This Government Contract opportunity from Texas was posted on August 12, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Fire Safety & On-Site Fire Suppression

Closed

State & Local

Submission Closed09/03/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380

New

Joliet Job Corps-Request for Quote Asbestos Testing & Abatement

Solicitation # Joliet JCC Asbestos Testing & Abatement

Management & Training Corporation (MTC) is seeking quotes for a fee-for-service subcontract to provide asbestos testing and potential abatement services at the Joliet Job Corps center in Joliet, Illinois. The scope of work includes sampling and laboratory analysis of ceiling tiles in the Administration Academic Building and Welcome Center, as well as testing floor tiles in the Warehouse, Warehouse Storage Area, and Gymnasium. If asbestos-containing materials are confirmed, the contractor will be responsible for the removal and disposal of approximately 3,600 square feet of floor tile in the warehouse areas and 600 square feet in the gymnasium. All work must be performed by accredited laboratories and comply with federal, State of Illinois, OSHA, and EPA regulations. This opportunity is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified firms. Interested bidders must submit a bid sheet, a completed supplier packet containing a W-9 and self-certification, proof of insurance, and three references for similar projects by October 21, 2026. Award will be based on best value as determined by MTC. The contract is subject to Service Contract Labor Standards, specifically Wage Determination No. 2015-5019 Rev. 31, and requires subcontractors to obtain a Unique Entity Identification number. Key deliverables include a sampling plan, laboratory reports, waste shipment records, and a final project completion report.

POSTED

DEADLINE

Chemical Fume Hood and Biosafety Cabinet CertificationThis subcontract involves the annual certification and calibration of laboratory airflow containment systems for prime contractors working on Mississippi Department of Public Safety projects. The scope of work includes the testing and certification of 43 chemical fume hoods and 5 biosafety cabinets, utilizing specialized airflow anemometers and HEPA filter testing equipment. The selected provider is required to deliver formal certification reports and apply calibration stickers to all tested units. To qualify for this engagement, the contractor must hold ISO/IEC 17025 accreditation specifically covering field calibrations and airflow containment. The opportunity is categorized under NAICS code 541380, with a response deadline set for November 10, 2026.

MS DEPT of PUBLIC SAFETY

POSTED

DEADLINE

State Farm Agribusiness – Soil Samples and Analysis

Solicitation # QQ-129752

The Virginia Department of Corrections Division of Institutions is soliciting bids for soil sampling and analysis services to support State Farm Agribusiness. This project requires professional soil testing to ensure optimal agricultural productivity at the State Farm location in Virginia. Interested vendors must submit their responses by October 16, 2026, to be considered for the contract. The solicitation, identified as QQ-129752, is managed by Deborah Ayers. All prospective bidders should refer to the provided specifications and terms and conditions to ensure full compliance with the agency's requirements for soil analysis. The contract is categorized as a SLED organization procurement focused on maintaining the agricultural integrity of the state's farming operations.

DOC - Division of Institutions

POSTED

DEADLINE

First Article Testing and NDI Services for F100 ContainersThis subcontract involves providing specialized testing and inspection services for F100 containers under DLA Aviation at Oklahoma City. The scope of work requires the performance of dimensional inspections using NIST-traceable tooling, visual audits based on USAF standards, and non-destructive inspection methods such as X-ray or Dye Penetrant. The final deliverable for these services is a completed First Article Test Report. To ensure compliance and quality, the contractor must employ certified NDI technicians and adhere to ISO 10012-1 calibration standards. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense. Interested parties must submit their responses by November 12, 2026.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

Non-Destructive Testing (NDT) and Ultrasonic InspectionThis subcontract involves providing specialized non-destructive testing and ultrasonic inspection services for prime contractors supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. The scope of work includes performing dye penetrant inspections on valve body weld ends and ultrasonic inspections on starting materials, adhering to specific technical standards including T9074-AS-GIB-010/271, S9074-AR-GIB-010A/278, and MIL-STD-2132. A critical requirement for this contract is that the service provider must be an approved source for Critical Safety Item testing. The successful contractor is responsible for delivering certified NDT and Ultrasonic Inspection Reports. The opportunity is categorized under NAICS code 541380, with a response deadline set for November 9, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Steam Jacketed Kettle Hydrostatic TestingThis subcontract involves performing hydrostatic pressure testing for prime contractors on vessel repair projects managed by the Navsup Flc Sigonella Naples Office. The scope of work requires the use of hydrostatic pumps, pressure gauges, and testing manifolds to pressurize steam jacketed kettles with water to identify leaks and structural deformation. All activities must be conducted in strict accordance with Reference 65111-3-009 Rev A/1 and FAR 52.246-1. The selected provider is responsible for delivering a formal hydrostatic test report and a certification confirming the integrity of the kettles. This opportunity falls under NAICS code 541380 and is associated with the Department of Defense. Interested parties should note the response deadline of October 15, 2026.

Navsup Flc Sigonella Naples Office

POSTED

DEADLINE

Flight Critical Component NDT InspectionThe Flight Critical Component NDT Inspection subcontract involves providing independent non-destructive testing for prime contractors on DLA Aviation projects. The primary objective is to verify the structural integrity of regulating valves through a 100% inspection of critical characteristics. Approved testing methodologies include ultrasonic, radiographic, or liquid penetrant methods to ensure the highest safety and quality standards for flight critical components. To qualify, service providers must maintain ISO 9001 certification and employ technicians certified at NDT Level II or III. The successful contractor is responsible for delivering both certified NDT inspection reports and the certified components. This opportunity is managed by the Department of Defense through the Pa DLA Aviation At Philadelphia office under NAICS code 541380, with a response deadline of October 20, 2026.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Hydrostatic and Non-Destructive Testing (NDT)This subcontract for Navsup Weapon Systems Support Mech involves performing critical safety testing for prime contractors. The scope of work includes conducting hydrostatic testing according to drawing G985455 and non-destructive testing on weldments. All testing must be performed using calibrated gauges that comply with MIL-STD-45662 or ISO10012-1 standards. To be eligible, the provider must hold ISO/IEC 17025 accreditation. The contract requires the delivery of test certification reports in accordance with CDRL DI-MISC-S08678. This opportunity falls under NAICS code 541380 and is associated with the Department of Defense.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

NETA Certified Electrical Power Distribution System TestingThis SDVOSB sole source subcontract, managed by the Department of Veterans Affairs Network Contract Office 15, involves NETA Certified Electrical Power Distribution System Testing for medical center projects in Marion. The scope of work requires the maintenance, inspection, adjustment, and tri-annual electrical testing of critical infrastructure, including 325 electrical panels, 135 transformers, 220 switches, 6 generators, and 25 automatic transfer switches. To ensure compliance and safety, all work must be performed by NETA-certified technicians under the guidance of a Supervising Field Service Engineer. The project must strictly adhere to NETA 2019, NFPA 70E, and VHA Directive 1028 standards, with a requirement for the delivery of comprehensive maintenance and testing reports. The response deadline for this opportunity is November 9, 2026.

255-NETWORK Contract Office 15 (36C255)

POSTED

DEADLINE

First Article Testing and Certification ServicesThis subcontract for First Article Testing and Certification Services supports prime contractors on DLA Land Warren projects within the Department of Defense. The scope of work involves executing rigorous testing protocols for light-transmitting indicating panels to validate manufacturing processes in accordance with the Technical Data Package and FAR 52.209-3. Using precision measurement equipment, the contractor must verify that all hardware meets strict specifications and deliver a government-approved First Article Test Report. The project is categorized under NAICS code 541380 and will be performed in Warren. To ensure the highest level of quality and consistency, the contractor is required to adhere to ISO 9001:2015 quality standards. The solicitation was posted on October 9, 2026, with a response deadline of November 9, 2026.

POSTED

DEADLINE

Production Lot Testing and Inspection ServicesThis subcontract for Production Lot Testing and Inspection Services supports the Department of Defense through Navsup Weapon Systems Support Mech. The selected provider will perform technical testing and inspections for prime contractors to validate production lots, ensuring all work adheres to technical specifications and the 651AS drawing series. Key responsibilities include coordinating government-witnessed testing and maintaining strict compliance with DCMA QAR requirements and DD Form 1423. The primary deliverable for this engagement is an approved Production Lot Test/Inspection Report. Classified under NAICS code 541380, the opportunity was posted on October 9, 2026, with a response deadline of November 9, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Non-Destructive Testing (NDT) and Quality ValidationThis subcontract for Non-Destructive Testing (NDT) and Quality Validation supports DLA Aviation projects through the Department of Defense. The selected contractor will perform specialized inspection and testing to validate the structural integrity of Cold Section Modules for prime contractors. Required technical capabilities include the use of specialized equipment to conduct X-ray, Ultrasonic, Magnetic Particle, or Dye Penetrant inspections. To qualify, contractors must hold AS 9100 and ISO 9001:2000 certifications. Key deliverables for the project include detailed inspection reports, certifications of conformance, and validated Receiving Reports. The solicitation was posted on October 9, 2026, with a response deadline of November 12, 2026.

Ok DLA Aviation At Oklahoma City

POSTED

2 days ago

DEADLINE

in about 1 month

AI Contract Overview

This subcontract, titled Fire Safety and On-Site Fire Suppression, is issued by the Texas Operations-Floodway agency. The scope of work involves the provision of essential on-site fire safety equipment and personnel, specifically including water cans and sand under devices, as well as the coordination of brush trucks from the Fort Worth Fire Department to ensure comprehensive fire suppression capabilities. The solicitation was posted on August 12, 2026, with a response deadline of September 3, 2026. Classified under NAICS code 541380, this opportunity is managed through the OpenGov procurement portal for the specified agency.

General Info

Texas Operations-Floodway subcontract for fire safety equipment and personnel via Fort Worth Fire.

Agency

Texas → Operations- Floodway

NAICS

541380 - Testing Laboratories and Services

Place of Performance

TX, USA

Set-Aside

NONE

Documents

This scope was carved out of 26-160.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Fort Worth's Fourth Fireworks Display 2027

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedAug 12

subcontract

Response DeadlineSep 3

Deadline has passed

Submission Closed

09/03/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyTexas → Operations- Floodway

ContactsNo contacts available

OfficeN/A

Organization / AgencyTexas → Operations- Floodway

Office AddressN/A

ContactsNo contact information available

Full Description

Provision of on-site fire safety equipment and personnel, including water cans, sand under devices, and coordination with brush trucks from the Fort Worth Fire Department.

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS