Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Hazardous Materials Handling & Safety Data Compliance

Active

Federal

Response Deadline08/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the identification, documentation, and precise labeling of all hazardous components within a maintenance kit in strict accordance with OSHA and Department of Defense regulations, ensuring full compliance with 29 CFR 1910.1200. This includes the comprehensive preparation and maintenance of Safety Data Sheets for each hazardous material, ensuring accurate chemical information, handling procedures, and emergency response protocols are available and up to date. All activities must align with federal safety standards to protect personnel and ensure regulatory adherence across the supply chain. Performance of this subcontract is designated for NEW CUMBERLAND, PA, with a deadline for response set for August 10, 2026, and the solicitation was posted on July 30, 2026. The contract falls under NAICS code 541620, which pertains to scientific and technical consulting services, indicating a focus on expert compliance and safety documentation rather than physical logistics or manufacturing. The contracting organization is the Department of Defense, operating through the CONSTRUCTION & EQUIPMENT T & IFO EQ office, and the solicitation is publicly accessible through the DIBBS platform.

General Info

Label hazardous components in maintenance kit per OSHA and DoD rules, provide updated Safety Data Sheets by August 10, 2026.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT T & IFO EQView Agency

NAICS

541620 - Environmental Consulting ServicesView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 30

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 05:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT T & IFO EQ

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT T & IFO EQ

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Identify, document, and label hazardous components within the maintenance kit per OSHA and DoD requirements, including preparation of Safety Data Sheets (SDS) and compliance with 29 CFR 1910.1200.

Similar Contracts

Same NAICS industry code

Environment and Protected Areas - Request for Proposal - Environmental Capacity Assessment of the Muskeg River Environment and Protected Areas (EPA)

Solicitation # AB-2026-05471

The project seeks to evaluate the environmental capacity of the Muskeg River watershed to accommodate releases of non-process affected water from oil sands mining and aggregate extraction activities. This includes surface runoff, muskeg and aggregate dewatering, aquifer depressurization, and other water sources unrelated to industrial bitumen extraction. The assessment will analyze historical and current hydrological conditions and water quality data for the Muskeg River and its tributaries, alongside known discharge rates and characteristics of existing industrial releases permitted under EPEA regulations. Ambient monitoring data and community-based observations will also be integrated to inform a robust understanding of cumulative impacts. The evaluation will focus on potential consequences to the river system’s hydrological integrity and water quality, ensuring a comprehensive view of environmental stressors. Findings will be communicated to Indigenous communities, industry stakeholders, and the public upon completion.

Environment and Protected Areas

POSTED

about 10 hours ago

DEADLINE

RFP 27-2032 Open Space and Recreation Plan Update

Solicitation # BD-27-1255-PL175-KR141-131915

Concord is seeking qualified consultants to update the 2015 Open Space and Recreation Plan in accordance with guidelines from the Massachusetts Executive Office of Energy and Environmental Affairs through the Division of Conservation Services. The scope of work requires comprehensive revisions to all sections of the plan, ensuring alignment with current state standards and community needs. Proposals must be submitted as sealed written responses by the deadline of August 26, 2026, and are solicited under RFP 27-2032 with solicitation number BD-27-1255-PL175-KR141-131915. The solicitation was posted on July 31, 2026, and is managed by the Planning Department of the Commonwealth of Massachusetts. All work is to be performed in Concord, with correspondence and submissions directed to the office located at Keyes Rd, Concord, MA 01742. Ryan Ferrara is the primary point of contact for inquiries regarding the proposal process.

PL175 - Planning Department

POSTED

about 20 hours ago

DEADLINE

Post-Construction National Pollutant Discharge Elimination System (NPDES) Construction General Permit (CGP) Compliance Services

Solicitation # 69056726Q000032

This contract is a combined synopsis and solicitation issued as a Request for Quotation (RFQ) under FAR 12.201-1 for Post-Construction National Pollutant Discharge Elimination System (NPDES) Construction General Permit (CGP) Compliance Services, exclusively set aside for small businesses. The solicitation number is 69056726Q000032, issued by the U.S. Department of Transportation’s Federal Highway Administration, Western Federal Lands Division based in Vancouver, WA, with performance expected across federal highway projects in the Western Federal Lands region. The period of performance runs from the date of award through September 30, 2027, and responses are due by August 6, 2026. Offerors must be certified small businesses in SAM.gov, with valid Unique Entity Identifiers and CAGE codes, and must comply with all applicable socioeconomic representations under FAR 52.219-1. The acquisition is evaluated under a Lowest Price Technically Acceptable (LPTA) methodology, where technical acceptability is determined first based on compliance with requirements, personnel qualifications, and past experience, and then the lowest-priced technically acceptable offer is selected without trade-offs. The scope of work requires comprehensive post-construction environmental compliance services under the NPDES CGP, including implementation and management of erosion and sediment control measures, stormwater pollution prevention, and all associated documentation such as an Erosion and Sediment Control Plan (126 pages), as-built reports, training records, and ICT deliverables meeting Section 508 accessibility standards. Required submissions include a Price Schedule, Past Experience Submission, Past Performance Questionnaire, and the Department of Labor’s Service Contract Act Wage Determination, all in specific file formats and within strict page and formatting limits. Non-compliant submissions may be rejected outright. All contracts will be governed by a robust set of FAR clauses including Service Contract Labor Standards, Equal Opportunity, Combating Trafficking in Persons with Alternate I, Privacy Training with Alternate I, Security Prohibitions and Requirements with Alternates, and Accelerated Payments to Small Business Subcontractors. Invoicing must be performed exclusively through the Delphi e-Invoicing system using login.gov credentials, with no acceptance of fax, email, or scanned invoices. The government conducts inspections at the project location based on ESCP compliance metrics like pH accuracy and turbidity levels. No contract value is specified in the solicitation as the pricing line item is

690567 Western Federal Lands Division

POSTED

about 22 hours ago

DEADLINE

NM MODEL FIELD VALIDATION

Solicitation # 140L1726Q0029

The Bureau of Land Management is soliciting bids under a total small business set aside for environmental consulting services to conduct botanical surveys in New Mexico as part of a field validation effort to refine habitat suitability models for decision making. This effort will be executed through a firm-fixed-price call against the USDA-USFS Land Management Integrated Services Blanket Purchase Agreement, with all associated terms and conditions applicable unless modified. The contract is governed by Part 12 procedures for commercial services, and service contract labor standards apply to work performed in Eddy and San Juan counties. Offerors must be actively registered on SAM.gov, and past performance will be evaluated through SAM.gov and CPARS.gov to determine responsibility. The NAICS code is 541620 with a maximum total value of $19 million, reserved exclusively for small businesses. Proposals must be submitted in two parts: Non-price factors and a pricing proposal, sent to scott_voigt@ios.doi.gov no later than August 17, 2026. Questions must be directed to the same email by August 26, 2026, and responses will be issued via RFQ amendments to all vendors. All quotations must remain valid for at least 120 days. Payment terms adhere to the 14-day prompt pay standard via IPP.gov, and progress payments are permitted. The work is to be performed in New Mexico, with the contracting office located in Lakewood, Colorado. Late submissions will not be accepted, and no fees should be paid for SAM.gov registration assistance—free support is available through local APEX Accelerators.

Colorado State Office

POSTED

about 22 hours ago

DEADLINE

Amargosa Road and Palmetto Way Industrial Warehouse Building

Solicitation # forecast_f1b35373-7709-4009-ac69-f2e07323ec3f

City of Hesperia

POSTED

DEADLINE

General Plan Update, Zoning Code and Map Amendment, and Climate Action and Adaptation Plan (CAAP)The City of Lake Elsinore is advancing a comprehensive update to its land use and environmental planning framework through the General Plan Update, Zoning Code and Map Amendment, and Climate Action and Adaptation Plan. The General Plan Update builds upon the 2011 comprehensive plan and the 2022 Housing Element, aligning with state statutory mandates and the 2023 General Plan Guidelines to guide future development, coordinate with regional planning initiatives, and establish strategies for reducing greenhouse gas emissions and addressing climate change impacts. The associated Environmental Impact Report evaluates each of the seven elements of the updated plan to ensure compliance and coherence. Simultaneously, the Zoning Code and Map Amendment will revise the city’s zoning regulations and map to fully implement the policies and land use designations outlined in the General Plan, ensuring regulatory alignment with the city’s long-term vision. The Climate Action and Adaptation Plan serves as the strategic backbone for climate resilience, providing a baseline assessment of current greenhouse gas emissions, forecasting future emissions based on projected growth, setting measurable reduction targets, and outlining specific adaptation measures to mitigate identified climate hazards. Together, these components form an integrated approach to sustainable development, environmental protection, and community preparedness in the face of a changing climate.

City of Lake Elsinore

POSTED

DEADLINE

Entrada South and Valencia Commerce Center (VCC) Project

Solicitation # 2000011025

Los Angeles County Regional Planning

POSTED

DEADLINE

Environmental Determination (ED23-180) Minor Use Permit / Coastal Development Permit (C-DRC2023-00041)The project, located at 750 Hearst Castle Road approximately five miles north of San Simeon in the Coastal Zone and North Coast Planning Area, seeks approval for a phased development under a Minor Use Permit and Coastal Development Permit to install modular office structures and associated infrastructure on a 132-acre parcel designated for Recreation use. Phase One includes the construction of two new modular offices totaling approximately 5,760 square feet, a 1,300-square-foot concrete and gravel pad预留 for a future third modular unit, two ADA-compliant parking spaces with walkways, two 10,000-gallon septic holding tanks, trenching for 1,500 feet of electrical conduit and related equipment, and 420 feet of wastewater drain pipe with water supply connections. General site improvements will support these additions, and the work will result in approximately 7,500 square feet of total ground disturbance. Phase Two will involve installing a third modular office of about 1,152 square feet with minor associated improvements. The project requires the removal of six Coast Live Oak trees and includes utility stub-outs and appurtenances to support current and future development. The project has undergone environmental review under Environmental Determination ED23-180 and is part of a larger regulatory framework managed by San Luis Obispo County. The planning and permitting authority rests with the county’s land use department, with Dane Mueller serving as the primary point of contact and Doug Barker acting as an agent representing the California Department of Parks and Recreation. The notice was posted on July 31, 2026, and the project falls within the coastal jurisdiction where development is subject to stringent environmental and land use controls. All work is constrained to the specific parcel at 93452, and no additional site expansions or structural additions beyond the described phases are contemplated under this permit application. The development reflects a modest expansion intended to support operational needs within an ecologically sensitive coastal environment.

San Luis Obispo County

POSTED

DEADLINE

Iron Lofts Mixed-Use Residential DevelopmentThe Iron Lofts Mixed-Use Residential Development project, located at 3596 Commerce Street in Riverside, California, is a land use entitlement process led by Darrin Olson of Iron Lofts, LLC, to enable the construction of a development containing 291 residential units and nine live/work units on a 7.03-acre site. The project requires six distinct approvals from the City of Riverside: a General Plan Amendment to change the land use designation from Business/Office Park to Mixed Use – Urban; a Zoning Code Amendment to rezone the property from Business and Manufacturing Park with Specific Plan and Cultural Resources overlays to Mixed Use – Urban with the same overlays; a Specific Plan Amendment to expand the Mixed Use Marketplace Sub Area to include the subject property; a Tentative Tract Map to consolidate twelve parcels into one, dedicate new right-of-way, and vacate portions of an alley and Sixth Street; a Site Plan Review for the proposed development layout; and a Certificate of Appropriateness to ensure infill construction complies with historic district standards, particularly regarding integration of a Structure of Merit within the Seventh Street East Historic District. The process is governed by California Environmental Quality Act (CEQA) regulations, with a Negative Declaration issued confirming no significant environmental impact, eliminating the need for an Environmental Impact Report. The only documented financial obligation is a $3,093.75 environmental filing fee paid to the Assessor-County Clerk-Recorder, with no further pricing, contract line items, or procurement costs identified, indicating the process is administrative rather than a competitive federal procurement. All approvals are handled by the City of Riverside’s Community Development Department, with Senior Planner Judy Eguez serving as the primary point of contact for planning matters and environmental documentation. The proposal was posted as a forecast on July 15, 2026, following City Council approval on July 14, 2026, and no formal contract clauses, federal acquisition regulations, payment terms, delivery schedules, or contractor representations are applicable, as the endeavor is municipal land use entitlement, not a federal supply or service contract.

City of Riverside

POSTED

DEADLINE

Place and Purpose of Use, Extension of Time, and Instream Dedication Project

Redway Community Service District

POSTED

DEADLINE

Labbe Meadow Restoration Project (Project)The Labbe Meadow Restoration Project aims to restore degraded hydrologic functions of a meadow on the Labbe Ranch by transforming a historic ditch into a series of open water ponds through the installation of earthen plugs. These structures will elevate the base level of the ditch channel, disrupt linear water conveyance, and enhance surface and subsurface water connectivity with the surrounding meadow to the northeast. The primary goals are to increase habitat complexity by creating new open water features and to promote groundwater recharge, thereby supporting broader ecological resilience. The project focuses on ecological restoration rather than flood control or drainage, emphasizing natural hydrologic processes over engineered solutions. The project is being coordinated by the Regional Water Quality Control Board, Region 5 – Redding, with oversight and implementation support from key personnel including Senior Environmental Scientist Lynn Coster and Project Manager Christy Morgan. Noah Abramson, as the property owner, is also instrumental in the project's execution. All work will take place in Quincy, California, and the project is listed as a forecast with a posted date of July 31, 2026, indicating that formal solicitation and contracting processes are anticipated to begin around that time. There is no set-aside designation or NAICS code specified at this stage, and details regarding funding or contractor eligibility have not yet been published.

Regional Water Quality Control Board, Region 5 - Redding

POSTED

DEADLINE

Town of Kentville: Urban Forest Management Plan

Solicitation # TOK202618

The Town of Kentville is addressing critical vulnerabilities in its urban forest ecosystem caused by climate-related stressors including extreme heat, drought, and the spread of Hemlock Woolly Adelgid, a destructive invasive pest threatening native hemlock stands. With two major urban forest areas—the Gorge and the Ravine—alongside street trees and park canopies in the downtown core, the town faces an aging and unevenly distributed canopy that lacks adequate data for effective management. Immediate priorities focus on closing foundational data gaps to inform strategic planting, conservation efforts, and targeted interventions, including the use of chemical treatments to protect hemlock trees until long-term biological controls, such as predatory insects, can be reliably implemented. The overarching goal is a sustainable, science-based urban forest management system over a 10-to-50-year horizon that ensures resilience, biodiversity, and public benefit. The procurement initiative, solicitation number TOK202618, seeks expert support to develop a comprehensive Urban Forest Management Plan that aligns with these ecological and operational needs. The tender was posted on July 31, 2026, with responses due by August 27, 2026, and is managed by the Town of Kentville through its Contracting Authority, Darren Shupe. While the tender is listed on CanadaBuys, potential bidders are directed to the Nova Scotia Procurement Portal for the most current and accurate tender documents, including any amendments or addenda. Third-party platform registration may be required to access or submit materials. No costs are associated with acquiring documents, and the contract’s full duration and scope details are outlined in the official tender documentation.

Town of Kentville

POSTED

DEADLINE

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT T & IFO EQ

Same awarding agency

DISK DRIVE UNIT

Solicitation # SPE8EN-26-Q-0063

The contract pertains to the procurement of 153 Disk Drive Units identified by NSN 7025-01-642-2507 under solicitation SPE8EN-26-Q-0063, with a required delivery within 30 days of award. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless a later amendment supersedes it. Packaging must comply with DLA packaging standards, and any non-accepted supplies must have government identification removed prior to return. The item includes technical data subject to export control under ITAR or EAR, restricting disclosure to foreign persons anywhere in the world, including foreign nationals employed by U.S. companies or their subsidiaries. Access to this controlled data is limited to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DOL training and the export-controlled data questionnaire, and have received formal approval from DLA. The Defense Federal Acquisition Regulation Supplement 252.225-7048 governs the handling of covered defense information, and the contract is subject to DFARS provisions regarding controlled technical data. The solicitation was posted on July 31, 2026, with responses due by August 7, 2026, and performance is to be delivered to New Cumberland, Pennsylvania, 17070-5002, with Jennifer Esworthy listed as the primary point of contact.

Computer Storage Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

Solicitation # SPE8EN-26-Q-0061

The contract pertains to the procurement of modeling clay under NSN 7510-01-654-4174, with a total quantity of 735 units—10 units for one delivery and 725 units for another—both subject to a firm fixed price and zero variance in quantity. Delivery must occur within 30 days after award, with FOB origin terms and inspection and acceptance occurring at the destination. Packaging and marking must strictly comply with MIL-STD-2073-1E and MIL-STD-129, with no special markings required, and palletization must adhere to DLA packaging standards. The item is designated as a critical application item requiring FAA airworthiness approval, and the supplier must maintain supply chain traceability documentation in accordance with DLA Directive Procurement Note C03. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical attributes are verified at the highest level of scrutiny. The product is to be shipped via traceable means only, excluding parcel post, with separate shipping destinations listed for each quantity—Fort Belvoir and Fort A P Hill—with additional transportation guidance referenced in DLA procedural notes. The contract incorporates all relevant technical and quality requirements from the DLA Master List, and the supplier must comply with configuration change management and removal of government identification from non-accepted supplies. The solicitation number is SPE8EN-26-Q-0061, with response due by August 7, 2026, under the Department of Defense, for use by federal agencies.

Clay Building Material and Refractories Manufacturing

POSTED

about 17 hours ago

DEADLINE

KEYBOARD SUPPORT

Solicitation # SPE8EN-26-Q-0064

This contract specifies the procurement of a Keyboard Support item under NSN 7040-01-462-8859, with a quantity of 14 units, requiring delivery within 30 days after order. The solicitation, issued under SPE8EN-26-Q-0064, mandates compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 for the Third-Party Assessment Organization, indicating that cybersecurity protocols and controls are critical to contract performance. The item is subject to Covered Defense Information requirements, and all technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. The supplier must adhere to strict manufacturing and marking standards, including application of the manufacturer’s symbol directly on the item's surface per MIL-HDBK-57, while prohibiting markings on bearing surfaces and waiving the symbol requirement for small fasteners. Mercury and mercury-containing compounds are strictly prohibited unless exception applies to functional components like batteries, fluorescent lamps, and specified sensors, with portable devices requiring shock-proof design and secondary containment. Technical data associated with this contract is subject to ITAR or EAR export controls, requiring prior government authorization for any disclosure to foreign persons, even within the U.S., and access is limited to DLA contractors with JCP certification, completed training, and formal approval. All documentation and drawings are accessible through DIBBS during the solicitation window, with sole point of contact being Jennifer Esworthy of the Department of Defense’s Construction & Equipment T & IFO EQ office.

Computer Terminal and Other Computer Peripheral Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

SOLID STATE DRIVE

Solicitation # SPE8EN-26-Q-0062

This contract specifies the procurement of a single solid-state drive with NSN 7025-01-718-9534 and part number RRT-18S-SSD-MLC-512GB-6 from Red Rock Technologies Inc under solicitation SPE8EN-26-Q-0062, issued by the Defense Logistics Agency. The item is being purchased at a firm fixed price with zero variance allowed in quantity, and delivery is required within 30 days after award. Inspection and acceptance occur at the destination, with packaging strictly governed by MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 and palletization per RP001. The drive must comply with all technical and quality specifications referenced from the DLA Master List of Technical and Quality Requirements. Mercury and mercury-containing compounds are prohibited unless explicitly exempted for functional uses such as batteries, fluorescent lights, sensors, or weapon systems, with additional containment requirements for portable devices as per NAVSEA 5100-003D. The delivered item must be shipped via the fastest traceable means, explicitly excluding parcel post, to the freight shipping address at NSWC Crane in Crane, Indiana. Special handling instructions include a RDD 999 designation and a designated point of contact for government use. The contract references DLA’s unit of issue standards and requires compliance with all applicable defense acquisition policies, including the removal of government identification from non-accepted items. The purchase is linked to a specific project code and purchase request, with an identified material need date of June 11, 2026, and the contract is subject to the technical and quality revisions in effect on the solicitation issue date. All supplier documentation, including source approval requests, must meet DLA standards, and any covered defense information related to this procurement is subject to applicable security protocols.

Computer Storage Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

DISK DRIVE UNIT

Solicitation # SPE8EN-26-T-2630

The contract is for the procurement of eight disk drive units identified by NSN 7025-01-685-2019 under solicitation SPE8EN-26-T-2630, issued by the Defense Logistics Agency under the Department of Defense. Delivery is required 65 days after order placement, with a need ship date of April 14, 2026, and an original delivery target of November 2, 2026. Items must be delivered FOB origin to the receiving warehouse in Tracy, California, with no variance allowed in quantity. Packaging must strictly comply with MIL-STD-2073-1E, including specific preservation methods, materials, and packaging codes, while marking and labeling must adhere to MIL-STD-129 with no special marking required. The contract prohibits the intentional addition of mercury or mercury-containing compounds to the supplied hardware, with exceptions limited to functional uses in batteries, fluorescent lights, sensors, controls, weapon systems, and Navsea-specified reagents; portable devices containing mercury must include shockproof construction and a secondary containment boundary per NAVSEA 5100-003D. The contract incorporates numerous FAR and DFARS clauses governing safeguarding of covered defense information, cybersecurity incident reporting, trafficking in persons, employment eligibility verification, hazardous materials handling, export controls, and prohibitions on acquiring equipment from Communist Chinese military companies. Contractors must comply with the Hazard Communication Standard, submit Safety Data Sheets prior to award, and ensure all hazardous materials are properly labeled. Electronic submission via DIBBS is mandatory, with all offers due by July 31, 2026. Offerors must maintain current representations in SAM.gov, including unique entity identifiers and CAGE codes, and disclose any use of covered telecommunications equipment or services. Payment processing will occur through WAWF, and all deliveries are subject to destination inspection and acceptance by the government. Technical data packages are not available from DLA Troop Support, and suppliers are instructed not to submit requests to them. The contract reflects simplified acquisition procedures and includes provisions for accelerated payments to small business subcontractors and small business program representations.

Computer Storage Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

KEYBOARD, DATA ENTRY

Solicitation # SPE8EN-26-Q-0065

The contract is for one unit of a data entry keyboard with NSN/Part Number 7025-01-609-7428, issued under solicitation SPE8EN-26-Q-0065 with a deadline for response on August 7, 2026, and a delivery requirement of 30 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Cybersecurity compliance requires CMMC Level 2 certification through a certified third-party assessment organization, and the item is subject to export control under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location. Access to associated technical data is restricted to contractors with approved US/Canada Joint Certification Program status, completion of mandatory DOD export control training, and DLA authorization. Government identification must be removed from non-accepted supplies, and packaging must conform to DLA specifications. The point of contact is Jennifer Esworthy, and performance is to be delivered to FPO, zip 09566.

Computer and Computer Peripheral Equipment and Software Merchant Wholesalers

POSTED

about 17 hours ago

DEADLINE

Commercial Packaging & Marking ServicesThe contract requires comprehensive commercial packaging and marking services for disk drive units, ensuring full adherence to DLA, ASTM D3951, and MIL-STD-129 specifications. This includes the proper preservation of sensitive electronic components and precise labeling of containers to meet federal military standards for identity, handling, and shipment. The work must be performed in compliance with established protocols to safeguard functionality and traceability throughout the logistics chain, with special attention to environmental protection and clear, standardized markings. This subcontract is a Total Small Business Set-Aside under the SBA program, designated under NAICS code 561910 for other support activities for transportation. The opportunity was posted on July 30, 2026, with a response deadline of August 10, 2026, and the place of performance is specified as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The contracting activity falls under the Department of Defense, specifically the Construction & Equipment T & IFO EQ office, and all submissions must be directed through the official DIBBS portal using the provided solicitation link.

Packaging and Labeling Services

POSTED

DEADLINE

Sustainable Products Certification & ReportingThe contract requires vendors to certify and report on the sustainable attributes of disk drive units to ensure compliance with federal green procurement policies, specifically FAR 23.206 and Executive Order 14057, which emphasize environmentally preferable products and federal sustainability goals. All submitted disk drives must be documented with verifiable evidence of their environmental impact reduction, energy efficiency, and adherence to established green standards. This subcontract is a total small business set-aside under SBA guidelines, reserved exclusively for small businesses as defined by FAR 19.5, and falls under the NAICS code 541690 for other scientific and technical consulting services. The solicitation was posted on July 30, 2026, with a response deadline of August 10, 2026, and the performance location is designated as New Cumberland, Pennsylvania, 17070-5002. The contracting entity is the Department of Defense under the Construction & Equipment T & IFO EQ office, and the opportunity is accessible via the DIBBS platform.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract requires the provision of hazard warning labels, safety data sheets, and full regulatory compliance documentation for disk drive units that contain hazardous substances, ensuring adherence to OSHA, DFARS, and MIL-STD-129 standards. All deliverables must align with federal safety and labeling mandates, including accurate chemical identification, risk communication, and physical marking of containers and units as prescribed by military and industrial regulations. The work is to be performed at New Cumberland, Pennsylvania, with a strict submission deadline of August 10, 2026, and is set aside exclusively for small businesses under the SBA’s Total Small Business Set-Aside program. This solicitation, classified under NAICS code 541620 for other scientific and technical consulting services, is issued by the Department of Defense through its Construction & Equipment T & IFO EQ office. The successful provider must demonstrate proven expertise in hazardous materials compliance, the ability to generate and maintain up-to-date safety documentation, and experience applying MIL-STD-129 labeling requirements for DoD supply chains. Compliance must extend to all phases of delivery, from initial labeling on production units to documentation packages accompanying shipments, ensuring seamless integration into defense logistics systems. While no point of contact is listed, all inquiries and submissions must follow the DIBBS platform link provided, and the awardee is expected to maintain continuous alignment with evolving federal safety and procurement regulations throughout the contract period.

Environmental Consulting Services

POSTED

DEADLINE

Supply of Disk Drive Units (Commercial IT Hardware)The contract calls for the procurement and delivery of five commercial off-the-shelf disk drive units designated for use by the Department of Defense under the Construction & Equipment T & IFO EQ office. All units must fully comply with hazardous materials labeling requirements and federal packaging standards to ensure safe handling and transportation. The solicitation is a small business set-aside under the SBA Total Small Business Set-Aside program, restricting eligibility to small businesses as defined by FAR 19.5, with the NAICS code 334613 indicating the industry classification for computer and peripheral equipment manufacturing. The response deadline is August 10, 2026, and the equipment must be delivered to the specified place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The contract was posted on July 30, 2026, and bidders must follow the process outlined through the DIBBS portal using the reference number SPE8EN26T2751.

Blank Magnetic and Optical Recording Media Manufacturing

POSTED

DEADLINE

Commercial-Off-The-Shelf (COTS) Component SourcingThe contract entails sourcing and supplying commercial-off-the-shelf electrical components for a maintenance kit, with strict requirements for traceability and adherence to DLA quality standards. All components must be procured as COTS items and verified to meet the Department of Defense's rigorous compliance criteria, ensuring reliability and interoperability in critical applications. The performance location is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the NAICS code 423690 indicates the procurement falls under wholesale trade of electronic parts and equipment. The solicitation is structured as a subcontract, open to qualified suppliers who can demonstrate capacity to deliver certified COTS components on timeline, with responses due by August 10, 2026, and the opportunity posted on July 30, 2026, through the DIBBS platform.

Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

DEADLINE

Packaging, Marking & Military Shipment ComplianceThe contract requires the provision of packaging, preservation, marking, and bar-coding services for 31 electrical maintenance kits, all in strict compliance with Department of Defense and Defense Logistics Agency standards. Central to the requirements is adherence to MIL-STD-129 labeling specifications, ensuring proper identification and traceability of each kit, along with rigorous verification of the unit-of-issue to guarantee accuracy in inventory and deployment. All work must meet the detailed technical and procedural benchmarks established for military logistics and shipment compliance. The work is to be performed at a designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 30, 2026, and responses are due by August 10, 2026. This is a subcontract opportunity under the NAICS code 561910, which classifies it within the support activities for military operations. The contracting entity is the Department of Defense through the Construction & Equipment T & IFO EQ office, and all activities must be executed in alignment with federal military logistics protocols to ensure seamless integration into the broader defense supply chain.

Packaging and Labeling Services

POSTED

DEADLINE