Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Water Treatment System Package Supplier

Active

State & Local

Response Deadline11/19/2026, 10:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity is for a Water Treatment System Package Supplier to design, supply, and manufacture a pre-engineered stormwater polishing system for prime contractors operating on Port of Vancouver USA projects. The scope of work involves the production of skid-mounted equipment, specifically featuring flow-through chemical dosing, adsorption multi-media vessels, and sand filtration equipped with automatic backwash. Technical requirements mandate the use of carbon steel vessels and UL-labeled 480V control panels to ensure a fully operational system upon delivery. Eligible manufacturers must possess a minimum of five years of experience in producing this specific type of equipment. Interested parties should note that the solicitation was posted on October 15, 2026, with a response deadline set for November 19, 2026. The project falls under NAICS code 332312 and is centered on providing critical water treatment infrastructure for the Port of Vancouver USA.

General Info

Agency

Washington → Port of Vancouver USA

NAICS

332312 - Fabricated Structural Metal Manufacturing

Place of Performance

WA, USA

Set-Aside

NONE

Documents

This scope was carved out of 26-64.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Terminal 4 Pond Polishing System

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 15

subcontract

Response DeadlineNov 19

Submission deadline

Response Deadline

11/19/2026, 10:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyWashington → Port of Vancouver USA

ContactsNo contacts available

OfficeN/A

Organization / AgencyWashington → Port of Vancouver USA

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies and designs a pre-engineered stormwater polishing system for prime contractors on Port of Vancouver USA projects. Manufactures skid-mounted equipment including flow-through chemical dosing, sand filtration with automatic backwash, and adsorption multi-media vessels. Requires carbon steel vessels and UL-labeled 480V control panels. Manufacturer must have 5 years of experience in this equipment type. Delivers a fully operational polishing system.

Similar Contracts

Same NAICS industry code

Battery Enclosure and Hardware FabricationThis subcontract for Battery Enclosure and Hardware Fabrication involves the production of outer casings, terminals, connectors, and mounting hardware to support DLA Weapons Support battery assembly projects. The selected provider will be responsible for precision machining and the application of corrosion-resistant coatings to ensure all components meet strict technical drawings. Notably, the contract explicitly prohibits the use of additive manufacturing processes in the fabrication of these parts. Managed by the Department of Defense through DLA DIST San Joaquin, the work is to be performed in Tracy, California. The solicitation was posted on October 15, 2026, with a response deadline of October 26, 2026. The project falls under NAICS code 332312 and requires the delivery of completed housings and hardware kits to prime contractors.

DLA DIST SAN JOAQUIN

POSTED

about 8 hours ago

DEADLINE

M1 Tank Rack Fabrication and AssemblyThis subcontract involves the fabrication and assembly of 115 M1 Tank Racks for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Land Supplier Operations. All work must be performed in accordance with specific TDP Reference Drawings and will be executed in Texarkana. The project is a total small business set-aside under NAICS code 332312. To be eligible, contractors must maintain SAE AS9003 or ISO 9001 certification, ensure full ITAR/EAR compliance, and meet CMMC Level 2 security standards.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 8 hours ago

DEADLINE

Vehicle Boarding Ladder FabricationThis subcontract involves the fabrication and assembly of eight uncoated vehicle boarding stair assemblies for prime contractors supporting the DLA Weapons Support Land Supply Chain. The project requires the use of industrial cutting, bending, and welding equipment to produce the assemblies in strict accordance with drawings 5-13-7401,B and PL5-13-7401, while adhering to the DLA Master List of Technical and Quality Requirements. The work is categorized under NAICS code 332312 and will be performed in New Cumberland. Interested parties should note the response deadline of October 26, 2026, for this Department of Defense requirement.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

Fabrication of Double Angle Bracket (NSN 5340-01-645-4743)This subcontract involves the fabrication of one unpainted double angle bracket for the DLA Weapons Support Land Supply Chain. The manufacturer must produce the part in strict accordance with Army technical drawings and the NSN 5340-01-645-4743 data package using precision metal fabrication equipment. All materials used in production must comply with the Buy American Act and the Berry Amendment. To be eligible, the contractor must maintain JCP certification for ITAR/EAR data and hold either an SAE AS9003 or ISO 9001 quality certification. The opportunity was posted on October 15, 2026, with a response deadline of October 26, 2026. This project falls under NAICS code 332312 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

Solicitation # SPE8EE-27-T-0187

Solicitation SPE8EE-27-T-0187 is a fixed-price contract issued by the DLA Troop Support Construction and Equipment Manufacturing and Construction office for the procurement of 12 units of Commercial Hardware III IST FCEB, identified by CAGE/PN 05259 / 145G0024-16. The items are to be delivered to the USA DEP Corpus Christi facility in Texas, with an original required delivery date of October 14, 2026, and a delivery timeframe of five days after award. Shipping must be conducted via the fastest traceable means, and parcel post is strictly prohibited. Inspection and acceptance will take place at the destination. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, with DLA Master List of Technical and Quality Requirements taking precedence. Palletization must comply with RP001. For any hazardous materials, the contractor is required to provide Safety Data Sheets and label containers according to the Hazard Communication Standard 29 CFR 1910.1200. Invoicing and payment processing must be handled electronically through the Wide Area WorkFlow system. The contract also incorporates various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 regarding the safeguarding of covered defense information.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 8 hours ago

DEADLINE

Solicitation # SPE4A6-27-T-4657

Solicitation SPE4A6-27-T-4657 is a fixed-price procurement issued by the DLA Weapons Support ASC Commodities Division for the supply of 88 machine bolts, identified by NSN 5306-01-279-8803. This acquisition is a total small business set-aside under NAICS code 332312. The required delivery date is December 22, 2027, with a need ship date of April 6, 2027, and the place of performance is New Cumberland, Pennsylvania. Inspection and acceptance will occur at the destination. The contract incorporates stringent technical and quality requirements from the DLA Master List, including specific packaging standards under RP001 and marking requirements under RQ017 and RQ011. Due to the nature of the technical data, the item is subject to export controls under ITAR or EAR, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specific DLA training. Compliance with the Buy American Act and the Berry Amendment is mandatory, and payment must be processed electronically via the Wide Area WorkFlow system. Additionally, the contract requires adherence to CMMC Level 2 cybersecurity standards and hazardous material labeling per 29 CFR 1910.1200.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

BUSHING, MACHINE THREAD

Solicitation # SPE4A7-27-T-1394

Solicitation SPE4A7-27-T-1394 is a procurement request by the Defense Logistics Agency for 56 units of machine thread bushings, identified by NSN 5365-01-270-1358. The items are designated as critical application items and may require specific casting or forging tooling. Delivery is set for FOB Origin with a required delivery date of April 6, 2027, and a need ship date of April 13, 2027. Both inspection and acceptance will take place at the destination, specifically Arizona Industries for the Blind in Phoenix, Arizona. The contract mandates strict adherence to quality and packaging standards, including ASTM D3951, MIL-STD-129 for marking, and RP001 for palletization, with the DLA Master List of Technical and Quality Requirements taking precedence. Sampling must follow MIL-STD-1916 or ASQ H1331. Key regulatory requirements include compliance with the Buy American Act, DFARS 252.204-7012 for safeguarding covered defense information, and the use of the Wide Area WorkFlow system for electronic invoicing. The acquisition falls under NAICS code 332312 and requires offerors to be registered in the System for Award Management.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

Steel Fabrication and Container ConversionThis subcontract for Steel Fabrication and Container Conversion involves performing structural modifications to shipping containers for prime contractors supporting Texas A&M Forest Service projects. The scope of work includes cutting openings for doors, windows, HVAC, and electrical or communications equipment, followed by framing and reinforcing those openings to ensure structural integrity. Additionally, the contractor is responsible for applying a beige exterior paint finish designed for long-term outdoor exposure and delivering the completed modified container shells. The opportunity is categorized under NAICS code 332312 and was posted on October 15, 2026, with a response deadline of October 30, 2026. Interested parties can find further details through the Texas SmartBuy portal under solicitation IFB-27-004.

Texas A&M Forest Service

POSTED

about 9 hours ago

DEADLINE

IIRC High-Cube Shipping Container SupplierThis subcontract agreement establishes the procurement of two new production model 40-foot high-cube IIRC steel shipping containers for prime contractors working on Texas A&M Forest Service projects. The containers must be constructed from Corten weathering steel to ensure they are structurally sound, weather-tight, free from corrosion, and fully IIRC certified. The solicitation was posted on October 15, 2026, with a response deadline of October 30, 2026. This procurement falls under NAICS code 332312 and is managed through the Texas state agency system.

Texas A&M Forest Service

POSTED

about 9 hours ago

DEADLINE

Hydraulic Line Guard ManufacturingThis subcontract involves the manufacture and supply of hydraulic line guards for the M109 Tank, supporting prime contractors under the DLA Weapons Support Land Supply Chain. The selected provider must fabricate metal guards in strict accordance with NSN 2520-00-194-2448 and the DLA Master List of Technical and Quality Requirements, ensuring all finished products are packaged according to RP001 standards. Due to the nature of the defense work, the contractor is required to maintain CMMC Level 2 certification and full ITAR and EAR compliance. The opportunity is categorized under NAICS code 332312, with a response deadline set for October 26, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Ladder Mounting Assemblies (NSN 4210-01-518-5296)This subcontract involves the manufacture or sourcing of ladder mounting assemblies for prime contractors supporting DLA Troop Support supply contracts. The assemblies must strictly adhere to NSN 4210-01-518-5296 and Ziamatic Corp P/N LAS-975-24 specifications. All deliverables must be packaged according to RP001 and ASTM D3951 standards and marked in compliance with MIL-STD-129. The contract is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance taking place in New Cumberland, Pennsylvania. A critical requirement for the provider is full compliance with DFARS 252.204-7012 regarding the safeguarding of covered defense information. The response deadline for this opportunity is October 26, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supply of Metal Plates (NSN 9515-01-728-0284)This subcontract involves the supply of 18 specialized metal plates for prime contractors supporting DLA supply contracts under the Department of Defense. The plates must be manufactured or sourced in strict accordance with P/N 12-475 and TDP Rev A Gen 1, with a specific prohibition against the use of additive manufacturing. Compliance with military standards is required, specifically MIL-STD-129 for marking and MIL-STD-2073-1E, IP083, and RP001 for packaging. Additionally, the provider must supply Safety Data Sheets as required by 29 CFR 1910.1200(g). The contract is associated with NAICS code 332312 and is managed by DLA DIST SAN JOAQUIN, with the place of performance located in Tracy, California. The solicitation was posted on October 14, 2026, with a response deadline of October 26, 2026.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

More opportunities from Washington → Port of Vancouver USA

Same awarding agency

Electronic Equipment Removal and Disposal SpecialistThe Electronic Equipment Removal and Disposal Specialist subcontract involves providing removal and disposal services for prime contractors supporting security upgrade projects at the Port of Vancouver USA. The selected specialist will be responsible for identifying and removing obsolete Wi-Fi devices, antennas, and related cabling from building structures and poles using manlifts, followed by the transport and disposal of these materials on Port property to ensure the site is completely cleared. Qualified contractors must possess TWIC credentials and adhere to the prevailing wage rates for Clark County and Southwest Washington. This opportunity is categorized under NAICS code 238990, with a response deadline set for November 19, 2026.

All Other Specialty Trade Contractors

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Security Camera Installation and Network Integration ContractorThis subcontract involves providing installation and integration services for security upgrade projects at the Port of Vancouver USA. The scope of work includes the removal of 134 non-compliant cameras and obsolete Wi-Fi devices, followed by the installation of new cameras on buildings and poles using Cat5e and Cat6 cabling. The contractor is responsible for pre-configuring the hardware and ensuring full integration with the Video Management System to deliver a completely operational system along with all necessary manuals and as-built documentation. Qualified contractors must meet specific safety and security requirements, including TWIC credentials, manlift certification, and fall protection training. This opportunity is categorized under NAICS code 561621, with a response deadline set for November 19, 2026.

Security Systems Services (except Locksmiths)

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Security Camera and Mounting Hardware SupplierThis subcontract involves the procurement and delivery of security camera hardware for security upgrade projects at the Port of Vancouver USA. The supplier is responsible for providing 134 IP cameras, specifically including 2MP license plate capture cameras with infrared illumination, along with essential mounting accessories such as pole-mount adapters, conduit back boxes, PTZ pendant arms, and industrial PoE midspan injectors. All provided equipment must be VMS compatible and strictly adhere to the Build America, Buy America Act. The selected supplier will deliver the hardware directly to secure storage facilities at the Port. The response deadline for this opportunity is November 19, 2026.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Professional Land SurveyingThis subcontract opportunity for Professional Land Surveying involves providing precision surveying services for hydraulic gradients on projects located at the Port of Vancouver USA. The selected contractor will be responsible for verifying critical elevations for tank tops, tank bottoms, overflows, weirs, and piping inverts. To ensure accuracy, the work must be performed using high-precision Total Station and GPS equipment, and the final deliverables must include certified layout and elevation reports. A Licensed Professional Land Surveyor is required to oversee and execute the technical requirements of this contract. Interested parties must submit their responses by the deadline of November 19, 2026. The project falls under NAICS code 541370 and is designed to support prime contractors operating within the port's jurisdiction.

Surveying and Mapping (except Geophysical) Services

POSTED

about 18 hours ago

DEADLINE

in about 1 month

High-Performance Coatings SpecialistThe High-Performance Coatings Specialist subcontract involves providing specialized surface preparation and industrial coating services for prime contractors operating on Port of Vancouver USA projects. The scope of work focuses on executing abrasive blasting and the application of high-performance coatings in strict accordance with the project Finish Schedule to ensure the delivery of protected industrial surfaces. All work must be performed in full compliance with established VOC regulations. This opportunity is categorized under NAICS code 238320 and was posted on October 15, 2026. Interested parties must submit their responses by the deadline of November 19, 2026. The contract is managed through the Port of Vancouver USA procurement system.

Painting and Wall Covering Contractors

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Process Piping & Mechanical ContractorThis subcontract opportunity is for a Process Piping and Mechanical Contractor to support prime contractors on projects located at the Port of Vancouver USA. The scope of work involves the installation of process interconnections and liquid handling equipment, specifically focusing on ductile iron and fusible HDPE piping, plug valves, slide gates, and submersible stormwater pumps. The contractor is responsible for delivering fully installed and pressure-tested systems, with a strict requirement for compliance with PPI guidelines regarding HDPE fusion. The solicitation was posted on October 15, 2026, with a response deadline of November 19, 2026. Classified under NAICS code 238220, this contract focuses on specialized mechanical installations within the port's infrastructure. Interested parties can find further details and submission guidelines through the Port of Vancouver USA procurement portal.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Concrete & Structural ContractorThis subcontract opportunity is for a Concrete and Structural Contractor to support prime contractors on projects for the Port of Vancouver USA. The scope of work involves the installation of both cast-in-place and precast concrete, specifically focusing on the construction of equipment pads and the installation of utility vaults, junction boxes, and precast sectional manholes. The contractor is responsible for delivering fully cured concrete pads and ensuring all structures are leak-tested. All work must adhere to strict industry standards, including hydrostatic leakage testing per ACI 350.1-10 and surface tolerance requirements per ACI 117. The solicitation was posted on October 15, 2026, with a response deadline of November 19, 2026.

Poured Concrete Foundation and Structure Contractors

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Civil Earthwork & Utility ContractorThis subcontract for Civil Earthwork and Utility services involves performing site preparation and utility installation for prime contractors on projects located at the Port of Vancouver USA. The scope of work includes potholing using air spades and vacuum excavators, excavation, trenching, and the installation of 1,500 linear feet of shoring. The contractor is responsible for delivering a fully excavated site with installed utility lines and properly backfilled trenches. The project requires strict compliance with Washington State Prevailing Wage standards. Interested parties must submit their responses by the deadline of November 19, 2026. This opportunity falls under NAICS code 237990 and is managed through the Port of Vancouver USA procurement system.

Other Heavy and Civil Engineering Construction

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Industrial Electrical ContractorThis subcontract opportunity is for an Industrial Electrical Contractor to provide installation and integration services for stormwater projects at the Port of Vancouver USA. The scope of work includes the installation of underground electrical systems, panelboards, electric motor drives, and signal cabling. Additionally, the contractor is responsible for conducting power system studies and field acceptance testing utilizing VFDs and 480V panelboards to deliver a fully energized electrical system. Qualified bidders must hold a licensed electrical contractor status and ensure all work complies with NEC, NEMA PB 1, and UL 67 standards. The solicitation was posted on October 15, 2026, with a response deadline of November 19, 2026. This project falls under NAICS code 238210.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Terminal 4 Pond Polishing System

Solicitation # 26-64

The Port of Vancouver USA is soliciting bids for project 26-64, the Terminal 4 Pond Polishing System, which involves retrofitting the existing T4 Pond stormwater treatment system. The scope of work includes installing a permanent aboveground polishing system featuring a lift station with two submersible pumps, a valve vault, a concrete equipment pad, and associated water conveyance piping. The project requires excavation, trenchless trenching, dewatering, and electrical improvements to ensure treated runoff meets ISGP requirements before discharging into the Columbia River. The engineer's estimate for the project is between 4,370,000 and 4,830,000 USD. Bids are due by November 19, 2026, at 2:00 PM, with a clarification deadline of November 5, 2026. The award will be based on the apparent low bidder, provided they meet responsibility criteria, including the completion of demonstrative projects in industrial or transportation facilities with operational constraints. Bidders must provide a bid deposit of 5 percent of the bid amount and comply with Washington State Prevailing Wage Rates for Clark County. Key requirements include the submission of an apprenticeship utilization plan, a proposal for incorporating recycled materials, and the provision of performance and payment bonds. Progress payments will be made within 30 days of approval, with a 5 percent retainage held from estimates.

Water and Sewer Line and Related Structures Construction

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Port Security Camera System Upgrade Project

Solicitation # 26-52

The Port Security Camera System Upgrade Project (Solicitation 26-52) involves the removal and replacement of 134 non-compliant security cameras and the removal of obsolete Wi-Fi equipment, cabling, and antennas at the Port of Vancouver, Washington. The scope is divided into grant-funded replacements for 106 cameras, non-grant replacements for 28 cameras, and the removal of obsolete equipment. The project has an engineer's estimate between $416,240 and $508,740, though a prior award amount of $348,915 is noted in administration data. All proposed equipment must be fully compatible with existing network and video management systems, meeting strict minimum requirements for cybersecurity, interoperability, and environmental protection. This project is partially funded by the Department of Homeland Security, necessitating compliance with federal regulations, including the Build America, Buy America Act and federal prevailing wage rates for Clark County and Southwest Washington. All personnel performing work must possess a Transportation Worker Identification Credential (TWIC). Bidders must submit sealed bids by 2:00 PM on November 19, 2026, including a 5% bid proposal deposit, a signed safety affidavit, and a list of mechanical subcontractors. The successful contractor will be required to provide performance and payment bonds and maintain comprehensive insurance coverage, including Washington State industrial insurance and employment security.

Security Systems Services (except Locksmiths)

POSTED

about 18 hours ago

DEADLINE

in about 1 month

On-Call Environmental Site Assessment Services

Solicitation # 26-18

The Port of Vancouver USA is seeking proposals for on-call environmental site assessment services to support various industrial development and capital projects. The selected firm or firms must possess the necessary qualifications and experience to provide technical support as well as Phase I and Phase II Environmental Site Assessments. This Request for Proposal, identified as bid number 26-18, is currently open for bidding. The deadline for clarifications is October 14, 2026, and final proposals are due by 5:00 PM on October 28, 2026. Jennifer Brower serves as the primary point of contact for this solicitation.

Environmental Consulting Services

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS