Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Chiller System Installation and Commissioning

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the mechanical and electrical installation, integration, and commissioning of a temporary 200-ton chiller system at Portsmouth Naval Shipyard in Kittery, Maine, to support operational readiness for IPPT testing. The work includes all necessary coordination to ensure the chiller is properly connected to existing infrastructure, functionally tested, and fully commissioned to meet performance requirements under military operational conditions. The scope encompasses both the physical installation of equipment and the technical integration required to make the system fully operational and reliable during critical testing periods. This subcontract is classified under NAICS code 238220, indicating it falls under HVAC and refrigeration contracting services, and is managed by the Department of Defense through the Portsmouth Naval Shipyard. The place of performance is specifically identified as Kittery, Maine, with a zip code of 03904, confirming the location of the work. The contract was posted on May 19, 2026, and while no solicitation number or set-aside details are provided, the emphasis on timely installation and commissioning underscores the urgency and importance of maintaining shipyard operational capabilities through climate control support during testing cycles.

General Info

Temporary 200-ton chiller installed and commissioned at Portsmouth Naval Shipyard for IPPT testing in Kittery, Maine.

Agency

Department Of Defense → Portsmouth Naval Shipyard GfView Agency

NAICS

238220 - Plumbing, Heating, and Air-Conditioning ContractorsView NAICS

Place of Performance

Kittery, ME, 03904, USA

Set-Aside

NONE

Documents

This scope was carved out of N3904026P3155.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Chiller Rental

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedMay 19

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Portsmouth Naval Shipyard Gf

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Portsmouth Naval Shipyard Gf

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Mechanical and electrical installation, integration, and commissioning of the temporary 200-ton chiller at PNSY to ensure operational readiness for IPPT testing.

Similar Contracts

Same NAICS industry code

ICE 8A - Ft Benning Improvements

Solicitation # 70CMSW25R00000011

Solicitation 70CMSW25R00000011 is a firm-fixed-price task order issued under an 8(a) Multiple Award Construction Contract (MACC) for design-build services to support the Immigration and Customs Enforcement (ICE) Office of Firearms and Tactical Programs at Fort Benning, Georgia. The project, valued between 4.0 million and 4.5 million dollars, focuses on life, safety, and operational improvements. The scope of work includes the installation of two aluminum awnings at the shipping and receiving dock and Fiske Range Lane 2, turf replacement at Fiske Range, the demolition of Building 2294, gutter and drainage improvements for Building 234, commercial HVAC services and replacements, and general facility improvements for Building 301 and the DAGr Team facility. The period of performance is 365 days from the date of award. Award will be based solely on the lowest total evaluated price, provided the offeror demonstrates a sound technical approach, appropriate design resources, and a comprehensive quality control and safety program. The contract is subject to the Davis-Bacon Act, requiring prevailing wage rates and specific paid sick leave for workers. Performance and payment bonds are required per FAR 52.228-15. Proposals must be submitted in two volumes: a technical and safety volume and a pricing volume using the provided template. All payment requests must be processed electronically via the Invoice Processing Platform and accompanied by certified payroll.

Bristol Alliance of Companies

POSTED

about 11 hours ago

DEADLINE

PIDC Project 3 - Dorm RTU Replacement and SCADA

Solicitation # 872287

This firm-fixed-price task order, issued under an 8(a) MACC IDIQ, involves the replacement and upgrade of Rooftop HVAC Units (RTUs) for the Alpha, Bravo, Charlie, and Delta dorms, as well as a SCADA system upgrade at the Port Isabel Detention Center in Los Fresnos, Texas. The project objective is to replace corroded and obsolete equipment with high-quality, coastal weather-resistant, and durable systems that exceed commercial standards. The scope includes removing existing RTUs, replacing necessary piping, electrical, and ducting, and installing new SCADA software and two chemical feed pumps in compliance with Texas Commission of Environmental Quality standards. The estimated magnitude of the project is between 1.2 million and 1.5 million dollars, with a period of performance of 365 days from the date of award. Award will be based solely on the lowest total evaluated price, provided the offeror demonstrates a sound technical approach, appropriate design resources, and a comprehensive quality control and safety program. Key requirements include the submission of a Quality Control Plan, a safety plan, and the designation of a Project Manager with at least five years of relevant federal contracting experience. The contractor must also provide a one-year warranty for installation and craftsmanship and ensure all personnel pass required background checks for site access. Compliance with the Davis-Bacon Act and associated executive orders regarding wages and sick leave is mandatory. All payment requests must be submitted electronically via the Invoice Processing Platform and accompanied by certified payroll.

Bristol Alliance of Companies

POSTED

about 11 hours ago

DEADLINE

RFQ7593 Smoke Detector Installation

Solicitation # RFQ7593

Management & Training Corporation (MTC) is soliciting bids for a fee-for-service subcontracting opportunity to provide smoke detector installation and fire system services at the Sierra Nevada Job Corps Center in Reno, Nevada. The scope of work requires the replacement of 43 smoke detectors across specific dormitory rooms, including 12 detectors in rooms 11, 15, and 18, 12 detectors in room 19, and 19 detectors in rooms 20 and 21. The contractor must ensure all installed detectors communicate with the fire panel and that all work adheres to NFPA standards and local Authority Having Jurisdiction requirements. Bids must be submitted via email to Tom Williams by 3:00 PM PST on September 18, 2026. To be considered, applicants must provide a completed bid sheet, proof of insurance, and a supplier packet containing a W-9, self-certification form, and acceptance of terms and conditions. This opportunity is open to various small business set-asides, including SDB, WOSB, HUBZone, and Veteran-Owned businesses, under NAICS code 238220. Award decisions will be based on the best value as determined by MTC. The contract mandates compliance with Service Contract Labor Standards and Wage Determination No. 2015-5595 Revision 28 for labor rates in Washoe and Storey counties. Additionally, subcontractors must provide a 12-digit Unique Entity ID and certify their debarment status under FAR 52.209-6 if the subcontract exceeds 30,000 dollars. Strict adherence to government and Department of Labor guidance regarding the protection of sensitive and proprietary information is required.

Sierra Nevada Job Corps Center

POSTED

about 11 hours ago

DEADLINE

2026-Clearfield-Bldg E8 Welding HVAC

Solicitation # 2026- Clearfield- Welding Bldg. E8 HVAC Replacement

Management & Training Corporation is seeking fixed-price lump sum bids for a subcontracting opportunity to replace the HVAC system at Building E8 Welding within the Clearfield Job Corps Center in Clearfield, Utah. The scope of work includes the complete change-out of the existing motor, installation of wiring, conduit, disconnects, breakers, fuses, and starters, and the subsequent validation of voltage, phase, and grounding. Deliverables include startup and testing documentation, onsite training for maintenance personnel, and the provision of manufacturer O&M manuals. All work must adhere to OSHA requirements, federal, state, and local codes, and site safety procedures. Bids must be submitted via email to nelson.dar@jobcorps.org and patricia.willover@mtctrains.com by September 19, 2026, at 3:00 PM MST. To be considered for award based on overall best value, offerors must complete a physical site visit, provide a detailed bid breakout on company letterhead, and submit a bid bond guarantee. The project is a small business set-aside under NAICS 238220 and requires compliance with Davis-Bacon prevailing wage determinations for Davis County. Awardees must provide a UEI number, submit a Schedule of Values for invoicing via AIA G702/G703 forms, and provide original payment and performance bonds from a surety with at least an A- rating within five business days of an Intent to Award letter. Performance dates will be established upon the signing of a Notice to Proceed.

Management & Training Corporation

POSTED

about 11 hours ago

DEADLINE

CBP7664 Wellness HVAC Compressor Replacement

Solicitation # CBP7664

Management & Training Corporation is seeking bids for a subcontracting opportunity to replace a failed HVAC/refrigeration compressor at the Wellness facility of the Sierra Nevada Job Corps Center in Reno, Nevada. The project is structured in five phases: preparation and environmental safety, demolition and removal, installation of an OEM-specified compressor and related components, system testing and commissioning, and final closeout. The contractor must ensure full restoration of cooling capacity and operational efficiency while adhering to EPA Section 608 regulations for refrigerant recovery. The work must be completed within 30 consecutive business days following a written Notice to Proceed. Bids will be evaluated based on overall best value, considering price, quality, and delivery schedules. For bids equal to or greater than 25,000 dollars, a bid bond of 20 percent of the base bid is required, along with performance and payment bonds from an A-rated surety company. Submission requirements include a signed bid sheet, a detailed bid breakout, and verification of a physical site visit. Contractors must comply with Davis-Bacon Act wage determinations for Washoe County and provide self-certification of their business size and socioeconomic category per FAR 52.219-8. Final payment is contingent upon the submission of a Notice of Final Completion, certified payroll reports, and two sets of operation and maintenance manuals.

Sierra Nevada Job Corps Center

POSTED

about 11 hours ago

DEADLINE

Replace Shower Diverters in two (2) Dorms

Solicitation # replace-shower-diverters-two-2-dorms

This project involves the removal and replacement of shower diverters in eight bathrooms across two dormitories located in Indiana. The scope of work includes replacing existing Powers brand diverters with Delta or comparable models featuring readily available parts, as well as repairing or replacing any deteriorated piping leading into the diverters. The solicitation is open to various small business categories, including SDB, WOSB, HUBZone, and SDVOSB entities under NAICS code 238220. Proposals must be submitted via email to Tammy Swallows at Atterbury Job Corps by September 14, 2026, at 3:00 PM.

Adams & Associates

POSTED

about 11 hours ago

DEADLINE

This is a subcontracting opportunity to replace a chiller in McKinney, TX.

Solicitation # subcontracting-opportunity-replace-chiller-mckinney-tx

Serrato Corporation is seeking bids for a subcontracting opportunity to replace a failing air-cooled chiller at the North Texas Job Corps Center, specifically within Building 214/215 in McKinney, Texas. The scope of work includes the demolition and disposal of the existing chiller, the installation and startup of a new air-cooled chiller, and the integration of building automation controls using a JACE 9000 central integration point. Additionally, the contractor is responsible for installing three-way control valves at four air handling units, replacing VFDs, performing AHU cleaning and inspection, and ensuring all wiring is plenum-rated. Bids must be submitted by September 18, 2026, and quotes must remain valid for 90 days. Required submission documentation includes manufacturer equipment specifications, a Certificate of Liability Insurance naming Serrato Corporation as the holder, and Form 1413 for Davis-Bacon Act certified payroll compliance for work exceeding 2,000 dollars. Insurance requirements include a minimum of 500,000 dollars for Employers Liability and 1,000,000 dollars per occurrence for Commercial General Liability. The project is set aside for various small business categories, including SDB, WOSB, HUBZone, VOSB, and SDVOSB. Primary points of contact for this solicitation are Stacy Smith and Roy Henderson.

Serrato Corporation DBA North Texas Job Corps

POSTED

about 11 hours ago

DEADLINE

AAL-0880-02 HVAC and Electrical Upgrades Fairbanks

Solicitation # AAL-0880-02

Solicitation AAL-0880-02 is a presolicitation for HVAC and electrical upgrades at the Fairbanks FSS facility in Alaska, with an estimated construction magnitude between 250,000 and 500,000 dollars. The scope of work includes the replacement of the Fairbanks FSS chiller, four AC units, chilled-water piping, and all associated electrical systems. To maintain operations during construction, the contractor must provide temporary and redundant cooling and perform modifications to Panel P1 and various HVAC circuits. The project is scheduled for a proposed start date of April 15, 2027. Final deliverables include the completion of startup, testing, commissioning, and punch-list work, as well as providing FAA training and project closeout. This opportunity is set aside for small businesses, including SDB, WOSB, HUBZone, VOSB, SDVOSB, and Alaskan small businesses, under NAICS code 238220. Interested firms should contact Masanori Akers, the Parsons Subcontract Administrator, for further information.

PTSI Managed Services Inc.

POSTED

about 11 hours ago

DEADLINE

Main Building 1 Wing 5 – Six Rooftop HVAC Unit Replacement – Glenmont Job Corps Center

Solicitation # S26-010

The Glenmont Job Corps Center is soliciting proposals from qualified, New York State licensed contractors for the replacement and installation of HVAC equipment within Main Building No. 1, Wing 5 (Education Building) in Glenmont, New York. The project involves replacing two 7.5-ton split-system units for the auditorium, one 6-ton rooftop unit for the library and computer lab, and one 12.5-ton rooftop unit for the north and east wing classrooms. Additionally, the scope includes installing four 2-ton ductless mini-split heat pump systems, removing a window air-conditioning unit, and abandoning two 5-ton rooftop units in place. Comprehensive associated work encompasses demolition, roof curbs and penetrations, ductwork, refrigerant and condensate piping, electrical work, controls, structural roof evaluations, and fire alarm and duct smoke detector installations, concluding with testing, balancing, and commissioning. This solicitation is set aside for various small business categories, including SDB, WOSB, HUBZone, and Veteran-Owned Small Businesses. The project must be completed within 210 calendar days following the written Notice to Proceed, and the facility will remain operational throughout the construction period. Key deadlines include a pre-proposal site walkthrough on September 10, 2026, with vendor questions due by September 14, 2026. Final proposals must be submitted by September 21, 2026, at 4:00 PM ET. All work must comply with applicable New York State codes, safety regulations, and environmental requirements.

Adams and Associates, Inc.

POSTED

about 11 hours ago

DEADLINE

Replace HVAC Systems in the following buildings on our campus –1.) 1091 – Glazing/Welding/Heavy Mechanics Bldg

Solicitation # 26-140

This project involves the replacement of a pad-mounted gas-fired packaged HVAC unit at the Glazing, Welding, and Heavy Mechanics Building (1091) in Indiana. The existing 10-ton Carrier unit, which utilizes R-22 refrigerant, will be replaced with a new 12.5 SEER packaged unit using non-R22 refrigerants such as R-410A or R-454B. The scope of work requires the reuse of existing ductwork, electrical disconnects, and thermostat wiring. Following installation, the old unit and any recovered refrigerant must be labeled and left at the maintenance building for parts and reuse. The solicitation is managed by Adams and Associates, Inc., with a response deadline of October 5, 2026. This opportunity is set aside for various small business categories, including Small Disadvantaged, Women-Owned, HUBZone, and Veteran-Owned businesses. Interested parties should contact Tammy Swallows for further information regarding this NAICS 238220 project.

Adams & Associates, Inc.

POSTED

about 11 hours ago

DEADLINE

Replace HVAC Systems in the following buildings on our campus –1.) ABL Dormitory

Solicitation # 26-141

Adams & Associates, Inc., operating for the U.S. Department of Labor, is soliciting a single lump sum contract to replace HVAC systems at the ABL Dormitory within the Atterbury Job Corps Center in Indiana. The project involves replacing existing R-22 Bryant gas-fired furnaces and condensing units with new 12.5 SEER packaged units utilizing non-R22 refrigerants such as R-410A or R-454B. The scope includes the installation of compatible coils and the reuse of existing electrical disconnects, ductwork, and thermostat wiring. All recovered refrigerant must be labeled and left on-site. Eligible bidders must be registered in SAM.gov with a valid Unique Entity ID and hold a valid Indiana Contractor's License. A mandatory site visit is scheduled for September 23, 2026, with final proposals due by October 5, 2026. Award decisions will be based on best value, evaluating price (60 points), quality (20 points), past performance (10 points), and schedule (10 points). The contractor must provide a sequenced construction schedule within 10 days of the Notice to Proceed and guarantee all workmanship for one year. Payment terms are Net 30, contingent upon the submission of certified payroll records, a completed SF 1413, and the release of liens. Compliance with EPA, OSHA, and Davis-Bacon Act wage determinations is required.

Adams & Associates, Inc.

POSTED

about 11 hours ago

DEADLINE

AAL-0810-01 Sitka (SIT) Flight Service Station (FSS) Fire Esc

Solicitation # AAL-0810-01

Solicitation AAL-0810-01 is a design-build construction project for the Sitka Flight Service Station in Sitka, Alaska. The scope of work involves the design and construction of an access stair platform serving the third floor of the facility. Comprehensive requirements include conducting a site survey, obtaining necessary permits, developing the final design, executing construction, performing inspections, completing the punch-list, and providing final as-built drawings. The project has an estimated construction magnitude between 250,000 and 500,000 dollars, with a proposed start date of February 1, 2027. This presolicitation is open to various small business set-asides, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone, and Veteran-Owned Small Businesses. The effort is managed by PTSI Managed Services Inc. and falls under NAICS codes 238220 and 238190. Responses were due by September 25, 2026.

PTSI Managed Services Inc.

POSTED

about 11 hours ago

DEADLINE

More opportunities from Department Of Defense → Portsmouth Naval Shipyard Gf

Same awarding agency

Photographic Documentation and ReportingThe contract calls for the capture and delivery of high-resolution, timestamped, and geotagged photographic documentation to support installation, removal, and verification activities, ensuring precise visual records for compliance and operational reporting. All images must meet strict technical standards to enable accurate contextual analysis, with metadata embedded to verify location, timing, and task alignment. This work is critical for maintaining accountability and providing verifiable evidence of condition changes or procedural completion at the specified performance location in Kittery, Maine. This subcontract, classified under NAICS code 541922, is issued by the Portsmouth Naval Shipyard under the Department of Defense and is targeted to support defense-related maintenance and verification operations. The requirement emphasizes technical precision and reliability in visual documentation, with all deliverables expected to serve as legally defensible records. Performance is confined to the Kittery area with zip code 03904, and the contract was posted on August 6, 2026, indicating an upcoming procurement timeline for qualified vendors to respond and fulfill the photographic service obligations.

Commercial Photography

POSTED

about 1 month ago

DEADLINE

Removal and Restoration ServicesThe contract mandates the complete removal of all bus wraps upon termination, requiring thorough cleaning to eliminate any adhesive residue and full restoration of the vehicle surfaces to their original pre-wrap condition. This work must be performed to professional standards, ensuring no lasting damage or cosmetic impairment to the underlying paint or material. The service is classified under NAICS code 238990 for other construction specialties and is issued as a subcontract by the Portsmouth Naval Shipyard Gf under the Department of Defense, with performance required at the location in Kittery, Maine, zip code 03904. The solicitation was posted on August 6, 2026, and while no specific set-aside details or point of contact are provided, the scope emphasizes meticulous execution to return the buses to pristine condition without trace of the applied graphics.

All Other Specialty Trade Contractors

POSTED

about 1 month ago

DEADLINE

Environmental Compliance and Waste DisposalThe contract pertains to the safe handling and disposal of non-hazardous waste materials including vinyl scraps and backing paper, ensuring full compliance with Environmental Protection Agency regulations. The work is to be performed at the Portsmouth Naval Shipyard facility located in Kittery, Maine, with the NAICS code 562111 indicating a focus on solid waste collection and disposal services. This is a subcontract under the Department of Defense, specifically awarded by Portsmouth Naval Shipyard Gf, and was posted on August 6, 2026. The scope emphasizes environmental responsibility and regulatory adherence without classification as hazardous waste, requiring appropriate procedures for segregation, transport, and disposal in accordance with federal standards. The place of performance is clearly defined as Kittery, with a zip code of 03904, though no primary point of contact or set-aside details are provided.

Solid Waste Collection

POSTED

about 1 month ago

DEADLINE

Window Graphic Installation (70% VLT Compliant)The contract covers the installation of partial or full window graphics on vehicles or structures, with a strict requirement that all graphics maintain a minimum of 70% Visible Light Transmission to ensure safety and adherence to regulatory standards. This obligation is critical to preserving driver visibility and meeting legal mandates for optical transparency in windows. The work must be executed with precision to guarantee that graphics do not obstruct necessary sightlines or compromise compliance with vehicle safety codes. The contract is a subcontract under the Portsmouth Naval Shipyard Gf, part of the Department of Defense, with performance located in Kittery, Maine, at zip code 03904. It is classified under NAICS code 238990, which pertains to other specialized construction activities, indicating the work involves specialized application techniques rather than general construction. The solicitation was posted on August 6, 2026, and interested parties must adhere to the terms outlined in the associated SAM.gov listing to pursue performance of this task.

All Other Specialty Trade Contractors

POSTED

about 1 month ago

DEADLINE

Vinyl and Overlaminate Material SupplyThe contract entails the supply of pre-approved, high-durability vinyl wrap material alongside a protective overlaminate film designed to provide superior resistance against UV exposure, scratching, and fading. These materials are essential for long-term exterior applications requiring sustained visual clarity and structural integrity under harsh environmental conditions. The procurement is classified as a subcontract under NAICS code 424690 and is being managed by the Portsmouth Naval Shipyard Gf, a division within the Department of Defense, with performance location specified in Kittery, Maine, at ZIP code 03904. The materials must meet strict quality and performance benchmarks to ensure compatibility with military-grade asset finishing and refurbishment protocols. The solicitation was posted on August 6, 2026, and is exclusively for the provision of certified, ready-for-use wrap and overlaminate products, with no customization or installation services included.

Other Chemical and Allied Products Merchant Wholesalers

POSTED

about 1 month ago

DEADLINE

Bus Wrap Installation ServicesThe contract entails the physical installation of vinyl wrap graphics on a full transit-style bus, requiring comprehensive surface preparation, precise application techniques, and thorough quality inspection to ensure a durable, high-quality finish. The work must meet stringent standards for alignment, adhesion, and visual fidelity, with attention to detail critical for long-term performance under operational conditions. All tasks are to be performed in accordance with industry best practices and without damage to the underlying vehicle surface. This subcontract is awarded under NAICS code 238990 and is set to be performed at Kittery, Maine, with a zip code of 03904. The contract is associated with the Portsmouth Naval Shipyard Gf under the Department of Defense, indicating the work supports federal transportation or logistical needs. Although no solicitation number or point of contact is provided, the activity is publicly listed with a SAM.gov link, suggesting formal procurement tracking has been initiated. The project is scheduled to be initiated post the posted date of August 6, 2026.

All Other Specialty Trade Contractors

POSTED

about 1 month ago

DEADLINE

Vehicle Wrap Design and Artwork DevelopmentThe contract encompasses the design and development of custom advertising graphics and digital artwork for a full vehicle wrap to support a hiring campaign, specifically for a bus. The scope includes the creation of digital mockups to visualize the final design and the delivery of print-ready files compliant with industry standards for large-format printing. All artwork must be tailored to effectively communicate recruitment messaging while ensuring visual impact and brand consistency across the entire surface of the bus. The deliverables are expected to meet technical requirements for durability, color accuracy, and scalability to accommodate the unique dimensions of the vehicle wrap. This subcontract is tied to the Portsmouth Naval Shipyard Gf, operating under the Department of Defense, with performance centered in Kittery, Maine, zip code 03904. The effort falls under NAICS code 541430, which classifies it as graphic design services, indicating a specialized creative and technical engagement. The contract was posted on August 6, 2026, and is structured as a subcontract, suggesting it is part of a broader procurement effort. While no specific point of contact or set-aside details are provided, the emphasis remains on high-quality, mission-aligned visual communication to drive recruitment objectives through mobile advertising.

Graphic Design Services

POSTED

about 1 month ago

DEADLINE

Small Business Compliance and Representations SupportThe contract supports administrative functions necessary for maintaining compliance with Small Business Administration (SBA) set-aside requirements under a Total Small Business Set-Aside classification, as defined by FAR 19.5. The scope includes managing all documentation, representations, and certifications related to small business status, ensuring ongoing eligibility and regulatory adherence throughout the contract lifecycle. This work is critical for upholding the integrity of the set-aside program by accurately reporting and validating the business’s small business status and related federal compliance obligations. The contract is structured as a subcontract under the Portsmouth Naval Shipyard Gf, a Department of Defense entity, with performance based in Kittery, Maine, ZIP code 03904. The primary NAICS code is 541211, indicating that the services are aligned with accounting, tax preparation, bookkeeping, or payroll services, suggesting the administrative support may involve financial recordkeeping and reporting tied to small business certifications. The contract was posted on June 24, 2026, and is intended to facilitate federal contracting compliance through diligent record maintenance and representation verification.

Offices of Certified Public Accountants

POSTED

DEADLINE

Technical Data and Restricted Rights ManagementThis contract encompasses the creation, management, and secure delivery of technical data such as engineering drawings and inspection reports, subject to restricted government rights, ensuring strict compliance with federal data handling and dissemination protocols. The work is performed under a total small business set-aside, designated for SBA-qualified entities, and falls under NAICS code 541715 for scientific research and development services. Performance is required at the Kittery location with a zip code of 03904, aligning with the operational needs of the Portsmouth Naval Shipyard under the Department of Defense. The subcontract is structured to maintain confidentiality and control over sensitive technical information, with all deliverables governed by federal regulations that limit reproduction, disclosure, and use to authorized purposes only.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

Custom-Fabricated Machine Block for Ultrasonic Testing CalibrationA custom machine block is being fabricated to serve as a calibration standard for ultrasonic testing used in naval inspections, requiring precision machining to extremely tight tolerances and the application of proprietary manufacturing processes. The work is vital to ensuring the accuracy and reliability of non-destructive evaluation systems aboard naval vessels, with the final product directly supporting maintained operational readiness and safety standards in shipyard environments. This subcontract is a total small business set-aside under the SBA program, specifically classified under NAICS code 332999 for other fabricated metal product manufacturing, and is being procured by the Portsmouth Naval Shipyard under the Department of Defense. Performance of the contract is required at Kittery, Maine, with a posted date of June 24, 2026, indicating future award intent. The nature of the work demands specialized expertise in high-precision fabrication, and only eligible small businesses may bid, reinforcing the intent to foster industry capacity within the small business community for critical defense manufacturing needs.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Final Hydraulic Oil Fill OperationThe contract involves performing the final fill operation for submarine hydraulic oil storage tanks following a flushing process. The primary objective is to ensure the hydraulic oil tanks are filled to proper levels without any contamination, thereby guaranteeing system readiness and operational integrity. This task is critical for maintaining the performance and safety of submarine hydraulic systems. Issued by the Portsmouth Naval Shipyard under the Department of Defense, the subcontract is identified by the NAICS code 811411, which pertains to automotive repair and maintenance services, reflecting the technical maintenance nature of the work. The performance location is San Diego, with the ZIP code 92106. The contract was posted on June 15, 2026, and is publicly accessible through the Department of Defense’s procurement platform. This subcontract emphasizes precision, contamination control, and system reliability to support naval operations.

Home and Garden Equipment Repair and Maintenance

POSTED

DEADLINE

Oil Sampling and Laboratory CoordinationThis contract involves the collection of oil samples from submarine hydraulic systems and transfer hose tie-in points, with a key responsibility to coordinate with the Portsmouth Naval Shipyard (PNSY) chemistry laboratory for analysis and reporting. It is a subcontract under the NAICS code 541380, which pertains to testing laboratories, and is managed by the Department of Defense at Portsmouth Naval Shipyard. The place of performance is specified as San Diego, with the postal code 92106. The scope requires precise handling of oil sampling to ensure accurate laboratory testing, supporting the maintenance and operational readiness of submarine systems. Coordination with the PNSY chemistry laboratory is critical for timely and accurate analysis, ensuring data integrity and compliance with required standards. This contract, posted in mid-June 2026, is essential for supporting naval operations through effective hydraulic system monitoring and maintenance.

Testing Laboratories and Services

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS