Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CUMMINS INC.

UEI: KBCKZ16HT8T5

CUMMINS INC. is a federal contractor, registered under UEI KBCKZ16HT8T5. It has been awarded $3,166,421 across 523 federal contracts. Primary work spans Other Engine Equipment Manufacturing, Motor Vehicle Gasoline Engine and Engine Parts Manufacturing, and Motor Vehicle Electrical and Electronic Equipment Manufacturing. Top awarding agencies include Department Of Defense, Department Of Justice, and Department Of The Interior.

Contact Information

Registration and classification details

Registration

UEI Code

KBCKZ16HT8T5

Federal Contracting Overview

Award totals, agency breakdown, NAICS distribution, and geographic footprint.

Key Performance Metrics

Awards Count

0

All time

Active

0

Currently performing

Completed

0

Past period of performance

Total Awards

All time

Contracts

Prime · all time

Subcontracts

Sub · all time

Grants

Prime · all time

Subgrants

Sub · all time

Award Analytics & Distribution

Awards by Agency
Export
Department Of Defense$2.9M90.5%
Department Of Justice$188.3K6%
Department Of The Interior$48.1K1.5%
Department Of Defense (dod)$36.5K1.2%
Other agencies (2 agencies, <0.5% each)$29.5K0.9%
Awards by NAICS
Export
333618 - Other Engine Equipment Manufacturing$566.5K17.9%
336310 - Motor Vehicle Gasoline Engine and Engine Parts Manufacturing$443.0K14%
336320 - Motor Vehicle Electrical and Electronic Equipment Manufacturing$311.8K9.9%
811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance$184.0K5.8%
336390 - Other Motor Vehicle Parts Manufacturing$171.6K5.4%
339991 - Gasket, Packing, and Sealing Device Manufacturing$113.8K3.6%
332991 - Ball and Roller Bearing Manufacturing$102.9K3.3%
332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing$101.7K3.2%
336412 - Aircraft Engine and Engine Parts Manufacturing$86.4K2.7%
339999 - All Other Miscellaneous Manufacturing$82.5K2.6%
335312 - Motor and Generator Manufacturing$71.6K2.3%
334419 - Other Electronic Component Manufacturing$69.0K2.2%
326220 - Rubber and Plastics Hoses and Belting Manufacturing$68.1K2.2%
334412 - Bare Printed Circuit Board Manufacturing$57.1K1.8%
334418 - Printed Circuit Assembly (Electronic Assembly) Manufacturing$49.7K1.6%
333613 - Mechanical Power Transmission Equipment Manufacturing$47.4K1.5%
332999 - All Other Miscellaneous Fabricated Metal Product Manufacturing$44.1K1.4%
811118 - Other Automotive Mechanical and Electrical Repair and Maintenance$39.9K1.3%
332996 - Fabricated Pipe and Pipe Fitting Manufacturing$37.7K1.2%
541330 - Engineering Services$36.5K1.2%
334413 - Semiconductor and Related Device Manufacturing$32.9K1%
335932 - Noncurrent-Carrying Wiring Device Manufacturing$28.7K0.9%
333415 - Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing$27.9K0.9%
333316 - Photographic and Photocopying Equipment Manufacturing$21.6K0.7%
332112 - Nonferrous Forging$21.6K0.7%
332911 - Industrial Valve Manufacturing$19.1K0.6%
335999 - All Other Miscellaneous Electrical Equipment and Component Manufacturing$18.7K0.6%
334519 - Other Measuring and Controlling Device Manufacturing$17.8K0.6%
335313 - Switchgear and Switchboard Apparatus Manufacturing$17.0K0.5%
336411 - Aircraft Manufacturing$16.0K0.5%
326299 - All Other Rubber Product Manufacturing$16.0K0.5%
Others - Other NAICS codes (39 codes, <0.5% each)$243.8K7.7%
Awards by Agency Over Time
Export
Awards by Place of Performance

Open opportunities in CUMMINS INC.'s top NAICS codes and agencies

NAICS: 335999
New
DIBBS
Supply of Insulating Cover Blanket (NSN: 1660-01-472-5136)The contract calls for the supply of 306 new and unused insulating cover blankets identified by NSN 1660-01-472-5136, all of which must comply with military specifications to ensure functional integrity and safety. These blankets are critical components intended for operational use where thermal protection and reliability are non-negotiable, and the requirement emphasizes that no used, refurbished, or non-conforming items will be accepted. The solicitation is categorized as a subcontract under NAICS code 335999, indicating it falls within other electrical equipment and component manufacturing, and is managed by the ASC SUPPLIER OPER AE AND AF DIV within the Department of Defense. The opportunity was posted on August 5, 2026, with a firm response deadline of August 11, 2026, leaving a six-day window for qualified suppliers to submit proposals. While the place of performance and point of contact details are unspecified, the transaction is facilitated through the DIBBS system, and vendors must ensure full adherence to military standards and delivery timelines to meet contractual obligations.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 335999
New
DIBBS
Supply of Electronic Shielding Gaskets (NSN: 5999-01-506-4338)
LAND SUPPLIER OPERATIONS SMSG

POSTED

about 5 hours ago

DEADLINE

in 30 days
View Details
NAICS: 332991
New
DIBBS
BEARING, ROLLER, AIRFRAME
Solicitation # SPE4A6-26-R-XC13
The contract is for one roller bearing, airframe model DAS6-25C, identified by NSN 3110-00-143-3010, under solicitation SPE4A6-26-R-XC13. The item is classified as a critical application component and must be manufactured entirely in the United States, its outlying areas, or Canada, with over 50% of the total cost of all bearing components—rolling elements, retainer, inner race, and outer race—originating from these regions. A signed contractor’s declaration confirming the domestic origin of materials is required and must be submitted upon request; failure to provide this will disqualify the quote. The solicitation is subject to cancellation if no compliant offers are received, with potential reinstatement only after a formal waiver is approved. Pricing is firm fixed, with no variance allowed in quantity, and delivery is due 177 days after award. Inspection and acceptance occur at destination, with FOB terms also at destination. Packaging and preservation must follow MIL-STD-2073-1E, MIL-DTL-197M, and all DLA packaging requirements, including specific preservation methods determined by bearing type and closure, approved lubricants, and stringent quality verification controls. Marking must comply with MIL-STD-129 using special marking code ZZ-ZZ and no government identification may be removed from non-accepted supplies. Unit of issue is each, and no item unique identification is required per the service customer’s request. Measuring and test equipment must be calibrated and traceable, and documentation for source approval is governed by RC001. All technical and quality requirements referenced by R or I numbers are incorporated from the DLA Master List of Technical and Quality Requirements. The solicitation was issued on August 5, 2026, with responses due by August 19, 2026.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332991
New
DIBBS
ROLLER ASSEMBLY, CON
Solicitation # SPE8EF-26-Q-0165
The contract is for the procurement of 20 roller assemblies with NSN 1730-01-245-7322 under solicitation SPE8EF-26-Q-0165, with a 60-day delivery requirement from award. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the type of acquisition and applicable dates. Packaging must comply with DLA standards, and government identification must be removed from non-accepted supplies. The contractor must be certified at CMMC Level 2 by an approved third-party assessment organization and handle covered defense information in accordance with applicable regulations. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes must be verified at designated levels or AQLs. Technical data associated with this item is subject to export control under ITAR or EAR, requiring prior government authorization for disclosure or transfer, including to foreign nationals within the United States. Access to this controlled data is restricted to contractors with approved JCP certification, completed DOD training, and DLA authorization. The contract is issued by the Department of Defense, with Sharon Forde as the primary point of contact.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332911
New
DIBBS
DISK, VALVE
Solicitation # SPE7MC-26-T-168C
The contract specifies the procurement of a single disk valve, identified by NSN 4820012210266, to be delivered to the USS BOXER LHD 4 at FPO AP 96661 under FOB Destination terms with a 20-day delivery window from the order date. The item is subject to strict DLA packaging and marking requirements, mandating compliance with MIL-STD-2073-1E for preservation and packaging, and MIL-STD-129 for labeling and barcoding, with no special marking required. Packaging must use polyethylene film wrap, fiberboard unit and intermediate containers, and adhere to DLA’s RP001 packaging guidelines. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, with exceptions limited to functional uses in batteries, fluorescent lamps, sensors, controls, weapon systems, or specified chemical reagents; portable mercury-containing devices must include a secondary containment and comply with NAVSEA 5100-003D. Hazardous materials must be labeled in accordance with OSHA’s Hazard Communication Standard, and any radioactive content exceeding specified thresholds must be disclosed and marked. Acceptance and inspection occur at the delivery point under FAR 52.246-2, and payment must be processed electronically through WAWF using the Invoice & Receiving Report format. The solicitation requires offerors to certify their Small Business status, UEI, and compliance with various FAR/DFARS clauses, including those on trafficking in persons, employment eligibility, sustainable products, cybersecurity controls, and prohibitions on hexavalent chromium. Contractual obligations also include adherence to FAR 52.222-36 and 52.222-50 regarding equal opportunity and anti-trafficking, FAR 52.227-1 for authorization and consent, and FAR 52.232-40 for accelerated payments to small business subcontractors. The performance location is a naval vessel with no designated Contracting Officer’s Representative mentioned, and the solicitation does not include evaluation factors, options, or detailed technical specifications beyond compliance-driven requirements. The contract is tied to a procurement request number and historical pricing data, but the current unit price is not stated, and the solicitation anticipates an automated award process consistent with its simplified nature.
Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, HEXAGON
Solicitation # SPE4A6-26-R-XB62
The contract is for the procurement of 300 plain hexagon nuts, identified by NSN 5310-01-368-5549, under solicitation SPE4A6-26-R-XB62, with a firm fixed price and no tolerance for quantity variation. Delivery is required within 240 days after award, with inspection and acceptance occurring at the contractor’s origin facility. The item is classified as a Critical Safety Item and a Critical Application Item, necessitating strict adherence to quality, traceability, and documentation requirements. All suppliers must comply with SAE AS9100 higher-level quality standards, MIL-STD-1916 or equivalent zero-based sampling plans, and strict physical identification mandates per RQ017, including bare item marking with lot and serial numbers, contractor and manufacturer CAGE codes, and part number. Packaging must follow MIL-STD-2073-1E with preservation method 33, and marking of all unit packs must conform to MIL-STD-129, including 2D barcoding, and palletization must meet DLA’s RP001 requirements. No special marking is required beyond these standards. The contract includes a comprehensive set of FAR and DFARS clauses governing changes, subcontracting, labor practices, trafficking, termination, counterfeit part avoidance, electronic parts sourcing, transportation, and cybersecurity, with multiple deviations authorized under deviation 2026-00038. All waivers or deviations must be reviewed and approved by the DSC Contracting Officer. Pricing is not specified, but the total contract value is capped at $350,000 across the five-year indefinite delivery period. Payment is mandatory via WAWF, and offers must be submitted through DIBBS or by email, fax, or hard copy to the designated DLA point of contact by August 14, 2026. The award is based on a trade-off evaluation where past performance, particularly quality and delivery history captured through PPIRS-SR, is significantly more important than cost or other non-price factors. Offerors must be registered in SAM with valid UEI and CAGE codes, and while socioeconomic status is solicited, no affirmative responses are required to be completed within the solicitation itself. All technical and quality requirements are governed by the DLA Master List, and the contractor is responsible for ensuring full compliance from production through delivery, including flow-down of requirements to subcontractors
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332722
New
DIBBS
PLUG, MACHINE THREAD
Solicitation # SPE4A7-26-Q-0974
The contract pertains to the procurement of seven units of a machine thread plug with NSN 5365-00-854-2899, issued under solicitation number SPE4A7-26-Q-0974 by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within 182 days after contract award, and responses must be submitted by August 15, 2026. Technical data associated with this item is subject to strict export controls under either ITAR or EAR, meaning any disclosure to foreign persons—even within the United States—is prohibited without prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled information, and only contractors certified under the US/Canada Joint Certification Program, with completed DLA training and approved access, are permitted to receive the technical data. The primary point of contact for the solicitation is Mykhara Robinson, reachable via email at mykhara.robinson@dla.mil.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332996
New
DIBBS
ELBOW, PIPE TO TUBE
Solicitation # SPE7M3-26-T-7852
The contract is for the procurement of 169 units of an elbow fitting designed to connect pipe to tube, identified by NSN 4730-00-090-8665 and part number MS51813-3, manufactured in compliance with MIL-DTL-18866K and MS51813G specifications. The item must adhere to strict technical and quality standards as defined in the DLA Master List of Technical and Quality Requirements, with procurement governed by full and open competition. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by the specification. Delivery is required within 154 days from the contract award, with the product to be shipped FOB origin and subjected to inspection and acceptance at the destination. Packaging must follow MIL-STD-2073-1E and MIL-STD-129 guidelines, with no special marking required and palletization aligned with DLA packaging standards. The unit of issue is each, with a fixed quantity and zero variance allowed, priced at $169.00 per unit for a total contract value of $28,561. Delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of January 19, 2027, and an original delivery deadline of January 5, 2027. Transportation details follow DLA Procurement Notes C19 and C20, and all correspondence must reference the solicitation number SPE7M3-26-T-7852.
FLUID HANDLING DIVISION

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336390
New
DIBBS
COMPRESSOR, REFRIGERATI
Solicitation # SPE8E8-26-T-5010
This contract is for the procurement of one refrigeration compressor, identified by NSN 4130-01-578-8370 and purchase request 7017756959, with a total quantity of 19 units to be delivered in two line items—one unit and eighteen units respectively. All items must be delivered FOB origin within 137 days of the required delivery date of March 9, 2027, with zero variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must conform to ASTM D3951, subject to the overriding requirements of the DLA Master List of Technical and Quality Requirements. Packaging and labeling must comply with MIL-STD-129 and palletization must follow RP001 DLA Packaging Requirements. Mercury or mercury-containing compounds are strictly prohibited from direct contact with the hardware except for functional uses in batteries, fluorescent lamps, sensors, controls, weapon systems, or NAVSEA-specified reagents, with portable mercury-containing devices requiring shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Two delivery addresses are specified: one for Albany, Georgia, and another for Barstow, California, each with designated receiving points. Transportation procedures follow DLAD Proc Notes C19 and C20. The solicitation, issued under contract SPE8E8-26-T-5010, is a Service-Disabled Veteran-Owned Small Business Set-Aside with a response deadline of August 17, 2026, and is managed by the Department of Defense through the Albany Transportation Officer.
ALBANY TRANSPORTATION OFFICER

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
PLASTIC STRIP, PRESS
Solicitation # SPE8E5-26-T-3824
The contract specifies the procurement of 6 roll units of plastic strip with pressure-sensitive adhesive coating, identified by NSN 9330-01-580-6367 and referenced under solicitation SPE8E5-26-T-3824, issued by the Defense Logistics Agency. Each roll equals 36 yards, with a total quantity of 216 yards required, to be delivered FOB origin within 167 days from the contract award, with no variance allowed in quantity. Delivery must be made to DLA Distribution Warner Robins at Robins Air Force Base in Georgia, with inspection and acceptance occurring at the destination. Packaging must comply with DLA Packaging Requirements, MIL-STD-129 for marking and labeling, and either ASTM D3951 for non-hazardous material or TQ requirement IP025 if classified as hazardous under FED-STD-313, with DLA's Technical and Quality Requirements taking precedence over any other standard. The product must conform to approved specifications from 3M or Landsberg Kent H Co with specified part numbers. All packaging and palletization must adhere strictly to RP001 guidelines. The contract requires delivery by February 1, 2027, with an original required date of November 12, 2026, and transportation and shipping instructions are governed by DLA Procurement Notes C19 and C20. Point of contact for inquiries is Khue Nguyen of the Department of Defense.
WARNER ROBINS

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332722
New
DIBBS
COLLAR, PIN-RIVET
Solicitation # SPE4A6-26-T-12TU
The contract pertains to the procurement of 822 units of COLLAR, PIN-RIVET with NSN 5320-01-596-1012 and part number HL379-6, sourced from approved manufacturers including HOWMET GLOBAL FASTENING SYSTEMS INC and HI-SHEAR CORPORATION. Delivery is required FOB origin within 121 days, with no variance allowed in quantity, and inspection and acceptance must occur at the manufacturing origin in compliance with stringent quality standards. All items must adhere to MIL-STD-2073-1E packaging requirements and MIL-STD-129 marking standards, with no special marking codes applied. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and sampling must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated. Critical threads must be gaged per SAE AS8879 Category 1 or MIL-S-7742, excluding self-locking nuts and small-diameter threads. Documentation for source approval is mandated, and all supplies must meet tailored higher-level quality requirements. Item Unique Identification is not required per Service customer direction. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation logistics follow DLA procedural notes C19 and C20. The contract was solicited under SPE4A6-26-T-12TU with a response deadline of August 13, 2026, and a required ship date of December 13, 2026.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
CASE, PHOTOGRAPHIC E
Solicitation # SPE8EN-26-T-2849
The contract is for the procurement of 20 units of a photographic equipment case, identified by NSN 6760-01-491-2090 and vendor part number P/N 1450 from Pelican Products Inc. The item must be delivered within 20 days from the order date, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply strictly with ASTM D3951 while adhering to all higher-priority DLA Master List of Technical and Quality Requirements, including MIL-STD-129 labeling and RP001 palletization standards. The equipment does not involve ozone-depleting substances and must be shipped using the fastest traceable means, explicitly excluding parcel post. Shipping instructions designate a specific military freight address in Portsmouth, NH, with a RDD code of 777 and project identifier TP 2. The contract includes mandatory adherence to DLA’s technical and quality requirements referenced by R and I numbers, accessible via the official DLA website, and requires removal of government identification from non-accepted materials. The solicitation number is SPE8EN-26-T-2849, with a response deadline of August 17, 2026, and the issuing agency is the Department of Defense’s Construction & Equipment T & IFO EQ office, with Jennifer Esworthy listed as the primary point of contact.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
COMPRESSOR UNIT, REF
Solicitation # SPE8E9-26-T-3321
The contract is for the procurement of ten refrigerator compressor units identified by NSN 4130-01-090-9093 under solicitation SPE8E9-26-T-3321, issued as a total small business set-aside under NAICS code 333415. Delivery is required within 167 days of contract award, with a specific ship date of February 1, 2027, and an original required delivery date of October 30, 2027. Items must be shipped FOB origin with no variance allowed in quantity, inspected and accepted at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, requiring each unit to be individually encased in a wooden box and secured with plywood planks to prevent movement, with marking per MIL-STD-129 and no special marking codes. The delivery destination is DLA Distribution Puget Sound in Bremerton, Washington. Strict prohibitions apply regarding mercury or mercury-containing compounds, which must not be intentionally added or come into direct contact with any supplied hardware except for specific exemptions such as functional mercury in batteries, fluorescent lights, sensors, weapon systems, or chemical reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and equipped with a secondary containment barrier as mandated by NAVSEA 5100-003D. The contract incorporates all referenced technical and quality requirements from the DLA Master List, with compliance controlled by the revision in effect on the solicitation issue date. Transportation regulations are governed by DLAD Proc Notes C19 and C20, and the unit of issue is specified per DoD standards. The point of contact for inquiries is Matthew Kruc, with additional contract details accessible via the DIBBS system.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336390
New
DIBBS
BRAKE, SEGMENTED ROTOR
Solicitation # SPE7LX-26-U-9296
The contract solicitation SPE7LX-26-U-9296 seeks the procurement of 141 units of a segmented brake rotor, identified by NSN 2530-01-556-7156 and part number RDA-1550-951 from Meritor Heavy Vehicle Systems, LLC. This is a commercial item acquisition under a Total Small Business Set-Aside, with delivery required 145 days after award and FOB Origin terms applying, meaning the contractor bears all transportation costs and risks until the item reaches the designated destination. The contract specifies a guaranteed minimum quantity of 21 units and an estimated annual quantity of 141 units, with a maximum contract value of $350,000. Inspection and acceptance both occur at the destination, and items must be individually packaged per QUP=001 with packaging adhering to MIL-STD-2073-1E and DLA’s RP001 standards. All bare metal surfaces, moving parts, and threads must be protected using preservative code 89 to prevent corrosion, unless prohibited by operational incompatibility, difficulty of removal, or potential damage to the item. Packaging must include wrapping material GC to prevent abrasion and corrosion, and cushioning/dunnage material AD—such as solid fiberboard or rigid foam conforming to specified military and ASTM standards. Blocking and bracing must immobilize items within containers, with wood and plywood meeting strict ASTM and A-A-55057 specifications and engineered for easy removal. Marking must comply with MIL-STD-129, including barcoding and the special marking code ZZ specifying “ARROW UP OPEN THIS SIDE.” The contract incorporates extensive cybersecurity and compliance requirements, including DFARS 252.204-7012 for safeguarding covered defense information and cyber incident reporting, 252.204-7018 prohibiting acquisition of telecommunications equipment from designated foreign entities, and 252.223-7008 banning hexavalent chromium. Contractors must hold active UEI and CAGE codes, affirm small business status, and comply with whistleblower protections, former DoD official compensation rules, and hazardous material handling standards. Invoicing is mandatory through Wide Area WorkFlow, and payment acceleration is required for small business subcontractors. All technical and quality requirements are governed by the DLA Master List, with revisions effective
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 5 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L4-26-U-1055
The contract solicitation SPE7L4-26-U-1055 seeks 31 gaskets identified by NSN 5330-01-701-0239 under a Total Small Business Set-Aside, with a maximum contract value of $350,000 and a delivery deadline of 97 days after order placement. The item is classified as a commercial item and must be free of asbestos, with packaging strictly compliant with MIL-DTL-117, Type II, Class C, Style 1, using a medium-duty, waterproof, greaseproof, opaque bag for all Direct Vendor Delivery, Foreign Military Sales, and stock shipments, particularly due to UV sensitivity of FSC 5330/5331 components. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, including special marking code 32 for shelf-life items, and all units must be uniquely identified per MIL-STD-130N with UHF RFID or 2D Data Matrix barcoding. The contract includes strict compliance with safeguarding covered defense information under 252.204-7012 and NIST SP 800-171 requirements, with mandatory cyber incident reporting, and prohibits procurement of covered defense telecommunications equipment from restricted entities. Invoicing is required through WAWF, with payment subject to accelerated payments to small business subcontractors, and inspection and acceptance occur at the destination by the Government under the fixed-price inspection clause. The solicitation mandates full representation of small business status and UEI/CAGE codes, with additional disclosures required for hazardous materials under 29 CFR 1910.1200 and for any covered defense telecommunications products. All deliveries are restricted to the continental United States under FOB Origin terms, and offers are evaluated on price and other factors, not solely on lowest cost. Deviations from standard FAR clauses apply throughout, particularly under Deviation 2026-00038, affecting clauses related to contract type, payment, subcontracting, and cybersecurity, with additional compliance required for whistleblower rights, restrictions on forced arbitration, and prohibitions on hexavalent chromium and toxic materials.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 5 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334419
New
DIBBS
WIRING HARNESS, BRAN
Solicitation # SPE4A6-26-T-12UF
The contract pertains to the procurement of a single unit of a branched wiring harness identified by NSN 6150-00-394-4934 under solicitation SPE4A6-26-T-12UF, with a delivery requirement of 58 days after order. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, with applicable revisions determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA packaging standards, and any non-accepted supplies must have government identification removed. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, with attributes classified as critical, major, or minor corresponding to specific verification levels or AQLs. All technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons regardless of location, and requires prior authorization from the Department of State or Commerce. Only DLA contractors with approved US/Canada Joint Certification Program status, completed export control training, and DLA authorization may access such data. The contract is issued by the Department of Defense’s ASC Commodities Division with performance at New Cumberland, Pennsylvania, and all inquiries should be directed to the primary point of contact, Alliyah Richmond.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333415
New
DIBBS
COOLING COIL, AIR, DU
Solicitation # SPE8E9-26-T-3360
The contract specifies the procurement of two cooling coils, air, du, identified by NSN 4130015338172 and part numbers 1262-01-D REV A and 6W8-34-5608T, under solicitation SPE8E9-26-T-3360. The quantity is fixed at two units with no variance allowed, and delivery is required within 167 days of the contract award, with FOB origin terms and inspection and acceptance occurring at the destination. Packaging must strictly comply with MIL-STD-2073-1E, including specific preservation, packaging, and container specifications, and marking must adhere to MIL-STD-129 with no special marking required. All packaging and handling requirements are governed by DLA’s official packaging standards, and the shipment must be sent to the designated receiving warehouse in Tracy, California. The item is subject to all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, and defense information protections under RD003 may apply. The contract includes transportation guidelines referenced in DLAD Proc Notes C19 and C20, and the original required delivery date is May 18, 2027, with a need ship date of February 1, 2027. The NAICS code is 333415, and the responsible contracting office is under the Department of Defense’s Construction & Equipment MRO Service I, with primary point of contact Matthew Kruc.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332991
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A6-26-T-12VH
The contract pertains to the procurement of 161 units of a BUSHING,SLEEVE with NSN/Part Number 0001S00000052, under solicitation SPE4A6-26-T-12VH, issued by the Department of Defense’s ASC Commodities Division. Delivery is required within 403 days after contract award, and the place of performance is Robins AFB, Georgia. The solicitation closes on August 13, 2026, and is subject to technical and quality requirements referenced from the DLA Master List, with applicable revisions governed by the solicitation or award date depending on acquisition size. Packaging must comply with DLA specifications, and inspection and acceptance are to occur at the origin. Government identification must be removed from non-accepted supplies. Item Unique Identification is not required per customer request, and DFARS 252.211-7003(c)(1)(i) governs this exclusion. Technical data associated with this item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location, and DFARS 252.225-7048 applies. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program status, completion of required DLA training, and formal authorization. The contract is classified as a government first artic solicitation with no set-aside designation and falls under NAICS code 332991. Primary point of contact is Charleen Weber, reachable via email and phone as listed.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details