Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Sources Sought opportunity from Department Of Homeland Security was posted on January 31, 2024. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

USCG ANTHONY PETIT PETIT (WLM-558) DD FY24

Closed
70Z08524RP2023061613Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336611
New
Federal
COLUMBIA Class Tailcone Manufacture
Solicitation # N0016726R1005
The Naval Surface Warfare Center Carderock Division is soliciting proposals for the manufacture and acquisition of COLUMBIA Class submarine propulsor tailcones. The scope of work involves the procurement of materials, machining, assembly, painting, and delivery of up to eight tailcone kits, with a minimum of one kit required in the first year and options for seven additional kits. The contract also includes requirements for engineering support services, such as design reviews and the development of a manufacturing plan and final certification package. This is a DPAS rated DX-A3 order utilizing a combination of Fixed Price Incentive Firm Target for hardware, Cost Plus Fixed Fee for engineering services, and Cost No Fee for data requirements. Award will be determined via a best value tradeoff process evaluating technical capability, cost proposal, past performance, and small business participation, with technical capability being the most significant factor. Proposals must be submitted electronically through the PIEE Solicitation Module and organized into five distinct volumes. Key deliverables include a variety of Contract Data Requirements List items, such as monthly status reports, performance and cost reports, and conference minutes. The contract mandates strict adherence to security protocols for classified and unclassified data, compliance with ISO 9001:2008 or AS9100 quality standards, and the use of the Wide Area WorkFlow system for invoicing.
Nswc Carderock

POSTED

about 13 hours ago

DEADLINE

in 3 months
NAICS: 336611
New
Federal
CGC KUKUI DRYDOCK
Solicitation # 70ZU0227QIBCT0001
Solicitation 70ZU0227QIBCT0001 is an Indefinite Delivery Requirement Contract (IDR) for the FY27 drydock availability of the USCGC KUKUI (WLB 203), a 225-foot Buoy Tender homeported in Sitka, Alaska. The project involves comprehensive drydock repairs, including extensive preservation of the hull, exterior decks, superstructure, ballast and potable water tanks, and various internal mechanical components. Performance will take place at the contractor's facility from February 2, 2027, to May 18, 2027, with an anticipated award date of January 18, 2027. This requirement is a total small business set-aside under NAICS code 336611, with a size standard of 1,300 employees. The award will be granted to the responsible quoter providing the most advantageous quote, based on a lowest-price technically acceptable basis. Evaluation factors include a pass/fail assessment of technical capability and past performance within the last three years. Contractors must provide a comprehensive execution plan for lodging and messing, facility certifications, and docking calculations in accordance with SFLC Standard Specifications 0740 and 8634. Quotes must be submitted via email by November 23, 2026, and must include a detailed technical proposal separate from the pricing sheet. Order limitations are set with a minimum order of 1,000 dollars and a maximum combination order of 7 million dollars.
CG-SEA-C22

POSTED

about 13 hours ago

DEADLINE

in 25 days
NAICS: 336611
New
Federal
USCG STA COOS BAY (47302-47242) FY27 DD REPAIR
Solicitation # 70z04027SSBPL28928
The Department of Homeland Security, through the U.S. Coast Guard SEA-C office in Norfolk, Virginia, has issued a Sources Sought Notice for dry dock repair services for two vessels, USCG STA COOS BAY (47302) and CG STA COOS BAY (47242). The anticipated work is scheduled to begin on March 2, 2027, in Charleston, Oregon, with an estimated period of performance of 121 calendar days per vessel. The scope of work requires the contractor to provide all necessary personnel, equipment, materials, and facilities to perform comprehensive repairs, including underwater body preservation, hull plating inspections, propulsion shaft and rudder assembly services, and the provision of marine chemist and sea trial support. The government intends to award a single firm-fixed-price contract, with the final competition and set-aside decisions based on market research conducted under NAICS code 336611. Interested sources must submit their capabilities, including company identification, UEI number, and business size certifications, to Troy Elliott by November 12, 2026. Evaluation of capabilities will include a review of past performance on projects of similar scope and a commitment to submit a proposal as a prime contractor. Economic considerations for the future award will include foreseeable costs such as crew lodging, messing, and travel in accordance with Joint Travel Regulations.
CG-SEA-C23

POSTED

about 13 hours ago

DEADLINE

in 14 days

General Info

NAICS

336611 - Ship Building and Repairing

Place of Performance

CA, USA

Set-Aside

NONE

Documents

1

USCGC ANTHONY PETIT (WLM-558) Dry Dock Availability FY 24

DOCX, Low prioritysources-sought
Low

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseClosed
Posted

Sources Sought

Deadline changed

Response deadline changed from Feb 3, 2024 to Feb 8, 2024.

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Homeland Security → Sflc Procurement Branch 2(00085)
Contacts2 people available
OfficeALAMEDA, CA, 94501, USA

Full Description

Show more
***SEE ATTACHED FOR FULL TEXT NOTICE*** This is a SOURCES SOUGHT NOTICE / REQUEST FOR INFORMATION; not a pre-solicitation notice or solicitation for proposals/quotations. The applicable NAICS Code is 336611, Ship Building and Repairing, and the size standard is 1,300 employees. REQUIREMENT: This notice is issued by the U.S. Coast Guard, Surface Forces Logistics Center, and Alameda, CA to identify sources capable of providing the following: Contractor shall provide all necessary labor, materials, services, equipment, supplies, power, accessories, special tools and such other things as are necessary to perform DRY DOCK maintenance to the U.S. Coast Guard Cutter, USCGC ANTHONY PETIT (WLM-558) a 175 Coastal Buoy Tender. USCGC ANTHONY PETIT (WLM-558) DRY DOCK AVAILABILITY FY 24. ANTICIPATED NAICS CODE/SIZE STANDARD: The applicable NAICS Code is 336611, Ship Building and Repairing and the size standard is 1,300 employees. GEOGRAPHICAL RESTRICTION: N/A PLACE OF PERFORMANCE: VENDOR'S LOCATION DRY DOCK AVAILABILITY DESCRIPTION OF WORK: Contractor shall provide all necessary labor, materials, services, equipment, supplies, power, accessories, special tools and such other things as are necessary to perform DRY DOCK maintenance to the U.S. Coast Guard Cutter. Description: work includes approximately, but is not limited to, 82 Work Items including: steel repair, tank cleaning and inspection, ventilation cleaning and inspection, servicing machinery, insulation replacement, steel preservation, and deck repair. The scope of the acquisition is overhaul, renew, and repair various items. D-001 Fire Prevention Requirements D-002 Hull Plating, U/W Body, Inspect D-003 Hull Plating, U/W Body, Ultrasonic Testing O-004 U/W Body, Preserve, 100 percent O-005 U/W Body, Preserve, Partial, Condition A O-006 U/W Body, Preserve, Partial, Condition B O-007 U/W Body, Preserve, Partial, Condition C O-008 Hull Plating Freeboard, Preserve, Partial O-009 Hull Plating Freeboard, Preserve, 100 Percent D-010 Appendages, U/W, Leak Test O-011 Appendages, U/W, Internal, Preserve D-012 Chain Lockers, Clean and Inspect D-013 Tanks, Potable Water, Clean and Inspect D-014 Tanks, Ballast, Clean and Inspect D-015 Tanks, Dirty Oil and Waste, Clean and Inspect D-016 Z-Drive Input Drive Shaft, Bearings Inspect D-017 Z-Drive Propulsion Unit, Renew, Drydock D-018 Ship Service Diesel Generator, SSDG, Exhaust Piping, Commercial Clean D-019 Fathometer Transducer, Renew D-020 Vent Ducts, Engine And Motor Room, All, Commercial Cleaning D-021 Vent Ducts, Galley and Pantry Room, All, Commercial Cleaning D-022 Vent Ducts, Laundry Exhaust, Commercial Cleaning D-023 Vent Ducts, All Other, Commercial Cleaning D-024 Sea Valves and Waster Pieces, Overhaul Or Renew O-025 Sea Strainers, All Sizes, Renew D-026 Sea Strainers, Duplex, All Sizes, Overhaul D-027 Sea Bay, Clean and Inspect O-028 ? Sea Bay, Preserve 100% D-029 Potable Water Pneumatic Tanks, Clean and Inspect D-030 Thruster Unit (General), Overhaul D-031 Hull Fittings (Weight Handling Rigging Hardware), Inspect and Test D-032 Anchor Chains and Ground Tackle, Inspect and Repair D-033 Hull Fittings (Mooring and Towing), Inspect and Test O-034 Chain Locker, Preserve, 100 Percent O-035 Superstructure, Preserve, Partial D-036 Cathodic Protection, Zinc Anodes, Renew, D-037 Drydock D-038 Temporary Services, Provide - Cutter D-039 Sea Trial Performance, Support, Provide D-040 ATON Tie-down, Install D-041 Oily Water Separator, Replace D-042 Crane Winch DCV, Replace D-043 Thruster Quick Disconnects (QDs), Install D-044 Pump Room, Deck, Partial Preserve D-045 Vents, Preserve and Closures, Renew D-046 Potable Water Deck Connection Piping, Renew D-047 Cargo Hatch, Repair D-048 Vent Space (01-50-0-Q), Deck, Preserve D-049 Cross Deck Winch Kickpipe, Renew D-050 Doppler Speed Log, Upgrade D-051 Directional Control Valve, Upgrade D-052 Sea Strainers, Simplex, All Sizes, Clean and Inspect O-053 Tanks, Ballast, Preserve, 100 Percent O-054 Tanks, Ballast, Preserve, Partial O-055 Tanks, Dirty Oil and Waste, Preserve, 100 Percent, O-056 Tanks, Dirty Oil and Waste, Preserve, Partial, O-057 Tanks, Potable Water Preserve, 100 Percent O-058 Tanks, Potable Water, Preserve, Partial, D-059 Independent NACE Inspector (Level 3), Provide D-060 Tenting, Provide D-061 Hydraulically Operated Cargo Hatch, Inspect and Service D-062 Hydraulic Chain Stoppers, Inspect And Service D-063 Hydraulic Crossdeck Winches, Inspect And Service D-064 Hydraulic Inhaul Winch, Inspect And Service D-065 Mechanical Chain Stoppers, Inspect and Service D-066 Anchor Windlass, Inspect And Service D-067 Towing Bitts, Chocks, and Fairleads, Inspect and Test D-068 Warping Capstan (Aft), Inspect and Service D-069 Single Point Davit, Disassemble and Inspect D-070 Buoy Crane, Inspect And Service D-071 Decks - Exterior, Preserve, Non-Skid Broadcast Grit System D-072 Decks - Exterior (Buoy or Construction Deck), Preserve 100% D-073 Point of Use Potable Water Filters, Install D-074 Flame Detectors, Replace D-075 Vent Duct Systems, Repair D-076 Z-drive Standby Hydraulic and LO Pumps, Overhaul D-077 Drainage Valve and Remote Valve Operator, Renew D-078 MDE & SSDG Exhaust Stack Insulation, Renew D-079 Fuel Oil Piping, Renew D-080 Bilge Pump, Overhaul D-081 Bilges, Preserve D-082 Hull and Structural Plating, General, 12.75 lbs. Steel Plate, Renew ANTICIPATED PERIOD OF PERFORMANCE: May 7, 2024 through August 5, 2024 (Subject to change at the discretion of the Government). If the company is unable to meet this period of performance, it is incumbent upon the company to propose an alternative 90 calendar day period of performance. SUBMISSION OF INFORMATION: Companies having capabilities necessary to meet or exceed the stated requirements are invited to provide information to contribute to this market survey/sources sought notice including commercial market information and company information. Companies may respond to this Sources Sought Notice via e-mail to POC listed in the Sam.Gov announcement with the following information/documentation: Jerrod Gonzales @ contact@example.gov and Diego Avila @ contact@example.gov no later than 0800 PST Feb 07, 2024, with all of the following information/documentation: 1. Name of Company, Address and DUNS Number. 2. Point of Contact and Phone Number. 3. Business Size applicable to the NAICS Code: 8(a) Small Business Concern; b. HUBZone Small Business Concern; c. Service-Disabled Veteran Owned Small Business Concern (SDVOSBC); d. Veteran Owned Small Business Concern (VOSBC); e. ED Woman Owned Small Business Concern (EDWOSB); f. Woman Owned Small Business Concern (WOSBC); g. Small Business Concern; h. Large Business Concern 4. Documentation Verifying Small Business Certification: Please provide the following documentation as it applies to your company. a. If claiming 8(a) status, provide a copy of your 8(a) Certificate from SBA. b. If claiming HUBZone status, provide a copy of your HUBZone Certificate from SBA. c. If claiming SDVOSB status, provide documentation that shows the Service Disable Veteran (SDV) unconditionally owns 51 % of the business, controls the management and daily operations, and holds the highest officer position in the company. Documentation should also be provided to show that the SDV has a service-connected disability that has been determined by the Department of Defense or Department of Veteran Affairs. Finally, provide documentation that shows the business is small under the NAICS code 336611. d. If claiming VOSB status, provide documentation that shows the Veteran unconditionally owns 51% of the business, controls the management and daily operation, make long-term decisions for the business, and holds the highest officer position in the company that works at the business fulltime during normal working hours. The documentation should also show the business is small under the NAICS code 336611. e. If claiming EDWOSB status, provide documentation that shows the company is at least 51% owned by one or more women who are "economically disadvantaged", and primarily managed by an economically disadvantaged woman that make long-term decisions for the business, hold the highest officer position in the business and work at the business full-time during normal working hours. The documentation should also show the business is small under the NAICS code 336611. A woman is presumed economically disadvantaged if she has a personal net worth of less than $750,000 (with some exclusions), her adjusted gross yearly income averaged over the three years preceding the certification less than $350,000, and the fair market value of all her assets is less than $6 million. f. If claiming Woman Owned Small Business (WOSB) status, provide documentation that shows the company is at least 51% owned and controlled by one or more women, and primarily managed by one or more women that make long-term decisions for the business and hold the highest officer position in the business and work at the business full time during normal working hours. The women must be U.S. citizens. The documentation should also show the business is small under the NAICS code 336611. g. If claiming Small Business status, provide documentation to show the business is small under NAICS code 336611. 5. Statement of Proposal Submission: Statement that your company WILL submit a proposal as a prime contractor if a solicitation is issued as a result of this Sources Sought Notice. 6. Past Performance Information: Evidence of experience in work similar in type and scope to include contract numbers, project titles, and dollar amounts, points of contact and telephone numbers. If two companies are planning to conduct business and submit an offer as a Joint Venture or similar type of teaming agreement, they are requested to provide past performance information on projects of similar scope that they have performed together as a Joint Venture, if available. Providing individual past performance documentation from each company on separate projects where the two did not work together may be considered less relevant. SAM: Interested parties should register at the System for Award Management (SAM) website as prescribed in FAR Clause 52.204-7 System for Award Management (OCT 2018). SAM can be obtained by accessing the internet at https://www.sam.gov/SAM/ or by calling +1 (555) 000-0000. Disclaimer and Important Notes: This Sources Sought Notice is for market research purposes only and does not constitute a Request for Proposal/Quotation; and, it is not considered to be a commitment by the Government to award a contract nor will the Government pay for any information provided; no basis for claim against the Government shall arise as a result from a response to this Sources Sought Notice or Government use of any information provided. Failure to respond or submit information in sufficient detail may result in a company not being considered a likely offeror when making a decision on whether or how to set aside a solicitation for restricted competition.

More opportunities from Department Of Homeland Security → Sflc Procurement Branch 2(00085)

Same awarding agency

NAICS: 811210
Federal
TRS-3D /AN/SPS-75 Radar repairs/ overhaul services
Solicitation # 70Z08526RRJ001B00
The United States Coast Guard Surface Forces Logistics Center is soliciting repair and overhaul services for the AN/SPS-75 Air Search Radar System, specifically for the 418-foot Legend-class National Security Cutter fleet. This is a sole-source acquisition awarded to Northern Defense Industries, LLC, as they are the only authorized U.S. service provider for these proprietary OEM parts and technical data. The scope of work includes the disassembly, inspection, testing, repair, preservation, packaging, and marking of various critical components, such as power supplies, circuit card assemblies, and radar set subassemblies. All repairs must adhere to Original Equipment Manufacturer specifications to maintain operational readiness and system warranties. The contract is structured as a requirements contract with fixed-price delivery orders, consisting of a base period and three one-year ordering periods, with an additional six-month extension option. Performance is primarily conducted at the contractor's facilities, with a strict requirement for items to be preserved for at least two years of warehouse storage and packaged according to military standards. Award is based on technical capability and fair and reasonable pricing, with evaluations focusing on resources, quality assurance, and past performance. Administrative requirements include electronic invoicing via the Invoice Processing Platform and the provision of a dedicated Project Manager to serve as the primary point of contact.
Electronic and Precision Equipment Repair and Maintenance

POSTED

2 months ago

DEADLINE

in about 1 month
View Details
NAICS: 333995
Federal
APPLETON CYLINDER
Solicitation # 70Z08526Q40200B00
Solicitation 70Z08526Q40200B00 is a combined synopsis and request for quote issued by the U.S. Coast Guard Surface Forces Logistics Center for the procurement of specific brand name components from Appleton Marine Inc. This is a Brand Name Only solicitation with no substitutions authorized; therefore, interested vendors must be authorized distributors and provide an authorized distributor letter from the Original Equipment Manufacturer with their quotation. The requirement is a total small business set-aside under NAICS code 333995 and will result in a firm-fixed-price purchase order. The procurement consists of three line items: three Jib Cylinders (NSN 3040 01-F12-2745), four Luff Cylinders (NSN 3040 01-F12-2743), and ten Sheaves (NSN 3020 01-F12-2750). Strict packaging and marking standards apply, including MIL-STD-2073-1E Method 10 for cylinders and ASTM D5118 fiberboard boxes for sheaves, with all items requiring marking per MIL-STD-129R and barcoding per ISO/IEC-16388-2007. Delivery is required by September 30, 2026, to the USCG Surface Forces Logistics Center in Baltimore, Maryland, with shipping terms set as FOB Destination. Offers will be evaluated based on price and the ability to meet the brand name and authorized distributor requirements. Successful contractors must submit invoices through the Invoice Processing Platform with payment terms of Net 30. All submissions must include the vendor's Unique Entity Identifier and CAGE code, and offerors must maintain current representations and certifications in the System for Award Management.
Fluid Power Cylinder and Actuator Manufacturing

POSTED

3 months ago

DEADLINE

in 9 months
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS