Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Electrical Installation and Controls Integration

Active

Federal

Response Deadline07/27/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the installation of electrical connections compliant with the National Electrical Code and the integration of a control system featuring automated lead/lag operation and Modbus protocol for remote monitoring. This work is critical to ensuring reliable and efficient system performance through standardized electrical practices and advanced automation capabilities. The project demands technical precision in both wiring and control system configuration to support real-time data exchange and operational oversight. This is a subcontract under a Total Small Business Set-Aside, classified under NAICS code 238210 for electrical contracting. The opportunity was posted on July 22, 2026, with a response deadline of July 27, 2026. Performance will occur at Wright Patterson Air Force Base, Ohio, 45433, under the purview of the Department of Defense, specifically the FA2396 USAF AFMC AFRL PZL AFRL PZLE office. The contract is strictly limited to small business concerns as defined by SBA regulations, and interested parties must submit proposals before the specified deadline to be considered.

General Info

Small business electrical contract at Wright-Patterson AFB for NEC-compliant wiring and Modbus control system.

Agency

Department Of Defense → FA2396 USAF Afmc Afrl Pzl Afrl PzleView Agency

NAICS

238210 - Electrical Contractors and Other Wiring Installation ContractorsView NAICS

Place of Performance

Wright Patterson AFB, OH, 45433, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 22

subcontract

Response DeadlineJul 27

Submission deadline

Response Deadline

07/27/2026, 04:00:00 PM UTCin about 15 hours

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA2396 USAF Afmc Afrl Pzl Afrl Pzle

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA2396 USAF Afmc Afrl Pzl Afrl Pzle

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Install electrical connections per NEC standards and integrate control system with automated lead/lag operation and Modbus protocol for remote monitoring.

Similar Contracts

Same NAICS industry code

Elevator Lobby 2 Way CommunicationsThe contract involves the installation of 23 new two-way communication boxes in elevator lobbies across the terminal, including 17 passenger elevators, 3 service elevators, and 3 ramp landing elevators. This work is part of a broader effort to enhance safety and emergency communication capabilities within the facility. The project is managed by the Port of Seattle’s Aviation Project Management Group, with Angela Peterson serving as the primary point of contact and Christina Burdett as the project manager. The solicitation was posted on July 26, 2026, and falls under NAICS code 238210, which corresponds to electrical contracting services. While no set-aside details or specific deadlines are provided, the contract is listed as a forecast indicating the agency anticipates proceeding with procurement. All installations will occur on-site at the Port of Seattle facility, and inquiries should be directed to the provided contact information.

Aviation Project Management Group

POSTED

about 8 hours ago

DEADLINE

Variable Frequency Drives (VFD) Replacement Phase 3 (DBB)The Port of Seattle is forecasting the third phase of a project to replace 125 failing Robicon Variable Frequency Drives with new equipment, aiming to enhance operational efficiency and reliability across its aviation facilities. This contract requires full removal and installation of the new VFDs, along with comprehensive wiring, testing, and commissioning to ensure seamless integration into the existing infrastructure. A critical component of the project is connecting all new VFDs to the Port’s Direct Digital Controller system to enable real-time monitoring of energy usage, output control readings, and system efficiency, supporting long-term energy management goals. The work is scoped under NAICS code 238210, indicating it falls within the electrical contracting category, and will be executed under a design-bid-build delivery method. The project is being managed by the Aviation Facilities & Infrastructure division of the Port of Seattle, with primary point of contact Yanet Maldonado and Project Manager Sharon Miick available for coordination. While specific timelines and funding details are not provided in the forecast data, interested parties are directed to the official solicitation portal for further information, with the forecast posted on July 26, 2026. Performance will occur at Port of Seattle facilities, though exact locations are not specified.

Aviation Facilities & Infrastructure

POSTED

about 8 hours ago

DEADLINE

Operational Security Cameras Bagwell and North Cargo AreasThe contract entails the design, permitting, and construction of a new security camera system across the Bagwell and North Cargo Operations areas at the Port of Seattle, aimed at enhancing operational surveillance and enforcement capabilities. A total of 50 high-resolution cameras will be installed at 43 distinct locations to replace and expand upon existing systems that currently focus primarily on conveyor systems and security doors. The installation will significantly improve coverage along main terminal drive lanes and entrances in the Bagwell area, providing clearer imagery for forensic investigations and better compliance monitoring of the Port’s movement rules and regulations. In the North Cargo area, the system will deliver flexible, broad-area monitoring through pan-tilt-zoom cameras that can be manually controlled to cover dynamic operational spaces and bridge gaps in existing surveillance. The project is classified under NAICS code 238210 for electrical contractors and is managed by the Aviation Project Management Group within the Port of Seattle. The primary point of contact is Angela Peterson, with Randa Williams serving as the project manager. The solicitation was posted on July 26, 2026, and no set-aside provisions have been designated. All work is expected to be performed on-site at the Port of Seattle, with no specific city or state details provided in the public data. The system is designed to ensure comprehensive, adaptable, and high-quality video coverage to support both safety and regulatory enforcement across critical cargo handling zones.

Aviation Project Management Group

POSTED

about 8 hours ago

DEADLINE

Rental Car Facility (RCF) Quick Turn Around (QTA) Area Fire Suppression System Replacement (Re-bid)The Port of Seattle’s Aviation Project Management Group is planning to replace the existing Aqueous Film Forming Foam system containing PFAS at the Rental Car Facility located in SeaTac with a fully compliant dry fire suppression system. The project entails the complete removal of contaminated foam and related components, followed by the design and installation of a new dry system including tanks, valves, pumps, sprinkler lines, sprinkler heads, and reserve tanks. The new system must be integrated with the facility’s existing Fire Alarm System to ensure full functionality and compliance with safety standards. This effort is part of a broader initiative to eliminate PFAS materials and transition to environmentally safer fire protection technologies. The contract is being rebid under the NAICS code 238210 for plumbing, heating, and air-conditioning contractors, and the primary point of contact for inquiries is Todd Rehm, with project management oversight provided by Pat Nakamura. The solicitation is forecasted for release, with no set aside type specified, and interested parties should reference the official portal for updates and formal documentation.

Aviation Project Management Group

POSTED

about 8 hours ago

DEADLINE

Parking Garage UPSThe contract involves the demonstration and full replacement of the existing uninterruptible power supply (UPS) system in a parking garage, which is critical for maintaining operations of ticketing kiosks and associated automated gates during power outages. The replacement scope encompasses the installation of new UPS equipment along with all supporting electrical infrastructure, including subpanels, electrical feeders, disconnects, and circuit breakers, ensuring seamless integration and reliable backup power. The new UPS units will be equipped with data connectivity features to enable remote alarm monitoring and system diagnostics, enhancing operational oversight and preventive maintenance capabilities. The project is under the auspices of the Port of Seattle’s Aviation Project Management Group and is classified under NAICS code 238210, indicating it falls within the electrical contracting industry. The solicitation was posted on July 26, 2026, and is currently in forecast status, meaning it is a notice of anticipated procurement rather than an active bid opportunity. Primary point of contact for inquiries is Yanet Maldonado, with JJ Jordan serving as the project manager; both can be reached via phone or email provided. The work is expected to be performed at the parking garage facility managed by the Port of Seattle, although specific location details are not provided in the data.

Aviation Project Management Group

POSTED

about 8 hours ago

DEADLINE

Electrical Unit Price Portwide 2026The contract titled Electrical Unit Price Portwide 2026 encompasses a wide range of electrical work to be performed across multiple Port of Seattle locations including Seattle-Tacoma International Airport, Maritime Properties, and surrounding areas. The scope includes installation of raceways, wiring, medium voltage cabling, electrical boxes, transformers, temporary power and lighting systems, testing, grounding, and other related equipment and devices, all in strict compliance with applicable code requirements from enforcing agencies. The Contractor is responsible for providing all labor, tools, materials, equipment, and incidentals necessary to fulfill work orders issued through the Port’s Work Authorization process. Labor must be staffed according to the specified classifications outlined in the Schedule of Unit Prices, ensuring standardized pricing and workforce categorization. The contract is forecasted for 2026 and falls under NAICS code 238210, indicating its classification as electrical contracting services. It is managed by the Port Construction Services division of the Port of Seattle, with Heather Bowden serving as the primary point of contact and Lesley Miles as the Project Manager. The work will occur at various Port-wide sites, requiring coordination across multiple operational areas. There is no set-aside designation indicated, and the solicitation is available for review through the Port’s online portal. Contractors must be prepared to respond to dynamic project needs, with pricing governed by the established unit rate schedule and all work subject to the Port’s authorization and compliance protocols.

Port Construction Services

POSTED

about 8 hours ago

DEADLINE

Specialty Trade Subcontracting – WBE/MBE ParticipationThis contract opportunity is designed to promote participation by women-owned and minority-owned businesses across all specialty trade subcontracting activities under NAICS code 238210, which covers plumbing, heating, and air-conditioning contractors. Subcontractors must commit to active involvement in project execution and are required to submit detailed utilization reports demonstrating their engagement and compliance with inclusion goals. The opportunity is open to eligible businesses seeking to engage in subcontracting work under the Engineering agency’s New York division, with no specific set-aside designation but with an explicit emphasis on fostering diversity in contracting. All participants must fulfill reporting obligations to ensure transparency and accountability in the utilization of certified businesses, and the deadline for responses is August 27, 2026, at 6:30 PM. The contract is posted on the open procurement platform and is available for review through the provided online portal.

POSTED

about 12 hours ago

DEADLINE

in about 1 month

Electrical Installation ServicesThe contract titled Electrical Installation Services encompasses the full installation of electrical systems including power distribution, lighting, and control systems, all required to meet New York State Department of Transportation standards. Compliance with these stringent regulatory requirements is mandatory, and all work must be preceded by the submission and formal approval of detailed shop drawings, ensuring design accuracy and engineering integrity before execution. The solicitation is categorized as a subcontract under NAICS code 238210, indicating specialized electrical contracting services, and was posted on July 26, 2026, with a response deadline of August 27, 2026, at 6:30 PM. The performing agency is listed as Engineering under the New York organization, though specific location details such as city, state, or address are not provided, indicating potential flexibility in the project’s place of performance within the state. All submissions and communications must be directed through the online procurement portal linked in the contract data.

POSTED

about 12 hours ago

DEADLINE

in about 1 month

Electrical System Upgrades and Rough-InsThe contract titled Electrical System Upgrades and Rough-Ins involves the installation or modification of electrical conduits, outlets, lighting fixtures, and switches to align with a new office layout. The work falls under NAICS code 238210 and is structured as a subcontract under the Government of Jamaica through the Ministry of Water Environment and Climate Change. All work must be performed at the designated government facility, though specific location details are not provided. The solicitation was posted on July 25, 2026, with a strict response deadline of August 17, 2026, at 7:00 PM. Interested parties must submit proposals through the official Government of Jamaica e-procurement portal prior to the deadline to be considered for award. There is no set-aside designation indicated for small businesses or other categories, and no point of contact is listed for inquiries.

Ministry of Water Environment and Climate Change

POSTED

DEADLINE

Electrical Systems and Power DistributionThis contract is a small business set-aside for the installation of comprehensive electrical systems and power distribution infrastructure, including power distribution systems, emergency generators, lighting, variable frequency drives, and supporting electrical components. The work is to be performed in Portland, Oregon, with a performance location zip code of 97204, and is classified under NAICS code 238210, which corresponds to electrical contracting. The opportunity is designated as a Total Small Business Set-Aside under SBA regulations, meaning only small businesses are eligible to bid, ensuring participation from qualified small business contractors. The solicitation was posted on July 25, 2026, with a firm deadline for responses on August 5, 2026, at 10:00 PM Eastern time. The contracting organization is the Department of Defense through its W071 Endist Portland office, indicating this effort supports defense-related infrastructure needs. All bid submissions must comply with federal acquisition requirements, and the contract award will be made to a capable small business that can deliver the full scope of electrical work in accordance with technical and regulatory standards.

W071 Endist Portland

POSTED

DEADLINE

Commercial Kitchen Equipment Installation & Electrical IntegrationThe contract entails the full installation of all commercial kitchen equipment with comprehensive electrical integration to NEMA 6-30P standards, requiring precise wiring and power configuration to support heavy-duty appliances. Facility modifications are included to accommodate the new equipment layout, ensuring structural, ventilation, and plumbing compatibility, followed by rigorous operational testing to validate functionality, safety, and compliance with industry requirements. The work is scheduled for performance in San Diego, California, at the 92136 ZIP code, under the oversight of the Naval Supply Systems Command Fleet Logistics Center San Diego, a Department of Defense entity. This subcontract falls under NAICS code 238210, classifying it as commercial and industrial machinery and equipment installation. The solicitation was posted on July 25, 2026, with bids due by July 31, 2026, at 7:00 PM, leaving a limited window for qualified contractors to respond.

Navsup Flt Logistics Ctr San Diego

POSTED

DEADLINE

Electrical Systems and LightingThe contract entails the installation of a 100 KVA underground electrical service along with complete lighting systems and related electrical infrastructure, targeting a specific site in Higashimatsushima with postal code 981-0503. This is classified as a subcontract under NAICS code 238210, which corresponds to electrical contracting services, and is issued by the Department of Defense under the office designation FA5025 356 Eceg Pk. The solicitation was posted on July 25, 2026, with a mandatory response deadline of August 7, 2026, at 2:00 AM, requiring all proposals to be submitted before that time to be considered. The scope of work covers all necessary components to establish a fully functional underground power supply and lighting network, including trenching, conduit placement, transformers, distribution panels, light fixtures, and compliance with applicable electrical codes and safety standards. While no set-aside designation is specified, the location and agency suggest this installation supports defense-related facilities or operations in the region, necessitating strict adherence to security, environmental, and operational requirements.

FA5025 356 Eceg Pk

POSTED

DEADLINE

More opportunities from Department Of Defense → FA2396 USAF Afmc Afrl Pzl Afrl Pzle

Same awarding agency

Unable to Decompose Subcontract OpportunitiesThe contract titled "Unable to Decompose Subcontract Opportunities" was posted on July 23, 2026, with a response deadline of July 31, 2026, and is categorized as a subcontract opportunity under the Department of Defense, specifically tied to the FA2396 USAF Afmc Afrl Pzl Afrl Pzle organization. The place of performance is listed as Goulds, Florida, with a zip code of 32542, though no detailed office address or point of contact is provided. The NAICS code is listed as 000000, indicating an unresolved or unclassified code, and no set-aside type or description is applicable. Due to a configuration error that prevented access to the prime contract details, no subcontract or supplier opportunities can be identified or structured at this time, rendering the opportunity currently unactionable. The official UI link is available for reference, but no further data can be extracted or utilized without resolving the system error.

POSTED

DEADLINE

AFRL/RWTE Explosive-Resistant Friction Ovens (Building 1206)The U.S. Air Force Research Laboratory at Wright-Patterson Air Force Base is soliciting two explosive-resistant friction ovens under solicitation COMBO-AFRL-RMZB-2026-0016, issued as a commercial item RFQ under the Revolutionary FAR Overhaul Part 12 framework. The requirement is set aside 100% for small businesses, with the NAICS code 333994 for industrial process furnace and oven manufacturing, and the ovens must meet all specifications outlined in the Minimum Requirements Document dated 27 May 2026. Delivery is FOB destination to Building 1206 at Eglin AFB, Florida, with an urgent request for prompt delivery. The government will evaluate offers using the Lowest Price Technically Acceptable method, prioritizing the lowest-priced quote that meets all technical requirements, and will stop evaluating further proposals once a conforming and acceptable offer is found. Offerors must assume the government has no knowledge of their capabilities and must provide full documentation within their submission. The solicitation incorporates a comprehensive set of required provisions and clauses covering compliance with Buy American, Trade Agreements, labor standards, cybersecurity, small business subcontracting, tax certification, ethical conduct, and prohibitions related to foreign entities, human trafficking, child labor, and restricted regions like Xinjiang and Sudan. Offerors must also include warranty documentation and specify the validity period of their quote. Submissions must be emailed by 31 July 2026 at 5:00 PM ET to Jason Sav, Contract Specialist, and no DPAS priorities apply. The government reserves the right to award all, some, or none of the items, and may resolicit if only one qualifying offer is received. All terms and conditions follow RFO 52.212-4, and the acquisition is subject to a full suite of DFARS supplements governing contractor responsibilities, data rights, payment methods, and security requirements.

Industrial Process Furnace and Oven Manufacturing

POSTED

DEADLINE

Operator Training DeliveryThe contract titled Operator Training Delivery requires the provision of up to four hours of on-site training for up to three government personnel focused on the operation and routine maintenance of a newly installed compressed air system. Training must be conducted at Wright Patterson AFB with a zip code of 45433 and is intended to ensure personnel are fully capable of safely and effectively using and maintaining the equipment. The opportunity is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to respond, and the NAICS code 611512 classifies the work under other schools and instruction services. The solicitation was posted on July 22, 2026, with a response deadline of July 27, 2026, at 4:00 PM, and is managed by the Department of Defense under the FA2396 USAF Afmc Afrl Pzl Afrl Pzle agency. All proposed services must comply with federal contracting requirements and be delivered within the specified timeframe and location.

Flight Training

POSTED

DEADLINE

in about 15 hours

Commissioning and Performance TestingThe contract requires full commissioning of systems according to manufacturer-recommended procedures, including operational testing and demonstration of complete system functionality to ensure all components operate as intended. The work must be performed at Wright Patterson AFB with a zip code of 45433, and all tasks must adhere to established technical standards to verify performance and reliability. This is a subcontract under a Total Small Business Set-Aside, meaning only small businesses as defined by the SBA are eligible to bid, and the NAICS code 541330 indicates the work falls under engineering services. The solicitation was posted on July 22, 2026, with a response deadline of July 27, 2026, at 4:00 PM, and is managed by the Department of Defense through the USAF AFMC AFRl PZL AFRl PZLE office.

Engineering Services

POSTED

DEADLINE

in about 15 hours

Mechanical Installation and PipingThe contract entails the removal of existing compressors and dryers and the installation of new units complete with all associated piping, ensuring each system is equipped with independent isolation capabilities to maintain uninterrupted plant air service throughout the work. The project requires careful coordination to avoid disruptions to critical operations while adhering to technical specifications for piping connections and system integration. All work must be performed at Wright Patterson AFB, Ohio, with the full scope focused on mechanical installation and piping tasks related to compressed air infrastructure. This is a total small business set-aside subcontract under the NAICS code 238220, meaning only certified small businesses are eligible to respond. The solicitation was posted on July 22, 2026, with a response deadline of July 27, 2026, and is managed by the Department of Defense through the FA2396 USAF AFMC AFRl PZL AFRl PZLE office. The location of performance is strictly designated to the Wright Patterson AFB facility, and all contractors must be prepared to comply with federal procurement requirements while delivering seamless, continuous air service during and after installation.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

in about 15 hours

Supply of Air-Cooled Desiccant Air DryersThe contract calls for the supply of two air-cooled desiccant air dryers, each with a minimum capacity of 490 cubic feet per minute, to support critical compressed air system operations at Wright-Patterson Air Force Base. The equipment must meet stringent performance requirements to ensure reliable and consistent air quality for military and aerospace applications. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses certified under the Small Business Administration guidelines, and is classified under NAICS code 33399A for other commercial and industrial machinery and equipment manufacturing. The opportunity was posted on July 22, 2026, with responses due by 4:00 PM Eastern Time on July 27, 2026, and the place of performance is firmly designated at the 45433 zip code in Wright Patterson AFB. All work must be executed in alignment with Department of Defense standards and delivery timelines to support ongoing operational readiness.

POSTED

DEADLINE

in about 15 hours

Supply of Oil-Free Rotary Screw Air CompressorsThe contract calls for the supply of two new oil-free, air-cooled rotary screw air compressors, each with a minimum capacity of 400 CFM at 125 psig, ensuring reliable, contaminant-free compressed air for critical operations. The requirement is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to respond, and the NAICS code 333912 applies to industrial machinery manufacturing. The performance location is specified as Wright Patterson AFB with a zip code of 45433, indicating the equipment must be delivered and installed at this Department of Defense facility. The solicitation was posted on July 22, 2026, with proposals due by 4:00 PM ET on July 27, 2026, leaving a narrow five-day window for submissions, and the contracting activity is under the FA2396 USAF AFMC AFRl PZL AFRl PZLE organization.

Air and Gas Compressor Manufacturing

POSTED

DEADLINE

in about 15 hours

Replace Bldg 65 Air Compressors (UPDATE)The contract solicitation COMBO-AFRL-RIZ-2026-0012, titled Replace Bldg 65 Air Compressors, is a total small business set-aside under FAR 19.5, targeting NAICS code 333912 for air and gas compressor manufacturing. It is managed by the Department of Defense through the USAF AFMC AFRIL PZL AFRIL PZLE office located at Wright Patterson Air Force Base, Ohio, with performance required at Building 65, Area B, 2790 D Street, WPAFB. A mandatory final site visit is scheduled for July 23, 2026, from 2:00 to 3:00 PM EST, and attendance is required in person with no virtual option available; all participants must RSVP by July 22, 2026, to michael.hornberger.1@us.af.mil and request base access passes by the same deadline if needed. Responses to the solicitation are due by July 27, 2026, at 4:00 PM EST, and the primary point of contact for inquiries is Mike Hornberger, reachable via email or phone at 385-634-3854.

Air and Gas Compressor Manufacturing

POSTED

DEADLINE

in about 15 hours

Logistics and Return Shipment of Refurbished HMD

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Precision Calibration and Functional Testing of Refurbished HMD

Testing Laboratories and Services

POSTED

DEADLINE

OLED Micro-Display Integration for Helmet-Mounted Display (HMD)

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

CMMC & NIST SP 800-171 Compliance Support

Computer Systems Design Services

POSTED

DEADLINE