Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Equipment Maintenance and Field Support Services

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails on-site preventive maintenance, repairs, and technical support for hydraulic mulchers and their host excavators while in active operation, ensuring uninterrupted performance in the field. Services are to be delivered as needed during operational periods, with emphasis on minimizing downtime and maintaining equipment reliability through proactive servicing and immediate response to malfunctions. The scope requires skilled technicians to perform routine inspections, component replacements, fluid system maintenance, and troubleshooting under real-world working conditions. This subcontract is issued under NAICS code 811310 for machinery and equipment repair and maintenance, with solicitation materials posted on July 30, 2026, and responses due by August 5, 2026. The contracting entity is the Department of the Interior under the agency designation It Goods Fws, though specific location details for performance or contact are not provided. The work is expected to occur wherever the equipment is deployed in the field, with no restricted geographic limitations indicated. Bidders must demonstrate capacity to deliver timely, on-site support without delays, aligning with the operational demands of federal land management or natural resource activities.

General Info

On-site maintenance and repair of hydraulic mulchers and excavators for uninterrupted field operations.

Agency

Department Of The Interior → It Goods FwsView Agency

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and MaintenanceView NAICS

Place of Performance

VA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of The Interior → It Goods Fws
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of The Interior → It Goods Fws
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
On-site preventive maintenance, repairs, and technical support for hydraulic mulcher and host excavator during operations.

Similar Contracts

Same NAICS industry code

NAICS: 811310
New
Federal
Repair of Kell-Strom T-400 Riveter
Solicitation # N68520-26-SIMACQ-JC00000-0250
The Navy’s Naval Air Systems Command is seeking to sole-source the repair of a legacy T-400 riveter, asset number 65923043611, to Kell-Strom Tool Co. as the only known source capable of performing the complex, iterative repair process required. This unit demands a specialized troubleshooting methodology where faults are only revealed after prior issues are resolved, necessitating repeated test-and-repair cycles that typically involve custom fabrication or replacement of nearly all internal components to restore proper clamping, alignment, and riveting capabilities. Kell-Strom’s unique access to OEM-licensed technical data, proprietary tooling, and specialized test facilities makes it the only responsible contractor capable of meeting the demanding technical and timeline requirements. The work includes initial diagnostic inspection, ongoing serial repair cycles, component fabrication or procurement, and final calibration to meet original equipment manufacturer specifications. Deliverables include a fully restored and tested riveter, a detailed repair and fabrication summary documenting all faults and replacement parts, and a certified test report verifying compliance with P&WC OEM safety, precision, and performance standards. The solicitation, issued under number N68520-26-SIMACQ-JC00000-0250 with a response deadline of August 19, 2026, will be evaluated based on technical capability, price, and past performance. The place of performance is Cherry Point, North Carolina, and the contract falls under NAICS code 811310 with no set-aside designation. Primary point of contact is Daniel Collins of the Department of Defense, based at Patuxent River, Maryland.
Naval Air Systems Command

POSTED

about 12 hours ago

DEADLINE

in 14 days
View Details
NAICS: 811310
New
Federal
AIRFIELD LEAKING TRANSFORMER
Solicitation # 31125260000817
The contract requires the comprehensive removal and replacement of existing airfield lighting transformers at U.S. Coast Guard Base Cape Cod on Joint Base Cape Cod in Buzzards Bay, Massachusetts, with new units meeting precise technical specifications. The scope covers three primary transformers: two single-phase 37.5 KVA units from McGraw Edison—Transformer 413 near Building 614 and Runway 23, and Transformer 523 near Building 614 and Runway 14—and one three-phase 1500/1680 KVA unit from ABB, which was previously misidentified in the Statement of Work as Transformer 232177 but must now be replaced according to the corrected description: Transformer 138613, located adjacent to Building 3181 apron, with a 1000/1120 KVA rating, 4160GRDy/2400 high voltage, 480Y/277 low voltage, and 329 gallons of mineral oil. The contractor is responsible for verifying all existing transformer details, securing power, removing and disposing of old units at their own expense off-base, installing new transformers per manufacturer guidelines, and restoring full operational functionality with testing. Special attention is required for the ABB transformer regarding potential oil leaks, including thorough investigation and submission of replacement or repair feasibility analysis. An optional fourth transformer, a 15 KVA single-phase unit from Southeastern Transformer Co near Building 195 and Runway 5, is available for separate bid consideration. The contract imposes strict performance, safety, and compliance obligations. All work must be completed within 45 calendar days of the Notice to Proceed, with equipment delivered FOB destination. Personnel must be fully qualified, with skilled labor and on-site supervision that can read, write, and speak English, and who are authorized to approve minor changes under $2,000. Daily logs must be submitted weekly to the Contracting Officer’s Representative (COR), who also conducts inspections and final acceptance. The contractor must comply with NFPA 70, FAA regulations, OSHA standards, Joint Base Cape Cod fire and safety protocols, including mandatory hot work permits for welding or burning. Environmental and hazardous material rules apply: all displaced materials require proper documentation via bill of lading, landfill receipts, and recycler permits, and any hazardous substances used or encountered must be reported immediately to the COR with
Base Cape COD(00052)

POSTED

about 12 hours ago

DEADLINE

in 11 days
View Details
NAICS: 811310
New
Federal
41--COMPRESSOR,REFRIGER, IN REPAIR/MODIFICATION OF
Solicitation # N0010426RLC39
The contract pertains to the repair or modification of a refrigeration compressor with NSN 7H-4130-014695749, with a quantity of six units to be delivered FOB origin. The Government does not hold the data rights necessary to procure or contract for repairs from alternate sources, and it has been determined that acquiring such data or reverse engineering the part is uneconomical. Potential offerors must ensure that their product, service, or manufacturer meets all specified qualification requirements at the time of award, as mandated by FAR clause 52.209-1. Technical documentation such as Military and Federal Specifications, Qualified Products Lists, and Military Handbooks can be accessed through the DoD Single Stock Point via DAPS in Philadelphia or via the ASSIST-Online portal at http://quicksearch.dla.mil/, though drawings, patterns, and deviation lists are not available through these channels. Interested parties without internet access may contact the DODSSP Help Desk or mail requests to the DLA Document Services address. This procurement does not follow FAR Part 12 commercial item acquisition policies, but vendors may still propose commercial items within 15 days of this notice if capable of satisfying the requirement. The solicitation number is N0010426RLC39, with a response deadline of September 18, 2026, and the point of contact is Cody Smith of the Naval Supply Systems Command Weapon Systems Support, located in Mechanicsburg, Pennsylvania.
Navsup Weapon Systems Support Mech

POSTED

about 12 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 811310
New
Federal
Semi-Annual Walk-in Cooler Service in Parlier, California
Solicitation # 1232SA26Q1145
This solicitation, numbered 1232SA26Q1145, is a combined synopsis and solicitation for commercial items issued under FAR Part 12 to procure semi-annual maintenance and repair services for 33 walk-in coolers located at the USDA-ARS San Joaquin Valley Agricultural Sciences Center in Parlier, California. The contract is a total small business set-aside under NAICS code 811310, with a size standard of $12.5 million, and is open to all responsible small business sources. The work involves comprehensive HVAC maintenance, including inspection and cleaning of evaporator and condenser coils, refrigerant pressure and performance testing, system calibration, electrical component checks, compressor and defrost mode verification, door hardware inspection, fan blade cleaning, motor lubrication, and thorough cleanup after service. All equipment, materials, and supplies must be furnished by the contractor. The period of performance is one year, running from September 1, 2026, to August 31, 2027, with two semi-annual service visits scheduled during that timeframe. The acquisition is structured as a Firm-Fixed Price Purchase Order under a Lowest Price Technically Acceptable (LPTA) evaluation method, where technical acceptability and past performance are pass/fail gates, and award will be made to the lowest priced offer that meets all technical and performance requirements. An official site visit is mandatory and scheduled for August 6, 2026, at 9:00 AM local time at 9611 S. Riverbend Ave., Parlier, CA 93648, and will be the only opportunity for offerors to inspect the location. Quotations must include a detailed operational approach addressing each SOW requirement, pricing submitted as specified, and a signed copy returned to the issuing office. Submissions are due by 5:00 PM Central Daylight Time on August 14, 2026, with all questions due no later than August 7, 2026, directed to Kerrie Hodges at kerrie.hodges@usda.gov, and must include the solicitation number in the subject line. Offerors must hold firm pricing for 90 days after the submission deadline. The contractor must comply with multiple Federal Acquisition Regulation clauses, including 52.212-4 (Terms and Conditions for Commercial Services), 52.20
USDA Ars Afm Apd

POSTED

about 12 hours ago

DEADLINE

in 10 days
View Details
NAICS: 811310
New
SLED
Maintenance and Repairs for Cooling and Refrigeration Equipment at WMCI
Solicitation # 0032-N
Bidders must submit all questions regarding the Maintenance and Repairs for Cooling and Refrigeration Equipment at WMCI solicitation through the Public Purchase system by 2:00 p.m. Mountain Time on August 14, 2026; late questions will not be considered. All responses to the solicitation must be fully uploaded via the Public Purchase online system no later than 2:00:00 p.m. MT on August 21, 2026, and failure to complete the upload by this deadline will result in the submission being locked, deemed non-responsive, and excluded from evaluation. It is the sole responsibility of each bidder to regularly monitor the Public Purchase portal for responses to inquiries, addenda, award notices, or any other updates related to this solicitation, as the Wyoming Procurement Office will not communicate this information via email, phone, fax, or mail. All documents must be submitted in PDF, Excel, or Microsoft Office format. The solicitation is issued by the State of Wyoming through its General Services Division for services to be performed within Wyoming. Interested parties can register for free on Public Purchase using the step-by-step guide available at https://ai.wyo.gov/divisions/general-services/purchasing. Primary point of contact for inquiries is Brenda Crozier, reachable at (307) 777-6708 or brenda.crozier@wyo.gov.
State of Wyoming

POSTED

1 day ago

DEADLINE

in 17 days
View Details

More opportunities from Department Of The Interior → It Goods Fws

Same awarding agency