Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on October 31, 2022. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Hardness & Tensile Tester Calibration and Maintenance

Awarded
FA8126-23-P-0007Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310
New
SLED
Bus Fire Suppression System Maintenance
Solicitation # WMATA-0000010906
The Washington Metropolitan Area Transit Authority is seeking proposals for the maintenance of bus fire suppression systems under solicitation number WMATA-0000010906. This procurement falls under NAICS code 811310 and is managed through the agency's Virginia operations. The solicitation was posted on October 29, 2026, and requires all responses to be submitted by the deadline of November 4, 2026. Interested parties can access further details and submission portals through the official WMATA supplier link.
Washington Metropolitan Area Transit Authority

POSTED

about 6 hours ago

DEADLINE

in 6 days
NAICS: 811310
New
Kubota M8200 Clutch Replacement
Solicitation # kubota-m8200-clutch-replacement
Management & Training Corporation (MTC) is soliciting bids for the clutch replacement of a Kubota M8200 tractor with front wheel assist, no cab or loader, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires the contractor to provide all transportation, labor, supervision, tools, and new manufacturer-specified parts to diagnose and repair the clutch assembly and power take-off (PTO) system. Key technical requirements include disassembling tractor components, replacing friction discs, bearings, oil seals, and O-rings, resurfacing the flywheel, and replacing hydraulic pipes and filters as necessary. The project is complete once the Facility Maintenance Department verifies proper clutch engagement and PTO operation under load. This is a small business set-aside opportunity under NAICS code 811310, open to various SBA-certified categories including VOSB, SDVOSB, WOSB, and HUBZone businesses. Proposals must be submitted via email to Angie Mahoney by November 3, 2026, and must include a lump sum bid sheet, a completed supplier packet with a W-9 and self-certification form, and proof of insurance. Award will be based on best value, considering the contractor's qualifications, experience, and the itemized cost breakdown. The contract is subject to Federal Acquisition Regulation (FAR) clauses regarding the Buy American Act, combating trafficking in persons, and Service Contract Labor Standards per Wage Determination No. 2015-4687 Revision 31 for Kentucky.
Earle C. Clements Job Corps Center

POSTED

about 6 hours ago

DEADLINE

in 5 days
NAICS: 811310
New
SLED
**Certified SB/DVBE Only** IFPQ Boiler Inspection, Maintenance, Repair, Testing, and Reporting in Los Angeles County
Solicitation # 07A6539
The California Department of Transportation (Caltrans) is soliciting price quotes for an Invitation for Price Quote (IFPQ 07A6539) to provide comprehensive boiler inspection, maintenance, repair, testing, and reporting services at the District 7 Office facility in Los Angeles, California. The scope of work includes annual and quarterly preventative maintenance for three Unilux water tube boilers and six boiler pumps, ensuring compliance with manufacturer standards, ASME Code, OSHA requirements, and South Coast Air Quality Management District standards. This is a set-aside solicitation exclusively for certified Small Business (SB), Microbusiness (MB), or Disabled Veteran Business Enterprise (DVBE) entities. The contract will be awarded to the responsible bidder offering the lowest price quote who meets all specifications. Key operational requirements include a 48-hour response time for routine service requests and a strict prohibition on subcontracting any portion of the work. The contractor must adhere to State General Prevailing Wage Rates for Los Angeles County and provide a payment bond for any service request exceeding 25,000 dollars. Required submission documents include a Price Quote Proposal, Bidder Certification Sheet, Non-Collusion Declaration, and certifications for California Civil Rights Laws and the Darfur Contracting Act. Invoicing is conducted monthly in arrears and must be accompanied by certified payroll records and DVBE utilization reports. The agreement is subject to a budget contingency clause, meaning it is enforceable only if sufficient funds are provided by the California State Legislature or the United States Government.
California Department of Transportation

POSTED

about 7 hours ago

DEADLINE

in 15 days
NAICS: 811310
New
SLED
Wheelchair Lift and Accessibility EquipmentThis subcontract focuses on the maintenance and repair of specialized accessibility equipment for special needs bus projects managed by the Clayton County Board of Education in Georgia. The scope of work involves the inspection, repair, and certification of wheelchair lift systems, specifically targeting hydraulic lift components and safety sensors to ensure all equipment is operational and safe. To qualify for this engagement, providers must hold OEM Industry Certification and strictly adhere to ADA compliance standards. The project is categorized under NAICS code 811310, with a response deadline set for December 3, 2026.
Clayton County Board of Education

POSTED

about 7 hours ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
Extended Warranty Package Provision
Philadelphia Gas Works

POSTED

about 10 hours ago

DEADLINE

in 22 days
NAICS: 811310
New
International
Chlorine Evaporator Maintenance and Inspection ServicesThis subcontract opportunity with the Ontario Clean Water Agency involves providing annual maintenance and detailed technical inspections of chlorine evaporators and related chlorinator services. The selected supplier will be responsible for utilizing specialized equipment to service evaporator units and must possess qualified status for the handling of hazardous materials. All work must culminate in the delivery of comprehensive annual maintenance and inspection reports. The project is based in Canada and falls under NAICS code 811310. Interested parties must submit their responses by the deadline of November 27, 2026. This contract is designed for suppliers capable of supporting prime contractors on OCWA projects through specialized technical expertise in chlorination systems.
Ontario Clean Water Agency

POSTED

about 10 hours ago

DEADLINE

in 29 days
NAICS: 811310
New
SLED
Air Compressor Preventive and Corrective Maintenance
City of Roseville

POSTED

about 11 hours ago

DEADLINE

in about 2 months
NAICS: 811310
New
SLED
RFP 07-135 Roseville Electric Utility – Air Compressor Maintenance
Solicitation # 07-135
The City of Roseville is soliciting proposals under RFP 07-135 for a consultant to provide comprehensive scheduled preventive and corrective maintenance for air compressors and auxiliary systems, including Ingersoll Rand equipment. The services will be performed at the Roseville Energy Park and Sunset Energy Center in California. The selected consultant will be responsible for providing all necessary labor, technical expertise, specialized tooling, and materials. This is a prevailing wage project with an initial contract duration of five years, estimated to commence in April or May. Proposals must be submitted by December 16, 2026, via email to the City Clerk or through physical delivery in a sealed container with the required Attachment H label. The award will be based on a formal evaluation panel process considering the firm's experience and qualifications (25 points), the proposed project plan (35 points), and cost (40 points), with potential interviews for top candidates. Requirements for the successful bidder include obtaining a City of Roseville business license, providing 100% faithful performance and labor and materials bonds, and maintaining specific insurance policies. Consultants must also disclose any conflicts of interest and adhere to the Levine Act regarding political contributions.
City of Roseville

POSTED

about 11 hours ago

DEADLINE

in about 2 months
NAICS: 811310
New
SLED
Specialized Heat Exchanger Maintenance (Preventive & Corrective)
City of Roseville

POSTED

about 11 hours ago

DEADLINE

in about 2 months
NAICS: 811310
New
SLED
Compressor Auxiliary Systems Maintenance
City of Roseville

POSTED

about 12 hours ago

DEADLINE

in about 2 months
NAICS: 811310
New
SLED
Gas Packager Compressor Maintenance Services
City of Roseville

POSTED

about 12 hours ago

DEADLINE

in about 2 months
NAICS: 811310
New
SLED
Ariel Gas Compressor Maintenance Services
City of Roseville

POSTED

about 12 hours ago

DEADLINE

in about 2 months

AI Contract Overview

Show more

Contract FA8126-23-P-0007 was awarded as a sole source to Instron, a division of Illinois Tool Works, Inc., for the calibration and preventive maintenance of Hardness and Tensile Testers. The agreement is managed by the Department of Defense through the AFSC PZIMB office located at Tinker Air Force Base in Oklahoma. The award was justified based on Instron's status as the Original Equipment Manufacturer, providing them with exclusive proprietary data rights and a workforce of certified technicians necessary for the specialized maintenance of the equipment. The total estimated value of the contract is 121,965.38 dollars, covering a five-year performance period consisting of one base year and four option years. Classified under NAICS code 811310, the contract ensures the continued operational accuracy and reliability of critical testing hardware at the Tinker AFB place of performance.

General Info

Agency

Department Of Defense → FA8126 Afsc Pzimb

Contract Value

$138,360

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

Tinker AFB, OK, 73145, USA

Set-Aside

NONE

Awardee

ILLINOIS TOOL WORKS INC

Award Issued Date

Documents

1

Sole Source Justification for Serv M22-044 Hardness and Tensile Tester Calibration and PM

PDF, Low priorityjustification-and-authorization
Low

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded
Posted

Award Notice

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA8126 Afsc Pzimb
Contacts2 people available
OfficeTINKER AFB, OK, 73145-3305, USA
Organization / AgencyDepartment Of Defense → FA8126 Afsc Pzimb
Office AddressTINKER AFB, OK, 73145-3305, USA
Contacts
Brad Bonsall
contact@example.gov
Alicia McGill
contact@example.gov

Full Description

Show more
FA8126-23-P-0007 was awarded Sole Source to Instron, a division of Illinois Tool Works, Inc.

More opportunities from Department Of Defense → FA8126 Afsc Pzimb

Same awarding agency

NAICS: 423830
New
Federal
Trumpf/Pilz OEM Replacement Parts SupplierThis subcontract involves the supply of Original Equipment Manufacturer components for prime contractors supporting Air Force Sustainment Center projects. The scope specifically requires the sourcing of Trumpf interface components and Pilz safety modules in accordance with established TT&E reports, with all certified parts to be delivered to Tinker AFB. The agreement mandates strict adherence to military standards, specifically MIL-STD-130 for unique item identification and MIL-STD-129 for packaging and shipment labeling. Managed under NAICS code 423830 for the Department of Defense, the contract ensures that all critical safety and interface hardware meets rigorous government specifications for sustainment operations.
Industrial Machinery and Equipment Merchant Wholesalers

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 811210
New
Federal
Pilz Safety Controller Reprogramming ServicesThis subcontract for Pilz Safety Controller Reprogramming Services supports prime contractors on Air Force Sustainment Center projects under the Department of Defense. The scope of work involves the specialized programming and configuration of integrated Pilz safety controllers, specifically focusing on validation and integration with Trumpf TrumaBend V170X hardware. Key technical requirements include conducting Test, Teardown, and Evaluation (TT&E) and the recovery of lost original programs using proprietary Pilz software. The selected provider must ensure strict adherence to DFARS 252.204-7012 compliance standards. Final deliverables for the project consist of a fully programmed controller and a comprehensive TT&E evaluation report. The opportunity is categorized under NAICS code 811210, with a response deadline of November 6, 2026.
Electronic and Precision Equipment Repair and Maintenance

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 811210
New
Federal
Trumpf Pilz Programming Service
Solicitation # FA812627Q0003
The Air Force Sustainment Center at Tinker Air Force Base, Oklahoma, is seeking a Firm-Fixed-Price contract for a one-time programming service to reprogram and configure the integrated Pilz safety controller for a Trumpf TrumaBend V170X, serial number B0105A0093. The contractor is required to perform Test, Teardown, and Evaluation on the part and submit an evaluation report to the government within one business day. The period of performance for this service is scheduled from November 15, 2026, to November 14, 2027. Award decisions will be based on a technical proposal and cost/price evaluation, with a 10 percent price preference granted to HUBZone small business concerns. The contractor must comply with strict packaging and marking standards, including MIL-STD-130 for unique item identification and MIL-STD-129 for shipment labeling. Additionally, the contractor must adhere to cybersecurity reporting under DFARS 252.204-7012 and provide all necessary quality control and inspection manuals. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system.
Electronic and Precision Equipment Repair and Maintenance

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 541380
Federal
Independent Calibration & Certification Services (Future Potential)The contract pertains to independent calibration and performance certification of electron microscopes using traceable standards, intended for potential future use should the government elect to pursue depot-level maintenance or open the requirement to competition. This service is critical to ensuring the accuracy and reliability of electron microscope operations, with all calibrations tied to nationally or internationally recognized traceable standards to guarantee measurement integrity. The work is linked to a NAICS code of 541380, indicating it falls under scientific and technical consulting services, and is managed by the Department of Defense under the office FA8126 Afsc Pzimb, with performance expected to occur in the 73145 zip code area. Although currently listed as a subcontract opportunity with no solicitation number or set-aside details, it remains a pending requirement that may be activated based on future maintenance strategies or competitive bidding decisions.
Testing Laboratories and Services

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 541715
Federal
On-Site Technical Support for Precision Laboratory InstrumentsThe contract is for on-site technical support services focused on high-maintenance scientific instruments located at government facilities, with a primary emphasis on emergency repairs, troubleshooting, and performance validation. Services are required to be provided on-call and in-person to ensure continuous operational readiness of precision laboratory equipment critical to defense-related research and testing activities. The work is governed under NAICS code 541715, indicating it falls under scientific research and development services, and is structured as a subcontract within the broader framework of the Department of Defense’s procurement system. The place of performance is identified as a facility in Oklahoma City, Oklahoma, with a ZIP code of 73145, suggesting the support must be delivered directly at that location. The contract was posted on July 28, 2026, and is managed under the FA8126 Afsc Pzimb office, indicating oversight by a U.S. Air Force contracting entity. While no solicitation number is provided, the UI link directs to the SAM.gov portal for official documentation and submission purposes. The requirement implies a high degree of technical expertise, rapid response capability, and clearance to work in secure government environments. There is no set-aside designation specified, meaning participation is open to all qualified contractors without restrictions based on size or socioeconomic status. All support must meet stringent standards for instrument accuracy, safety, and uptime to sustain mission-critical operations.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 334517
Federal
High-Precision Diagnostic Equipment Parts SupplyThe contract entails the supply of authentic, JEOL-certified replacement and maintenance parts for the JSM-IT300LV scanning electron microscope, covering critical components such as electron optics, vacuum seals, detectors, and control boards, ensuring continued operational integrity and performance fidelity. All parts must meet stringent quality and authenticity standards as validated by JEOL, with delivery and installation aligned to support uninterrupted use in high-precision diagnostic applications. Performance is required at a location with ZIP code 73145, under the oversight of the Department of Defense’s FA8126 Afsc Pzimb office, and the contract is classified as a subcontract within the NAICS code 334517 for other electronic instrument manufacturing. The posting date indicates the opportunity was issued in 2026, and though no solicitation number is provided, the official listing can be accessed through the SAM.gov platform via the specified URI. The agreement emphasizes compliance with certified OEM specifications to maintain system calibration, safety, and resolution standards critical to defense-related research and analysis.
Irradiation Apparatus Manufacturing

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 811210
Federal
OEM Preventative Maintenance & Calibration ServicesThe contract entails biannual on-site preventative maintenance and calibration services for a JEOL JSM-IT300LV scanning electron microscope, performed using proprietary tools, specialized software, and authentic original equipment manufacturer parts to guarantee optimal performance, measurement accuracy, and long-term reliability. All service activities must be conducted at the designated location in Oklahoma City, with a zip code of 73145, ensuring minimal downtime and uninterrupted operational readiness for critical applications. Services are provided under a subcontract classification within the NAICS code 811210, which pertains to electronic equipment repair and maintenance, and are managed by the Department of Defense through the FA8126 Afsc Pzimb office. The work is scheduled to occur twice per year on a fixed cycle, with compliance and quality control ensured through adherence to manufacturer-specified protocols and the exclusive use of OEM components. The contract was posted on July 28, 2026, and all servicing must align with the technical requirements specified by the equipment manufacturer to maintain system precision and warranty integrity.
Electronic and Precision Equipment Repair and Maintenance

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 541611
Federal
Technical Documentation and Reporting ServicesThis contract, titled Technical Documentation and Reporting Services, is a small business set-aside subcontract under the SBA Total Small Business Set-Aside program, with a NAICS code of 541611 for Management Consulting Services. The work involves preparing and submitting detailed service reports, compliance documentation, and certified technician credentials, while also managing electronic invoicing through the Wide Area Workflow system and maintaining complete, audit-ready records to ensure full regulatory adherence. Performance is required at the location in Coffeyville, Kansas, with a zip code of 73145, and the contract is associated with the Department of Defense, specifically under the agency identifier FA8126 Afsc Pzimb. The opportunity was posted on July 28, 2026, and bidders must be designated as small businesses to qualify, with all submissions and recordkeeping expectations aligned with federal compliance standards.
Administrative Management and General Management Consulting Services

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 423490
Federal
Supply of OEM Replacement Parts for SEMThe contract is a total small business set-aside under the SBA program for the supply of genuine JEOL or approved-equivalent replacement components essential for the maintenance of scanning electron microscopes. It covers a broad range of parts including filaments, detectors, gaskets, vacuum pumps, control boards, and associated software licenses, ensuring uninterrupted operational capability of SEM equipment. The procurement is classified under NAICS code 423490 and is designated as a subcontract, indicating it supports a larger prime contract or program. Performance of the contract is required at a location in Coffeyville, Kansas, with a zip code of 73145, and the responsible agency is the Department of Defense under the FA8126 Afsc Pzimb office. Although specific details such as contract value, duration, or point of contact are not provided, the posting date of July 28, 2026, suggests this is a future solicitation with a focus on securing reliable, certified components from small business suppliers. The intent is to maintain the integrity and performance of critical defense-related SEM systems through genuine or equivalent replacement parts, ensuring compliance with technical and supply chain requirements.
Other Professional Equipment and Supplies Merchant Wholesalers

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 811212
Federal
Preventative Maintenance Services for Scanning Electron Microscope (SEM)The contract engages a qualified vendor to perform two annual preventative maintenance service calls on a JEOL JSM-IT300LV Scanning Electron Microscope, ensuring optimal performance and prolonged equipment lifespan. Each service visit includes a comprehensive inspection, precise calibration, thorough cleaning, component testing, replacement of any worn or degraded parts, and full operational verification to confirm the instrument meets all manufacturer specifications. These services are critical for maintaining the accuracy, resolution, and reliability of the SEM, which supports key scientific and technical operations. The contract is structured as a subcontract under a Total Small Business Set-Aside classification, reserved exclusively for small businesses as defined by the SBA, and falls under NAICS code 811212 for industrial and commercial machinery and equipment repair and maintenance. It is issued by the Department of Defense through the FA8126 Afsc Pzimb office, with performance required at the location in Coffeyville, Oklahoma, ZIP 73145. The solicitation was posted on July 28, 2026, and all work must be conducted in compliance with federal contracting standards, emphasizing quality, timeliness, and adherence to technical protocols outlined for the specific SEM model.
Computer and Office Machine Repair and Maintenance

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 518210
Federal
Data Integrity and Long-Term Storage SupportThe contract requires the implementation and validation of secure data management systems designed to preserve the integrity of FESEM data over a seven-year period, specifically to support legal and forensic applications in mishap investigations and failure analysis. The systems must ensure that all collected data remains unaltered, traceable, and accessible for official use, meeting rigorous standards for authenticity and reliability in high-stakes technical and judicial contexts. This involves deploying authenticated storage protocols, audit trails, and tamper-resistant mechanisms to safeguard against data corruption or unauthorized modification throughout the retention period. Performance is to be conducted at a location in Coffeyville, Oklahoma, under a subcontract classification administered by the Department of Defense through the FA8126 Afsc Pzimb office. The work falls under NAICS code 518210, indicating it pertains to data processing, hosting, and related services. Although the solicitation number and point of contact are not provided, the contractual obligation is clear: deliver a compliant, auditable infrastructure capable of supporting long-term data integrity for forensic and legal evidentiary purposes without deviation or compromise.
Computing Infrastructure Providers, Data Processing, Web Hosting, and Related Services

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 611430
Federal
Operator Training and Technical DocumentationThis contract requires the provision of comprehensive technical training for Air Force personnel focused on the operation of field emission scanning electron microscopes FESEM the use of Oxford analytics software correlative microscopy techniques and routine maintenance procedures. The training must be delivered in a structured and effective manner to ensure personnel achieve full operational proficiency and are capable of independently performing advanced analytical tasks. Alongside hands-on instruction the contractor is responsible for developing detailed standard operating procedures and technical manuals that serve as enduring reference materials to support consistent and safe usage of the equipment across multiple operational contexts. All training and documentation efforts must be conducted at the designated performance location in Coffeyville Oklahoma with the zip code 73145 and align with the North American Industry Classification System code 611430 which corresponds to other professional and technical training services. The contract is structured as a subcontract under the Department of Defense with oversight from FA8126 Afsc Pzimb and is posted on SAM gov with an original posting date of June 18 2026. The scope emphasizes not only immediate workforce readiness but also the long term sustainability of technical capabilities through clearly documented protocols and user centered guides.
Professional and Management Development Training

POSTED

4 months ago

DEADLINE

N/A
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 811310
Awarded
Federal
DRAFT: Underwater Egress Trainer (UET) Contract Logistic Support (CLS)
Solicitation # M6785423R8003
Commander

POSTED

almost 4 years ago

CLOSED

almost 4 years ago
View Details
NAICS: 811310
Awarded
Federal
Electro Optical Systems (EOS) 3D printers model numbers P 450 and M 290 Service
Solicitation # FA822723Q3D02
FA8227 Afsc Ol H Pzim

POSTED

about 4 years ago

CLOSED

almost 4 years ago
View Details
NAICS: 811310
Awarded
Federal
sPro 60 3D Printer Service
Solicitation # FA822723Q3D01
FA8227 Afsc Ol H Pzim

POSTED

about 4 years ago

CLOSED

almost 4 years ago
View Details
NAICS: 811310
Awarded
Federal
61--CONTROLLER,WINCH, IN REPAIR/MODIFICATION OF
Solicitation # N0038322QF076
Navsup Weapon Systems Support

POSTED

about 4 years ago

CLOSED

about 4 years ago
View Details
NAICS: 811310
Awarded
Federal
48--VALVE,FLOW CONTROL, IN REPAIR/MODIFICATION OF
Solicitation # N0010422QLE85
Navsup Weapon Systems Support Mech

POSTED

about 4 years ago

CLOSED

about 4 years ago
View Details
NAICS: 811310
Closed
Federal
Repair and Replace of Vertical Transportation Equipment (VTE) Systems at CFAS Japan.
Solicitation # N4008423R6500
Navfacsyscom Far East

POSTED

about 4 years ago

CLOSED

almost 4 years ago
View Details
NAICS: 811310
Awarded
Federal
Notice of Intent to Sole Source Repairs
Solicitation # W912NW23Q0009
W6QK Ccad Contr Office

POSTED

about 4 years ago

CLOSED

almost 4 years ago
View Details
NAICS: 811310
Closed
Federal
RRAD DSB Vehicles Technical Support and Supply Chain Management Services
Solicitation # PANDTA-22-P-0000-008910
W6QK Acc Rrad

POSTED

about 4 years ago

CLOSED

almost 4 years ago
View Details
NAICS: 811310
Closed
Federal
OPEN, INSPECT AND REPORT OF ARITHMETIC UNIT COMPUTER
Solicitation # 70Z08023QAG024
Sflc Procurement Branch 1(00080)

POSTED

about 4 years ago

CLOSED

almost 4 years ago
View Details
NAICS: 811310
Closed
Federal
Elastomer Press Preventative Maintenance
Solicitation # FA812523Q0011
FA8125 Afsc Pzima

POSTED

about 4 years ago

CLOSED

almost 4 years ago
View Details
NAICS: 811310
Closed
Federal
DLA Disposition Services Equipment Maintenance in Djibouti Africa
Solicitation # SP4510-23-R-1001
DLA Disposition Services - Ebs

POSTED

about 4 years ago

CLOSED

almost 4 years ago
View Details
NAICS: 811310
Awarded
Federal
OPEN, INSPECT AND REPORT DIESEL ENGINE
Solicitation # 70Z08023QAG031
Sflc Procurement Branch 1(00080)

POSTED

about 4 years ago

CLOSED

almost 4 years ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS