Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

This Government Contract opportunity from Government of Canada was posted on May 6, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Emergency 24/7 Cryogenic Gas Delivery Services

Closed
International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 484220
New
SLED
Packaging, Shipping, and Logistics Services for Lounge Seating Kits
Correctional Trng Rehabilitation Aut

POSTED

about 11 hours ago

DEADLINE

in 20 days
NAICS: 484220
New
SLED
Heavy Haul and Equipment TransportChesterfield County in Virginia is seeking a subcontractor to transport heavy construction equipment, materials, or oversized loads to and from project sites, with a specified place of performance in Chesterfield, ZIP code 23832. The procurement falls under NAICS code 484220, which categorizes it as truck transportation for heavy and large loads, indicating a specialized logistics requirement. The contract opportunity was posted on August 6, 2026, and responses are due by September 10, 2026, giving potential vendors approximately five weeks to prepare and submit proposals. The contract type is explicitly identified as a subcontract, meaning the selected party will operate under a primary contractor rather than directly with the county. There is no set-aside designation specified, suggesting the opportunity is open to all eligible businesses without preference given to small, disadvantaged, or other certified firms. All communications and submissions must comply with the timelines and requirements outlined in the solicitation, with no designated point of contact provided for inquiries beyond the web portal link.
Chesterfield County

POSTED

about 17 hours ago

DEADLINE

in about 1 month
NAICS: 484220
New
SLED
Transportation and Logistics for Regulated WasteThe contract requires the safe and compliant transportation of recovered refrigerants and refrigerant-containing appliances in accordance with both Department of Transportation and Environmental Protection Agency regulations. All shipments must be handled using HAZMAT-certified vehicles and qualified personnel to ensure adherence to federal safety and environmental standards. The work falls under NAICS code 484220, classifying it as specialized truck transportation for hazardous materials, and is structured as a subcontract under the Solid Waste & Resource Recovery agency in Florida. Compliance with all regulatory frameworks is mandatory, and the project emphasizes proper handling, labeling, documentation, and secure transit of regulated waste throughout the performance area. The solicitation was posted on August 6, 2026, with a response deadline of August 26, 2026, at 9:00 PM Eastern Time. There is no specified set-aside type or set-aside description, and the place of performance location details are not provided, suggesting operations may span multiple areas within Florida. The contract is accessible online via the Florida county procurement portal, and all interested parties must meet HAZMAT certification and regulatory compliance requirements to qualify. No point of contact is listed, indicating that further inquiries should be directed through the official online portal.
Solid Waste & Resource Recovery

POSTED

about 18 hours ago

DEADLINE

in 19 days
NAICS: 484220
New
SLED
Leachate Hauling and Transportation Services
Solid Waste & Resource Recovery

POSTED

about 18 hours ago

DEADLINE

in 19 days
NAICS: 484220
New
SLED
Heavy Haul and TransportationThe City of Hickory, North Carolina, has issued a subcontract solicitation for heavy haul and transportation services to move oversized or heavy equipment and materials to and from job sites. This contract is classified under NAICS code 484220, which pertains to specialty trucking services, indicating a focus on specialized freight movement requiring permits, specialized equipment, and experienced operators. The solicitation was posted on August 6, 2026, and responses are due by September 3, 2026, at 6:00 PM Eastern Time. The scope requires reliable, compliant, and safe transportation solutions capable of handling non-standard loads across various locations within the region, with performance expected to meet industry safety and regulatory standards. Although specific delivery locations and load details are not outlined in the posted data, contractors must be prepared to manage logistics for unpredictable or complex transport requirements. The bid is open to qualified subcontractors with appropriate licensing, insurance, and demonstrated experience in heavy haul operations, and interested parties should access the full solicitation through the provided public procurement portal.
City of Hickory

POSTED

about 18 hours ago

DEADLINE

in 27 days
NAICS: 484220
New
SLED
Logistics and Delivery of Completed Trailers
Texas Department of Transportation

POSTED

about 19 hours ago

DEADLINE

in 20 days
NAICS: 484220
New
SLED
Logistics & Transportation of Surplus Assets
Tips Purchasing Cooperative

POSTED

about 19 hours ago

DEADLINE

in about 1 month
NAICS: 484220
New
Federal
Hauling and Trucking Services
241-NETWORK Contract Office 01 (36C241)

POSTED

about 21 hours ago

DEADLINE

in 21 days
NAICS: 484220
New
Federal
Pharmaceutical Logistics and Distribution to Military Installations
Defense Health Agency

POSTED

about 21 hours ago

DEADLINE

in about 2 months
NAICS: 484220
New
Federal
Heavy Hauling and Equipment Transport
Ocp-Pod-Acq-Mgmt-Branch-Ftc USDA

POSTED

about 21 hours ago

DEADLINE

in 10 days
NAICS: 484220
New
Federal
Domestic Freight and Distribution
DLA Maritime - Puget Sound

POSTED

about 21 hours ago

DEADLINE

in about 10 hours
NAICS: 484220
New
Federal
Debris Removal and Hauling ServicesThe contract titled Debris Removal and Hauling Services is a Small Business Set Aside under the NAICS code 484220, exclusively available to small businesses, and is managed by the Department of Homeland Security through Base Cape COD. The work involves the complete removal, transportation, and disposal of tear-off roofing debris, with a strict requirement to submit landfill receipts to the Contracting Officer’s Representative as proof of proper disposal. Performance of the contract is located at Buzzards Bay, Massachusetts, with a response deadline of August 25, 2026, and the opportunity was posted on August 6, 2026. The contract type is structured as a subcontract, indicating it may be awarded to a subcontractor under a larger prime agreement. All activities must align with regulatory requirements for waste handling and documentation, ensuring accountability and compliance with federal disposal protocols.
Base Cape COD(00052)

POSTED

about 21 hours ago

DEADLINE

in 18 days

AI Contract Overview

Show more

The contract provides for 24/7 on-demand emergency delivery of cryogenic gases and Dewars to facilities within the National Capital Region, ensuring continuous operations by preventing any stockouts during critical scientific and research activities. Logistics must be capable of rapid response to urgent needs, with service availability around the clock to support time-sensitive experiments and operations that rely on uninterrupted cryogenic supply. The contractor is expected to maintain readiness for immediate deployment, leveraging local capacity and reliable infrastructure to meet the high-stakes demands of the National Research Council of Canada. This is a subcontract under NAICS code 484220, specifically for specialized transportation and delivery services within the NCR, with a response deadline of May 27, 2026. The work is tied directly to federal government operations, and performance is critical to the continuity of national research initiatives. While no set-aside provisions are specified, the contract underscores urgency, precision, and reliability as non-negotiable requirements, with all deliveries required to occur without delay regardless of time or circumstance.

General Info

Emergency 24/7 cryogenic gas delivery to National Research Council facilities in National Capital Region.

Agency

Government of Canada → National Research Council of CanadaView Agency

NAICS

484220 - Specialized Freight (except Used Goods) Trucking, LocalView NAICS

Place of Performance

National Capital Region (NCR), CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyGovernment of Canada → National Research Council of Canada
ContactsNo contacts available
OfficeN/A
Organization / Agency
Government of Canada → National Research Council of Canada
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
On-demand emergency delivery of cryogenic gases and Dewars to NRC facilities, ensuring zero stockouts during critical operations with rapid response logistics in the NCR.

More opportunities from Government of Canada → National Research Council of Canada

Same awarding agency

NAICS: 333515
New
International
Fiber Laser Cutter for Aluminum and Copper
Solicitation # 26-58021
The National Research Council Canada is seeking a high-precision, enclosed fiber-laser cutting system capable of reliably cutting aluminum and copper for battery prototype components through solicitation 26-58021, with a submission deadline of July 27, 2026 at 14:00 EDT. The system must feature a fiber-type laser with a minimum power output of 3000W and a 10:1 operational turn-down ratio, a work area between 400x300mm and 635x635mm, a Z-axis of at least 50mm, and positioning precision of 0.1mm or better. It must cut 4.064mm aluminum and 3.175mm copper at speeds of at least 1m/min, include an auto-tracking laser head, a fully enclosed work area, integrated gas assist support for oxygen, nitrogen, and air, and an active protection system against back-reflected laser energy. The scope includes delivery, installation, commissioning, and training, with all deliverables required to be received at NRC Building U91, 2320 Lester Road, Ottawa, ON K1V 1S2. The system must be delivered under Incoterms® 2020 Delivery at Place (Vancouver, BC), with the vendor responsible for all shipping, customs, and duty costs. Only Canadian suppliers are eligible under the Policy on Reciprocal Procurement, and offers must be submitted electronically in three distinct sealed attachments labeled Technical Offer, Financial Offer, and Forms, with a total message size not exceeding 10MB; compressed files, links, or physical submissions are prohibited. The contract is awarded on the basis of the lowest evaluated price among compliant offers, with all mandatory technical requirements identified with the word “must” serving as pass/fail gates; failure to meet these disqualifies an offer from financial review. Offerors must submit sample cuts within 15 business days of receiving materials, accompanied by a detailed cutting report. Acceptance of the system by Canada requires a formal written request from the contractor, followed by a 30-day inspection period; rejection allows Canada to require corrections at the contractor’s expense without additional cost. Payment terms specify undisputed invoices will be settled within 30 days of receipt in acceptable form, with 15% withholding for non-resident contractors unless a CRA waiver is provided. Invoices must be emailed
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 811310
New
International
Calibration Services for (3) Years for the NRC- Clinical Trial Material Facility (CTMF) and Emergency Calibration Services
Solicitation # 26-58107
The contract encompasses a three-year calibration services agreement for the National Research Council of Canada’s Clinical Trial Material Facility, starting in September 2026, and structured as three consecutive one-year terms. The vendor will be responsible for calibrating all 365 pieces of equipment listed in Annex 1, which are integral to bio-manufacturing operations and must remain compliant with industry standards and regulatory mandates. Calibration services are essential to ensure the accuracy and reliability of equipment, directly supporting the integrity of clinical trial materials. In addition to routine calibrations, the contract includes mandatory provision of emergency calibration services to be activated on an as-needed basis during unexpected equipment failures, operational disruptions, or urgent compliance events. The solicitation, issued under reference number 25-58107/26-58107, was posted on August 6, 2026, with responses due by August 25, 2026, and is part of an open competitive bidding process managed by the Government of Canada through the National Research Council. The primary point of contact for inquiries is Cindy Romain, Contracting Authority, reachable via email and phone provided in the solicitation.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

1 day ago

DEADLINE

in 18 days
View Details
NAICS: 238150
New
International
M50 South Window Replacement Project
Solicitation # 26-58058
The M50 South Window Replacement Project, solicited under number 26-58058 by the National Research Council of Canada, requires the replacement of 20 windows and associated masonry repointing at Building M-50 located at 1200 Montreal Road in Ottawa, Ontario. The work includes removing and replacing 11 existing windows and frames, installing nine new insulated glass units, providing insulation and sealant, and fitting new roller shade blinds. All deliverables must be completed and received by December 31, 2026, and performance is restricted to Canadian suppliers due to the Policy on Reciprocal Procurement, with non-Canadian bids automatically rejected. A mandatory site visit is required on either June 29 or June 30, 2026, at 10:00 a.m. ET, and failure to attend and sign the attendance sheet will result in bid disqualification. Proposals must be submitted electronically via email no later than 2:00 p.m. EST on July 30, 2026, with a maximum size of 10 MB, in either English or French, and without ZIP attachments or external links. Bidders must disclose all subcontractors and suppliers, provide integrity declarations, and confirm compliance with government policies on inadmissibility and suspension. The contract imposes strict compliance with construction, safety, and security protocols. All personnel, including subcontractors, must meet mandatory security clearance requirements to access the site, and access to PROTECTED or CLASSIFIED information is strictly prohibited. The contractor is responsible for maintaining comprehensive insurance coverage including Commercial General Liability and Umbrella/Excess Liability, and must develop a Site Specific Safety Plan addressing hazards such as fire, flooding, and pandemics. Safety compliance is enforced through an on-site safety board displaying project notices, emergency schematics, and Ontario Health and Safety Act information. Materials must be delivered in original factory packaging, labeled with manufacturer details, stored off the ground in dry, well-ventilated areas, and protected from damage, with painting materials kept away from heat sources. Quality assurance demands manufacturer-certified product documentation, certified test reports including sand gradation per CAN/CSA-A179, and shop inspections for glass. A mock-up including glazing, air barriers, and vapor retarder seals must be constructed and inspected for 24 hours prior to proceeding with full installation. Final acceptance by NRC is required before releasing affected work areas. Payment
Glass and Glazing Contractors

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 541611
New
International
Reciprocal Procurement Compliance and Certification ServicesThe contract titled Reciprocal Procurement Compliance and Certification Services is a subcontract under the Government of Canada, specifically managed by the National Research Council of Canada, aimed at providing expert support to complete Annex H – Declaration for Reciprocal Procurement. This declaration is essential to align with Canadian federal procurement policies, ensuring that all contractual obligations related to reciprocal trade agreements are accurately documented and formally certified. The work involves navigating complex regulatory requirements to validate compliance, which may include reviewing supply chains, verifying domestic content, and preparing auditable records that meet federal standards. The opportunity is posted with a response deadline of September 1, 2026, and is classified under NAICS code 541611, indicating it pertains to administrative management and general management consulting services. Performance of the contract is expected to take place in Ottawa, though no specific office address or point of contact is provided. The solicitation does not specify a set-aside type, suggesting it is open to all eligible businesses regardless of size or designation. Contractors are expected to deliver precise, policy-compliant documentation that enables the National Research Council of Canada to proceed with procurement activities in full adherence to national and international trade agreements.
Administrative Management and General Management Consulting Services

POSTED

3 days ago

DEADLINE

in 25 days
View Details
NAICS: 423490
New
International
Supply of Spares, Consumables, and DocumentationThe contract titled Supply of Spares, Consumables, and Documentation under the NAICS code 423490 is a subcontract issued by the National Research Council of Canada on behalf of the Government of Canada, with a posted date of August 4, 2026, and a response deadline of September 1, 2026. It requires the supply of essential spare parts and consumables such as seals and sample holders, alongside comprehensive technical documentation including operational manuals, software licenses, and RSPLs, all to be delivered as integral components of system provisioning. The place of performance is specified as Ottawa, Canada, and the contract is structured to ensure complete technical readiness and ongoing functionality of the delivered systems. All deliverables must be provided in alignment with the technical specifications mandated by the National Research Council of Canada, with the expectation that spare parts and consumables will support long-term operation and maintenance, while documentation must be complete, accurate, and accessible for end-user deployment. Subcontractors are expected to meet delivery timelines and quality standards without deviation, and submissions must be received before the deadline to be considered. The contract does not specify set-aside provisions or organization type restrictions, allowing eligible suppliers to participate under standard subcontracting rules applicable to federal procurement in Canada.
Other Professional Equipment and Supplies Merchant Wholesalers

POSTED

3 days ago

DEADLINE

in 25 days
View Details
NAICS: 611430
New
International
Training Delivery for ARC System OperationThe contract entitled Training Delivery for ARC System Operation is a subcontract issued by the National Research Council of Canada under the Government of Canada, soliciting services for on-site training of NRC staff in the operation, maintenance, and safety protocols of the ARC system. The training must be delivered in Ottawa and includes the development of bilingual training materials to ensure accessibility and comprehension for all participants. The work requires documented outcomes to verify the effectiveness of the training and the proficiency gained by staff, ensuring compliance with operational and safety standards. This subcontract falls under NAICS code 611430, indicating it is related to other schools and instruction services. The opportunity was posted on August 4, 2026, with a response deadline of September 1, 2026, at 7:00 PM Eastern Time, and is accessible via the Canada Buys procurement portal.
Professional and Management Development Training

POSTED

3 days ago

DEADLINE

in 25 days
View Details
NAICS: 541330
New
International
Technical Configuration and Commissioning ServicesThe contract seeks technical configuration and commissioning services for the ARC system, requiring full validation of its hardware and software integration, precise calibration, and performance verification to ensure alignment with established technical specifications. The work involves systematic testing and documentation to confirm that all components function together as intended under operational conditions, with particular attention to accuracy, reliability, and compliance with required standards. This subcontract is issued by the National Research Council of Canada under the Government of Canada and is classified under NAICS code 541330, indicating professional, scientific, and technical services. The solicitation was posted on August 4, 2026, with a response deadline of September 1, 2026, and performance is expected to occur in Ottawa. The nature of the work demands specialized expertise in system integration and verification, targeting qualified contractors capable of delivering end-to-end technical validation services.
Engineering Services

POSTED

3 days ago

DEADLINE

in 25 days
View Details
NAICS: 334516
New
International
Supply of Accelerating Rate Calorimeter (ARC) SystemThe contract involves the supply and delivery of a multi-zone Accelerating Rate Calorimeter (ARC) system designed for thermal runaway analysis of battery materials, with specific technical requirements including adiabatic sensitivity, appropriate chamber size, and compliance with UN 38.3 testing standards. This system is intended to support rigorous safety and performance evaluations of battery chemistries under controlled, high-precision conditions, ensuring accurate detection of thermal instability and runaway behavior during development and certification processes. The equipment must be fully operational and calibrated to meet international safety benchmarks for transport and storage of lithium-based cells and batteries. The contract is classified as a subcontract issued by the National Research Council of Canada under the Government of Canada, with a performance location in Ottawa. The solicitation was posted on August 4, 2026, and responses are due by September 1, 2026. The NAICS code 334516 indicates the procurement pertains to instruments and other devices used for laboratory, industrial, scientific, or medical purposes, aligning the system with advanced analytical instrumentation. The tender is open to qualified suppliers capable of delivering a turnkey solution that integrates hardware, software, safety protocols, and documentation to satisfy the government’s research and regulatory testing mandates.
Analytical Laboratory Instrument Manufacturing

POSTED

3 days ago

DEADLINE

in 25 days
View Details
NAICS: 541611
New
International
Security Compliance and Personnel Screening ManagementThe contract titled Security Compliance and Personnel Screening Management is a subcontract issued by the National Research Council of Canada under the Government of Canada, focused on managing personnel security clearances and enforcing strict escort protocols for unscreened staff. It requires adherence to federal security frameworks to ensure all personnel handling sensitive information or accessing secure facilities meet the required clearance levels and follow mandated procedures. The scope includes the end-to-end administration of screening processes, ongoing compliance monitoring, and coordination of controlled access measures to safeguard government assets and information. The contract is posted on August 4, 2026, with responses due by August 31, 2026, and performance is to occur in Mississauga. The North American Industry Classification System code 541611 indicates the work falls under administrative management and general management consulting services, underscoring the need for expert-level administrative and operational security support. While no set-aside provisions or point of contact details are provided, the contract emphasizes strict compliance with Canadian government security standards and requires the contractor to maintain rigorous documentation, reporting, and audit readiness to support national security objectives.
Administrative Management and General Management Consulting Services

POSTED

3 days ago

DEADLINE

in 24 days
View Details
NAICS: 541512
New
International
Technical Support and System Availability MaintenanceThe contract titled Technical Support and System Availability Maintenance is a subcontract issued by the National Research Council of Canada, part of the Government of Canada, to provide ongoing technical support aimed at ensuring continuous system availability, optimal performance, and strict adherence to uptime and operational readiness standards. The scope of work focuses on maintaining critical systems to meet established compliance requirements, with an emphasis on preventing downtime and sustaining high levels of reliability. This effort is essential to support the agency’s operational functions and ensure that technical infrastructure remains functional and secure at all times. The solicitation was posted on August 4, 2026, with a response deadline of August 31, 2026, and falls under the NAICS code 541512 for computer systems design and related services. Performance of the contracted work is required to take place in Mississauga. Although no specific set aside or organization type is indicated, the contract is structured as a subcontract under the broader procurement framework of the Canadian government. Interested parties must submit proposals by the specified deadline to be considered for award, with all work expected to align with the government’s standards for system integrity and continuous operational support.
Computer Systems Design Services

POSTED

3 days ago

DEADLINE

in 24 days
View Details
NAICS: 334111
New
International
Secure Hardware Supply (New, Off-the-Shelf)The contract is for the supply of new, unused, off-the-shelf hardware components that must be non-counterfeit and fully compliant with government security and integrity standards. All items must meet stringent authenticity and quality requirements to ensure they do not introduce vulnerabilities into government systems. The procurement is classified as a subcontract under NAICS code 334111, indicating it relates to computer and peripheral equipment manufacturing, and is being managed by the National Research Council of Canada on behalf of the Government of Canada. Performance of the contract is required in Mississauga, with all deliveries expected to satisfy location-specific logistical and security protocols. The solicitation was posted on August 4, 2026, and responses are due by August 31, 2026, at 7:00 PM Eastern Time. There is no set-aside designation, meaning the opportunity is open to all eligible contractors without preference based on business size or type. Interested parties must ensure full adherence to security compliance protocols and provide documentation proving the origin, authenticity, and integrity of all hardware components. The tender opportunity is publicly accessible via the CanadaBuys portal, and bidders are responsible for verifying all technical and regulatory requirements before submission.
Electronic Computer Manufacturing

POSTED

3 days ago

DEADLINE

in 24 days
View Details
NAICS: 511210
New
International
Licensed Software Provision and Technology TransferThe Government of Canada, through the National Research Council of Canada, is seeking a subcontractor to supply proprietary software and transfer related technology under a perpetual, royalty-free license. The contract requires the delivery of the software along with complete media, comprehensive documentation, and detailed technical specifications to ensure full operational capability and long-term usability. The licensed software will be deployed at the place of performance in Mississauga, with no geographic restrictions beyond this location. The solicitation is classified under NAICS code 511210, indicating a focus on software publishing, and is structured as a subcontract opportunity without a specified set-aside category. Interested parties must submit responses by the deadline of August 31, 2026, with the opportunity posted on August 4, 2026. The agreement emphasizes technology transfer, meaning the contractor must provide all necessary assets and knowledge to enable the Government of Canada to independently use, maintain, and potentially modify the software without ongoing licensing fees or restrictions. While no point of contact is listed, the tender details are accessible via the Canada Buys portal. The nature of the contract suggests a high degree of technical compliance and accountability, with expectations for seamless integration and supportability within existing federal systems.
Software Publishers

POSTED

3 days ago

DEADLINE

in 24 days
View Details