Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

Electric Motor and Pump Repair Services

Active
409f9124-c06a-48cc-8495-fa453f7fc5c1State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The state of New Hampshire, through Das Purchasing, is seeking solicitations for Electric Motor and Pump Repair Services. This procurement opportunity was posted on August 25, 2026, and requires all responses to be submitted by the deadline of September 18, 2026, at 3:00 PM. Interested parties should direct inquiries to the buyer, Jonah Rosa, who can be reached via email or phone. Further details and application instructions are available through the official New Hampshire procurement portal.

General Info

New Hampshire seeks electric motor and pump repair services by September 18, 2026.

Agency

New Hampshire → Das Purchasing (statewide Bids & Contracts)View Agency

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and MaintenanceView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(2)

bid_3153_27.pdf

PDF

attachment_1_bid_3153_27 offer sheet.xlsx

XLSX

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyNew Hampshire → Das Purchasing (statewide Bids & Contracts)
Contacts1 person available
OfficeN/A
Organization / Agency
New Hampshire → Das Purchasing (statewide Bids & Contracts)
View Agency Profile
Office AddressN/A
Contacts
Jonah RosaJonah Rosa
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
Contract: Electric Motor and Pump Repair Services

Similar Contracts

Same NAICS industry code

NAICS: 811310
New
1089 – Cafeteria freezer #1 & Cooler #4 Replacement
Solicitation # 1089-cafeteria-freezer-1-cooler-4-replacement
This contract involves the removal and replacement of cafeteria freezer number one and cooler number four due to significant frame and door damage and operational failures. Additionally, the project requires correcting the exit door of the main electrical room on the northwest side of the building to ensure compliance with NEC 2020 standards. This includes installing panic hardware and ensuring the door opens toward the egress to allow for quick exits during emergencies or arc flash events. The project is set aside for small businesses and other designated disadvantaged business categories. A mandatory site visit is scheduled for September 3, 2026, at 2:30 PM, and only vendors who attend this conference will be considered for the bid. All proposals must be submitted by September 11, 2026, at 3:00 PM. The work will be performed in Indiana under the management of Adams and Associates, Inc.
Adams & Associates, Inc.

POSTED

about 7 hours ago

DEADLINE

in 16 days
View Details
NAICS: 811310
New
Replace Ice-machine in café
Solicitation # 26-138
Adams and Associates, Inc., on behalf of the U.S. Department of Labor, is soliciting proposals for the removal and replacement of the existing ice maker at the Atterbury Job Corps Center cafeteria in Indiana. The current unit requires a new evaporator coil and extensive repairs to remain operational, necessitating a full replacement under Scope of Work ID 26-138. This solicitation is set aside for various small business categories, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, and Veteran Owned Small Businesses, falling under NAICS code 811310. A mandatory bid conference and site visit are scheduled for September 3, 2026, at 3:00 PM, and attendance is strictly required for any vendor wishing to be considered for the project. Final proposals must be submitted by September 11, 2026, at 3:00 PM. The selected vendor will be responsible for adhering to all specified construction requirements, codes, and wage determinations, with the project being managed by primary point of contact Tammy Swallows.
Adams & Associates, Inc.

POSTED

about 7 hours ago

DEADLINE

in 17 days
View Details
NAICS: 811310
New
Field Disassembly of a WWII Tank Hull at Twentynine Palms, CA
Solicitation # M0026426Q0134
Bastion Supply & Logistics, an SDVOSB small business, is seeking a subcontractor for the field mechanical disassembly of a WWII M4A3 Sherman tank hull located at MCAGCC Twentynine Palms in San Bernardino County, California. The scope of work involves the undercarriage removal and recovery of two track chains, four bogie truck assemblies, twelve road wheels with arms, two drive sprockets, one idler, four return rollers, a bulldozer mounting arm, and a belly plate. The project requires a specific oxy-acetylene torch cut on an engine deck door stop, which must be performed by a certified individual with five years of documented experience. The estimated duration of the work is three to five working days, with range availability confirmed between October 31 and December 7, 2026. The contractor is responsible for palletizing and steel-banding all components and must serve as the generator of record for lead-bearing waste and provide portable sanitation. All personnel must possess DBIDS base access, antiterrorism awareness, and complete mandatory briefings on range safety, desert survival, and desert tortoises. While Bastion provides a 35,000 lb forklift and a skid steer, the subcontractor must manage their own dunnage and temporary crane mats. This project is subject to the Service Contract Act and DOL Wage Determination 2015-5629, requiring certified payroll. Quotes must be submitted as firm not-to-exceed amounts rather than time and materials, with a submission deadline of September 3, 2026.
PURECJ HOLDING LLC dba Bastion Supply & Logistics

POSTED

about 7 hours ago

DEADLINE

in 5 days
View Details
NAICS: 811310
New
SLED
Repair and Maintenance of Equipment used for High-Volume Mycobacteria Growth, Detection and Susceptibility Testing at the Texas Department of State Health Services (DSHS) South Texas Laboratory
Solicitation # HHS0017743v2
The Texas Health and Human Services Commission is seeking competitive bids under solicitation HHS0017743v2 to establish contracts for the repair and maintenance of equipment used for high-volume mycobacteria growth, detection, and susceptibility testing. This procurement is specifically intended for the Texas Department of State Health Services South Texas Laboratory, though both the HHSC and DSHS agencies are entitled to utilize any resulting contracts. This solicitation is a repost of the original HHS0017743 request. Interested parties must submit their responses by the deadline of September 9, 2026, at 4:30 PM. The primary point of contact for this effort is David Martinez, and the performance of the services will take place within the state of Texas.
Department of State Health Services

POSTED

about 7 hours ago

DEADLINE

in 15 days
View Details
NAICS: 811310
New
SLED
Pit Drain Pans
Solicitation # RFQ RTAR_03957-1
The New Orleans Regional Transit Authority is seeking a qualified vendor under RFQ RTAR_03957-1 to perform repairs on pit drain pans at two separate locations. At the ENO location on Desire Parkway, the scope of work includes furnishing labor and materials to pull, clean, and inspect pump plungers, machining a new hanger and adjustment rod, and installing new gaskets and packing before a final test run. At the Canal Street location, the vendor is required to provide the labor and materials necessary to repair and install a pneumatic directional control valve followed by a test run. This unsealed bid process is currently open for submissions in USD, with a deadline of October 1, 2026, at 11:00 AM. Interested parties should coordinate with the primary point of contact, Leah LeBlanc, for further details. All completed work and materials are to be delivered to the specified facilities in New Orleans, Louisiana.
New Orleans Regional Transit Authority

POSTED

about 9 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 811310
New
SLED
Repair Leaking LP Valve Plate / Reinstall the Compressor
Solicitation # SRC0000035649
This solicitation, identified as SRC0000035649, is issued by the Alabama State Military Department under the Army MCA Real Property Operations and Maintenance division. The project focuses on the technical repair of a leaking LP valve plate and the subsequent reinstallation of the compressor. Performance of these services will take place within the state of Alabama. The opportunity was posted on August 25, 2026, with a response deadline of August 31, 2026. Interested parties should coordinate with the primary point of contact, Cassie Owens, and refer to the provided portal link for full submission details and the comprehensive scope of work.
Army MCA_App 01_Real Property Operations & Maintenance, State Military Department

POSTED

about 9 hours ago

DEADLINE

in 6 days
View Details
NAICS: 811310
New
Federal
GENERATOR MAINTENANCE AND INSPECTION SERVICES IN EMBASSY COMPOUND AND RESIDENCES - U.S. EMBASSY MAJURO, MARSHALL ISLANDS
Solicitation # 19RM2826Q0005
The U.S. Embassy in Majuro, Marshall Islands, intends to solicit bids for generator maintenance and inspection services for its compound and residences, with the solicitation expected to be released in mid- to late August 2026. The contract will be awarded on a firm-fixed-price basis, and the government may select an offer without engaging in discussions with respondents. All prospective contractors must be registered in the System for Award Management (SAM) database prior to submission, as required for any award exceeding $40,000, and registration must be completed well in advance of the response deadline. The North American Industry Classification System code for this opportunity is 811310, and there is no set-aside for small businesses or other categories. Responses must be submitted electronically via email to MartinezLC2@state.gov in MS-Word, MS-Excel, or PDF format, with individual files not exceeding 10MB; larger submissions must be split across multiple emails. The place of performance is Majuro, Marshall Islands, and the point of contact for inquiries is Luis Martinez or Mark T. Whitehead, reachable at 692-247-4011. The solicitation number is 19RM2826Q0005, and the posting date is July 22, 2026.
US Embassy Majuro

POSTED

about 11 hours ago

DEADLINE

in 16 days
View Details
NAICS: 811310
New
Federal
Microgrid Systems
Solicitation # W911KF-26-S-0022
The Anniston Army Depot is issuing a Request for Information to identify capable sources for the maintenance, repair, and emergency service of its entire microgrid system. The primary objective is to ensure the system maintains 24/7 operational capability. This is for planning purposes only and does not constitute a formal request for quote or a commitment to contract. Interested parties must submit a capability statement, recommended contracting strategy, and feedback regarding the adequacy of the hardware and software specifications by September 8, 2026. Submissions should include company administrative details and business type based on NAICS code 811310. All responses must be sent via email to the designated point of contact, Christopher R. Wells.
W6QK Acc Anad

POSTED

about 11 hours ago

DEADLINE

in 14 days
View Details
NAICS: 811310
New
Federal
FIRE PUMP REPAIRS
Solicitation # 31125260000995
The Department of Homeland Security, through Base Cape Cod, is seeking a contractor to rebuild one John Deere fire suppression pump engine, identified by serial/equipment ID RG6135L026381. The engine is located at building 3182 in Bourne, Massachusetts. Under this agreement, the U.S. Coast Guard will handle the removal and shipment of the engine to the contractor's facility, where the contractor is responsible for providing all necessary personnel, equipment, tools, materials, and supervision to complete the rebuild and perform required run tests. This combined solicitation, numbered 31125260000995, is designated as a total Small Business Set Aside under NAICS code 811310. The contract is subject to various Federal Acquisition Regulation clauses governing labor and safety, payment terms, inspection and acceptance, and security protocols. The place of performance is located in Buzzards Bay, Massachusetts, with the response deadline set for September 10, 2026.
Base Cape COD(00052)

POSTED

about 11 hours ago

DEADLINE

in 16 days
View Details
NAICS: 811310
New
Federal
Caesar Creek Lake Overhead Crane Wheel Bearing Repair and Replace
Solicitation # W912QR26QA098
This solicitation, numbered W912QR26QA098, requires a contractor to provide all labor, materials, and equipment to replace worn bearings in two movement wheels on the west side of the 10-ton overhead crane at the Caesar Creek Lake Control Tower in Waynesville, Ohio. The scope of work includes removing the wheels, resetting bearings per manufacturer specifications, reinstalling the components, and conducting a full functionality test. Additionally, the contractor must develop a critical lift plan and perform a crane load test in compliance with ASME B30.11, ensuring all operators are properly licensed. This procurement is 100 percent set aside for small businesses under NAICS code 811310, with a size standard of 12.5 million dollars. Interested parties must have an active registration in the System for Award Management database to be eligible. Quotes are due by 1:00 PM Eastern Time on September 8, 2026. The project is managed by the Department of Defense through the W072 Endist Louisville office.
W072 Endist Louisville

POSTED

about 11 hours ago

DEADLINE

in 14 days
View Details
NAICS: 811310
New
Federal
Calibration and Repair for the Hazardous Gas Detection System
Solicitation # N6852026Q1055
The Fleet Readiness Center under the Department of Defense is seeking a contractor to provide semi-annual on-site calibration and repair services for the Hazardous Gas Detection System. This combined contract, identified by solicitation number N6852026Q1055, is designated as a total Small Business Set Aside under NAICS code 811310. The work will be performed in Cherry Point, North Carolina, with the response deadline set for September 4, 2026. Primary coordination for this requirement is managed by Christine Butler and Jeffrey Smith.
Fleet Readiness Center

POSTED

about 11 hours ago

DEADLINE

in 10 days
View Details
NAICS: 811310
New
Federal
On-site SCBA Annual Flow Testing
Solicitation # M0068126Q0085
Marine Corps Installations West requires annual on-site flow testing for department-owned SCBA equipment to maintain compliance with NFPA, OSHA, and original equipment manufacturer standards. These services will be performed across multiple locations, including MCB Camp Pendleton, MCAS Miramar, MCLB Barstow, MCAGCC Twentynine Palms, and MCMWTC Bridgeport. Prospective quoters must strictly adhere to the guidelines in Section L and Section M and include the signed Technical Acceptability Checklist to avoid being deemed non-responsive. The solicitation, numbered M0068126Q0085, is managed by the Department of Defense with a response deadline of September 8, 2026.
Commanding General

POSTED

about 11 hours ago

DEADLINE

in 14 days
View Details

More opportunities from New Hampshire → Das Purchasing (statewide Bids & Contracts)

Same awarding agency

New
SLED
RACKS AND CARTS
Solicitation # f1aa3f2f-d644-47fd-a9f3-e7e6813176d7
This solicitation for Racks and Carts is issued by the New Hampshire state agency Das Purchasing for statewide bids and contracts. The opportunity was posted on August 25, 2026, with a response deadline set for September 7, 2026, at 2:00 PM. Interested parties can find further details through the official procurement portal. The primary point of contact for this requirement is Rhonda Girard, who serves as the buyer for the agency.

POSTED

about 9 hours ago

DEADLINE

in 13 days
View Details
New
SLED
ICE/WATER DISPENSER
Solicitation # 18-27
The New Hampshire Department of Administrative Services is seeking bids for a one-time purchase of two Follett Symphony Plus 12 CI Series countertop water dispensers with integrated Chewblet ice machines and SensorSafe technology. The required units must feature a daily production capacity of approximately 425 lbs of ice, 12 lbs of storage, and utilize environmentally responsible R290 refrigerant. Key technical requirements include NSF and UL listing, Agion silver-based antimicrobial protection, and a narrow 16.12 inch width. The award will be granted to the responsible vendor providing a conforming bid at the lowest total cost. Bids must be submitted via email to the Bureau of Purchase and Property, with a final closing date of August 31, 2026, at 10:30 AM Eastern Time. Successful vendors must be registered to conduct business in New Hampshire and complete delivery to the NH Hospital in Concord within 30 days of receiving a purchase order. Payment will be processed via ACH, and itemized invoices must be submitted to the designated DHHS contact. Contractors are expected to adhere to environmental standards by eliminating PVC or polystyrene and notifying the state of any mercury or PFAS content.

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 335220
New
SLED
Dishwasher
Solicitation # 17-27
The New Hampshire Department of Administrative Services, Division of Procurement and Support Services, has issued Request for Bid 17-27 for the supply of a High Temperature Ventless Pot, Pan, and Utensil Washer. The solicitation specifically seeks the Hobart PW20N-ADV-2 Advansys Electric model, which must feature a chamber capable of accepting 20 full-sized sheet pans or a 140-quart mixing bowl. Required technical specifications include timed wash cycles of 2, 4, and 6 minutes, an NSF pot and pan rating for all cycles, and water consumption of 2.35 gallons per cycle. All equipment provided must be new and of the current model year; used, rebuilt, refurbished, or demonstration equipment is strictly prohibited. The contract will be established as a non-exclusive purchase order, with the award granted to the vendor submitting a conforming bid that meets or exceeds all specifications at the lowest cost. Bids must be submitted via email to NH.Purchasing@DAS.NH.Gov no later than August 24, 2026, at 11:00 AM Eastern Time. Successful vendors must be registered to conduct business in New Hampshire and have a completed Vendor Application Package on file with the NH Bureau of Purchase and Property. Delivery is required within 30 days of purchase order receipt to the NH Hospital in Concord, NH, under FOB destination terms. Payment terms are set at 30 days following the later of service completion, delivery, inspection, acceptance, or invoice receipt. Additionally, vendors must provide Material Safety Data Sheets upon delivery in compliance with the Worker's Right to Know Act.
Major Household Appliance Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 541620
SLED
Environmental Compliance and SDS ManagementThis subcontract, titled Environmental Compliance and SDS Management, is issued by the New Hampshire Das Purchasing agency. The primary objective of the contract is the preparation and submission of Safety Data Sheets for all products in accordance with NH RSA 277-A, with a specific focus on the mandatory disclosure of PFAS and mercury. The solicitation was posted on August 17, 2026, with a response deadline of August 28, 2026. Classified under NAICS code 541620 for environmental consulting services, the project ensures state-wide compliance with environmental regulations through professional SDS management.
Environmental Consulting Services

POSTED

8 days ago

DEADLINE

in 3 days
View Details
NAICS: 484220
SLED
Delivery and Logistics ServicesThis subcontract for Delivery and Logistics Services, managed by Das Purchasing for the state of New Hampshire, involves the final delivery of tactical clothing to the NH Department of Safety Warehouse. The agreement is established under F.O.B. Destination terms, requiring all goods to be delivered within 90 days of the purchase order receipt. The solicitation was posted on August 17, 2026, with a response deadline of August 28, 2026. Classified under NAICS code 484220, the contract ensures the timely procurement and transport of essential tactical gear to the designated state facility.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

8 days ago

DEADLINE

in 3 days
View Details
NAICS: 315220
SLED
MultiCam Black Combat Pant SupplyThis subcontract opportunity, issued by the New Hampshire Das Purchasing agency, seeks the supply of new G4 Combat Pants in the MultiCam Black pattern. All delivered items must be provided across various sizes and strictly conform to the original manufacturer specifications as well as New Hampshire toxic substance regulations. The solicitation was posted on August 17, 2026, with a response deadline of August 28, 2026. This procurement falls under NAICS code 315220 and is managed through the statewide bids and contracts system for the state of New Hampshire.
Men’s and Boys’ Cut and Sew Apparel Manufacturing

POSTED

8 days ago

DEADLINE

in 3 days
View Details
NAICS: 315220
SLED
MultiCam Black Combat Shirt SupplyThis subcontract opportunity, managed by Das Purchasing for the state of New Hampshire, is for the supply of G4 Combat Shirts in the MultiCam Black pattern. The required items must be provided in new condition across various sizes and must strictly adhere to all manufacturer specifications as well as New Hampshire environmental and safety standards. The solicitation was posted on August 17, 2026, with a response deadline of August 28, 2026. This procurement falls under NAICS code 315220 and is being handled through the New Hampshire statewide bids and contracts system.
Men’s and Boys’ Cut and Sew Apparel Manufacturing

POSTED

8 days ago

DEADLINE

in 3 days
View Details
NAICS: 458110
SLED
Tactical Clothing
Solicitation # 26-27
The state of New Hampshire, through Das Purchasing, has issued a solicitation for tactical clothing. This procurement opportunity was posted on August 17, 2026, and requires responses to be submitted by the deadline of August 28, 2026, at 3:00 PM. Interested parties can find further details and submit their bids via the official procurement portal. The primary point of contact for this solicitation is Jonah Rosa, who serves as the buyer for the agency.
Clothing and Clothing Accessories Retailers

POSTED

8 days ago

DEADLINE

in 3 days
View Details
NAICS: 441110
SLED
2027 MODEL YEAR VEHICLES STATEWIDE
Solicitation # 3146-27
The New Hampshire Department of Administrative Services, Division of Procurement and Support Services, is soliciting bids for Statewide Contract 3146-27 to establish a contract for the supply and delivery of 2027 model year vehicles. The scope includes a wide range of vehicles, such as large sedans, cargo vans, small pickup trucks, and specialized police and enforcement vehicles, all of which must meet specific standard features and minimum specifications. Awards will be granted to vendors providing the lowest cost per line item and by manufacturer, with the state intending to award up to two manufacturers per line. Preference is given to vehicles meeting the State Clean Fleet Policy fuel economy requirements, though those that do not may be considered as best alternatives. The contract period begins October 1, 2026, and runs through September 30, 2028, with a possible two-year extension. Vendors must be registered with the NH Bureau of Purchase and Property and in good standing with the NH Secretary of State. Key requirements include maintaining comprehensive general liability insurance of at least $1,000,000 per occurrence and $2,000,000 aggregate, as well as providing a dedicated account representative. Payments are processed via ACH or P-card within 30 days of delivery and acceptance. Vendors are required to submit quarterly and annual usage reports and provide credits for any manufacturer discounts or rebates. All bids must be submitted electronically to the Bureau of Purchase and Property by September 2, 2026, at 11:00 AM Eastern Time.
New Car Dealers

POSTED

13 days ago

DEADLINE

in 8 days
View Details
NAICS: 541620
SLED
Environmental Compliance & Safety DocumentationThis subcontract, titled Environmental Compliance and Safety Documentation, is issued by the New Hampshire Das Purchasing agency. The agreement focuses on the provision of Safety Data Sheets and strict adherence to New Hampshire environmental standards. Specifically, the contractor must ensure that all materials are free from PVC, PFAS, and mercury, while maintaining compliance with FTC Green Marketing Guidelines. The solicitation was posted on August 12, 2026, with a response deadline of August 26, 2026. Classified under NAICS code 541620, the contract emphasizes regulatory safety and environmental sustainability for statewide operations within New Hampshire.
Environmental Consulting Services

POSTED

13 days ago

DEADLINE

in about 15 hours
View Details
NAICS: 484220
SLED
Forklift Delivery and Logistics (FOB Destination)This subcontract, managed by the New Hampshire Das Purchasing agency, covers the transportation and final delivery of forklifts to the NH Liquor Commission in Concord, New Hampshire. The agreement is established under FOB Destination terms, meaning the provider is responsible for all costs and risks associated with the shipment until the equipment reaches its final destination. Key requirements include the provision of insurance and the guarantee of safe handling throughout the logistics process. Interested parties must submit their responses by August 26, 2026, in accordance with the solicitation posted on August 12, 2026. The contract falls under NAICS code 484220 for specialty freight trucking.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

13 days ago

DEADLINE

in about 15 hours
View Details
NAICS: 423820
SLED
Used Forklift Supply – Hyster S80XL ModelThis subcontract opportunity, managed by the New Hampshire Das Purchasing agency, involves the procurement and delivery of one used Hyster S80XL forklift. The required equipment must meet performance and configuration specifications identical to those of a new unit. The solicitation was posted on August 12, 2026, with a response deadline of August 26, 2026. This procurement falls under NAICS code 423820 and is being handled through the statewide Bids and Contracts system.
Farm and Garden Machinery and Equipment Merchant Wholesalers

POSTED

13 days ago

DEADLINE

in about 15 hours
View Details