Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Calibration Services for Test & Measurement Equipment

Active

Federal

Response Deadline08/21/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the provision of calibration services for test, measurement, and diagnostic equipment utilized in production and inspection processes, with strict adherence to ANSI/NCSL Z540-3-2006 or ISO 10012:2003 standards, ensuring all calibrations maintain traceability to national measurement standards. Services must be performed with precision to support the integrity of equipment used in critical defense operations, and the contractor is expected to demonstrate proven capability in meeting these technical and quality requirements without deviation. The opportunity is designated as a subcontract under NAICS code 811212, with a response deadline of August 21, 2026, and the performance location is specified as Fort Bliss, Texas, with a ZIP code of 79916. The contracting activity is managed by the Department of Defense through the Defense Logistics Agency Aviation at Huntsville, though the specific point of contact information is not provided. The solicitation was posted on July 22, 2026, and is accessible via the SAM.gov portal for eligible subcontractors seeking to participate in the procurement process.

General Info

Calibration services for defense equipment at Fort Bliss, Texas, per ANSI/ISO standards, due August 21, 2026.

Agency

Department Of Defense → Al DLA Aviation At HuntsvilleView Agency

NAICS

811212 - Computer and Office Machine Repair and MaintenanceView NAICS

Place of Performance

Fort Bliss, TX, 79916, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 22

subcontract

Response DeadlineAug 21

Submission deadline

Response Deadline

08/21/2026, 09:00:00 PM UTCin 30 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Al DLA Aviation At Huntsville

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Al DLA Aviation At Huntsville

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide calibration services for test, measurement, and diagnostic equipment (TMDE) used in production and inspection, ensuring compliance with ANSI/NCSL Z540-3-2006 or ISO 10012:2003 and traceability to national standards.

Similar Contracts

Same NAICS industry code

Compliance Labeling and Marking ServicesThe contract requires full compliance with military and industry standards for labeling and marking at both the unit and shipment levels, specifically adhering to MIL-STD-129, IPC/JEDEC J-STD-609, and GS1-128 barcoding protocols. All items must be physically identified with accurate barcodes and include proper Pb-free labeling to meet environmental and regulatory requirements, with special attention given to the clear marking of bare items that lack packaging. The work must be executed with precision to ensure traceability, inventory control, and seamless integration into DoD logistics systems. This subcontract is issued by the ACTIVE DEVICES DIVISION under the Department of Defense, with performance required at Tracy, California, ZIP 95304-5000. The solicitation was posted on July 22, 2026, and responses are due by August 3, 2026. The NAICS code 811212 indicates the scope involves repair and maintenance services, suggesting the labeling and marking activities support the upkeep, refurbishment, or configuration of defense-related hardware. Contractors must meet all technical and procedural demands without deviation to ensure full acceptance and timely delivery within the specified timeframe.

ACTIVE DEVICES DIVISION

POSTED

about 15 hours ago

DEADLINE

Component Labeling and Marking ComplianceThe contract requires precision labeling and marking of capacitors to strictly comply with MIL-STD-129 and J-STD-609 standards, ensuring all components are accurately identified with required data elements including National Stock Numbers, electrostatic discharge warnings, lead-free indicators, and handling codes. Full traceability must be maintained through documented processes that link each labeled component to its production and supply chain history, guaranteeing compliance and accountability throughout the logistics chain. All labeling must be durable, legible, and meet military-grade specifications for environmental durability and readability under operational conditions. This is a small business set-aside subcontract under NAICS code 811212, issued by the Department of Defense through the Maritime Supply Chain office, with a response deadline of August 6, 2026. The solicitation is open exclusively to small businesses as defined by the Small Business Administration and is part of a broader effort to maintain stringent quality and compliance controls across defense electronic components. Participants must demonstrate proven capability in military labeling standards and supply chain traceability systems to be eligible for award.

MARITIME SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

Warranty and Repair Support ServicesThis contract provides post-installation warranty support, preventive maintenance, and rapid-response repair services for the NIRS system under a total small business set-aside, ensuring that only small business concerns are eligible to compete. The work is performance-based and requires the contractor to deliver timely and reliable technical support, with the primary place of performance located in Fargo, North Dakota, at the USDA Agricultural Research Service facility. Services must be structured to minimize system downtime and maintain operational integrity, emphasizing proactive maintenance protocols and immediate intervention for hardware or software failures. The solicitation, issued under NAICS code 811212 for industrial and commercial machinery and equipment repair and maintenance, is open for responses until July 31, 2026, with a posting date of July 22, 2026, and is structured as a subcontract under the Department of Agriculture’s oversight.

USDA Ars Afm Apd

POSTED

about 20 hours ago

DEADLINE

Agilent 6475 LC QQQ Instrument Maintenance and RepairThe contract seeks a qualified provider to deliver comprehensive maintenance, calibration, troubleshooting, and repair services for an Agilent 6475 LC QQQ mass spectrometer utilized in agricultural research at the USDA ARS AFM APD facility in Orono, Maine. Services must include the replacement of critical instrument components and rigorous performance validation to ensure operational integrity and data accuracy. The work requires specialized expertise in high-performance liquid chromatography-tandem mass spectrometry systems and must adhere to manufacturer specifications and industry standards for laboratory instrumentation. This is a small business set-aside subcontract under NAICS code 811212, open only to total small businesses as defined by the SBA. The opportunity was posted on July 22, 2026, with a response deadline of July 31, 2026. All work must be performed at the designated place of performance in Orono, Maine, and contractors must demonstrate the capability to support federal research operations with timely, reliable, and compliant instrumentation services. Participation is restricted to entities certified as small businesses under the SBA program, and no subcontracting opportunities are specified beyond the initial award.

USDA Ars Afm Apd

POSTED

about 20 hours ago

DEADLINE

Bar-Coding and Asset Labeling ServicesThe contract requires the application of bar-coded labels compliant with ISO/IEC-16388-2007 and MIL-STD-129R standards using Code 39 symbology for accurate tracking of military assets. These labels must be affixed to equipment and materials to ensure uniform identification and logistics traceability across Department of Homeland Security operations. The work is scoped as a subcontract under NAICS code 811212 and is targeted for performance at Curtis Bay, Maryland, with a zip code of 21226. The solicitation was posted on July 22, 2026, and responses are due by 2:00 PM Eastern Time on July 23, 2026, indicating a very short turnaround window. The contracting office is the Sflc Procurement Branch 1 under the Department of Homeland Security, and all labeling must adhere strictly to federal military standards to meet asset management and inventory requirements.

Sflc Procurement Branch 1(00080)

POSTED

about 20 hours ago

DEADLINE

in about 6 hours

Extended Service and Maintenance Contract for QX700 E SystemThe contract pertains to the extended service and maintenance of the QX700 E system, covering post-warranty support activities such as preventive maintenance, repairs, software updates, and technical assistance. This subcontract is being sought under the NAICS code 811212, indicating it relates to electronic equipment repair and maintenance services, and is issued by the National Institutes of Health through the Department of Health and Human Services. The solicitation was posted on July 22, 2026, with a response deadline of July 30, 2026, allowing interested parties a limited timeframe to submit proposals. The place of performance and specific office details are not provided, and no set-aside status is designated, meaning the contract is open to all qualified vendors regardless of business size or ownership characteristics. The work is expected to ensure the continued operational reliability and functionality of the QX700 E system beyond its initial warranty period.

National Institutes Of Health Olao

POSTED

about 20 hours ago

DEADLINE

Microscope Filament Installation and Labor ServicesThe contract entails the on-site installation of a new FEG filament in a Tecnai F20/D526 transmission electron microscope, with labor services capped at eight days to ensure proper setup and integration. The work must be performed at the designated facility in Bethesda, Maryland, with a focus on achieving full functionality of the microscope upon completion. Post-installation verification is required to confirm operational integrity and performance standards, ensuring the system meets all technical specifications. The contract is classified as a subcontract under NAICS code 811212 and is issued by the National Institutes of Health under the Department of Health and Human Services. Responses are due by August 1, 2026, and the opportunity was posted on July 22, 2026.

National Institutes Of Health Olao

POSTED

about 20 hours ago

DEADLINE

Warranty, Maintenance, and Technical Support ServicesThe contract entails providing comprehensive post-installation technical support, preventive maintenance, software updates, and repair services for the Daily QA 4 Pro Checker over a period of one to three years. The scope of work is centered on ensuring continued operational reliability and performance of the equipment through proactive and responsive service measures, including addressing technical issues, implementing necessary software improvements, and performing scheduled maintenance to prevent system downtime. All services must be delivered in alignment with industry best practices and the specific requirements of the hardware in question. This subcontract is issued under the NAICS code 811212 and is managed by the Department of Veterans Affairs through its 256-NETWORK Contract Office 16. The place of performance is identified as Jackson, Mississippi with a ZIP code of 39216, indicating that onsite support may be required in that location. The solicitation was posted on July 22, 2026, with a response deadline of July 30, 2026, and is available for review via the SAM.gov platform. While the contract does not specify a set-aside designation, it is structured as a subcontract and expects qualified vendors to deliver consistent, high-quality technical service throughout the agreement term.

256-NETWORK Contract Office 16 (36C256)

POSTED

about 20 hours ago

DEADLINE

RFID Cabinet and Moment-of-Care Station Hardware MaintenanceThe contract involves onsite and remote hardware maintenance services for 32 Wavemark RFID Smart Cabinets and 18 Moment-of-Care Stations, ensuring continuous operational readiness within the Department of Veterans Affairs facility infrastructure. Services include comprehensive diagnostics, repairs, firmware updates, and component replacements, all conducted securely within the VA’s firewall environment to maintain data integrity and compliance. The work must be performed either on-site at VA locations or remotely via secure connections, with responsiveness and minimal downtime prioritized to support critical care operations. This subcontract, posted on July 22, 2026, with a response deadline of July 24, 2026, falls under NAICS code 811212 for electronic and equipment repair services and is managed by the 261-NETWORK Contract Office 21. All maintenance activities must align with VA security protocols and operational requirements, and vendors must be prepared to deliver timely, reliable support without disrupting medical workflows. The contract does not specify a set-aside status or a designated place of performance beyond compliance with VA network restrictions, and inquiries must be directed through the official SAM.gov portal linked in the posting.

261-NETWORK Contract Office 21 (36C261)

POSTED

about 20 hours ago

DEADLINE

Optos Silverstone Imaging Device Repair and Troubleshooting (Unscheduled)The contract pertains to the repair and troubleshooting of Optos Silverstone imaging devices under unscheduled failure conditions, requiring immediate response to restore full imaging functionality. Services include remote diagnostics, on-site repairs, replacement using original equipment manufacturer parts, and comprehensive system recovery procedures to ensure operational continuity. All work must be performed at the designated place of performance in Lawton, Oklahoma, with a zip code of 73501, and is classified under NAICS code 811212 for medical and dental equipment repair and maintenance. The contract type is a subcontract, issued by the Indian Health Service under the U.S. Department of Health and Human Services, with a posted date of July 22, 2026, and a response deadline of July 29, 2026, at 9:30 PM Eastern Time. The scope demands rapid, high-quality service delivery to address unplanned outages and maintain critical imaging capabilities in healthcare settings.

Indian Health Service

POSTED

about 20 hours ago

DEADLINE

Optos Silverstone Imaging Device Preventative MaintenanceThe contract requires the performance of scheduled preventative maintenance on Optos Silverstone imaging devices at two locations: Lawton Indian Hospital and Anadarko Indian Clinic. The scope of work includes cleaning, calibration, system checks, and thorough documentation in strict accordance with the manufacturer's guidelines to ensure optimal device performance and regulatory compliance. All services must be completed reliably and on schedule to support continuous medical imaging operations at these facilities. This is a subcontract under the Indian Health Service, which operates under the Department of Health and Human Services, and is classified under NAICS code 811212 for medical and diagnostic equipment repair and maintenance. The solicitation was posted on July 22, 2026, with a response deadline of July 29, 2026, and the primary place of performance is Lawton, Oklahoma, with a zip code of 73501. The work is critical to maintaining the functionality of essential diagnostic equipment serving Tribal communities, and adherence to technical standards and documentation requirements is mandatory.

Indian Health Service

POSTED

about 20 hours ago

DEADLINE

Short- and Long-Term Technical SupportThe contract seeks responsive technical support services for system installation and ongoing operation, covering troubleshooting, software updates, repair coordination, and logistics to ensure sustained functionality. Services must be delivered both during and after installation phases, with a focus on timely and effective resolution of technical issues. The work is designated as a subcontract under NAICS code 811212 and is tied to the Department of Defense, specifically the Navsup FLC Sigonella Naples Office, with performance required in Chania, Greece, at ZIP code 73100. The solicitation was posted on July 22, 2026, and responses are due by July 24, 2026, indicating a narrow window for submission. There is no set-aside information provided, and no point of contact details are listed in the contract data.

Navsup Flc Sigonella Naples Office

POSTED

about 20 hours ago

DEADLINE

in about 21 hours

More opportunities from Department Of Defense → Al DLA Aviation At Huntsville

Same awarding agency

Military Packaging & Preservation ServicesThe contract requires comprehensive packaging and preservation services for defense electronic components in strict compliance with MIL-STD-2073-1 and MIL-STD-129 standards, ensuring long-term protection against environmental degradation. This includes vacuum sealing components, incorporating appropriate desiccants to control moisture, and using wood packaging materials that meet ISPM-15 international phytosanitary requirements to prevent pest spread during transit. The work is categorized as a subcontract under NAICS code 561910, with performance designated for Fort Bliss, Texas, at the 79916 zip code. The opportunity was posted on July 22, 2026, and responses must be submitted by August 21, 2026, by 9:00 PM Eastern Time. The contracting entity is the Department of Defense, specifically the DLA Aviation office based in Huntsville, though the physical work location is Fort Bliss.

Packaging and Labeling Services

POSTED

about 20 hours ago

DEADLINE

MIL-STD-130 Marking & Labeling ServicesThe contract requires the application of permanent identification markings to defense components in full compliance with MIL-STD-130 standards, specifically utilizing Unique Item Identification (UID) through direct part marking methods to ensure traceability and durability under operational conditions. All markings must meet the rigorous technical and durability requirements mandated by the Department of Defense to support asset management, logistics, and maintenance throughout the lifecycle of the equipment. Performance is required at Fort Bliss, Texas, with a response deadline of August 21, 2026, and the opportunity is structured as a subcontract under the NAICS code 332999 for Other Miscellaneous Fabricated Metal Product Manufacturing. The agency issuing the solicitation is the Defense Logistics Agency Aviation at Huntsville, operating under the broader authority of the Department of Defense. All work must adhere strictly to federal specifications without exception, and the contractor is expected to demonstrate proven capability in UID implementation, material compatibility, and documentation compliance for defense-grade components.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 20 hours ago

DEADLINE

Engineering Change Proposal (ECP) & Deviation ManagementThe contract requires the preparation and submission of Engineering Change Proposals, Requests for Deviation, and Requests for Variance to manage design or process modifications, including comprehensive documentation, technical justification, and coordination of approvals. This work is critical to ensuring compliance with technical specifications and maintaining operational readiness through controlled change management. All submissions must adhere to established procedures and support the integrity of engineering systems under the oversight of the Department of Defense. The performance location is Fort Bliss, Texas, with a zip code of 79916, and the work falls under NAICS code 541330 for engineering services. The opportunity is classified as a subcontract with no set-aside designation, and responses are due by August 21, 2026. The solicitation is issued by the Defense Logistics Agency Aviation at Huntsville, and while no specific point of contact is provided, all activities must align with DoD standards and timelines to ensure timely review and implementation of changes.

Engineering Services

POSTED

about 20 hours ago

DEADLINE

Lead-Free Control Plan (LFCP) Development & ComplianceThe contract requires the development and implementation of a Lead-Free Control Plan to ensure full compliance with environmental regulations and RoHS standards for defense electronics applications. This includes establishing robust processes for material traceability, validating manufacturing and assembly procedures to eliminate lead contamination, and maintaining comprehensive documentation to demonstrate adherence throughout the product lifecycle. The plan must be designed to meet the stringent requirements of defense systems, ensuring that all components and processes remain free from prohibited substances while maintaining performance and reliability. Performance of this work is centered at Fort Bliss, Texas, with a response deadline of August 21, 2026, and the contract is classified as a subcontract under NAICS code 541690. The contracting activity is managed by the Department of Defense through the DLA Aviation office at Huntsville, indicating the critical nature of this effort in supporting defense supply chain integrity. Success requires integration of quality control, supply chain oversight, and regulatory alignment to satisfy both technical and compliance obligations for use in military electronics systems.

Other Scientific and Technical Consulting Services

POSTED

about 20 hours ago

DEADLINE

Technical Data Package (TDP) DevelopmentThe contract requires the development and delivery of a complete Technical Data Package for defense electronic components, encompassing detailed engineering drawings, specifications, process flows, and all necessary approval documentation to ensure form, fit, function, and interchangeability with existing systems. This effort must meet exacting military standards and is intended to support sustainment, replacement, or upgrade activities within defense platforms managed by the Department of Defense. The work is being procured as a subcontract under the NAICS code 541330, indicating engineering services, and performance is obligated at Fort Bliss, Texas, with the delivery address specified as 79916. The solicitation was posted on July 22, 2026, and responses are due by August 21, 2026, at 9:00 PM Eastern Time. The contracting authority is the Defense Logistics Agency Aviation located at Huntsville, though the physical work site is Fort Bliss. There is no set-aside designation specified, meaning the opportunity is open to all eligible contractors. The contract does not include a designated point of contact in the provided data, and all submissions must be made through the official SAM.gov portal. Failure to meet the deadline or deliver a fully compliant TDP may result in rejection or contract termination.

Engineering Services

POSTED

about 20 hours ago

DEADLINE

First Article Testing & Reporting (FATR) ServicesThe contract requires the performance of comprehensive first article inspection and testing for defense electronics, ensuring 100% verification of all physical and functional characteristics, proper packaging, preservation standards, and full calibration traceability. The contractor must deliver a complete First Article Test Report (FATR) that documentation every aspect of compliance with technical and quality requirements, serving as formal validation that the product meets all specified defense standards prior to production rollout. Performance is mandated at Fort Bliss, Texas, with a response deadline of August 21, 2026, and falls under the NAICS code 334511 for electronic component and product manufacturing. This is a subcontract opportunity managed by the Department of Defense through the Defense Logistics Agency Aviation at Huntsville, with no set-aside classification indicated. All deliverables must adhere strictly to federal defense quality protocols and demonstrate full traceability and documentation integrity to support supply chain assurance for critical defense systems.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 20 hours ago

DEADLINE

CABLE ASSEMBLY,SPECThe contract pertains to a cable assembly specification under solicitation number SPRRA126Q0039, with a response deadline extended to August 5th, 2026, at 9:30 PM ET. All other terms and conditions of the original agreement remain unchanged. The procurement is designated as a Total Small Business Set-Aside under FAR 19.5, NAICS code 335311, and is managed by the Department of Defense through the Office of DLA Aviation at Redstone Arsenal, Alabama. The place of performance is Huntsville, Alabama, and the primary point of contact is Rashawn Knox, with Imelda Chagolla available as a secondary contact. The opportunity is publicly posted on SAM.gov, with full details accessible via the provided link, and the solicitation was posted on July 22nd, 2026.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 20 hours ago

DEADLINE

MOTOR, IMPELLER ASSEMBLYThe U.S. Government, through the Defense Logistics Agency Aviation at Huntsville, is seeking to award a single Firm Fixed Price, five-year Indefinite Delivery/Indefinite Quantity (IDIQ) contract for the procurement of the Motor, Impeller Assembly, identified by NSN 6105-01-599-6729 and part number 11463449-3, for use in the M-D6 weapon system. The contract will have a minimum guaranteed quantity of 35 units and a maximum of 175 units, with the first delivery order required to include the full minimum quantity, issued at or shortly after contract award. This acquisition is restricted exclusively to LeKtron, Inc., the sole responsible source with CAGE code 0SSP0, under FAR Part 6.103-1, as no other supplier can meet the technical and qualification requirements due to the lack of available government data rights or manufacturing knowledge to support alternative sources. The item falls under NAICS code 335312 and is subject to a small business size standard of 1,250 employees. Government-first-article testing is mandatory, requiring one sample to be submitted for destination inspection and acceptance within 195 days after contract award, with a 90-day government review window. Deliveries must be made FOB destination to Redstone Arsenal, Alabama. Offerors must meet strict prequalification criteria, including submission of detailed company information such as CAGE code, technical POC, and socio-economic status. Export control restrictions apply under the Arms Export Control Act and Export Administration Act, mandating that both the offeror and any manufacturing sources hold an active United States/Canada Joint Certification Program (JCP) registration to access controlled technical data; failure to comply will disqualify proposals without opportunity for extension or waiver. Proposals must be submitted by August 6, 2026, and any offer exceeding $10 million requires certified cost and pricing data per FAR Part 15. Communications must be directed exclusively via email to the designated contract specialists, and no phone inquiries will be accepted. Foreign firms must route requests through their respective embassies.

Motor and Generator Manufacturing

POSTED

about 20 hours ago

DEADLINE

HOLDER, ELECTRICAL CThis requirement is a limited-source procurement exclusively for Woodard Electronics, Inc. and Yulista Integrated Solutions, LLC, authorized under 10 U.S.C. 3204(a)(1) and FAR 6.103-1(b), due to the restricted number of qualified sources capable of fulfilling the agency’s needs. The contract seeks one unit for First Article Testing and two units for production of the Holder, Electrical C, identified by NSN 5998-01-528-1310 and manufacturer part number 13589406, with CAGE code 18876. The item is critical to the Patriot M-D6 weapon system and requires compliance with First Article Test procedures. Technical data associated with the item is subject to export restrictions under the Arms Export Control Act. Proposals must be submitted by 4:00 PM Central Standard Time on August 21, 2026, and the solicitation is issued under SPRAA2-26-Q-0037 by the Defense Logistics Agency Aviation at Redstone Arsenal, Alabama, with performance required at Fort Bliss, Texas. All responses must be directed to the primary point of contact, Rodney Haygood.

Bare Printed Circuit Board Manufacturing

POSTED

about 20 hours ago

DEADLINE

SPRRA126Q0025 // STARTER DRIVE, ASSEM // NSN 2840-01-461-9195This solicitation is a sole-source procurement issued to Honeywell Intl, Inc. for the acquisition of seven units of the Starter Drive, Assembly, Part Number 2-160-010-21, with National Stock Number 2840-01-461-9195. The procurement is managed under solicitation number AX6T6055AX and was posted on July 17, 2026, with a response deadline of August 18, 2026, at 7:30 PM Eastern Time. The contract falls under NAICS code 336412, which classifies it within the Aircraft Engine and Engine Parts Manufacturing sector. The issuing agency is the Defense Logistics Agency Aviation at Redstone Arsenal, Alabama, operating under the Department of Defense, with Richard Bulson designated as the primary point of contact for inquiries. The place of performance is listed as an unnamed location in Arizona, and the solicitation is accessible through the SAM.gov portal for further details.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

CWS Engineering Services/Contractor Logistics Support (Sole Source to Invariant Corporation)All communication regarding this solicitation must be directed via email to Scott Alexander at scott.alexander@dla.mil, with no telephone requests accepted. Requests must include the solicitation number SPRRA2-26-R-SP01 in the subject line, along with the requester’s full name, title, telephone number, email address, company name, address, and CAGE code. This acquisition is a sole-source procurement under FAR 6.302-1(a)(1) exclusively for Invariant Corporation, CAGE code 1T4T8, due to the unavailability of competitively obtainable technical data, inability to economically source alternatives, and the inability to create adequate specifications for open competition. The contract will be placed under the existing Indefinite Delivery Requirements Type Contract SPRRA2-24-D-0010 to support the Tactical Aviation and Ground Munitions Project Office by providing personnel, support, and services for the Containerized Weapon Support, CWS-Advance Precision Kill Weapon System, and Serenity programs. Only prequalified firms that can produce the specified items may respond, and foreign entities must route all inquiries through their respective embassies. The response deadline is August 1, 2026, though the solicitation date may shift, but will not close before this date. The NAICS code is 541715, and the contracting office is located at Redstone Arsenal, Alabama, under the Department of Defense.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

PANEL,CONTROL, ELECT - RFPThe request for proposal titled PANEL,CONTROL, ELECT - RFP with solicitation number SPRRA2-26-R-0086 was posted on July 17, 2026, and responses are due by August 17, 2026, at 9:00 PM Eastern Time. This solicitation is issued by the Department of Defense through the Defense Logistics Agency Aviation office located at Redstone Arsenal, Alabama, with no set-aside provisions applied, making it open to all eligible contractors. The NAICS code 334290 designates the procurement as related to other electronic component manufacturing, indicating the requirement is for control panels or electrical components supporting aviation systems. Performance of the contract is expected to occur at Redstone Arsenal, Alabama, and all inquiries should be directed to the primary point of contact, Cheyenne Wright, at cheyenne.wright@dla.mil, with Thomas Gunter as the secondary contact. Interested parties can access further details and submit proposals through the official SAM.gov portal linked in the solicitation.

Other Communications Equipment Manufacturing

POSTED

DEADLINE