Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Abrasive Sweeping and Post-Work Cleanup

Active
International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled Abrasive Sweeping and Post-Work Cleanup requires the professional removal of abrasives and debris generated during decommissioning activities, to be performed exclusively between May 1 and May 15 during off-hours, specifically before 7 a.m. or after 5 p.m., to minimize disruption to daily operations. The work is scoped for locations in Quebec excluding the National Capital Region and is classified under NAICS code 561790, indicating it falls under other cleaning services. This is a subcontract opportunity issued by the Canadian Food Inspection Agency under the Government of Canada, with a response deadline of September 11, 2026, and the solicitation was posted on July 20, 2026. All cleanup activities must adhere to strict temporal constraints and likely require coordination with facility schedules to ensure compliance with timing requirements and safety protocols.

General Info

Abrasives cleanup between May 1–15, off-hours, Quebec only, by Sept 11, 2026, for Canadian Food Inspection Agency.

Agency

Government of Canada → Canadian Food Inspection AgencyView Agency

NAICS

561790 - Other Services to Buildings and DwellingsView NAICS

Place of Performance

Quebec (except NCR), CAN

Set-Aside

NONE

Documents

This scope was carved out of 2027-00047.

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Snow Removal - St. Hyacinthe Laboratory

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyGovernment of Canada → Canadian Food Inspection Agency
ContactsNo contacts available
OfficeN/A
Organization / Agency
Government of Canada → Canadian Food Inspection Agency
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Sweeping and removal of abrasives and debris from decommissioning activities, to be conducted between May 1–15 during off-hours (before 7 a.m. or after 5 p.m.).

Similar Contracts

Same NAICS industry code

NAICS: 561790
New
Power Washing Services
Solicitation # Power Washing
Management & Training Corporation (MTC) is soliciting bids for professional exterior power washing and cleaning services at the Earle C. Clements Job Corps Academy in Morganfield, Kentucky. The scope of work includes cleaning building exteriors, entranceways, and concrete areas, with a specific requirement for rust removal treatment at Building 603. The contractor is responsible for providing all labor, materials, cleaning solutions, and equipment. Final acceptance of the work is contingent upon a successful final walkthrough with an academy representative to ensure satisfactory cleaning and the removal of rust without damaging surfaces. This is a best-value subcontracting opportunity open to various small business categories, including SDB, WOSB, HUBZone, and SDVOSB. Bids must be submitted by 3:00 PM CST on September 10, 2026, and must include a lump sum bid sheet, proof of insurance, and a completed supplier packet containing a W-9 and self-certification form. The contract requires compliance with Service Contract Labor Standards and Davis- { { Bacon Act prevailing wages, as well as FAR regulations regarding small business utilization and debarment disclosures for subcontracts exceeding 30,000 dollars. Selected contractors must submit invoices on a weekly or bi-weekly basis and adhere to strict government and DOL guidelines for protecting sensitive information.
Earle C. Clements Job Corps Center

POSTED

about 4 hours ago

DEADLINE

in 6 days
View Details
NAICS: 561790
New
Federal
FY 26 SOS HVAC Duct Cleaning RFQ
Solicitation # FA330026Q0060
Solicitation FA330026Q0060 is a firm-fixed price request for quotes for comprehensive HVAC duct cleaning and decontamination services at Building 1403, Maxwell AFB, Alabama. This requirement is a 100 percent small business set-aside and encompasses approximately 146,000 square feet of facility space. The scope of work includes base facility cleaning with negative pressure air management, specialized logistics for the Polifka Auditorium involving rigging and scaffolding, the creation and patch-back of mechanical duct openings by certified technicians, and indoor air quality response using HEPA air scrubbers and EPA-registered antimicrobials. All services must adhere to NADCA ACR standards, and the contractor or subcontractor must hold an active ANSI/ICRC S520 certification for mold remediation. The contract is structured around four primary CLINs covering the facility cleaning, auditorium logistics, mechanical openings, and microbial response. Award will be granted to the lowest priced quote that is deemed technically acceptable, with the government reserving the right to award to a higher quote based on the completion date. To be technically acceptable, offerors must provide a written statement of compliance with the Statement of Work, specify lead times, and commit to completing the services within 90 calendar days of the award. Proposals must be submitted via email to the contracting office by 4:00 PM CDT on September 18, 2026, and must include a technical volume, a pricing volume, and required administrative data such as the UEI and CAGE code. The successful contractor must provide a minimum one-year warranty on all workmanship and utilize the Wide Area WorkFlow system for all invoicing and payment requests.
FA3300 42 Cons Cc

POSTED

1 day ago

DEADLINE

in 14 days
View Details

More opportunities from Government of Canada → Canadian Food Inspection Agency

Same awarding agency

NAICS: 518210
New
International
Computerised Maintenance Management System (CMMS) License and Services
Solicitation # 2026-00188
The Canadian Food Inspection Agency (CFIA) is soliciting proposals for a Software-as-a-Service (SaaS) Computerized Maintenance Management System (CMMS) to standardize the management of maintenance, inspection activities, facility assets, inventory, and compliance across its custodial laboratories nationwide. The scope of work includes the provision of software licenses, basic installation and configuration support, virtual user training for administrators and basic users, and ongoing technical support available Monday through Friday from 07:00 to 19:00 ET. An optional requirement for the extraction, conversion, and import of existing CFIA data is also included. The contract is structured for an initial one-year term with four subsequent one-year option periods. The selected contractor must comply with Government of Canada security policies, including the Directive on Security Management, ITSG-33 Cloud Security Risk Management, and the Security Assessment and Authorization onboarding process. Additionally, the solution must adhere to WCAG 2.1 Level AA accessibility standards. Performance is conducted remotely and virtually, with a 12-month software warranty period following acceptance. Payment will be made via direct deposit within 30 days of receiving a certified invoice. Proposals must be submitted by October 14, 2026, and will be evaluated based on mandatory technical criteria to ensure full compliance with the solicitation requirements.
Computing Infrastructure Providers, Data Processing, Web Hosting, and Related Services

POSTED

4 days ago

DEADLINE

in about 1 month
View Details
NAICS: 334510
International
Refrigerated Incubator Shaker Supply and DeliveryThe contract entails the supply, delivery, and technical compliance verification of a refrigerated incubator shaker designed to meet stringent performance, safety, and dimensional requirements for use within a federal laboratory operated by the Canadian Food Inspection Agency. The equipment must adhere to exacting specifications to ensure reliable operation in a controlled research environment, with verification processes confirming conformity to all technical and regulatory standards prior to acceptance. Delivery and installation are to be completed at a designated location in Manitoba, with full accountability for ensuring the device functions correctly under official laboratory conditions. This is a subcontract under the NAICS code 334510 for scientific and laboratory equipment manufacturing, with a response deadline of September 9, 2026, and a posting date of July 31, 2026. The solicitation is managed by the Government of Canada through its procurement platform, and while no set-aside status is specified, the procurement aligns with federal requirements for high-precision instrumentation. The place of performance is fixed in Manitoba, and all bidders must demonstrate capability to deliver, install, and validate compliance with the technical and safety parameters outlined in the solicitation material.
Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

about 1 month ago

DEADLINE

in 5 days
View Details