This Government Contract opportunity from Department Of The Interior was posted on March 15, 2007. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Z--Wildlife Handling Facility Ironwork

Awarded

I1540070019Federal

Submission Closed02/15/2007, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238120

New

SLED

Structural and Architectural MetalsThis subcontract for Structural and Architectural Metals involves the fabrication and installation of structural steel and decorative metal deterrents for facility projects at the University of Baltimore. The selected contractor will work under prime contractors to deliver steel framing and architectural metalwork, ensuring all installations comply with Division 05 and Division 05 70 30 standards. The opportunity was posted on October 28, 2026, with a response deadline of December 2, 2026. Classified under NAICS code 238120, the project focuses on essential metal infrastructure and specialized deterrents across the university campus in Maryland.

University of Baltimore

POSTED

DEADLINE

Structural Steel ErectionThis subcontract for structural steel erection involves the supply and installation of the structural steel frame for an athletic performance addition at the Mississippi Gulf Coast Community College in Perkinston, MS. The selected contractor will be responsible for the hoisting, bolting, and welding of all structural members in strict accordance with engineering specifications to deliver the completed structural skeleton of the facility. The project is categorized under NAICS code 238120 and is managed through MPTAP. Interested parties should note the tight turnaround for responses, with the solicitation posted on October 28, 2026, and the response deadline set for October 29, 2026.

POSTED

DEADLINE

Structural Steel & Metal FabricationsThis subcontract opportunity is for the supply and installation of structural steel and miscellaneous metal fabrications for City of Seattle Public Works projects. The selected contractor will work under prime contractors to fabricate and install structural supports specifically designed for roof-mounted or wall-mounted HVAC units in accordance with Division 05 standards. The project falls under NAICS code 238120 and requires the delivery of fully installed equipment supports. Interested parties must submit their responses by the deadline of November 18, 2026.

POSTED

DEADLINE

Provision of Structural Repairs and Planned Maintenance to Blackpool Tower Winter 2026/7 and Summer 2027

Solicitation # ocds-h6vhtk-078f6c

Blackpool Borough Council is seeking a qualified Remedial Works Supplier to provide structural repairs and planned maintenance for Blackpool Tower, with an estimated total value of 4,000,000 GBP including VAT. The project is divided into three phases: a Winter Works package from November 2026 to March 2027 during operational closure, a Summer Works package from April 2027 to November 2027 during the operating season, and ongoing ad-hoc maintenance beyond November 2027 based on annual surveys. The initial period of performance runs from November 30, 2026, to November 29, 2027, with a possible one-year extension to November 29, 2028. The contract is an open competition with award criteria weighted at 50 percent Quality, 40 percent Price, and 10 percent Social Value. Mandatory requirements include IRATA level 3 qualified supervisors, IRATA level 1 or 2 technicians, and project managers who are Chartered Members of the Institution of Civil Engineers or Institution of Structural Engineers. Suppliers must maintain insurance coverage of 10 million GBP for Employer's Liability and Public Liability, and 5 million GBP for Professional Indemnity. All work must adhere to strict technical and safety standards, including BS EN 1090 Execution Class 3 for steel structures, CDM 2015, and the Work at Height Regulations 2005. The deadline for tender submissions is November 20, 2026.

Blackpool Borough Council

POSTED

DEADLINE

Certified Welder / Steel Repair ContractorThis subcontract opportunity is for a Certified Welder or Steel Repair Contractor to perform specialized welding repairs for the Town of Hopkinton DPW tank projects. The selected contractor will work under prime contractors to remediate corrosion and metal loss on welded steel tank bodies and related components. The scope of work specifically requires the execution of pit and fill welding using AWS-certified methods to ensure all repaired surfaces are free of structural defects and corrosion pits. Strict adherence to safety regulations is mandatory, including OSHA standards for confined spaces and welding safety. Interested parties must submit their responses by November 18, 2026. This project falls under NAICS code 238120 and is focused on delivering high-quality structural remediation for municipal infrastructure in Massachusetts.

POSTED

DEADLINE

Structural Steel and MetalsThis subcontract for Structural Steel and Metals involves the fabrication and erection of a structural steel frame for a school addition project under the Henry County Board of Education in Georgia. The selected contractor will be responsible for installing essential components, including steel beams, columns, joists, and metal decking, to deliver a completed structural steel skeleton for the prime contractor. The opportunity was posted on October 28, 2026, with a response deadline of December 3, 2026. Classified under NAICS code 238120, this project focuses on specialized structural steel work to support the expansion of educational facilities within Henry County.

Henry County Board of Education

POSTED

DEADLINE

Marine Metal Fabrications & Mooring SystemsThis small business set-aside subcontract, titled Marine Metal Fabrications and Mooring Systems, involves the fabrication and installation of structural metal components for prime contractors working on USACE Detroit District marine projects. The scope of work specifically includes the delivery and installation of mooring bollards, bollard anchors, metal ladders, and grab rails. Due to the nature of the installation, the contractor must provide certified welding services and utilize heavy lifting equipment for the precise placement of bollards. Managed by the Department of Defense under the W072 Endist Detroit agency, the project falls under NAICS code 238120. The solicitation was posted on October 28, 2026, with a response deadline of December 1, 2026. Performance of the contract is centered in the 55802 zip code area, focusing on the delivery of critical mooring and safety hardware.

POSTED

DEADLINE

Metal and Wood Structural FramingThis subcontract opportunity involves the fabrication and installation of metal and wood structural elements for prime contractors working on United States Air Force facility projects at Wright-Patterson Air Force Base. The scope of work specifically covers cold-formed metal framing under Division 05 40 00 and rough carpentry and wood framing under Division 06 10 00, with a primary focus on delivering structural framing and interior wall supports. Managed by the Department of Defense under the AFLCMC PZIO agency, this project is designated as a total Small Business Set Aside under NAICS code 238120. The solicitation was posted on October 28, 2026, with a response deadline set for December 11, 2026. Performance of the contract will take place within the 45433 zip code area.

POSTED

DEADLINE

Shipboard Structural Steel Fabrication and RepairThis subcontract for Shipboard Structural Steel Fabrication and Repair involves performing structural repairs to the hull and internal stiffeners for prime contractors supporting the Navsup Flt Logistics Ctr Yokosuka. The scope of work includes the replacement of 30 square feet of deck plate and 2 square feet of bulkhead plate, with all welding and bonding required to meet MIL-STD-1689A(SH) and MIL-STD-1310H(NAVY) standards. The final deliverables consist of certified structural repairs and replaced steel plating. The project will be performed in Sasebo, Japan, under NAICS code 238120. Personnel assigned to this contract must undergo a NACI/T1 investigation to secure necessary base access. The solicitation was posted on October 28, 2026, with a response deadline of November 18, 2026.

Navsup Flt Logistics Ctr Yokosuka

POSTED

DEADLINE

Structural Metals and RailingsThis 8(a) set-aside subcontract, managed by Navfacsyscom Mid-Atlantic for the Department of Defense, involves the fabrication and installation of structural steel and metal railings at Building 592 in Philadelphia. The scope of work requires the delivery of installed structural steel frames and safety railings, utilizing carbon structural steel, zinc-coated pipe, and hot-dip galvanized coatings. All welding and installation must strictly adhere to AISC and AWS D1.1 standards. The opportunity is categorized under NAICS code 238120. Interested parties should note that the response deadline is December 1, 2026. The project focuses on providing high-quality metal components for prime contractors operating on USACE/NAVFAC facility projects.

Navfacsyscom Mid-Atlantic

POSTED

DEADLINE

Pre-Engineered Metal Buildings (PEMB) Fabrication & ErectionThis subcontract opportunity involves the fabrication and erection of pre-engineered long-span metal buildings for prime contractors supporting NAVFAC Mid-Atlantic projects. The scope of work specifically requires the installation of low-rise structures and structural columns for the GSE Warehouse and the MSU Compound at MCAS Cherry Point, with the final deliverable being the completed structural shells. The project falls under NAICS code 238120 and is associated with the Department of Defense. Interested parties should note that the response deadline is November 12, 2026, for work to be performed in Cherry Point, North Carolina.

Navfacsyscom Mid-Atlantic

POSTED

DEADLINE

Corpyard Phase II Connex Structural Anchoring & Welding: (Rebid)

Solicitation # 26-091-ITB

The City of West Sacramento has issued solicitation 26-091-ITB for the Corpyard Phase II project, which requires the structural anchoring and welding of 14 existing shipping containers to a cement-treated asphalt surface. The scope of work includes container pre-checks, drilling and hole cleaning, the installation of Bolthold asphalt substrate, bolting down ASTMA36 plates using epoxied steel rods, and performing AWS welding to secure the plates to the container framing. To prevent corrosion, the contractor must apply a zinc-rich cold galvanizing rust-inhibiting coating. All work must be performed by a licensed contractor holding a current California C-51 or C-60 license and must adhere to PSE stamped drawings, structural calculations, and standards including ASCE 7-22, CBC 2022, and AISC 360-16. Final acceptance is contingent upon a successful inspection by the City's Building department. The estimated project value is 35,000 dollars, and the contract will be awarded to the lowest responsive and responsible bidder. Bids must be submitted electronically via the OpenGov portal by November 10, 2026, at 1:00 pm, and must include a bid security of at least 10 percent of the total bid price. The successful bidder is required to provide performance and payment bonds equal to 100 percent of the contract price and must comply with California prevailing wage requirements and DIR registration. Additionally, the contractor must utilize the Virtual Project Manager system for submittals and maintain comprehensive insurance coverage, including Commercial General Liability and Workers Compensation. As a federal-aid construction project, the contract mandates strict adherence to FHWA-1273 provisions, including nondiscrimination and equal employment opportunity policies.

Capital Projects - Construction

POSTED

about 24 hours ago

DEADLINE

in 12 days

AI Contract Overview

The contract involves fabrication, modification, and installation of steel gates, catwalk supports, and catwalk railing at the South Unit of Theodore Roosevelt National Park near Dickinson, North Dakota, specifically at the Wildlife Handling Facility site. The scope includes producing eight steel gates of varying sizes, each equipped with hinges, latches, striker plates, sliding lock bars, and mounting clips for rough sawn planking supplied by the National Park Service (NPS). The gates require primer and two finishing coats of specified paint. Additionally, the contractor must fabricate 150 catwalk support brackets compatible with round or flat posts and install 1,500 linear feet of 1 1/2-inch OD pipe catwalk railing, coordinating closely with NPS staff during the installation. The project also entails fabricating a six-foot walkway extension with two steel access steps, using galvanized foot grating to match existing structures, and modifying an existing Linn Brand sorting tub by removing a notched section and replacing it with a flat metal wall incorporating a 24-inch access gate, ensuring structural integrity and safety during welding and fabrication. The contractor is responsible for maintaining a clean work site and adhering to safety requirements, particularly fire safety during welding. Facilities such as restrooms and 110-volt electricity are available, but no potable water or phone service is provided. Bidding requires a scheduled site visit and adherence to related federal regulations, including the Small Business Competitiveness Demonstration Program and the Davis-Bacon Act, with a project budget under $25,000. The solicitation is available exclusively online, with no paper copies distributed.

General Info

Fabricate and install steel gates, catwalk supports, railing, and walkway at Theodore Roosevelt National Park.

Agency

Department Of The Interior → Dsc Contracting Services Division

Contract Value

$34,237

NAICS

238120 - Structural Steel and Precast Concrete Contractors

Place of Performance

Set-Aside

NONE

Awardee

C-C WELDING,INC.,3160 COUNTY ROAD 170 ,WESTCLIFFE CO 812529650

Award Issued Date

02/15/2007, 12:00:00 AM UTC

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded

PostedFeb 1

Presolicitation

AwardedFeb 15

Contract was awarded

Submission Closed

02/15/2007, 12:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of The Interior → Dsc Contracting Services Division

ContactsNo contacts available

OfficeDenver, CO, 80225, USA

Organization / AgencyDepartment Of The Interior → Dsc Contracting Services Division

Office AddressDenver, CO, 80225, USA

ContactsNo contact information available

Full Description

Statement of Work Fabricate Steel Gates, Catwalk Supports & Construct and Install Catwalk Railing. Modify Existing Push Gate and Sorting Tub South Unit Wildlife Handling Facility Theodore Roosevelt National Park PMIS #77491 This project is located at the South Unit of Theodore Roosevelt National Park, 32 miles West of Dickinson, North Dakota. Delivery and work site will be at the Wildlife Handling Facility Site North two miles off the Fryburg Exit #36 from Interstate 94. Steel Gates: 6 each Steel Gates (Approximate size 145"w X 7' h) 1 each Steel Gate (Approximate size 69"w X 64"h) 1 each Steel Gate (Approximate size 75"w X 7'h) *Field Verify All Gate Sizes As Required* " For each gate provide two complete sets of hinges, one latch, one striker plate assembly, and one sliding lock bar and lock strike plate. All gate hinges will be fitted with grease fittings. All gate tubing will have one 3/16" weep hole drilled in each end for drainage. " Gates must provide mounting clips per drawing GA2 for installation of rough sawn planking. Mounting clips will accommodate rough sawn 2" x 8" boards instead of the drawing indicated 1" x 8"s . NPS will provide and install wood components. " Gates will be painted with one coat of universal primer followed by two coats of Sherwin Williams Bolt Brown (SW4001) or equivalent. " See included gate plan for details of construction. " The National Park Service will install new gates and related appurtenances. Total Gates Needed = 8 each Catwalk Support Brackets Approximate size = 6"w X 10"h mounting plate with 30" extension length to accommodate three walkway planks. Each fixture has approximately 24 ea 7/16" mounting holes pre-drilled. Must be mountable to round or flat posts. (NPS has existing template for the contractor to use) " The National Park Service will install new supports and the plank walkway. Total Support Brackets Needed = 150 each Catwalk Railing " Railing to match existing steel material. 1 1/2" OD pipe with a minimum of 1/8" wall thickness. Supports stemming from installed catwalk will be placed every 6'. " Contractor is responsible to install new on-site hand railings. Process will require coordination with NPS staff installing cat walk components. Total Catwalk Railing Length - 1500LF Push Gate Catwalk Extension (Round Pen) " 6'lf with two steel access steps. Walkway material is galvanized foot grating to match existing. Contractor will fabricate new walkway extension to work from existing walkway, fabricate two 24" wide steps, 36"h handrail and mount in place. Crowding Pen Modifications " Modify existing Linn Brand sorting tub to remove notched section and replace with straight, flat metal wall to match structures material and related strength requirements. Replaced section utilizes one 24" access gate which must be incorporated into new configuration. Section measures approximately 8' x 8'. The contractor shall exercise all care and concern during the process, to avoid any undue damage or change to the structures. All on-site welding will be done in a safe manner to avoid structural or prairie fires. All welding remnants and garbage shall be cleaned up daily & prior to final inspection of the work. Restroom facilities are available at the corral facility. Potable water & phone service is not available. 110 volt electricity is available for contractor's use as approved by Contracting Officer. Submittals required: None unless components differ from provided plans and existing physical templates available at the park. A contractor's site visit prior to bid submission is necessary and must be scheduled two days in advance. On-site inspections can be scheduled by contacting Chief of Maintenance Lynn Heiser @ +1 (555) 000-0000 ext. 3413 Award of this project will be in accordance with the Small Business Competitiveness Demonstration Program (Public Law 100-656). This project is subject to the Davis-Bacon Act. The magnitude of this project is less than $25,000. NAICS: 238190, P&S: Z299. This solicitation will be available ONLY on the Department of Interior (DOI) website at http://ideasec.nbc.gov. Bid package will be available O/A 02/14/07 and will close 03/07/07 at 02:00 pm MST., unless extensions are issued in an amendment. NO PAPER COPIES WILL BE MAILED.