Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Pre-Solicitation opportunity from Department Of Defense was posted on July 23, 2003. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

A--GSTAMIDS FCS Draft RFP Release

Closed
DAAB15-03-R-0023Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

AI Contract Overview

Show more

The US Army Communications Electronics Command and Project Manager for Close Combat Systems are issuing a Draft RFP for the Ground Standoff Mine Detection System-Future Combat System System Development and Demonstration phase. This program aims to develop mine detection, lane and mine marking, and neutralization subsystems integrated onto the MULE unmanned ground vehicle platform. The selected contractor will be responsible for providing simulations, emulators, and prototypes to the Lead Systems Integrator, while offering ongoing technical and engineering expertise through system integration and Production Qualification Testing. The scope of work includes systems engineering, design, fabrication, and verification, with an additional option for an Airborne Cueing Sensor to be exercised in FY06 for low altitude mine detection. Interested firms must submit comments and questions via the Interactive Business Opportunity Page within thirty days of the draft release. The final RFP is expected to be issued around September 15, 2003, following the review of industry feedback.

General Info

US Army RFP for mine detection and neutralization systems on MULE unmanned vehicles.

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

Place of Performance

US Army Communications-Electronics Command, CECOM Acquisition Center Washington ATTN: AMSEL-AC-W, 2461 Eisenhower Avenue Alexa, VA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

Presolicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QK Acc-Apg Cont Ct Wash Ofc
ContactsNo contacts available
OfficeALEXANDRIA, VA, 22331-0700, USA
Office AddressALEXANDRIA, VA, 22331-0700, USA
ContactsNo contact information available

Full Description

Show more
NA The US Army Communications Electronics Command (CECOM) and Project Manager for Close Combat Systems (PM-CCS), Countermine Division, plan to issue a Draft RFP (DRFP) for the Ground Standoff Mine Detection System-Future Combat System (GSTAMIDS FCS) System De velopment and Demonstration (SD&D) phase. The DRFP consists of the following documents: SOW-GSTAMIDS FCS, Performance Specification for GSTAMIDS FCS, SOW-ACS, Performance Specification for ACS, Proposal Instructions and Evaluation Criteria. Additional d ocuments may be released as they become available. Release of this DRFP is for planning purposes only and is not to be construed as a commitment by the Government to procure any items/services, or for the Government to pay for any information received. G STAMIDS FCS is a FCS complementary program and is designed to provide mine detection, lane and mine marking, and neutralization subsystems configured on the MULE (Multi-Purpose Utility, Logistics And Equipment) countermine variant unmanned ground vehicle ( UGV) platform. The primary objective of this effort is to provide simulations, emulators, brassboard prototypes and environmentally tested engineering prototypes to the FCS Lead Systems Integrator (LSI) the platform systems integrator. After final protot ype delivery, the GSTAMIDS FCS contractor will provide technical and engineering expertise to the FCS LSI during the system integration and Government Production Qualification Testing (PQT). The effort encompasses the analysis, systems engineering and des ign, development, fabrication, assembly, test and verification, supportability engineering, technical and integration support, and management required to ensure successful performance of the responsibilities entailed in executing this program. The acquis ition also contains an option for an Airborne Cueing Sensor (ACS) to be exercised in FY06. The ACS is a low altitude mine detection sensor that will be mounted on an unmanned aerial platform, and is being developed to provide enhanced situational awarenes s by identifying Regions Of Interest (ROIs) in advance of the GSTAMIDS FCS. The DRFP is expected to be ready for release on or about 24 July 2003. A thirty-day time period subsequent to the issuance will be allowed for respondents to submit comments and questions regarding the content of the DRFP to the point of contact herein. The final RFP is expected to be released on or about 15 September 2003. Firms interested in submitting comments and questions regarding the content of the DRFP may send correspon dence via email to the Contracting Officer at contact@example.gov. Proprietary information submitted in response to the DRFP will be protected when clearly identified as proprietary. Response to the DRFP should be received no later than 30 days s ubsequent to the release of the DRFP. The DRFP will be issued on the Interactive Business Opportunity Page (IBOP), https://abop.monmouth.army.mil. No hard copies or copies via email will be available. Responses shall also be submitted via the IBOP. In o rder to use the IBOP a vendor must registered. New users can register by completing the following steps: 1) At the IBOP homepage select New User Registration under the User Services; 2) click on the Industry Button; 3) Select new user registration and co mplete all the required information and then click on the Submit Request button. To access the documents, once registered: 1) At the IBOP homepage select CECOM Comm.-Elec. Comm.-Active from the Army Solicitations, Login and View By Army Contracting Activit y drop down menu and click go; 2) Enter your User Name and Password 3) sort by Contracting Officer and then click on the folder ICON to the left of Melanson, Peggy; 4) Click on the folder ICON to the left of DAAB15-03-R-0023; 5) Once the draft RFP is post ed it will be at the line entitled Messages & Documents; GSTAMIDS FCS DRFP. Click on that title and proceed to the bottom of the page. The DRFP will be posted as an attachment. It is also recommended that each offeror join the solicitation specific mailing list under the RFP number DAAB15-02-R-0023. Once registered on the solicitation specific mailing list a vendor will receive email notification of any updat es relating to the RFP. Any questions regarding the submission of materials should be addressed to Ms. Peggy Melanson, Contracting Officer at contact@example.gov.

More opportunities from Department Of Defense → W6QK Acc-Apg Cont Ct Wash Ofc

Same awarding agency

NAICS: 335999
Federal
Power Distribution and Illumination Systems, Electrical (PDISE)
Solicitation # W909MY27RA001
The Department of the Army, through the Army Contracting Command-Aberdeen Proving Ground, has issued a Sources Sought and Request for Information for the build-to-print manufacture, assembly, and delivery of Power Distribution and Illumination Systems, Electrical (PDISE). These ruggedized, man-portable systems are designed to connect mobile power generation to mission equipment in harsh tactical environments. The potential requirement focuses on four specific configuration items: the M200 and M100 A/P Feeder Systems, the M40 A/P Distribution System, and the M46 Utility Assembly. All production must strictly adhere to Government Technical Data Packages and military standards, including MIL-DTL-53126 for general specifications, MIL-DTL-53072 for Chemical Agent Resistant Coating, and MIL-DTL-22992 for Class L connectors. The government is utilizing this market research phase to identify qualified large and small business sources under NAICS codes 335999 and 335313. Key areas of interest include industry production capacity, lead times for long-lead materials, and the ability to perform First Article Testing (FAT) within 360 days after contract award. Interested vendors must provide a detailed response by November 6, 2026, including corporate experience, technical capabilities, quality certifications such as ISO 9001:2015 or AS9100D, and Rough Order of Magnitude pricing for quantity ranges between 1 and 200 units. This information will be used to determine the final acquisition strategy and the feasibility of a small business set-aside.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

10 days ago

DEADLINE

in 8 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS