This Solicitation opportunity from Government of Canada was posted on August 26, 2024. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

W1985-24A007 - Inspection of fall arrest equipment - RFP

Closed

WS4694358195International

Submission Closed09/05/2024, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310

New

SLED

Bus Fire Suppression System Maintenance

Solicitation # WMATA-0000010906

The Washington Metropolitan Area Transit Authority is seeking proposals for the maintenance of bus fire suppression systems under solicitation number WMATA-0000010906. This procurement falls under NAICS code 811310 and is managed through the agency's Virginia operations. The solicitation was posted on October 29, 2026, and requires all responses to be submitted by the deadline of November 4, 2026. Interested parties can access further details and manage their bids through the official WMATA supplier portal.

Washington Metropolitan Area Transit Authority

POSTED

DEADLINE

Kubota M8200 Clutch Replacement

Solicitation # kubota-m8200-clutch-replacement

Management and Training Corporation is soliciting lump sum fee proposals for the clutch replacement of a Kubota M8200 tractor with front wheel assist, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires a qualified contractor to provide all transportation, labor, materials, and equipment to diagnose and repair the clutch assembly and power take-off system. Key technical requirements include replacing friction discs, bearings, oil seals, and O-rings, resurfacing the flywheel, and replacing hydraulic pipes and filters as needed. The contractor must perform all work according to manufacturer specifications and provide a final summary of diagnostic findings, an itemized list of replaced parts, and warranty documentation upon completion. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified entities. Bids must be submitted via email to Angie Mahoney by 3:00 PM CST on November 3, 2026, and must include a bid sheet, proof of insurance, a completed supplier packet with a W-9, and applicable SBA certification letters. Award decisions will be based on best value, with a focus on administrative compliance and technical qualifications. The contract is subject to various Federal Acquisition Regulations, including standards for combating trafficking in persons, Buy American restrictions, and Service Contract Labor Standards per Wage Determination 2015-4687 Revision 31 for Kentucky.

Earle C. Clements Job Corps Center

POSTED

DEADLINE

Kubota Attachment Installation and Calibration

Department of Blind and Vision Impaired

POSTED

DEADLINE

ANNUAL ROTATING EQUIPMENT INSPECTION, TESTING, REPAIR, RECONDITIONING AND STORAGE SERVICES

Solicitation # 2026-RFP-130

Solicitation 2026-RFP-130, issued by the City of Lakeland, seeks qualified contractors to provide annual inspection, testing, repair, reconditioning, and storage services for critical rotating equipment at the McIntosh and Larsen Power Plants. The scope of work covers a wide range of industrial machinery, including low- and medium-voltage AC and DC electric motors, as well as circulating water and condensate pumps. Required services include clean inspect test (CIT) procedures, troubleshooting, motor rewinding, machining, welding, and dynamic field balancing. The contractor is also responsible for the pickup, transportation, and secure indoor storage of equipment, ensuring strict preservation measures such as periodic shaft rotation and moisture control to prevent corrosion and damage. The selection process is based on a points-based criteria to identify the vendor most responsive to the city's needs. Proposers must submit their responses via the OpenGov portal by October 30, 2026, and provide essential documentation including a signed W-9, Sunbiz registration, a notarized indemnification agreement, and a human trafficking affidavit. Contractors must adhere to strict safety standards, including OSHA compliance and specific certification for crane operations and critical lifts. Furthermore, vendors are required to maintain insurance policies with AM Best ratings of no less than A and must undergo a safety audit covering EMR and employee training records to ensure compliance with city risk management standards.

LE - Production - MPP

POSTED

DEADLINE

Marine Mechanical Systems Repair

POSTED

DEADLINE

On-Call Ad-Hoc Elevator Inspections

257-NETWORK Contract Office 17 (36C257)

POSTED

DEADLINE

Specialized Five-Year Elevator Full-Load Testing

257-NETWORK Contract Office 17 (36C257)

POSTED

DEADLINE

Semi-Annual and Annual Elevator Inspection Services

257-NETWORK Contract Office 17 (36C257)

POSTED

DEADLINE

Fuel Dispenser Technical Installation & RepairThis subcontract for Fuel Dispenser Technical Installation and Repair involves the physical replacement and calibration of damaged parts within Tatsuno dispensing units for prime contractors working on Pakistan State Oil Company Ltd projects in Pakistan. The scope of work includes removing damaged components, installing new parts, testing for leaks, and utilizing specialized calibration equipment and fuel-safe tools to ensure accurate fuel measurement and fully operational units. To qualify for this engagement, providers must hold technical certification for Tatsuno equipment and adhere to ATEX/IECEx hazardous area safety standards. The opportunity was posted on October 29, 2026, with a response deadline of November 4, 2026, falling under NAICS code 811310.

Pakistan State Oil Company Ltd

POSTED

DEADLINE

RFP RF-32079-AS (Replacement of Damaged Parts of Tatsuno Dispensing Unit at NVRO, BWP Division)

Solicitation # RF-32079-AS

Solicitation RF-32079-AS is issued by the Pakistan State Oil Company Ltd for the replacement of damaged parts of a Tatsuno dispensing unit located at NVRO within the BWP Division. This procurement opportunity was posted on October 29, 2026, with a response deadline set for November 4, 2026, at 09:15. The place of performance for these services is located in Pakistan. The primary point of contact for this solicitation is Arslan Sajjad, who can be reached via email at [email hidden]. While the solicitation is hosted on the Ariba portal, specific details regarding pricing, evaluation factors, and the detailed statement of work were not provided in the available metadata.

Pakistan State Oil Company Ltd

POSTED

DEADLINE

Fisher Recirculation Valve and Actuator DCI and OverhaulThis subcontract involves providing Disassemble, Clean, Inspect, and Overhaul services for two Fisher recirculation valves and actuators supporting prime contractors on City of Redding projects. The scope of work includes the disassembly of valve bodies, cleaning and inspection of diaphragms, seats, and seals, as well as the machining and lapping of valve seats. Additionally, the contractor is responsible for calibrating and testing actuators using Fisher OEM seal kits and specialized valve testing benches to ensure fully overhauled and calibrated equipment is delivered. The project is located in Redding, California, under NAICS code 811310. Interested parties must submit their responses by the deadline of December 4, 2026.

POSTED

DEADLINE

WEG Industrial Motor DCI and OverhaulThis subcontract involves providing Disassemble, Clean, Inspect, and Overhaul services for two WEG motors supporting prime contractors on City of Redding projects in Redding, California. The scope of work includes the complete disassembly and cleaning of housings and windings, detailed inspections of rotors, stators, and bearings, and the necessary rewinding or repair of electrical components. The service provider is responsible for replacing bearings and conducting precision alignment and electrical integrity testing to ensure the motors are fully functional. The final deliverable consists of fully overhauled and tested WEG motors. This opportunity is categorized under NAICS code 811310, with a response deadline of December 4, 2026.

City of Redding

POSTED

about 9 hours ago

DEADLINE

in about 1 month

AI Contract Overview

Public Works and Government Services Canada, acting on behalf of the Department of National Defence, is seeking proposals for the inspection of fall arrest equipment for the 202 Workshop Depot. The scope of work includes the professional inspection of equipment and the subsequent repair or replacement of any defective items as necessary. These services will be performed across two primary locations: Region 1 in Montreal and Region 2 in Ottawa. This federal solicitation, identified by number WS4694358195, was posted on August 26, 2024. Interested parties must submit their responses by the deadline of September 5, 2024, at 2:00 PM. The procurement process is being managed by the Government of Canada, with Alina Cocieru serving as the primary point of contact for this requirement.

General Info

Inspection and repair of fall arrest equipment in Montreal and Ottawa for DND.

Agency

Government of Canada → Department of Public Works and Government Services

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

*Montréal *Ottawa, CAN

Set-Aside

NONE

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedAug 26

Solicitation

Response DeadlineSep 5

Deadline has passed

Submission Closed

09/05/2024, 02:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Department of Public Works and Government Services

Contacts1 person available

OfficeN/A

Organization / AgencyGovernment of Canada → Department of Public Works and Government Services

Office AddressN/A

Contacts

Cocieru Alina (SPAC/PSPC) (elle-la / she-herPoint of Contact

contact@example.gov

Full Description

PWGSC, on behalf of the Department of National Defence, is issuing this request for proposal (RFP) for the acquisition of inspection services of fall arrest equipment, including repair or replacing of defective equipment as required for the 202 Workshop Depot located in Region 1 Montreal and Region 2 Ottawa, as detailed in Annex Statement of Work.