Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Unmanned Systems Supply Chain and Production Scalability Analysis

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks comprehensive analysis of the supply chain, production scalability, and cost structure for unmanned systems to validate their commercial viability and readiness for high-volume manufacturing. It requires detailed mapping of existing and potential suppliers, identification of bottlenecks, and modeling of production capacity growth to meet future demand at scale. The work will deliver a data-driven assessment of cost drivers, economies of scale, and manufacturing process efficiency, ensuring the solutions can be produced reliably and affordably in large quantities. The analysis must align with defense-grade standards and support decision-making for transitioning from prototype to sustained production. The effort is under the Naval Special Warfare Command as a subcontract within the Department of Defense, targeting a specific technical scope tied to unmanned systems. The performance location is designated as 92155, suggesting a focus on operations in or near San Diego, California, likely leveraging existing defense industry infrastructure. Proposals must be submitted by December 31, 2026, with no set-aside provisions specified, indicating open competition. This work is critical for establishing a robust industrial base capable of supporting operational needs through scalable, cost-effective manufacturing capabilities.

General Info

Subcontract for supply chain mapping and cost analysis to scale unmanned systems manufacturing.

Agency

Department Of Defense → Naval Special Warfare CommandView Agency

NAICS

541611 - Administrative Management and General Management Consulting ServicesView NAICS

Place of Performance

CA, 92155, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Naval Special Warfare Command
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → Naval Special Warfare Command
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Supply chain mapping, production scalability modeling, and cost analysis to demonstrate commercial viability and readiness for high-volume manufacturing of UxS solutions.

Similar Contracts

Same NAICS industry code

NAICS: 541611
New
Federal
Identity Management & Access Control ServicesThe contract entails the provision of identity management and access control services to ensure full compliance with the Department of State’s Personal Identification Card Policy, specifically focusing on the end-to-end lifecycle management of PIV cards for contractor personnel. This includes the enrollment, issuance, and ongoing access management of PIV credentials required for physical and logical access to U.S. Department of State facilities and systems stationed at the U.S. Embassy in Pretoria. Services must align with federal security standards to maintain the integrity of identity verification, credentialing, and access authorization processes for all contractor staff. The work is scoped as a subcontract under NAICS code 541611 and is targeted for performance in Pretoria, South Africa. The solicitation was posted on August 4, 2026, with a response deadline of August 20, 2026, indicating an urgent need to establish or renew these critical security operations. The contract emphasizes strict adherence to DOS policies, requiring the contractor to implement secure, auditable, and scalable processes for managing personnel access rights, ensuring that only authorized individuals are granted access to sensitive government resources. The service delivery must support continuous compliance, risk mitigation, and seamless integration with existing Department of State security infrastructures.
US Embassy Pretoria

POSTED

about 12 hours ago

DEADLINE

in 15 days
View Details
NAICS: 541611
New
Federal
Small Business Support Services DeliveryThe contract for Small Business Support Services Delivery seeks vendors to provide comprehensive technical assistance to small businesses through counseling, training, mentoring, and direct support in areas such as government contracting, access to capital, and innovation programs. The scope of work is designed to enhance small business capabilities and competitiveness by connecting them with critical resources and expertise needed to grow and navigate federal procurement systems. Services must be delivered in alignment with the NAICS code 541611, which covers management consulting services, emphasizing strategic advisory and capacity-building activities tailored to the needs of small enterprises. This subcontract opportunity is issued by the General Services Administration’s PBS R4 (AMD) Acquisition Management Division with a solicitation posted on August 4, 2026, and a response deadline of August 24, 2026. There is no specified set-aside classification or place of performance details provided, indicating flexibility in service delivery locations. Interested parties must submit proposals prior to the deadline to be considered for award, and the opportunity is available through the SAM.gov portal. The contract aims to foster economic development by strengthening the infrastructure that supports small business success within federal markets.
Pbs R4 (amd) Acquisition Management Division

POSTED

about 12 hours ago

DEADLINE

in 20 days
View Details
NAICS: 541611
New
Federal
Staff Augmentation
Solicitation # PANMCC26P0000048766
This is a sources sought notice issued by the Department of Defense through the 0419 Aq Hq Contracting Supply office for market research purposes only, aiming to identify capable small businesses to provide staff augmentation services in support of U.S. Army Central Command at Shaw Air Force Base, South Carolina. The government is not soliciting proposals or quotations at this time but is seeking capability statements from interested parties to assess the availability of qualified contractors for an anticipated single Firm Fixed Price purchase order. The required services will support key staff sections including G1, G2, G4, PAO, and HQBN USARCENT, focusing on logistics, human resources, personnel policy, and operations for all classes of supply excluding medical and communications security. Respondents must submit a maximum ten-page capability statement including company information such as name, address, CAGE code, and Unique Entity ID, along with a primary point of contact, business size classification, and socioeconomic status including eligibility under the Small Business Set Aside — Total program. The submission must outline the company’s relevant capabilities, provide up to three examples of past performance on similar government or commercial contracts within the last three years, and offer detailed feedback on the attached Performance Work Statement, including identification of ambiguities, risks, and recommendations aligned with industry best practices. Responses are due by August 9, 2026, at 12:00 PM EST and must be submitted in PDF format to the designated Army email addresses with a specific subject line. The solicitation is coded under NAICS 541611 for Management Consulting Services and is designated exclusively for small businesses, with no obligation imposed on the government to award a contract, as all submitted information may be used at the government’s discretion for any lawful purpose. The place of performance is specified as South Carolina with the contracting office located in Fort Bragg, North Carolina.
0419 Aq Hq Contracting Supply

POSTED

about 12 hours ago

DEADLINE

in 5 days
View Details
NAICS: 541611
New
Federal
T--CGB-400 IMT GIS Technical Service Support
Solicitation # 140R2026Q0014
The contract for CGB-400 IMT GIS Technical Service Support is a hybrid Firm Fixed Price and Time and Materials agreement, awarded under a Service-Disabled Veteran-Owned Small Business (SDVOSB) set-aside through NAICS code 541611, intended to provide comprehensive geospatial information systems support to the Bureau of Reclamation’s California Great Basin Region. The scope of work centers on operating the CGBGIS Service Center, delivering software and application development, conducting data analysis and modeling, acquiring and managing spatial data, and providing end-user technical support using ESRI GIS platforms and related technologies such as GPS and CAD systems. The contract has a one-year base period with two additional twelve-month option periods, and performance occurs primarily at the Bureau’s facility in Sacramento, California, with travel permitted to remote locations for meetings and training upon prior approval. Travel costs are capped at $44,800 annually, while technical and systems management services are delivered under firm fixed price terms. The contractor is expected to produce deliverables including biweekly progress reports, monthly management reports and invoices, digital and paper products from tasking assignments, and recommended GIS enhancements, all subject to strict quality metrics requiring timeliness and accuracy thresholds of 98% and 100% respectively, along with a 95% competency benchmark for technical staff responding to inquiries. Contract personnel must adhere to rigorous security and compliance standards, including completion of a National Agency Check (NAC) prior to reporting, compliance with the Department of the Interior’s IT Security Program and HSPD-12/FIPS 201 protocols, and mandatory use of a DOI Personal Identity Verification (PIV) card while on-site. A Quality Assurance Surveillance Plan (QASP) governs performance evaluation, with the Contracting Officer’s Representative (COR) responsible for monitoring deliverables, inspecting incoming shipments, and providing interim assessments, while the Contracting Officer makes final payment determinations within 45 days of each evaluation period. Invoices must be submitted monthly and include full supporting documentation to meet acceptance criteria, with payment deductions applied for disincentives within 60 days of the evaluation period or 30 days after invoice approval, whichever is later. The contractor must maintain valid automobile insurance, conduct themselves professionally, and respond immediately to any complaints that could affect facility operations. All work supports federal missions including flood studies, land use planning, and environmental compliance, and requires adherence to commercial best practices for packing and shipping, though no specific
Mp-Regional Office

POSTED

about 12 hours ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → Naval Special Warfare Command

Same awarding agency

NAICS: 314999
New
Federal
Canopy Relative Work (CRW) Parachute Canopies
Solicitation # H9224026QE064
The Naval Special Warfare Command is soliciting proposals for Canopy Relative Work (CRW) Parachute Canopies under a Small Business Set-Aside contract with NAICS code 314999, exclusively reserved for small businesses. To qualify as an offeror, entities must maintain an active registration on SAM.gov, be certified as small under the specified NAICS code, and submit a formal letter of intent via email to USSOCOMNSW01.06@socom.mil, including their company name and Unique Entity ID. The solicitation number is H9224026QE064, with a response deadline of August 5, 2026, and performance will be based in San Diego, California. Access to critical attachments—the Product Description, ELIN Price Worksheet, and Brand Name Justification—is restricted and granted only to eligible respondents who meet the pre-qualification criteria. The product specification includes a chargeable nose reinforcement option that must be priced separately, indicating a need for detailed technical and cost proposals. The evaluation factors, award basis, and detailed technical requirements are contained within these unaccessible attachments, suggesting a potential trade-off evaluation approach rather than a Lowest Price Technically Acceptable model, though this is not confirmed. The government expects compliance with Department of Defense standards, with MIL-STD-129 strongly implied for labeling and bar-coding, though specifics are not stated. No contract value, delivery schedule, payment details, or contracting officer information is provided in the open materials, and no formal FAR clauses or clause alternates are explicitly listed. All submissions must be sent via email to the designated point of contact, and no other submission formats are referenced.
All Other Miscellaneous Textile Product Mills

POSTED

6 days ago

DEADLINE

in about 16 hours
View Details
NAICS: 811310
Federal
Climbing Rock Wall Inspection Maintenance and Repair Services
Solicitation # H9224026QE062
The Naval Special Warfare Command is seeking qualified small businesses to provide Climbing Rock Wall Inspection, Maintenance, and Repair Services under a five-year Indefinite Delivery Indefinite Quantity contract with a maximum value of $150,000. This acquisition is conducted under FAR Part 12 as a commercial item procurement and is exclusively set aside for small businesses, with no competition open to large firms. All task orders will be awarded on a Firm Fixed Price basis, and the place of performance is identified as San Diego, California, 92155. Interested parties must access the full solicitation and any subsequent amendments solely through SAM.gov, where all official updates, including revised deadlines and Q&A documents, will be posted. Amendment 3 includes all previously submitted questions and answers. The solicitation window closed on August 5, 2026, with questions required to be submitted in writing to the designated point of contact, USSOCOMNSW01.11@socom.mil. Supporting documents include a Performance Work Statement, a Pricing Spreadsheet, and a Department of Labor wage determination. While specific evaluation criteria, contract clauses, inspection standards, and special requirements could not be retrieved due to access limitations, offerors were expected to review all available solicitation materials thoroughly, as failure to do so may impact responsiveness. The NAICS code 811310 applies, and all participation is contingent upon compliance with small business certification and submission requirements as outlined in the solicitation documents on SAM.gov.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

8 days ago

DEADLINE

in about 16 hours
View Details
NAICS: 238220
Federal
Mechanical and Pipefitting MaintenanceThis contract entails the installation, repair, and ongoing maintenance of piping systems, hydraulic components, and mechanical subsystems within specialized military equipment operated by the Naval Special Warfare Command under the Department of Defense. The work is classified as a subcontract with a total small business set-aside designation, meaning only small businesses certified under the Small Business Administration’s programs are eligible to bid, ensuring opportunities for qualified small firms to participate in critical defense logistics. The North American Industry Classification System code 238220 directly aligns the scope with specialized plumbing, pipefitting, and mechanical services required for high-performance military hardware. All performance must be carried out in support of naval special operations assets, with the requirement to maintain the highest standards of reliability and readiness under demanding operational conditions. The solicitation was posted on July 21, 2026, and responses must be submitted no later than August 21, 2026, at 4:00 PM Eastern Time, leaving a six-week window for qualified small businesses to prepare and submit proposals. While specific locations for performance are not detailed, the work is inherently tied to the operational needs of Naval Special Warfare units, implying potential deployment to field locations, secure facilities, or forward-operating bases. The procurement operates under strict federal contracting guidelines to ensure compliance with defense quality and security protocols. Bidders must demonstrate proven experience in maintaining complex mechanical and hydraulic systems under military specifications, along with the capacity to respond rapidly to mission-critical repairs.
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

14 days ago

DEADLINE

in 17 days
View Details
NAICS: 811310
Federal
Bullet Trap Integrity Inspection and RepairThe contract titled Bullet Trap Integrity Inspection and Repair is a subcontract issued by the Naval Special Warfare Command under the Department of Defense, designated with NAICS code 811310 for mechanical repair and maintenance services. It requires comprehensive structural and functional inspections of bullet traps to assess their integrity, with the goal of identifying damage caused by repeated firearm impacts and ensuring continued operational safety and performance. Contractors must be prepared to repair or replace compromised components, such as backstop panels, baffles, and support structures, using approved materials and methods that meet military standards for durability and ballistic containment. The solicitation was posted on July 20, 2026, with a firm response deadline of August 19, 2026, at 2:00 PM. The work is to be performed at locations determined by the Naval Special Warfare Command, though specific geographic details are not provided. The contract emphasizes technical expertise in ballistic equipment maintenance, requiring qualified personnel with experience in military-grade range infrastructure and safety protocols. Participation is open to subcontractors who can demonstrate capacity to deliver timely, high-quality inspections and repairs without disrupting active training operations, and all work must comply with Department of Defense safety and regulatory requirements.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

15 days ago

DEADLINE

in 15 days
View Details
NAICS: 811310
Federal
Range Trap Maintenance & Repair Services
Solicitation # H9224026Q1011
The Naval Special Warfare Command is procuring routine inspection, maintenance, and repair services for its Indoor Dynamic Shooting Range at Imperial Beach, California, under a five-year Indefinite Delivery/Indefinite Quantity contract with a maximum value of $249,000. The scope of work focuses exclusively on the Air Barrier System and Dust Collection Unit, including verification of damper positions, air velocities and volumes, filter conditions, and bullet trap integrity. The acquisition is being conducted as a sole source award to Savage Range Systems, Inc. under FAR 12.201-1, as the company is the sole designer, builder, and installer of the proprietary system with patented components that only its personnel can service or replace. No competitive solicitation is required due to the technical exclusivity of the equipment, and the contract will be fulfilled through Firm Fixed Price task orders issued over the five-year period. The place of performance is solely at the Imperial Beach facility, with no physical deliveries or FOB terms applicable. The NAICS code is 811310 with a size standard of $12.5 million, and while the contract does not specify evaluation factors, payment details, invoicing systems, or formal inspection standards, all work must conform to the manufacturer’s proprietary specifications. The contracting office is located in San Diego, California, and the solicitation number is H9224026Q1011, with proposals due by August 19, 2026, and no set-aside or socioeconomic preferences applied.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

15 days ago

DEADLINE

in 15 days
View Details