This Government Contract opportunity from Department Of Veterans Affairs was posted on July 17, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Adaptive Vehicle Supply – Ford Explorer Conversion

Closed

Federal

Submission Closed07/29/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # RFP-2026-0002

Sussex County EMS is seeking bids for the upfitting of eight 2026 Chevrolet Silverado 2500 pickup trucks with 6.5 inch beds to be used as EMS response vehicles. The awarded vendor is responsible for picking up the vehicles from the EMS Logistics Office in Georgetown, Delaware, performing the conversion, and delivering the completed vehicles back to the same location. All work must comply with the State of Delaware Motor Vehicle Code, Federal Motor Vehicle Safety Standards, and other applicable industry standards. Key deliverables include the provision of certified scale weight documents at delivery and a five year warranty covering labor and non wearing parts, including the electric HVAC. Proposals must be submitted in a sealed envelope to Kristen McAfee by 1:00 p.m. local time on October 2, 2026. The contract will be awarded to the lowest responsive and responsible bidder. Vendors must provide a certificate of insurance within twenty days of the award, including general liability, business auto liability, and transit cargo insurance. Vehicles must be completed and delivered within ninety days of receipt by the vendor, or a penalty of 100 dollars per day may be assessed. Final acceptance is contingent upon a satisfactory inspection by an authorized representative of the County.

POSTED

DEADLINE

CUSTOM MOBILE FIELD LABORATORY VAN BUILD

Solicitation # 140G0226Q0173

The Department of the Interior, through the USGS OAG Denver Acquisition Branch, is soliciting a firm fixed price contract for the custom build-out of a mobile field laboratory van to support the Colorado Water Science Center - Pueblo. This total small business set-aside requires the contractor to provide all non-personal commercial services, including labor, materials, equipment, and supervision, to deliver a fully operational mobile lab by March 31, 2027. The scope of work involves a comprehensive build-out featuring specific installations such as RV-standard sinks, CODT-standard flashing LED marker lights, and various electrical and water tank components as detailed in the technical exhibits. The final product must be delivered FOB Destination to the Colorado Water Science Center in Pueblo, Colorado. Award will be granted based on the lowest priced technically acceptable offer. To be considered technically acceptable, offerors must submit technical brochures and specifications proving that all proposed equipment meets the minimum required characteristics. All components must be authentic, manufacturer-certified, and delivered in original packaging, with a strict prohibition on gray market or counterfeit items. Payment will be processed electronically via the Invoice Processing Platform. The procurement is managed by Contracting Officer Jennifer Rollin, and final acceptance is contingent upon inspection by the Administrative Point of Contact to ensure the build meets all specified technical requirements.

Ofc Of Acquisition Grants-Denver

POSTED

DEADLINE

Vehicle Modification for a Person with Disabilities in Higganum, CT

Solicitation # 26BRS046

The State of Connecticut Bureau of Rehabilitation Services is requesting quotations for vehicle modifications to a 2017 Ford F250 Super Cab for a driver with a cervical spinal cord injury in Higganum, CT. Required modifications include a removable Adapt Link seat, a wheelchair lift, hand controls, a steering knob, a driver-side grab bar, a panoramic rearview mirror, and a chest strap with a D-ring closure. Bidders must be NMEDA/QAP certified in good standing, provide in-state service, and have the vehicle on hand to bid. All pricing must be submitted as F.O.B. Destination, including unit prices, amounts, and totals. Technical compliance is based on a Vehicle Evaluation Report from Easterseals Driver Assessment, and any equivalent substitutions must be explicitly explained. Safety is a critical requirement, including the installation of an airbag on/off switch or an NHTSA approval letter if airbags are eliminated. Final payment is contingent upon the vehicle passing a comprehensive inspection and test drive by a consulting automotive engineer to ensure safe highway operation. Bids must be submitted via email to Torrey Morse by September 25, 2026, at 4:00 PM.

POSTED

DEADLINE

MP Police Outfitting - Repair and Overhaul (R&O)

Solicitation # W8486-270799/A

The Department of National Defence (DND) is seeking a licensed contractor for the repair, overhaul, and outfitting of Military Police (MP) vehicles. The scope of work includes installing new policing equipment on approximately 35 new vehicles annually and decommissioning up to 35 vehicles annually by removing all police-related components and markings. The contractor must provide qualified on-site labor, materials, and secure storage facilities. The contract is for an initial term of three years with an option to extend for one additional year. A mandatory requirement for bid compliance is the maintenance of regional facilities in Western Canada (BC to Manitoba), Central Canada (Ontario and Quebec), and Eastern Canada (New Brunswick to Newfoundland). All equipment installed must be new, and the contractor is responsible for assuming all exchange rate and tariff risks throughout the contract period, as firm pricing is required. Award will be based on the lowest aggregate evaluated price among bidders who meet all mandatory technical criteria. The contractor must also maintain specific insurance coverages, including $2 million in commercial general liability and $250,000 in bailee's customer's goods insurance, and comply with ISO 9001:2015 quality management standards.

Department of National Defence

POSTED

DEADLINE

SOLICITATION_Corrosion Control_AIMD, GUAM

Solicitation # N6264926QH041

Solicitation N6264926QH041 is a request for quotes for vehicle and equipment corrosion control repairs, rustproofing, and prevention services to support the Commander, Fleet Air Western Pacific (CFWP) Aviation Intermediate Maintenance Detachment (AIMD) in Guam. The requirement is a total small business set-aside, specifically designated for Women-Owned Small Businesses (WOSB), under NAICS 811121. The contract is a Firm-Fixed-Price award with a period of performance from September 30, 2026, to September 30, 2028. Services will be performed at the contractor's facility, which must be located in Guam and possess specialized capabilities for C5-M marine environments. The scope includes the transport, washing, and repainting of various ground support equipment, such as compressors, carts, and trailers, across 13 specific line items. Technical requirements mandate adherence to NAVAIR 17-1-125, MIL-STD-7179B, and MIL-STD-171, with specific primer and topcoat standards including MIL-PRF-23236 and MIL-PRF-24635. Award selection is based on a Best Value Trade-Off process where technical capability and past performance are combined as more important than price. Eligible offerors must demonstrate a certified labor force (AMPP/NACE or SSPC), a documented safety history compliant with OSHA maritime and DoW hazardous materials standards, and valid Guam EPA permits for hazardous waste. Proposals must be submitted in two volumes: one for technical capability and past performance, and another for price and administrative documentation, sent via email to the designated contracting officials.

Navsup Flt Logistics Ctr Yokosuka

POSTED

DEADLINE

PWC Shawnee Truck Service Body

Solicitation # SRC0000041141

The Ohio Department of Natural Resources is seeking bids for the procurement and installation of a new Reading Classic II truck service body for Shawnee State Park. The service body must be installed on a 2021 GMC Sierra 2500 single cab long bed with a cab-to-axle measurement of 55.25 inches. Required specifications include a single-stage white paint finish, a recessed bumper to accommodate the factory hitch, and the use of spring retainers for the doors. Additionally, a spray liner is required for both the bumper and the cargo area. The contract will be awarded to the lowest responsive and responsible bidder, with preferences applied for Buy American and Buy Ohio certifications. The winning vendor must be located within 100 miles of Shawnee State Park and is responsible for picking up the vehicle and delivering the completed unit. The original factory truck bed will remain in the possession of the customer. All proposals must be submitted electronically through the Ohio Buys portal to be considered. The requested completion and delivery date is October 30, 2026, with the purchase order remaining valid for goods and services received through June 30, 2027. Invoices must be submitted directly to Financial Shared Services and include the identifier Origin-DNR-N08.

Dnr353315 Shawnee State Park Dnrsci

POSTED

DEADLINE

RFP DOS 2027-01 NHSP Law Enforcement Vehicle Upfitting

Solicitation # RFP DOS 2027-01

The New Hampshire Department of Safety is seeking a contractor for RFP DOS 2027-01 to provide comprehensive upfitting services for New Hampshire State Police vehicles. The scope of work includes painting, decaling, and the installation of all necessary equipment required to prepare these vehicles for active deployment. This solicitation was posted on September 9, 2026, with a response deadline of October 7, 2026. Interested parties should direct inquiries to the primary point of contact, Dianna Courtemanche, via the provided agency email or phone number.

POSTED

DEADLINE

Traffic Control Material Supplier

POSTED

DEADLINE

DDSP Refurbishment, Surface Preparation, and Painting of Six (6) Static Displays

Solicitation # SP330026Q0261

Solicitation SP330026Q0261 is a Request for Quotation to establish a Firm-Fixed Price purchase order for the repair, washing, preparation, and painting of six static display aircraft and military vehicles at the DLA Distribution Susquehanna facility in New Cumberland, Pennsylvania. The project requires the contractor to provide all labor, materials, and equipment to restore the displays to professional museum standards, including spot priming with rust converter and matching existing color patterns and insignias. The period of performance is 150 days after receipt of the order, with an estimated timeframe from October 5, 2026, to March 4, 2027. Award will be made on an all-or-none basis using the Lowest Technically Acceptable Price process. To pass the technical evaluation, offerors must provide proof of active SSPC QP 1 certification, evidence of three similar projects completed within the last three years, and personnel records demonstrating specific experience in historic metal journeyman work and vehicle or aircraft restoration. The contractor must also provide a performance bond and adhere to strict environmental and safety standards, including the proper labeling and disposal of hazardous waste per 40 CFR 262 and 49 CFR 172. Invoicing and payment will be processed through Wide Area WorkFlow.

POSTED

DEADLINE

Adaptive Driving Equipment Installation - Tesla Model Y

POSTED

DEADLINE

Vehicle Modification for a Person with Disabilities in Milford, CT

Solicitation # 26BRS044

The Connecticut Department of Administrative Services Procurement is seeking bids for vehicle modifications designed for a person with disabilities located in Milford, Connecticut. This solicitation, identified by number 26BRS044, is open for responses until September 23, 2026, at 8:00 PM. Interested parties should coordinate with the primary point of contact, Torrey Morse, regarding this project. Detailed information and the submission process are available through the CTSource Bid Board portal.

POSTED

DEADLINE

Vehicle Modification for a Person with Disabilities in New Britain, CT

Solicitation # 26BRS042

The State of Connecticut, through DAS Procurement, is soliciting bids for vehicle modifications designed to assist a person with disabilities in New Britain, Connecticut. This solicitation, identified by number 26BRS042, is open for responses until September 23, 2026, at 8:00 PM. Interested parties should direct inquiries to the primary point of contact, Torrey Morse, and can access further details and submission guidelines via the CTSource Bid Board portal. The project will be performed within the state of Connecticut.

DAS Procurement

POSTED

3 days ago

DEADLINE

in 12 days

AI Contract Overview

The contract requires the supply and delivery of a new 2026 or newer Ford Explorer vehicle equipped with a BraunAbility side-entry conversion and a power foldout XT ramp, designed to meet accessibility standards for individuals with mobility challenges. The vehicle must be delivered with a full original equipment manufacturer warranty, ensuring comprehensive coverage and reliability. The contract is structured as a subcontract under the Department of Veterans Affairs, specifically managed by the Network Contract Office 19, and is intended for performance in Aurora, Colorado, with a zip code of 80045. The North American Industry Classification System code 811121 confirms the scope relates to automotive mechanical and electrical repair and maintenance services, indicating the specialized nature of the vehicle conversion work. Submission of proposals is due by July 29, 2026, at 6:00 PM Eastern Time, with the solicitation posted on July 17, 2026. There is no set-aside classification specified, and the contract does not include details on the point of contact or specific funding mechanisms. The requirement emphasizes adherence to OEM standards and the integration of certified adaptive equipment, ensuring the vehicle is both a factory-new model and fully compliant with accessibility requirements for veteran use. No additional documentation or attachments are referenced in the provided data, leaving the bidder responsible for interpreting technical specifications based on industry standards for BraunAbility conversions and Ford Explorer specifications.