Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Transformer and Voltage Regulator Repair and Rebuilding

Active

Federal

Response Deadline08/28/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the physical and electrical repair and rebuilding of pad-mount transformers and voltage regulators to meet stringent military performance standards. Scope of work includes critical tasks such as winding replacement, core baking, gasket and bushing replacement, and complete repainting, ensuring operational reliability and environmental resilience under demanding conditions. All repairs must adhere to technical specifications required for military-grade equipment, with attention to durability, electrical integrity, and long-term serviceability. The contract is classified as a subcontract under NAICS code 335311 and is issued by the Department of Defense through W6QK Acc Anad. Performance is required at a single location in Anniston, Alabama, with a zip code of 36201. The solicitation was posted on August 7, 2026, and responses are due by August 28, 2026, at 9:00 PM Eastern Time. No set-aside designation is specified, and the contract is open to eligible subcontractors capable of meeting the technical and quality requirements established by the Department of Defense.

General Info

Repair and rebuild military-grade transformers and regulators to strict specs in Anniston, Alabama.

Agency

Department Of Defense → W6QK Acc AnadView Agency

NAICS

335311 - Power, Distribution, and Specialty Transformer ManufacturingView NAICS

Place of Performance

Anniston, AL, 36201, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 7

subcontract

Response DeadlineAug 28

Submission deadline

Response Deadline

08/28/2026, 09:00:00 PM UTCin 20 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W6QK Acc Anad

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → W6QK Acc Anad

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform physical and electrical repairs on pad-mount transformers and voltage regulators, including winding replacement, core baking, gasket and bushing replacement, and repainting to meet military performance standards.

Similar Contracts

Same NAICS industry code

Supply of Reconditioned or New TransformersThe contract seeks the supply of reconditioned or newly manufactured transformers to replace failed units, ensuring all units meet the technical specifications outlined by DME and comply with ANSI standards for performance and safety. The transformers must be capable of reliable operation under the same conditions as the units they replace, with no compromise in efficiency, durability, or regulatory compliance. All components and manufacturing processes must adhere to industry best practices to guarantee long-term functionality and minimize future failures. Subcontractors must submit proposals by the response deadline of August 26, 2026, and the contract is classified as a subcontract under NAICS code 335311, which pertains to transformer and electrical transformer manufacturing. The awarding entity is the City of Denton in Texas, and performance is expected to support infrastructure needs within the city’s jurisdiction. While specific delivery locations and point of contact details are not provided, vendors are expected to coordinate directly with the agency to confirm logistics and compliance requirements prior to delivery.

POSTED

about 19 hours ago

DEADLINE

Transformer Rebuilding and RefurbishmentThe contract seeks qualified contractors to rebuild or refurbish damaged or degraded electrical transformers to restore them to full operational capability in compliance with ANSI 1 and ANSI 2 specifications. Work includes critical tasks such as rewinding coils, repairing or replacing transformer cores, restoring tanks, and overall reconditioning to ensure the equipment meets industry standards for performance, safety, and durability. The scope requires technical expertise in high-voltage equipment restoration and adherence to rigorous quality controls throughout the process. This is a subcontract opportunity posted by the City of Denton in Texas with a response deadline of August 26, 2026. The North American Industry Classification System code is 335311, indicating the work falls under Electric Lamp and Lighting Fixture Manufacturing, though the scope clearly aligns with power transformer overhaul services. Interested parties must submit proposals before the deadline, and performance is expected to take place within the jurisdiction of the City of Denton, though the exact location is not specified. The posting is accessible via the provided online portal for further details and submission instructions.

POSTED

about 19 hours ago

DEADLINE

Specialized Power Supply Manufacturing & Integration

FA5682 31 Cons (unit 6102)

POSTED

DEADLINE

CABLE ASSEMBLY, SPEC / NSN: 6150-01-194-1219 / P/N: 10274508

Solicitation # SPRRA226Q0060

The solicitation seeks bids for a cable assembly identified by specification and NSN 6150-01-194-1219 with part number 10274508, under a Small Business Set Aside as a total set-aside, meaning only small businesses are eligible to compete. The NAICS code 335311 indicates the contract falls under the category of wiring device manufacturing. The opportunity was posted on August 7, 2026, and responses must be submitted by 9:00 PM EDT on August 21, 2026. The contracting activity is managed by the Defense Logistics Agency Aviation at Redstone Arsenal, Alabama, with the Department of Defense as the overarching agency. All performance and delivery obligations will be fulfilled at the specified location in Redstone Arsenal. The primary point of contact for inquiries is Delora Crutcher, reachable via email, with Michael Romine available as a secondary contact. Interested vendors can access additional details through the provided SAM.gov link.

Al DLA Aviation At Huntsville

POSTED

DEADLINE

CABLE ASSEMBLY,ELEC

Solicitation # SPRMM126QHD18

This contract pertains to the manufacture and delivery of the CABLE ASSEMBLY,ELEC under solicitation SPRMM126QHD18, issued by the Department of Defense through DLA Mechanicsburg, with a response deadline of July 27, 2026. The requirement specifies strict adherence to MIL-STD-130 Rev N for item marking and mandates compliance with the referenced Cage Code 53711 and reference number 8215283-002. All items must be procured from authorized distributors of the original equipment manufacturer, and proof of authorization must accompany offers. The contract requires full compliance with quality assurance standards, including contractor-conducted inspections, retention of inspection records for 365 days after final delivery, and the prohibition of substitutions without prior written approval from the NAVICP-MECH Contracting Officer, except for Code 1 part number changes. Packaging must conform to MIL-STD-2073, and delivery is subject to inspection at source as defined by DLA Procurement Note E06. The procurement follows the Lowest Price Technically Acceptable (LPTA) evaluation method and requires electronic submission of invoices and receiving reports through the Wide Area Workflow (WAWF) system. Contractors must register for the Procurement Integrated Enterprise Environment (PIEE) and Electronically Data Access (EDA) to view orders and modifications. The solicitation enforces mandatory use of the Workflow Pro Assist Module and prohibits unauthorized changes to production facilities unless approved, with a required $250 administrative cost reduction for each approved change. Compliance with Buy American and Small Business program representations is required, and all documents provided must include appropriate distribution statements under OPNAVINST 5510.1. The contract also includes provisions for security prohibitions, preference for U.S.-flag vessels, and adherence to all applicable国防相关条款, with notifications and communications to be directed through designated Navy supply channels and points of contact, including the designated POC for this solicitation.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

31 OSS Uninterpretable Power Supplies

Solicitation # A568226QA040

The U.S. Air Force is seeking a single Firm Fixed Price purchase order for 31 Uninterpretable Power Supplies as specified in Attachment 1 – Salient Characteristics, with no set-aside applicable and the North American Industry Classification System code 335311. All offers must strictly comply with the full solicitation, including any attachments or amendments, and delivery must be made directly to Aviano Air Base, Italy, with the zip code 33081. The solicitation, numbered A568226QA040, was posted on August 7, 2026, and responses are due by August 14, 2026, at 1:00 PM. The contracting office is FA5682 31 Cons (unit 6102), operating under the Department of Defense, with the primary point of contact being Michael Guillermo, reachable at michael_janwel.guillermo.2@us.af.mil or 314-632-5812, and Jason Haro listed as the secondary contact. The contract is being managed from APO AE 09604-6102, and further details are available via the SAM.gov link provided.

FA5682 31 Cons (unit 6102)

POSTED

DEADLINE

Transformers 1600 Watt

Solicitation # F3N0526042A006

The Department of Defense is soliciting 200 units of 1600-watt transformers for Ramstein Air Base in Ramstein-Miesenbach, Germany, under solicitation number F3N0526042A006. Each transformer must be a step-down unit converting 220/240 volts to 110 volts, featuring dual polarity EU plugs, two U.S. sockets compatible with Type A and B plugs, a 2-meter flexible cable with a Shuko Type F plug, gray steel sheet housing, a portable handle, and single-phase FFP-self-cooling technology. The units must include two primary circuit breakers rated at 4.5 amps functioning as both overload protection and on-off switches, positioned centrally above the sockets. The solicitation, posted on July 16, 2026, requires responses by July 27, 2026, with an anticipated award date of September 30, 2026. Evaluation will be conducted under FAR 52.212-2 using the most advantageous to the government standard, with no set-aside applied due to the overseas location of the requirement. Offerors are encouraged to submit technical sheets or photographs, but no formal attachments, packaging specifications, inspection criteria, or funding details are provided. Funds are not currently available, and no award will be made until appropriated. The contracting office is located in APO, AE, with the administrative office in Kaiserslautern, and the point of contact is Jonathan Rushin. The government retains the right to cancel the solicitation at any time without financial obligation to offerors.

FA5613 700 Cons Pk

POSTED

DEADLINE

ITB-2026-006 Penn Turpin Transformer Replacement

Solicitation # IFB-124434

The Town of Bedford Electric Department is soliciting bids for the replacement of a transformer at the Penn Turpin Station Electrical Substation in Bedford, Virginia, under solicitation number IFB-124434. The request seeks either a new transformer or a like-new unit that meets the operational and safety standards required for the substation’s continued service. Bids must be submitted by August 13, 2026, with the solicitation posted on July 21, 2026, and is governed under NAICS code 335311 for electrical equipment manufacturing. The contract is open to all qualified vendors without a specific set-aside, and performance will take place at the designated substation location in Bedford, VA. All proposals must be directed to Crystal McGraw, the point of contact, via email at chosey@bedfordva.gov or by phone at 540-587-6041. Interested parties can access additional details through the provided online portal. The transformer must be suitable for integration into the existing infrastructure at Penn Turpin Station, ensuring compatibility with current systems and compliance with local and industry safety regulations. Vendors are expected to provide thorough technical specifications, warranty information, delivery timelines, and installation capabilities as part of their submissions. Failure to meet all requirements may result in disqualification.

Town of Bedford

POSTED

DEADLINE

Pad-Mounted Single- and Three-Phase Distribution Transformers (25–2500 kVA)The contract entails the manufacture and delivery of pad-mounted single- and three-phase distribution transformers ranging from 25 to 2500 kVA, designed with tamper-resistant enclosures to meet ANSI C57.12.28 standards and comply with the Department of Energy’s 2016 efficiency requirements and other applicable ANSI specifications. These transformers are intended for public distribution networks and must be built to ensure long-term reliability, energy efficiency, and physical security against unauthorized access or damage. The equipment is subject to strict regulatory compliance and quality benchmarks to guarantee operational safety and performance under real-world utility conditions. The solicitation is issued as a subcontract by the City of Independence in Missouri and is open for bids with a response deadline of August 24, 2026. The North American Industry Classification System code 335311 identifies the scope as electrical equipment manufacturing, aligning with the production of transformers for distribution systems. While no specific place of performance or point of contact is provided, bidders are expected to fulfill delivery and compliance requirements as outlined in the technical specifications. The posting is accessible via the PublicPurchase platform, indicating a procurement process managed through a municipal procurement portal.

City of Independence

POSTED

DEADLINE

Pole-Mounted Single-Phase Distribution Transformers (15–167 kVA)The contract solicits the manufacture and delivery of single-phase, pole-mounted distribution transformers with ratings between 15 and 167 kVA, all of which must be filled with mineral oil and comply with ANSI C57.12.00 standards as well as the U.S. Department of Energy’s 2016 efficiency requirements. The transformers are intended for use in urban and suburban electrical distribution networks and must meet strict performance, safety, and energy efficiency benchmarks to ensure long-term reliability and regulatory compliance. All bids must be submitted by the deadline of August 24, 2026, and the opportunity is structured as a subcontract, indicating it is likely part of a larger procurement effort managed by the City of Independence, Missouri, under NAICS code 335311 for electric lighting and electrical equipment manufacturing.

City of Independence

POSTED

DEADLINE

Power Distribution Transformers

Solicitation # 26045

Independence Power & Light, the municipally-owned utility of the City of Independence, Missouri, is soliciting bids for the purchase of power distribution transformers under solicitation number 26045. All bids must be submitted online through the PublicPurchase platform by the deadline of August 24, 2026, at 7:00 PM Central Time; paper, fax, or email submissions will not be accepted and will not be returned. A virtual bid opening will be held on the same day via Microsoft Teams, with access provided through a dedicated meeting link and dial-in details, including a phone conference ID and passcode for participants unable to join via the platform. The request is open to qualified suppliers with no specific set-aside category designated, and all inquiries must be submitted through the PublicPurchase portal. The place of performance is in Missouri, and the primary point of contact for the solicitation is Richelieu Sese, reachable by phone at (816) 325-7090 or email at rsese@indepmo.org.

City of Independence

POSTED

DEADLINE

CBL ACTR/LOCK PWR

Solicitation # N0010426QNE12

This contract pertains to the manufacture and quality assurance of the CBL ACTR/LOCK PWR component, governed by specific engineering drawings and technical standards including MIL-STD-129 for marking, MIL-STD-973 for configuration control, and NAVSEA S9320-AM-PRO-020/MLDG for manufacturing certification. The item is intended for use on submarines or surface ships, mandating strict mercury-free requirements to prevent contamination of sensitive systems, with any proposed use of mercury requiring prior written approval and detailed safety protocols. Suppliers must maintain an ISO 9001 quality system and are responsible for all inspections, records, and compliance, with government oversight reserved at any stage. Configuration changes, deviations, or waivers must be formally approved and documented through specified channels to NAVICP-MECH in Mechanicsburg, PA. The solicitation, issued under N0010426QNE12 by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania, is subject to emergency acquisition flexibilities and will be awarded as a rated order under the Defense Priorities and Allocations System. It is a total small business set-aside with mandatory compliance with Buy American Act provisions, Small Business Subcontracting Plans, and cybersecurity maturity certification requirements. All contractual documents are deemed officially issued upon electronic transmission, and award requires bilateral acceptance. Vendors must adhere to stringent packaging standards under MIL-STD-2073, provide certified test reports for each assembly, and ensure subcontractors meet all terms. Proposals are due by September 8, 2026, and technical inquiries must be directed to the designated point of contact, James E. Lewis, via official email.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 1 month

More opportunities from Department Of Defense → W6QK Acc Anad

Same awarding agency

Voltage Regulator-Specific Inspection and CalibrationThe contract involves specialized inspection, load testing, and calibration of voltage regulators with a focus on tap changer operation and insulation integrity, requiring the use of precision electrical measurement tools to ensure operational accuracy and safety. The work demands technical expertise in electrical systems and adherence to stringent performance standards to maintain the reliability of voltage regulation equipment. The opportunity is issued as a subcontract under NAICS code 541380 by the Department of Defense through the agency W6QK Acc Anad, with a performance location in Anniston, Alabama, 36201. The solicitation was posted on August 7, 2026, and responses are due by August 28, 2026, at 9:00 PM Eastern Time. No set-aside provisions are specified, and the contract is open to qualified subcontractors meeting the technical and operational requirements outlined in the scope of work.

Testing Laboratories and Services

POSTED

DEADLINE

Industrial Painting and Surface Coating ServicesThe contract requires the application of an olive green industrial coating to transformer enclosures, with specific emphasis on achieving corrosion resistance and adherence to military appearance standards. Each enclosure must be labeled with 3-inch high kVA ratings to ensure clear identification and operational compliance. The work is classified as a subcontract under NAICS code 332813, which categorizes it within metal coating, engraving, and related services. Performance of the tasks must occur at the designated location in Anniston, Alabama, with a zip code of 36201. The opportunity was posted on August 7, 2026, and all proposals must be submitted by August 28, 2026, at 9:00 PM Eastern Time. The contracting entity is the Department of Defense, under the agency name W6QK Acc Anad, indicating a military procurement context requiring strict quality and uniformity controls.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

PCB-Free Transformer Oil Supply and ManagementThe contract requires the supply of new, non-reprocessed transformer oil that is free of PCBs and fully compliant with ANSI/ASTM D3487 standards, with verified concentrations under 50 ppm of polychlorinated biphenyls. The contractor must deliver the oil, manage its storage under appropriate conditions, and provide detailed batch-specific documentation confirming compliance, including certificates of analysis and chain-of-custody records. All materials must meet stringent environmental and safety specifications to ensure safe use in military equipment. The place of performance is located in Anniston, Alabama, with a zip code of 36201, indicating the oil will be delivered directly to a Department of Defense facility. This is a subcontract under NAICS code 424690, posted on August 7, 2026, with a response deadline of August 28, 2026, at 9:00 PM. The contracting agency is the Department of Defense under the office designation W6QK Acc Anad, and the solicitation is not subject to any set-aside classification. The supplier must ensure full traceability of each batch from production to delivery and maintain rigorous recordkeeping to satisfy compliance and regulatory obligations. There is no indication of subcontracting limitations or eligibility preferences, but adherence to federal procurement guidelines and environmental safety standards is mandatory.

Other Chemical and Allied Products Merchant Wholesalers

POSTED

DEADLINE

Transformer Inspection and Diagnostic Testing ServicesThe contract requires comprehensive visual and electrical diagnostic services on pad-mount transformers, including critical tests such as TTR, Megger, excitation, impedance, and no-load/full-load watts analysis to assess transformer health and performance. All work must be performed by qualified personnel using industry-standard methodologies to ensure accurate data collection and reliable results. The deliverables include detailed inspection reports containing nameplate information, test findings, and clear recommendations for repair, maintenance, or retirement of each unit based on the diagnostic outcomes. The contract is a subcontract under the Department of Defense, specifically managed by W6QK Acc Anad, with performance required at Anniston, Alabama, ZIP code 36201. It was posted on August 7, 2026, and proposals are due by August 28, 2026. The NAICS code 811310 indicates the work falls under repair and maintenance services for electrical equipment. While the solicitation number and point of contact are not provided, the opportunity is open for qualified subcontractors to respond before the deadline with proposals that demonstrate technical competency, experience with transformer diagnostics, and the ability to produce compliant and actionable inspection reports.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Area of Interest (AoI) – Pad Mount Transformer & Voltage Regulator Inspection and Repair (CSO-W911KF25SC002)

Solicitation # W911KF25SC002-AoI0012

ACC-ANAD is seeking qualified providers to deliver inspection and repair services for single-phase and three-phase pad-mount transformers and voltage regulators, with a focus on modern diagnostic methods to assess equipment condition accurately. Proposals must include a clear evaluation of each unit’s state, a definitive recommendation for repair or retirement, and a detailed cost estimate for all suggested repairs, ensuring informed decision-making and fiscal responsibility. The contract, if awarded, will consist of a base year and up to four optional extension years, contingent on performance and funding availability. This solicitation is issued as a CSO Area of Interest under number W911KF25SC002-AoI0012, with responses due by August 28, 2026. It is not a binding commitment or authorization to proceed; no costs incurred by offerors in developing responses will be reimbursed, and any subsequent contract will require a formal written directive from the Contracting Officer. ACC-ANAD retains the right to modify requirements and is under no obligation to issue a request for proposal or make an award. Interested parties must review the full posting on SAM.gov for submission guidelines, with all work performance centered in Anniston, Alabama, and inquiries directed to Katherine Fuller or Heather Glover.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Spare Parts and Component Supply for Industrial EquipmentThe contract calls for the supply of OEM or equivalent spare parts and components essential for the maintenance and emergency repair of CNC machines, TMDE, and power generation systems at a designated depot facility located in the 36201 zip code area. The procurement is structured as a subcontract under the NAICS code 423830, indicating it falls within the wholesale trade of machinery and equipment, and is managed by the Department of Defense through the agency W6QK Acc Anad. All parts must meet or exceed original equipment specifications to ensure operational readiness and compatibility with existing systems during urgent field repairs. The solicitation was posted on August 5, 2026, with responses due by September 1, 2026, at 10:00 p.m., providing a limited window for qualified suppliers to submit proposals. Delivery timelines will be tightly coordinated with deployment schedules to support mission-critical downtime reduction and continuous system functionality.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Power Generation Equipment Emergency MaintenanceEmergency repair and maintenance services are required for military diesel generators, power distribution units, and backup power systems at Anniston Army Depot, with a focus on ensuring uninterrupted operational readiness of critical power infrastructure. The contract is classified as a subcontract under NAICS code 811310, which pertains to mechanical repair and maintenance, and is issued by the Department of Defense under W6QK Acc Anad. All work must be performed at the depot located in the 36201 zip code, where responders must be prepared to address urgent failures and perform preventative maintenance on mission-critical equipment. The solicitation opened on August 5, 2026, with a strict deadline for responses set for September 1, 2026, at 10:00 PM Eastern Time, requiring proposers to demonstrate capability, rapid response times, and compliance with military standards for power system reliability.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Test, Measurement, and Diagnostic Equipment (TMDE) RepairThis contract involves on-site emergency repair and calibration of precision military test, measurement, and diagnostic equipment including multimeters, oscilloscopes, and specialized test sets. The work must be performed at the designated location with a zip code of 36201, ensuring rapid response to critical military instrumentation failures to maintain operational readiness. The contract is structured as a subcontract under the NAICS code 811212, indicating it is focused on electronic and precision instrument repair and maintenance services. The solicitation was posted on August 5, 2026, with a hard deadline for responses on September 1, 2026, at 10:00 PM Eastern Time. The contracting activity falls under the Department of Defense, specifically identified as W6QK Acc Anad, and the performance location is fixed at 36201, requiring vendors to be capable of mobilizing technical personnel and specialized tools on short notice to deliver emergency support in a military context.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Conventional Machine Tool Repair ServicesThe contract seeks qualified vendors to provide emergency repair and maintenance services for conventional, non-CNC machine tools including lathes, milling machines, grinders, and drill presses utilized in depot operations. These services are critical to maintaining operational readiness and must be performed promptly to minimize downtime of essential equipment. The work is to be carried out at a location with zip code 36201, and the contractor is expected to respond swiftly to urgent service requests, ensuring tools are restored to full functionality with minimal disruption to military logistics and production cycles. This subcontract opportunity, classified under NAICS code 811310 for machine shop, tool die, and mold making services, is issued by the Department of Defense under the agency name W6QK Acc Anad. The solicitation was posted on August 5, 2026, and responses are due by September 1, 2026, at 10:00 PM Eastern Time. Bidders must have demonstrated expertise in servicing industrial-grade mechanical equipment and be prepared to meet strict performance timelines. While no specific set-aside status is indicated, the work is exclusively designated as a subcontract and requires proven capability in field-based, high-priority maintenance operations within a military support environment.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

CNC Machine Tool Emergency Repair ServicesThe contract requires on-call emergency repair and maintenance services for CNC machine tools at the Anniston Army Depot, with a focus on urgent diagnostics, component replacement, and precise calibration to meet original equipment manufacturer standards. Services must be available to respond immediately to critical equipment failures to minimize operational downtime and ensure mission readiness. All work must adhere strictly to OEM specifications, and technicians are expected to possess the expertise to handle complex machinery failures under high-pressure conditions. The contract is classified as a subcontract under NAICS code 811310, with a proposed response deadline of September 1, 2026, and a posting date of August 5, 2026. Performance is required at the Anniston Army Depot in zip code 36201, with no specific set-aside designation indicated. The contracting agency is the Department of Defense, specifically under the W6QK Acc Anad organization, and all activities must align with federal defense procurement protocols, though further details regarding point of contact or location are not provided.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Area of Interest - Emergency Maintenance Equipment Support (CSO-W911KF25SC002)

Solicitation # W911KF25SC002-A011

The contractor is obligated to provide on-call emergency repair services to address equipment failures and restore all affected systems to their original operational status, bearing full responsibility for all resources required to fulfill this mission. This support is critical to maintaining readiness and ensuring timely recovery of essential equipment under unforeseen breakdown conditions. The solicitation, titled Area of Interest - Emergency Maintenance Equipment Support with number W911KF25SC002-A011, was posted on August 5, 2026, and requires responses no later than September 1, 2026. It falls under NAICS code 811310, indicating a focus on electronic and precision equipment repair and maintenance. The contract is managed by the Department of Defense through the Office of W6QK Acc Anad, located in Anniston, Alabama, with primary point of contact Crystal Hodges and secondary contact Heather Robinson. There is no set-aside designation, meaning the opportunity is open to all eligible businesses, and performance is expected to occur in Anniston, Alabama.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

SPECTOMETERS, LAB ENVIRONMENT AND MOBILE

Solicitation # W911KF26QA048

The contract solicitation seeks the procurement of four optical emission spectrometers and associated ancillary equipment, consisting of two benchtop units and two portable units, each pair to be installed and fully operational in their respective environments. The equipment is intended for use in both laboratory and mobile settings, supporting precise material analysis capabilities critical to defense and industrial applications. The solicitation, identified by number W911KF26QA048, falls under NAICS code 334516 and is managed by the Department of Defense through the office of W6QK Acc Anad located in Anniston, Alabama. All responses must be submitted by September 8, 2026, with the primary point of contact being Sara Young, reachable via email and phone for inquiries. The place of performance is listed with a zip code of 36201, indicating the primary delivery and installation location will be in Anniston, AL.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

in about 1 month