Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Fire Suppression Installation

Active

International

Response Deadline10/15/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Ottawa Carleton District School Board is seeking a subcontractor for the installation of fire suppression systems at Half Moon Bay High School. The scope of work involves installing wet and dry pipe sprinkler systems, fire pumps, and standpipes utilizing fire-rated piping and backflow preventers. All installations must strictly adhere to NFPA 13 and NFPA 14 standards and obtain final approval from the Fire Marshal to ensure a fully certified fire suppression system. This subcontract opportunity was posted on September 23, 2026, with a response deadline of October 15, 2026. The project falls under NAICS code 238220 and requires the selected provider to coordinate with prime contractors to deliver a compliant and certified safety infrastructure for the educational facility.

General Info

Subcontractor needed for fire suppression system installation at Half Moon Bay High School.

Agency

Ottawa Carleton District School BoardView Agency

NAICS

238220 - Plumbing, Heating, and Air-Conditioning ContractorsView NAICS

Place of Performance

CAN

Set-Aside

NONE

Documents

This scope was carved out of 27-015.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Prime Mechanical Contractors - Half Moon Bay High School

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedSep 23

subcontract

Response DeadlineOct 15

Submission deadline

Response Deadline

10/15/2026, 07:00:00 PM UTCin 21 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyOttawa Carleton District School Board

ContactsNo contacts available

OfficeN/A

Organization / Agency

Ottawa Carleton District School Board

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installs fire sprinkler systems and fire protection equipment for prime contractors on Half Moon Bay High School construction projects. Installs wet/dry pipe sprinkler systems, fire pumps, and standpipes using fire-rated piping and backflow preventers. Requires compliance with NFPA 13 and NFPA 14 standards and Fire Marshal approval. Delivers a certified fire suppression system.

Similar Contracts

Same NAICS industry code

AAL-0880-02 HVAC and Electrical Upgrades Fairbanks

Solicitation # AAL-0880-02

Solicitation AAL-0880-02 involves HVAC and electrical upgrades at the Fairbanks FSS facility in Alaska, with an estimated construction magnitude between 250,000 and 500,000 dollars. The scope of work requires the replacement of the Fairbanks FSS chiller, four AC units, chilled-water piping, and all associated electrical systems. Key technical requirements include the modification of Panel P1 and HVAC circuits, as well as the provision of temporary and redundant cooling systems to maintain operations throughout the construction period. The project is scheduled for a proposed start date of April 15, 2027, and falls under NAICS code 238220. Final deliverables include system startup, testing, and commissioning, followed by FAA training, the completion of punch-list items, and formal project closeout. This presolicitation is set aside for various small business categories, including Small Disadvantaged Business, Women-Owned Small Business, HUBZone, and Veteran-Owned Small Business. Masanori Akers serves as the primary point of contact for interested firms.

PTSI Managed Services Inc.

POSTED

about 3 hours ago

DEADLINE

in about 5 hours

Replace HVAC Systems in the following buildings on our campus –1.) 1091 – Glazing/Welding/Heavy Mechanics Bldg

Solicitation # 26-140

This project involves the replacement of a failing 10-ton gas-fired packaged HVAC unit at the Atterbury Job Corps Center in Edinburgh, Indiana, specifically within Building 1091 (Glazing, HEO, Welding). The contractor must install a new 12.5 SEER packaged unit utilizing non-R22 refrigerants, such as R-410A or R-454B, while reusing existing electrical disconnects, ductwork, and thermostat wiring. Following installation, the old unit and any recovered refrigerant must be labeled and left at the maintenance building for parts. This is a single lump sum contract awarded based on best value, with evaluation weighted toward price (60 percent), quality (20 percent), past performance (10 percent), and schedule (10 percent). Eligible bidders must be registered in SAM.gov with a valid Unique Entity ID and hold a valid State of Indiana Contractor's License. Mandatory requirements include attendance at the pre-bid site visit, submission of a W9, a completed vendor questionnaire, and certification of compliance with Davis Bacon Act wage determinations. The selected contractor must provide a sequenced construction schedule within 10 days of the Notice to Proceed and start work within 14 days. Final acceptance is contingent upon a substantial completion walk-through, the submission of a completed SF 1413, certified payroll records, and a one-year workmanship guarantee. Payment terms are Net 30.

Adams & Associates, Inc.

POSTED

about 3 hours ago

DEADLINE

Inland Empire HVAC Tile & Landscape Trade

Solicitation # inland-empire-hvac-tile-landscape-trade

Inland Empire Job Corps

POSTED

about 3 hours ago

DEADLINE

CBP#3980 Cast Iron Replacement (Truth Dorm)

Solicitation # CBP#3980

Management & Training Corporation (MTC) is soliciting fixed-price, single lump sum bids for the replacement of damaged cast-iron sanitary piping at the Charleston Job Corps Center in West Virginia. The scope of work involves removing and replacing 4-inch no-hub cast-iron sanitary stacks and piping in Room H-121, with potential work in rooms H-136, H-138, H-140, and H-142. Key requirements include the installation of plastic debris barriers, the demolition of approximately 40 cinder blocks to access plumbing, and the restoration of walls to a paint-ready condition. The estimated price range for the project is between 25,000 and 100,000 dollars. Bids are due by October 5, 2026, and must be submitted via email to designated points of contact. The award will be based on best value. For bids equal to or exceeding 25,000 dollars, contractors must provide a bid bond guarantee of 20 percent of the base bid, and the awarded contractor will be required to provide performance and payment bonds for 100 percent of the contract price from a surety with at least an A- rating. Submission requirements include a detailed cost breakout, three comparable project references, proof of insurance, and a completed MTC Supplier Packet. Compliance is mandatory with the Davis-Bacon Act and Construction Wage Rate Requirements for Kanawha County, West Virginia. The opportunity is open to various small business set-asides, including SDB, WOSB, HUBZone, VOSB, and SDVOSB. Contractors must provide a 12-digit Unique Entity ID and a 9-digit Tax ID. Additionally, first-tier subcontractors with awards exceeding 30,000 dollars must disclose their debarment status per FAR 52.209-6, and all construction contractors must submit an SF 1413 Statement and Acknowledgement form.

Management & Training Corporation

POSTED

about 3 hours ago

DEADLINE

Replace HVAC Systems in the following buildings on our campus –1.) ABL Dormitory

Solicitation # 26-141

Adams & Associates, Inc. is soliciting lump sum bids for the replacement of HVAC systems at the Atterbury Job Corps Center in Edinburgh, Indiana, specifically within the ABL Dormitory. The project requires replacing existing R-22 Bryant air-cooled condensing units and compatible coils with new 12.5 SEER packaged units utilizing non-R22 refrigerants, such as R-410A or R-454B. The scope of work includes the installation of these units while reusing existing ductwork, thermostat wiring, and electrical disconnects. All recovered refrigerant must be labeled and left on-site for the center's use. Work must commence within 14 days of the Notice to Proceed, and a sequenced construction schedule must be submitted within 10 days of that notice. Award will be based on best value, evaluating price (60 points), quality (20 points), past performance (10 points), and schedule (10 points). Mandatory requirements for bidders include a valid Unique Entity ID and active SAM.gov registration, a valid State of Indiana contractor's license, and compliance with Davis Bacon Act wage determinations. Bidders must provide proof of automobile liability and workers' compensation insurance, naming Adams and Associates, Inc. as an additional insured. Proposals must be submitted on company letterhead and include a detailed cost breakdown, a timeline for substantial completion, and a 90-day bid guarantee. Final payment is contingent upon the submission of certified payroll records, a completed SF 1413, and the release of liens from all subcontractors and suppliers.

Adams & Associates, Inc.

POSTED

about 3 hours ago

DEADLINE

CBP#9772 HVAC Air Handling Unit (AHU) and Ductwork Cleaning Services

Solicitation # CBP#9772

Management & Training Corporation (MTC) is soliciting bids for a fixed-price, lump sum subcontracting opportunity, CBP#9772, to provide comprehensive cleaning of HVAC air distribution systems at the Edison Job Corps center in Edison, New Jersey. The scope of work involves the cleaning of twelve air handling units (AHUs) and their associated components, including vacuuming, mechanical brushing, and the thorough cleaning of all accessible heating and cooling coils. The project is estimated to be valued between $100,000 and $250,000. Bids are due by October 16, 2026, at 3:00 PM EST and must be submitted via email to the designated points of contact. Award will be based on overall best value, with a mandatory requirement for bidders to conduct a physical site visit and sign an attendance roster prior to submission. For bids equal to or greater than $25,000, a bid bond of 20% of the base bid is required, and the awarded contractor must provide performance and payment bonds from a surety company with at least an A- rating. The contractor must comply with the Davis-Bacon Act and the specific wage determination for Middlesex County, New Jersey, providing weekly certified payroll reports. Additional requirements include the submission of a detailed cost breakout, a UEI number for federally funded project compliance, and adherence to OSHA 30 CFR 1929 safety standards. Payment is contingent upon the submission of a Schedule of Values and the successful completion of a final inspection by MTC.

Management & Training Corporation

POSTED

about 3 hours ago

DEADLINE

Replace HVAC Systems in the following buildings on our campus –1.) ABL Dormitory

Solicitation # 26-141

Adams and Associates, Inc., operating for the U.S. Department of Labor, is soliciting a single lump sum contract to replace HVAC systems at the Atterbury Job Corps Center in Indiana, specifically within the ABL Dormitory. The project involves replacing existing R-22 Bryant air-cooled condensing units and coils serving common areas and dormitory Wings A, B, C, and D with new 12.5 SEER packaged units utilizing non-R22 refrigerants such as R-410A or R-454B. The contractor is required to reuse existing electrical disconnects, ductwork, and thermostat wiring, while ensuring all recovered refrigerant is labeled and left on-site. The award will be based on best value, evaluating price (60 points), quality (20 points), past performance (10 points), and schedule (10 points). Eligible bidders must be registered in SAM.gov with a valid Unique Entity ID and hold a valid State of Indiana contractor's license. A mandatory site visit was scheduled for September 23, 2026, with proposals due by October 5, 2026. Requirements include a one-year workmanship guarantee, adherence to EPA and OSHA regulations, and compliance with Davis Bacon Act wage rates. Final payment is subject to net 30 terms and requires the submission of a completed SF 1413, certified payroll records, and lien releases. Contractors must also provide specific automobile and workers' compensation insurance, naming Adams and Associates, Inc. as an additional insured.

Adams & Associates, Inc.

POSTED

about 3 hours ago

DEADLINE

AAL-0810-01 Sitka (SIT) Flight Service Station (FSS) Fire Esc

Solicitation # AAL-0810-01

Solicitation AAL-0810-01 is a design-build construction project for the Sitka Flight Service Station in Sitka, Alaska. The scope of work involves the design and construction of an access stair platform serving the third floor of the facility. The comprehensive project requirements include conducting a site survey, obtaining necessary permits, developing the final design, executing construction, performing inspections, completing the punch-list, and providing final as-built drawings. The estimated magnitude of construction for this effort is between 250,000 and 500,000 dollars, with a proposed start date of February 1, 2027. This opportunity is designated as a set-aside for various small business categories, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, and Veteran-Owned Small Businesses. The project is managed by PTSI Managed Services Inc. and falls under NAICS codes 238220 and 238190.

PTSI Managed Services Inc.

POSTED

about 3 hours ago

DEADLINE

in about 5 hours

WOJC - Buried Domestic Hot Water (DHW) Pipe Repair

Solicitation # WOJC – Buried Domestic Hot Water (DHW) Pipe Repair

Education and Training Resources is seeking quotes for a subcontracting opportunity to repair a compromised buried domestic hot water pipe at the Westover Job Corps Center in Chicopee, Massachusetts. The scope of work requires the contractor to provide all labor, materials, and supervision to excavate a trench approximately 15 linear feet long and 8 feet deep, remove and repair up to 10 linear feet of piping with a diameter up to 4 inches, and install insulation on the new piping. The project includes a one-year equipment and workmanship warranty, and the contractor is responsible for repairing any facility damage caused during performance at no additional cost. Bids are due by 4:00 PM on October 2, 2026, and a site walkthrough is scheduled for September 23, 2026. To be considered, offerors must submit a completed bid sheet with a detailed cost breakdown, a proposed service schedule, Massachusetts licensing and credentials, and required administrative documents including a W-9, Vendor Acknowledgement Form, and certificates of insurance. Winning bidders must possess an active SAM.gov registration and a Unique Entity ID. The award will be based on the sole judgment of ETR rather than the lowest bid. Compliance requirements include adherence to the Davis-Bacon Act, Service Contract Act, and various FAR clauses regarding anti-lobbying and debarment, as well as the submission of weekly certified payroll reports.

Westover Job Corps Center

POSTED

about 3 hours ago

DEADLINE

DORM DUCT & EXHAUST FAN CLEANING

Solicitation # WL - 26 - 008

Solicitation WL-26-008 is a request for a single lump sum contract to perform cleaning of bathroom exhaust ducts and exterior roof-mounted exhaust fans for four dorms at the Woodland Job Corps Center in Laurel, Maryland. Operated by Adams and Associates, Inc. for the U.S. Department of Labor, the project requires the selected vendor to be registered in SAM.gov and provide a valid W-9, a Maryland contractor's license, and specific insurance coverages, including automobile liability and workers' compensation. The award will be based on best value, evaluating price (60 points), quality (20 points), past performance (10 points), and the proposed schedule (10 points), noting that the lowest price does not guarantee an award. The contractor must comply with EPA and OSHA regulations, with Maryland state laws prevailing if they are more stringent than federal requirements. Key deliverables include a sequenced construction schedule due within 10 days of the Notice to Proceed, a one-year guarantee of workmanship, and a two-year warranty if roofing work is involved. Final acceptance is contingent upon a substantial completion walk-through and the resolution of all punch list items within 14 days. Proposals are due by October 9, 2026, and must include certification of conformance to the latest local wage rate decisions. Payment terms are set at Net 30.

Adams & Associates\Woodland Job Corps Center

POSTED

about 3 hours ago

DEADLINE

CBP6404 Bldg. 63B Drain Replacement

Solicitation # CBP6404

San Diego Job Corps Center

POSTED

about 3 hours ago

DEADLINE

IGSA Sprinkler Maintenance And Repair Job Order Contract

Solicitation # 20260924006

City of Monterey

POSTED

about 3 hours ago

DEADLINE

More opportunities from Ottawa Carleton District School Board

Same awarding agency

Mechanical Equipment SupplierThis subcontract agreement with the Ottawa Carleton District School Board involves the procurement and delivery of heavy mechanical machinery for construction projects at Half Moon Bay High School. The supplier is responsible for providing industrial HVAC units, commercial boilers, chillers, pumps, and large-scale air handling units, all of which must be UL listed and include manufacturer warranties. The solicitation was posted on September 23, 2026, with a response deadline of October 15, 2026. Operating under NAICS code 423410, the selected supplier will ensure all specified mechanical equipment is delivered to the project site to support the prime contractors.

Photographic Equipment and Supplies Merchant Wholesalers

POSTED

about 22 hours ago

DEADLINE

Building Management System (BMS) / Controls InstallationThis subcontract for the Ottawa Carleton District School Board involves the installation of mechanical controls and automation systems for construction projects at Half Moon Bay High School. The scope of work includes the deployment of sensors, controllers, wiring, and software to create an integrated Building Automation System using Programmable Logic Controllers for the management of temperature and airflow. Qualified providers must hold manufacturer-specific certifications and LEED certification where applicable. The solicitation was posted on September 23, 2026, with a response deadline of October 15, 2026. The project falls under NAICS code 238210.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 22 hours ago

DEADLINE

Plumbing and Sanitary InstallationThe Ottawa Carleton District School Board is seeking a subcontractor for the Plumbing and Sanitary Installation project at Half Moon Bay High School. The selected contractor will be responsible for installing potable water, sanitary waste, and vent piping systems, including both rough-in and finish plumbing for kitchens, science labs, and restrooms. Key deliverables include the installation of pumps, water heaters, and fixtures utilizing copper and PVC piping to ensure a fully functional water and waste disposal system. To qualify for this subcontract, the provider must hold a Master Plumber license and ensure all work strictly adheres to the Plumbing Code. Interested parties must submit their responses by October 15, 2026. This project falls under NAICS code 238220 and is managed by the Ottawa Carleton District School Board.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 22 hours ago

DEADLINE

HVAC Installation (Heating, Ventilation, and Air Conditioning)This subcontract for the Ottawa Carleton District School Board involves the installation and commissioning of comprehensive climate control and ventilation systems for construction projects at Half Moon Bay High School. The scope of work includes the installation of ductwork, air handling units, VAV boxes, rooftop units, thermostats, boilers, chillers, and heat pumps, utilizing sheet metal ducting and refrigerant piping. The selected provider must hold necessary HVAC certifications and ensure all work adheres to ASHRAE standards and local building codes to deliver a fully operational system. This opportunity was posted on September 23, 2026, with a response deadline of October 15, 2026, falling under NAICS code 238220.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 22 hours ago

DEADLINE

Prime Mechanical Contractors - Half Moon Bay High School

Solicitation # 27-015

The Ottawa Carleton District School Board is issuing solicitation 27-015 to establish a list of prequalified Prime Mechanical Contractors for the construction of the new Half Moon Bay High School in Ottawa. This process aims to identify contractors with extensive experience in coordinating complex mechanical projects that integrate HVAC, plumbing, and gas piping requirements. Interested parties must submit their responses by the deadline of October 15, 2026, at 7:00 PM. Once prequalified, these contractors will be available for selection by General Contractors overseeing the high school project.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 22 hours ago

DEADLINE

CNC Installation and Training ServicesThe CNC Installation and Training Services subcontract with the Ottawa Carleton District School Board involves the delivery, technical setup, and calibration of CNC machines for school projects within the Supply Chain Management Division. The selected provider is responsible for the physical installation of equipment at designated school sites and must ensure all machines are fully operational. Beyond installation, the contract requires the provision of comprehensive operator training for both staff and students, as well as ongoing after-sales technical support. The provider must strictly adhere to the District's insurance and indemnity requirements to ensure compliance throughout the execution of the project.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

CNC Machine Equipment SupplierThis subcontract with the Ottawa Carleton District School Board involves the supply of desktop CNC machines for prime contractors working on Supply Chain Management Division school projects. The required equipment must feature fully enclosed designs with 12 by 12 inch cutting areas, rigid aluminum construction, and 1HP air-cooled spindles capable of reaching 24,000 RPM. Each unit must be compatible with AC 110V power and include a rotary axis, ER11 collets, and touch-off tools as per the mandatory specification sheets. The supplier is responsible for delivering the CNC machines along with all necessary technical specification sheets. This opportunity was posted on September 18, 2026, with a response deadline of October 13, 2026. The contract falls under NAICS code 423830.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

CNC Machines - Standing Agreement

Solicitation # 27-012

The Ottawa-Carleton District School Board is seeking a vendor to establish a standing agreement for the supply and delivery of CNC machines on an as and when needed basis. The scope includes three specific equipment options: fully enclosed desktop machines with a 12 by 12 inch cutting area, classroom/small shop machines with a 24 by 12 inch area, and larger woodworking shop units with 4-axis capability. All provided equipment must be CSA-compliant and include all-inclusive pricing covering delivery, installation, set-up, training, and after-sales support. Delivery is required within thirty days of payment. The solicitation process follows a four-stage evaluation consisting of mandatory submission requirements, technical and non-price rated criteria, pricing, and final ranking. The contract is awarded to the compliant bidder with the highest ranking, with the lowest price serving as the tie-breaker. Selected vendors must adhere to strict safety and accessibility standards, including the Accessibility for Ontarians with Disabilities Act and WSIB clearance. The contract term is scheduled to begin on November 1, 2026, with submissions due by October 13, 2026, via the electronic bidding portal.

Machine Tool Manufacturing

POSTED

DEADLINE

Industrial Steel Material SupplyThe Industrial Steel Material Supply subcontract, issued by the Ottawa Carleton District School Board, involves the sourcing and delivery of raw steel materials for prime contractors working on District facility projects. The scope of work includes providing structural steel, beams, plates, piping, and sheet metal, which must be delivered either to fabricators or directly to District sites. To ensure compliance with fabrication standards, the supplier is required to provide all necessary material certifications and mill test reports. This opportunity is categorized under NAICS code 423510 and was posted on September 3, 2026. Interested parties must submit their responses by the deadline of September 24, 2026.

Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

DEADLINE

On-Site Welding and Repair ServicesThe Ottawa Carleton District School Board is seeking a subcontractor for on-site welding and repair services across approximately 150 district facility locations. The scope of work involves the repair of steel structures, railings, and playground equipment, utilizing mobile welding rigs and portable equipment to deliver certified repairs in-situ. Interested parties must submit their responses by September 24, 2026. A valid WSIB coverage clearance certificate is a mandatory requirement for this contract.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Custom Steel FabricationThe Ottawa Carleton District School Board is seeking a subcontractor for custom steel fabrication to support prime contractors on District facility projects. The scope of work involves the construction of fabricated steel ladders, platforms, and custom machine guards or coverings, utilizing a professional fabrication shop equipped with welding and cutting tools. The selected provider is responsible for the delivery of all completed components to the designated District sites. This subcontract opportunity is identified under NAICS code 332312. A critical requirement for the provider is the possession of a valid WSIB coverage clearance certificate. The solicitation was posted on September 3, 2026, and the deadline for responses is September 24, 2026.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Welding, Fabrication and Repair Services - RFSA

Solicitation # 27-002

The Ottawa-Carleton District School Board has issued Request for Standing Agreement 27-002 for the provision of welding, fabrication, and repair services on an as and when required basis. The scope of work includes the custom manufacture of machine guards, coverings, steel ladders, and platforms, as well as general repairs to metal infrastructure such as railings, goal posts, and playground equipment. Services may be performed at the contractor's facility or on-site across approximately 150 district locations. The agreement is scheduled to end on September 30, 2027, with options for two one-year extensions. Eligible bidders must maintain a storefront or office within 75 kilometers of 133 Greenbank Road. Evaluation is conducted in three stages: a compliance review of mandatory requirements, a technical assessment where bidders must score at least 75 percent on non-price rated criteria, and a final pricing evaluation. Key technical requirements include the possession of four Canadian Welding Bureau certificates. Contractors must strictly adhere to Hot Works Permit guidelines, including a mandatory final inspection 30 minutes after job completion, and comply with Ontario Regulation 278/05 and accessibility standards such as the AODA. The contract will be awarded to the compliant bidder with the highest overall evaluation ranking. Invoicing must be submitted electronically with detailed descriptions and purchase order numbers, with standard payment terms of net 30 days. Suppliers are required to provide WSIB clearance certificates and indemnify the district against losses or claims. All submissions must be made electronically via the ocdsb.bidsandtenders.ca portal by the deadline of September 24, 2026.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS