DRYDOCK OF CGC TYBEE SOL# HSCG80-10-Q-P45H13

2/10/2010 SOLICITATION NO. HSCG80-10-Q-P45H13 DRYDOCK FOR CGC TYBEE PLEASE DOWNLOAD THE FOLLWING ATTACHED FILES: SOLICITATION SPECIFICATION SCHEDULE OF SUPPLIES/SERVICES QUOTES ARE DUE 4/16/2010 AT 4:00 P.M. EASTERN STANDARD TIME ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The United States Coast Guard Maintenance & Logistics Command, Atlantic intends to issue a Commercial Request for Quote (RFQ) for DryDock Repairs to the USCGC TYBEE, a 110-Foot Patrol Boat (WPB-1330). The Coast Guard intends to conduct the procurement in accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of Commercial Items, and FAR Subpart 13.5, Test Program for Certain Commercial Items. The Request for Quote (RFQ) and will be solicited as a Set-Aside for a HUBZone Business Concerns on or about 8 March 2010 and will be issued via the Federal Business Opportunity (FEDBIZOPS) web page at www.fbo.gov. Hard copies of the specification and solicitation will not be issued. It is incumbent upon contractors to monitor the FEDBIZOPS webpage for an RFQ release and all subsequent amendments. FEDBIZOPS also contains an option automatic notification service. The acquisition is for DRYDOCK repairs to the USCGC TYBEE (WPB-1330). There is a Geographic restriction of 540 Nautical Miles one way or 1080 Nautical Miles Round-trip for this dry-dock availability to a facility within the vessel's homepier at: 1 Little Harbor Road, Woods Hole, MA, details to follow in the solicitation. The performance period will be about FORTY-TWO (42) calendar days with a start date on or about 17 MAY 2010. The place of performance will be at the contractor's facility. The scope of the acquisition is for the overhauling, cleaning and repairing of various items aboard the USCGC TYBEE (WPB-1330). This work will include, but is not limited to: 1-O Perform Aluminum Hull and Structural Repairs - 1/4" Plate 4 SQFT 2-O Perform Aluminum Hull and Structural Repairs - 5/16" Plate 4 SQFT 3-O Perform Hull and Structural Plating Repairs - Overlay Welding (Aluminum) 6 SQIN 4-O Perform Hull and Structural Plating Repairs - Overlay Welding (Steel) 6 SQIN 5-O Perform Steel Hull and Structural Plating Repairs (5-Pound) 4 SQFT 6-O Perform Steel Hull and Structural Plating Repairs (6.0-Pound or 5.63-Pound) 4 SQFT 7-O Perform Steel Hull and Structural Plating Repairs (7.5-Pound or 7.65-Pound) 4 SQFT 8-O Perform Hull and Structural Plating Repairs -Corrugated Plate (4.0-Pound) 4 SQFT 9-O Perform Hull and Structural Plating Repairs - Eroded Weld (Aluminum) LIN FT 10-O Perform Hull and Structural Plating Repairs - Eroded Welds (Steel) LIN FT 11-O Perform Hull and Structural Plating Repairs - Crack (Steel) LIN FT 12-O Perform Hull and Structural Plating Repairs -Crack (Aluminum) LIN FT 13-O Perform Steel Structural Member Repairs -1" x 3" Steel T-Bar Framing 10 LIN 14-D Clean and Disinfect Potable Water Tanks 15-O Preserve and Disinfect Potable Water Tanks - 100% 16-D Clean and Inspect Fuel Service Tanks 17-D Clean and Inspect Fuel Stowage and Overflow Tanks 18-D Clean and Inspect Oil and Oily Waste Tanks 19-D Clean and Inspect Sewage Collection and Holding Tanks 20-D Clean and Inspect Grey Water Collection and Holding Tanks 21-D Clean Sewage Piping System 22-D Clean Grey Water Piping System 23-O Preserve Oil and Oily Water Tanks - 100% 24-O Preserve Oil and Oily Water Tanks - Partial 25-O Preserve Sewage Collection and Holding Tanks - 100% 26-O Preserve Sewage Collection and Holding Tanks - Partial 27-O Preserve Grey Water Collection and Holding Tanks - Partial 28-O Preserve Grey Water Collection and Holding Tanks - 100% 29-D Inspect MDE Exhaust System 30-D Overhaul Duplex Sea Strainers 31-D Renew Sea Valves 32-D Overhaul Stabilizing Fins 33-D Remove, Inspect, and Reinstall Propellers 34-D Remove, Inspect, and Reinstall Propeller Shafts 35-D Overhaul Mechanical Shaft Seal Assemblies 36-D Renew Water-Lubricated Propeller Shaft Bearings 37-D Remove, Inspect and Reinstall Rudder Assemblies 38-D Overhaul Steering Gear Components 39-O Clean and Inspect Heat Exchangers 40-D Modify Exhaust Hangers 41-O Repair Propeller Root Erosion 42-D Preserve Freeboard - 100% 43-D Preserve Underwater Body - "100%" 44-D Preserve Forward Peak Compartment 45-D Renew Speed Doppler and Overhaul Doppler Valve 46-O Renew Depth Indicating Transducer 47-D Inspect and Maintain Cathodic Protection System 48-D Renew Capastic Fairing 49-D Routine Drydocking 50-D Provide Temporary Logistics 51-D Fabricate and Install New Canopy 52-D Renew A/C and R/O Sea Chest Piping All welding and brazing shall be accomplished by trained welders who have been certified by the applicable regulatory code performance qualification procedures. Welding Certifications shall be submitted with the Contractors quote for this work. Drawings are now available on CD-ROM. The CD-ROM sets are available for all cutters and will be free of charge to contractors upon request. Surface Forces Logistics Center (SLFC) must have ten (10) days advance notice to complete a CD-ROM set of drawings. The CD-ROM(s) contain WINDOWS compliant raster/vector formats (e.g.*.DWF, etc). All responsible sources may submit an offer, which shall be considered by the United States Coast Guard. For information concerning this acquisition contact, the Contracting Official listed above. Quotes are due on or about 16 April 2010 at 4:00 p.m. Eastern Standard Time to: Surface Forces Logistics Center Attn: Nancy Brinkman (CPD/CP1/PBPL) 300 East Main Street, Suite 600 Norfolk, VA 23510-9102. Requests for Quotations and additional information may be submitted to Nancy Brinkman via fax +1 (555) 000-0000 or emailed to contact@example.gov