and all proposals must be submitted no later than 5:00 p.m. on August 7, 2026; late submissions will not be accepted. Proposals must include complete pricing for installation, removal, and all ancillary costs. The contractor is required to provide a minimum five-year warranty on compressors and a one-year warranty on parts and labor. The solicitation is open to small business concerns, including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business, as set aside under SBA regulations. All entities must be EEO compliant. The place of performance is 500 22nd Street South, St. Petersburg, FL 33712, and all communications and scheduling inquiries must be directed to Angelia Richardson, Finance & Administration Director, at 727-551-299

Exceed, LLC dba Pinellas County Job Corps Center

POSTED

about 11 hours ago

DEADLINE

2026-Maui-Dorm Exhaust Fans

Solicitation # 2026-maui-dorm-exhaust-fans

This subcontracting opportunity with Management and Training Corporation (MTC) for the Hawaii Job Corps Center on Maui involves the removal and replacement of approximately 25 exhaust fans across three dormitories, with full scope including safe removal and disposal of existing units, installation of approved new fans, restoration of damaged drywall and plaster to match existing finishes, and comprehensive site cleanup. All work must comply with local regulations and professional standards, and the contractor is responsible for obtaining necessary permits, adhering to MTC’s strict shipping and packaging guidelines, and providing two complete operation and maintenance manuals with product data, parts lists, and maintenance requirements. A minimum of two hours of on-site training for facility personnel is mandatory, and all work must be inspected and accepted by MTC’s Maintenance Supervisor or designee, including a formal punch list process prior to final acceptance. The contract type is a fixed-price, single lump sum, with performance occurring at 500 Ike Drive, Makawao, HI 96768, and work must commence within five business days of the agreed-upon start date confirmed during a mandatory pre-construction meeting. The solicitation is exclusively reserved for small business set-asides including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone, Veteran-Owned, and Service-Disabled Veteran-Owned Small Business, with NAICS code 238220 applying. Bidders must submit a detailed cost breakout on company letterhead covering materials, labor with categories and rates, equipment, associated fees, bonds, subcontractor costs, overhead, profit, and other direct or indirect costs. A signed MTC bid form, completed Supplier Packet including W-9, proof of insurance, three references for comparable projects, and mandatory site visit documentation are required. If the bid exceeds $25,000, a 20% bid bond and 100% performance and payment bonds from an A-rated surety are required, along with general liability coverage of $1 million per occurrence and $3 million aggregate, auto liability of $1 million, workers’ compensation of $500,000, and professional liability of $1 million per occurrence and $3 million aggregate. Contractors must comply with federal wage requirements under Executive Order 13658, submit weekly certified payrolls, post required labor notices, and adhere to DOL data protection protocols including reporting privacy breaches within one hour. All offerors must provide a unique entity identifier (UEI), DUNS number, and

Management & Training Corporation

POSTED

about 11 hours ago

DEADLINE

HVAC Units Replacement in 3 dormitories

Solicitation # 26-134

The solicitation requires the replacement of twenty HVAC units across three dormitory buildings at the Atterbury Job Corps Center in Edinburgh, Indiana, with all work performed under a single lump sum contract. The project involves replacing nine packaged gas-fired HVAC units at 1095 MLK, nine at 1094 RFK, and two condensing units at 1963 LBJ, all of which have failed due to excessive wear, environmental damage, or mechanical issues. New units must be 12.5 SEER packaged units using non-R22 refrigerants such as R-410A or R-454B, and contractors are required to reuse existing electrical disconnects, ductwork, and thermostat wiring. All removed equipment from 1094 and 1095 must be left at the maintenance building for disassembly and parts recovery, and any recovered refrigerant must be properly labeled and turned over to site maintenance. Compliance with EPA and OSHA standards is mandatory, as is conformity with state and local building codes. The work must be completed within a timeline submitted with the bid, beginning no later than fourteen days after receipt of the Notice to Proceed, with all punch list items resolved within fourteen days of substantial completion. A one-year workmanship guarantee is required, and contractors must provide training, operating manuals, and keys prior to acceptance. Only vendors who attend the mandatory bid conference are eligible to submit proposals, which must be submitted by August 7, 2026, at 3:00 PM via email to Tammy Swallows at Purchasing.Atterbury@adamsaai.com. Proposals must be typed on official company letterhead and include a detailed cost breakdown of labor, materials, equipment, and incidental expenses, along with the total lump sum price. Required documentation includes a completed SF-1413, W-9, SAM.gov Wage Determinations printout, Vendor Questionnaire with DUNS#, Small Business Certification if applicable, copies of all insurance certificates, state of Indiana contractor license, and proof of a 90-day bid guarantee. Insurance requirements include $1 million general liability, $200,000 per person/$500,000 per occurrence automobile liability with Adams & Associates as additional insured, and workers’ compensation meeting state statutory limits. Contractors must comply with Davis-Bacon wage determinations, display the DOL WH-1313 poster, and adhere to strict security and conduct rules

Adams & Associates, Inc.

POSTED

about 11 hours ago

DEADLINE

RFQ#3857 Freezer Door Replacement

Solicitation # RFQ#3857

This subcontracting opportunity with Management & Training Corporation (MTC) for the Charleston Job Corps Center in Charleston, West Virginia, seeks a qualified contractor to replace three walk-in refrigeration doors—one cooler and two freezers—through a fee-for-service arrangement. The scope requires full labor, materials, equipment, transportation, supervision, and incidental services to remove and dispose of the existing doors, install new units with all necessary hardware including hinges, latches, gaskets, closers, and thresholds, and ensure proper operation through testing and alignment to maintain an airtight seal. The work must comply with OSHA safety standards, applicable refrigeration and building codes, and all DOL-mandated requirements including privacy breach notification within one hour of discovery, mandatory training, and records management. The contractor must adhere to strict shipping instructions from MTC, properly package materials under commercial standards, and forward signed bills of lading when using third-party carriers. The solicitation, issued under RFQ#3857, is set aside for small business categories including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone, Veteran-Owned, and Service-Disabled Veteran-Owned Small Business, with NAICS code 238220 applying a $19 million size standard. Bidders must self-certify their socioeconomic status and provide a W-9, Unique Entity Identifier, DUNS number, and tax ID. First-tier subcontractors exceeding $30,000 must disclose debarment or suspension status per FAR 52.209-6, and all parties must comply with the Service Contract Labor Standards wage determination WD#2015-4347 (Rev 29). Insurance requirements include $1 million general liability per occurrence and $3 million aggregate, $1 million auto coverage, and $500,000 workers’ compensation, with MTC, DOL, and Charleston Job Corps named as additional insured and certificate holders. Invoicing must occur weekly or bi-weekly with detailed line items, purchase order numbers, and pricing breakdowns, and payment terms are to be specified by the bidder. Proposals must be submitted via email to Wendy Lawrence no later than 3:00 PM EST on August 17, 2026, and must include a bid sheet, supplier packet, three references for similar projects, and proof of insurance. Award will be based solely on best value as determined by MTC, with final acceptance contingent

Management & Training Corporation

POSTED

about 11 hours ago

DEADLINE

HVAC Units Replacement in Culinary Arts

Solicitation # 26-133

Only vendors who attend the mandatory bid conference will have their proposals considered for the replacement of a pad-mounted packaged gas-fired HVAC unit at the Atterbury Job Corps Center in Edinburgh, Indiana. The existing unit, a Bryant model 580JP08D180G2A0AAA with a 7.5-ton cooling capacity and R-410A refrigerant, installed in March 2010 and compromised by a failed heat exchanger, must be replaced with a new 12.5 SEER packaged unit using modern refrigerants such as R-410A or R-454B. The new unit must integrate with existing electrical disconnects, ductwork, and thermostat wiring, and all work must comply with state and local codes, the national building code, and Indiana regulations where more stringent than federal standards. The contractor is required to adhere to EPA and OSHA regulations, post the Department of Labor’s WH 1313 notice, and ensure employees are informed of applicable minimum wage determinations under the Davis-Bacon Act. Bid proposals must be submitted as a single lump sum covering all labor, materials, equipment, and incidental costs, accompanied by a detailed cost breakdown on official company letterhead, including Scope of Work ID 26-133, project description, requirements, and total cost. Proposals must also include a completed vendor questionnaire with DUNS number, W9 form, proof of Indiana contractor’s license, copies of insurance certificates naming Adams & Associates, Inc. and the Atterbury Job Corps Center as additional insureds, Small Business Certification if applicable, a timeline for substantial completion, references, material safety data sheets, and a list of reused components. A minimum 90-day bid guarantee is mandatory, and insurance must include $200,000 per person / $500,000 per occurrence automobile liability, $1,000,000 per occurrence general liability, and workers’ compensation meeting Indiana statutory limits. The work must commence within 14 days of the Notice to Proceed and be fully completed, including punch list corrections within 14 days of substantial completion, with all workmanship guaranteed for one year. Substantial completion requires written notice seven days in advance and a walk-through by the Contracting Officer or designee; final acceptance requires submission of consent of surety, lien releases, certified payroll records, SF 1413 form, and subcontractor release of claims. Payment

Adams & Associates, Inc.

POSTED

about 11 hours ago

DEADLINE

Plumbing and Gas Line Repair

Solicitation # plumbing-gas-line-repair

The contract titled Plumbing and Gas Line Repair is a fixed-price, single lump sum solicitation issued by Management & Training Corporation on behalf of the U.S. Department of Labor for work at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope requires correction of plumbing and gas system deficiencies to comply with the International Plumbing Code and fuel gas safety standards, including specific repairs to gas lines at Building 305, installation of backflow preventers at Buildings 607 and 701, and relocation of water piping away from electrical panels in Building 610. The contractor must supply all labor, materials, equipment, supervision, and incidentals, perform pressure and leak testing, restore affected areas, and deliver two complete operation and maintenance manuals with manufacturer warranties and guarantees. A minimum of two hours of on-site training for facility personnel is mandatory. Work must be completed within 60 consecutive business days after receiving a written Notice to Proceed, with a required pre-construction meeting and commencement within five business days of the agreed start date. The contract value is estimated between $0 and $25,000, with bid bonding and performance/payment bonds required if the bid equals or exceeds $25,000, and insurance requirements include $1 million general liability per occurrence, $1 million auto coverage, and $500,000 worker’s compensation. All offerors must be registered with a Unique Entity Identifier and provide a nine-digit tax ID and DUNS number. The procurement is set aside for small businesses including small disadvantaged, women-owned, veteran-owned, HUBZone, and service-disabled veteran-owned small businesses, requiring mandatory self-certification under FAR 52.219-8. First-tier subcontractors with awards over $30,000 must disclose any debarment status under FAR 52.209-6, while all contractors and subcontractors performing construction work must submit a fully executed SF 1413 form to certify compliance with construction wage payment requirements. Certified weekly payroll records are mandatory, and prevailing wage obligations under Executive Order 13658 must be met. Contractors must provide three comparable project references, submit bids via email by August 10, 2026, using the MTC bid form signed by an authorized official, and include a detailed cost breakdown on company letterhead covering materials, labor, equipment, permits, overhead, profit, and subcontractor costs. Safety protocols require submission

Earle C. Clements Job Corps Center

POSTED

about 11 hours ago

DEADLINE

HVAC Units Replacement @ Facility Engineering Building

Solicitation # 26-132

The solicitation is for the replacement of an existing furnace with a bad heat exchanger and rust damage at the Atterbury Job Corps Center in Edinburgh, Indiana, requiring the installation of a new 12.5 SEER condensing unit using modern refrigerants such as R-410A or R-454B, along with an air conditioner, AC disconnect, wiring, and a dedicated breaker. All work must comply with applicable state and local codes, including Indiana regulations which take precedence over federal standards when more stringent, as well as current EPA and OSHA requirements. Installation must include provision of operating and maintenance manuals, training, and keys, and the contractor must complete a substantial completion walk-through confirmed by the center’s representative. The project is a single lump sum contract requiring a detailed cost breakdown for labor, materials, equipment, and all incidental expenses, with payment terms of Net 30. Only vendors who attend the mandatory pre-bid conference and site visit on July 28th, 2026, are eligible to submit bids, and proposals must be submitted by August 7th, 2026, at 3:00 PM via email to Tammy Swallows at Purchasing.atterbury@adamsaai.com on official company letterhead. The contract is set aside for small businesses, including Small Disadvantaged, Women-Owned, HUBZone, Veteran-Owned, and Service-Disabled Veteran-Owned Small Businesses, with required certifications including Small Business Status, W9, Vendor Questionnaire with DUNS#, and Davis-Bacon Act wage rate compliance. Bidders must provide proof of licensing in Indiana, insurance coverage including $1,000,000 general liability, $200,000/$500,000 auto liability, and state-mandated workers’ compensation, with Adams & Associates, Inc. and Atterbury Job Corps Center named as additional insureds. A 90-day bid guarantee is required, and the award will be based on best value, weighing price at 60%, quality at 20%, past performance at 10%, and schedule at 10%, with the lowest price not guaranteeing award. Contractors must adhere to strict site conduct rules including no fraternization with staff or students, no transport or consumption of alcohol or drugs, and no firearms on site. Final payment requires submission of consent of surety, release of liens, certified payroll records, SF-1

Adams & Associates, Inc.

POSTED

about 11 hours ago

DEADLINE

Plumbing and Piping Systems Installation

POSTED

about 16 hours ago

DEADLINE

More opportunities from Department Of Homeland Security → Sflc Procurement Branch 1(00080)

Same awarding agency

Coating and Paint Material SupplyThe contract requires the supply of marine-grade coatings and paints that strictly adhere to SFLC Standard Specification 6310, Appendix C, ensuring all materials meet defined performance and quality standards for harsh maritime environments. All products must be stored under controlled temperature conditions between 65 and 85 degrees Fahrenheit to preserve integrity, and complete documentation including technical data sheets, certification of compliance, and lot traceability must accompany each shipment. The procurement is structured as a subcontract under a Small Business Set Aside designation, reserved exclusively for small businesses, with the NAICS code 424690 indicating wholesale distribution of construction materials. The solicitation was posted on August 5, 2026, with a response deadline of September 3, 2026, at 3:00 PM, and the place of performance is specified as Bellingham. The contracting authority is the SFLC Procurement Branch 1 under the Department of Homeland Security, and all submissions must comply with federal procurement guidelines to be considered.

Other Chemical and Allied Products Merchant Wholesalers

POSTED

DEADLINE

Quality Inspection and Non-Conformance MonitoringThe contract requires the provision of comprehensive quality inspection services to ensure adherence to established surface preparation, coating application, and welding standards. This includes conducting detailed measurements, maintaining accurate data logs, and formally documenting any non-conformances for corrective action. The scope centers on verifying technical compliance across project deliverables to uphold quality and safety benchmarks. This is a small business set-aside subcontract under NAICS code 541380, issued by the Department of Homeland Security through its Sflc Procurement Branch 1. The solicitation was posted on August 5, 2026, with responses due by September 3, 2026. Performance is expected to take place in Bellingham, and only eligible small businesses may submit proposals. The contract does not specify a point of contact or exact location details beyond the city, and all work must align with the specified technical standards and reporting requirements.

Testing Laboratories and Services

POSTED

DEADLINE

Structural Welding and Fabrication RepairsThe contract entails performing welding and structural repairs on ship components in full compliance with SFLC Standard Specification 0740 and NAVSEA Technical Publication 1688. All work must include non-destructive testing inspection and thorough documentation of weld quality to ensure adherence to military and maritime standards. The project is classified as a subcontract under a Small Business Set Aside, total, meaning only small businesses are eligible to bid, and it falls under NAICS code 332322 for fabricated metal product manufacturing. The solicitation was posted on August 5, 2026, with a response deadline of September 3, 2026, at 3:00 PM. Performance is required at the facility in Bellingham, and the contracting activity is led by the SFLC Procurement Branch 1 within the Department of Homeland Security. All repairs must be executed to precise technical specifications with full traceability and inspection records maintained for audit and quality assurance purposes.

Sheet Metal Work Manufacturing

POSTED

DEADLINE

Surface Preparation and Coating ApplicationThe contract requires the performance of abrasive blasting, surface cleaning, and application of protective marine coatings on ship structures in strict accordance with SFLC Std Spec 6310, ensuring all work meets industry standards for durability and corrosion resistance. Key tasks include the removal of soluble salts from surfaces and verification of coating thickness to guarantee proper adhesion and long-term performance under harsh marine conditions. All work must be completed at the designated place of performance in Bellingham, with adherence to the specified technical and quality control protocols. This is a subcontract under a Small Business Set Aside, classified under NAICS code 238290, and is managed by the SFLC Procurement Branch 1 within the Department of Homeland Security. The solicitation was posted on August 5, 2026, with proposals due by September 3, 2026, at 3:00 PM. Only small businesses are eligible to respond, as the acquisition is fully reserved for small business participation. The contract involves specialized maritime protective coating services critical to vessel maintenance and longevity, requiring experienced vendors with proven capability in marine coating systems and compliance with federal coating standards.

Other Building Equipment Contractors

POSTED

DEADLINE

Data Retrieval FailedThe contract, titled Data Retrieval Failed, was posted on August 5, 2026, with a response deadline of August 11, 2026, at 2:00 PM. It is classified as a subcontract and is associated with the Sflc Procurement Branch 1 under the Department of Homeland Security. The place of performance is located in Curtis Bay, Maryland, with a zip code of 21226. No solicitation number, set-aside type, NAICS code, organization type, or point of contact information is available. The system was unable to decompose subcontract opportunities or retrieve prime contract data, limiting visibility into specific scope or award details. The official listing can be accessed via the provided SAM.gov link.

Web Search Portals and All Other Information Services

POSTED

DEADLINE

52000QR260027124- CGC Charles Moulthrope Waterborne Hull Cleaning, Inspection and Anode Zinc Renewal Services

Solicitation # 52000QR260027124

The United States Coast Guard is seeking firm-fixed price quotations for waterborne hull cleaning, video inspection, and zinc anode renewal services for the USCGC Charles Moulthrope, to be performed at Berth SLOY5 with Toll Offshore Petroleum Services in Singapore. The work must be completed during one of two narrow windows—either August 11–12, 2026, or August 13–14, 2026—with the first date being the preferred schedule. This requirement is classified as an unusual and compelling urgency under FAR 13.106-1(b), as delays would risk mission continuity. All offerors must submit detailed cost breakdowns including unit and total pricing, payment terms, discount for prompt payment, UEI and CAGE codes, and must be registered in SAM.gov with an active Unique Entity ID prior to submission. Quotations must be received by August 7, 2026, at 2:00 p.m. Eastern Time and emailed to the specified point of contact with a carbon copy to the contracting officer. The procurement follows simplified acquisition procedures under FAR Part 13 and commercial item procedures under FAR Part 12, with NAICS code 336611 and no set-aside initially planned, though the government reserves the right to award it as a small business set-aside if advantageous. The contract will be awarded based on best value, considering technical compliance, price, past performance, and quality, with an evaluation under FAR 52.212-2. Offerors must provide warranty information and comply with all applicable FAR clauses, including those on trafficking in persons, equal opportunity, Buy American, electronic fund transfers, and prohibition of convict labor. The government may award on an all-or-none basis, selecting the lowest aggregate price rather than awarding separate contracts for individual items. Failure to provide a valid Letter of Authorization upon request will result in a determination of non-responsibility. All submissions must be on company letterhead and adhere strictly to the specified format and deadlines.

Ship Building and Repairing

POSTED

DEADLINE

Welin Lambie Davit Overhaul and Renewal Services

Solicitation # 70Z08026QMECP0024

The contract solicitation for Welin Lambie Davit Overhaul and Renewal Services, issued under solicitation number 70Z08026QMECP0024 by the SFLC Procurement Branch 1 of the Department of Homeland Security, is a Small Business Set Aside with a five-year period of performance from November 24, 2026, to November 23, 2031. The work involves the inspection, testing, overhaul, and renewal of TW.PIV 5.0B Dual Point Davits for U.S. Coast Guard vessels, performed initially at the contractor’s facility and culminating in delivery to the Coast Guard Yard in Baltimore, Maryland. The contract contains base CLINs for seven overhaul and three renewal tasks, with additional optional CLINs extending through four option years, giving the Government unilateral right to extend the effort incrementally. All work must comply with SFLC Standard Specifications 0000, 0740, and 6310, alongside industry standards including SSPC-SP-10/NACE No. 2 for surface preparation, ASTM D4417 for profile measurement, and BS EN 837-1 for pressure gauge calibration. The scope demands strict adherence to environmental regulations under 40 CFR and 33 CFR 154, with hazardous waste disposal limited to weekday business hours and requiring prior authorization for manifest use and removal from Coast Guard facilities. The contractor must appoint an Environmental Manager responsible for regulatory compliance, waste segregation, and maintaining environmental records, and is prohibited from using the Government’s EPA ID number for waste manifests. Inspection and acceptance occur onboard the vessel, with final approval resting solely with the Coast Guard through certified technical representatives and formal sign-off on QA-3A, QA-3B, and QA-5 documentation. All equipment must be packaged, marked, and labeled per SFLC Std Spec 0000, including the NSN 2030-99-454-8999, Part Number TW.PIV 5.0B, and the "Coast Guard Material Condition F" designation. Post-overhaul testing requires the presence of both Coast Guard personnel and a certified Welin-Lambie Technical Representative, with seven days’ notice mandated. The contract further necessitates adherence to ASTM D3951 for commercial packaging, incorporates unique requirements for NDE of welds per SFLC

Ship Building and Repairing

POSTED

DEADLINE

PUMP, CENTRIFUGAL

Solicitation # 70Z08026QCV177

The United States Coast Guard Surface Forces Logistics Center is seeking qualified vendors to provide open, inspect, report, and possible overhaul services for eight centrifugal pump units, part number 998-8003-A-04, manufactured by CARVER PUMP CO. INC, with national stock number 4320 01 616 3840. This acquisition is issued under NAICS code 811310 as a small business total set-aside, with quotations solicited via a combined synopsis/solicitation under FAR Subpart 12.6, and no formal written solicitation will be issued. Vendors must provide a firm fixed price for each unit, including all inspection and repair costs, with a separate inspection fee to be paid only if the item is deemed beyond economic repair. Only original equipment manufacturer parts are acceptable; substitutes or alternative part numbers are prohibited, and the U.S. Coast Guard does not have access to proprietary technical data. All units must be individually packaged and marked per strict requirements, including ASTM D-3951 standards, skid-mounted shipping containers with screw-fastened lids, proper cushioning, and stenciling with the NSN, part number, contract number, weight, quantity, “U.S. Coast Guard SFLC Material Condition A,” and other specified data in black enamel paint on a white background. Delivery is due no later than September 30, 2026, F.O.B. destination to Baltimore, Maryland, with shipments restricted to business hours Monday through Friday. Inspection and acceptance occur upon arrival after verifying compliance with packaging, marking, and transit damage standards; noncompliance will result in rejection and nonpayment. The award will be made to the lowest-priced offeror determined technically acceptable, with no multiple awards permitted. Vendors must be registered in SAM.gov and submit a complete copy of the Offeror Representations and Certifications form. The contract incorporates numerous FAR clauses related to labor standards, equal opportunity, trafficking in persons, cybersecurity restrictions, Buy American requirements, electronic payments, and record access, with flowdown obligations for subcontracts only where specified. All quotes must be submitted electronically to Nina Crosby by August 7, 2026, at 3:00 PM Eastern Daylight Time.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

DRYDOCK: USCGC FLORENCE FINCH DD FY2027

Solicitation # 70Z08027PBPLFFINCH

The U.S. Coast Guard is issuing a sources sought notice for the dry dock maintenance of USCGC FLORENCE FINCH under fiscal year 2027 funding, with a projected performance period of 119 calendar days from March 30, 2027, to July 27, 2027, though dates remain subject to government discretion. This notice is not a solicitation for bids or proposals but is intended to gather market information to inform future contracting decisions. The solicitation number is 70Z08027PBPLFFINCH, posted on August 5, 2026, with responses due by August 25, 2026. The North American Industry Classification System code is 336611, indicating shipbuilding and repairing. The procuring office is the SFLC Procurement Branch 1 under the Department of Homeland Security, located in Norfolk, Virginia. The place of performance has not been specified. Primary point of contact is Maggie Trader, reachable by phone at 757-628-4957 or email at Maggie.L.Trader@uscg.mil, with secondary contact Latoya Sorrell at 206-827-3116 or Latoya.N.Sorrell@uscg.mil. Further details and submission guidance can be accessed via the SAM.gov link provided.

Ship Building and Repairing

POSTED

DEADLINE

DRYDOCK: USCGC TERRAPIN DD FY2026

Solicitation # 70Z08026QPBPL0051

The USCGC TERRAPIN drydock contract for fiscal year 2027 is scheduled for performance from January 19 to February 16, 2027, and was solicited under number 70Z08026QPBPL0051 with a posted date of August 5, 2026, and a response deadline of September 3, 2026. This is a Small Business Set Aside contract classified under NAICS code 336611 for shipbuilding and repairing, indicating it is reserved exclusively for small businesses. The contract is managed by the SFLC Procurement Branch 1 located in Norfolk, Virginia, under the Department of Homeland Security, with performance to occur in Bellingham, Washington. The primary point of contact is Maggie Trader, reachable at 757-628-4957 and Maggie.L.Trader@uscg.mil, with LaToya Sorrell as the secondary contact at 206-827-3116 and Latoya.N.Sorrell@uscg.mil. The solicitation is a combined type, meaning it may include both competitive and non-competitive elements, and the full details can be accessed through the SAM.gov platform.

Ship Building and Repairing

POSTED

DEADLINE

VALVE, REGULATING FLUID PRESSURE

Solicitation # 70Z08026P21097B00

The U.S. Coast Guard Surface Forces Logistics Center is soliciting quotations for five units of a specific regulating fluid pressure valve, NSN 4810-01-650-4104, with part number DA-2501F-FL, manufactured by Metrex Valve Corp. This valve is a two-way marine water regulating valve designed for 210 WMEC 5 and 25 ton A/C systems, with a maximum inlet pressure of 150 PSI and a refrigerant operating range of 50–190 PSIG, set at 43 PSI, featuring flanges per ANSI B16.24-150#, flare fitting bellows, and a weight of 35 pounds per unit. The valve must be mounted straight-through with flanges and is required to be individually packaged with bar-coding; standard commercial packaging is unacceptable and will result in disqualification. Only brand-name parts are eligible for award; equivalents must meet all salient physical, functional, and performance characteristics and are subject to Coast Guard approval. The solicitation is issued under FAR Subpart 12.6 for commercial items using simplified acquisition procedures, with a firm fixed-price contract anticipated. The NAICS code is 332912, and the small business size standard is 700 employees. Offers must come from responsible sources registered in SAM.gov with a valid DUNS number and tax identification. The authorized dealer for Metrex products is JA Moody LLC, and only offers meeting all packaging, marking, and compliance requirements will be considered. The deadline for submission is August 11, 2026, at 10:00 a.m. Eastern Standard Time. All offerors must complete and submit the required FAR representations and certifications, including those related to the Buy American Act, subcontractor restrictions, executive compensation reporting, and prohibitions against contracting with inverted domestic corporations or corporate expatriates, as well as compliance with HSAR and CGAP clauses. The award will be made on a lowest price technically acceptable basis, and the government intends to award on an all-or-none basis.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

DEADLINE

FAN GALLEY, EXHAUST

Solicitation # 70Z08026QCV178

The U.S. Coast Guard Surface Forces Logistics Center is soliciting quotations for 33 galley exhaust fans with part number CMP-616-2T RD 180, manufactured by SODECA S.A., specifically designed for use on 154 WPC vessels. The complete assembly includes a marine motor with specifications of ABB254/440V 60 HZ.B34, featuring a foot mount without a baseplate or feet on the casing. This item must be sourced exclusively through Novenco Marine and Offshore via a U.S. distributor to ensure proper configuration. Each unit must be individually packaged per MIL-STD-2073-1E, Method 10, cushioned and enclosed in a single-wall ASTM-D5118 fiberboard box. Failure to comply with packaging, marking, or barcoding standards will result in rejection and return of the shipment at the vendor’s expense. Delivery is required F.O.B. destination to 2401 Hawkins Point Road, Baltimore MD 21226 no later than September 10, 2026. This solicitation operates under simplified acquisition procedures as a commercial item under FAR Subpart 12.6 and is classified under NAICS code 333413 with a size standard of 750 employees. Quotations must be submitted via email to Nina.M.Crosby@uscg.mil by August 7, 2026, at 3 PM Eastern Standard Time. All offerors must have an active DUNS number, be registered in SAM, and provide their Tax Identification Number. Compliance with FAR clauses including commercial item provisions, Buy American Act requirements, equal opportunity mandates, and other statutory conditions is mandatory. Offerors must also complete and submit FAR 52.212-3 with their quote and disclose their corporate status regarding foreign incorporation and inversion status under HSAR. The procurement includes applicable CGAP and FAR clauses affecting valuation, payment, and contractor obligations.

Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

DEADLINE