Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Hazardous Materials Labeling and Compliance

Active

Federal

Response Deadline07/30/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the application of hazard warning labels in strict compliance with OSHA HAZCOM standards and MIL-STD-129 for the shipping and storage of hazardous materials. All labeling must meet federal regulatory requirements to ensure safety, proper identification, and regulatory adherence during transportation and warehousing operations. The work is tied to the performance location at Ellsworth Air Force Base with the ZIP code 57706-4835 and falls under NAICS code 561920, indicating it is within the waste management and remediation services category. This is a subcontract opportunity issued by the Department of Defense through the Maritime Supply Chain ESOC Buys office, with a response deadline of July 30, 2026, and the solicitation was posted on July 19, 2026. Contractors must be prepared to demonstrate expertise in labeling hazardous materials according to both civilian and military standards, with no set-aside type specified, meaning the opportunity is open to all eligible subcontractors.

General Info

Apply hazard labels per OSHA and MIL-STD-129 at Ellsworth AFB by July 30, 2026.

Agency

Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYSView Agency

NAICS

561920 - Convention and Trade Show OrganizersView NAICS

Place of Performance

ELLSWORTH AFB, SD, 57706-4835, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 19

subcontract

Response DeadlineJul 30

Submission deadline

Response Deadline

07/30/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Application of hazard warning labels in compliance with OSHA HAZCOM and MIL-STD-129 for shipping and storage, if hazardous materials are present.

Similar Contracts

Same NAICS industry code

2026 C5ISR Industry ExpoThe U.S. Army Combat Capabilities Development Command’s C5ISR Center is hosting the 2026 Industry Expo on August 25–26 at Aberdeen Proving Ground, Maryland, in person only, with no virtual or hybrid options available. The event is designed to foster direct, two-way collaboration between the Army and industry partners, focusing on current and future science and technology priorities across C5ISR domains. Attendance is limited to five representatives per business entity registered under a unique CAGE Code, with no on-site registration allowed and no substitutions permitted after August 17, 2026. The event format includes formal presentations on the first day covering key technology thrust areas and a symposium-style exhibition on the second day featuring C5ISR Center booths for technical dialogue—industry participants will not have booth space for their own demonstrations or displays. All attendees must be U.S. citizens and meet strict security requirements: those attending classified sessions must have a completed Tier 3 Personnel Security Investigation and submit a Visit Authorization Request through DISS by August 17, 2026; all others must provide verified proof of U.S. citizenship via official documentation by the same deadline. Access to controlled technical attachments detailing projected technology areas requires prior Joint Certification Program certification, which must be initiated through DD Form 2345 and processed via the DLA JCP portal. Photo identification is mandatory for entry both days, and failure to complete registration or verify identity will result in denial of entry. The event is not a solicitation, request for proposal, or binding commitment by the government to procure products or services, and feedback will be collected via a post-event survey distributed to registered attendees.

POSTED

about 10 hours ago

DEADLINE

In-Person Industry Day for Loan Servicing and Real Estate Owned (REO) for the Department of Veterans Affairs (VA) Loan Guaranty Service (LGY)The Department of Veterans Affairs is hosting an in-person Industry Day on August 12, 2026, in Frederick, Maryland, to share information about its Loan Servicing and Real Estate Owned (REO) programs, with sessions scheduled from 9:00 a.m. to 11:30 a.m. for Loan Servicing and 1:30 p.m. to 4:00 p.m. for REO. The following day, August 13, 2026, features a Reverse Industry Day at a different location in Frederick, offering vendors the opportunity to request a 10-minute briefing slot on a first-come, first-served basis. Registration is mandatory for attendance and must be completed by August 7, 2026, at 12:00 p.m. EST, or when the 90-attendee cap is reached, whichever occurs first. Each registered firm may send up to two representatives, and participation requires prior registration via email to specified VA contacts using the provided form; attending this event does not guarantee a contract opportunity or obligate the government to issue a solicitation. The event is open to all SAM.gov-registered entities, and while non-mandatory, it is intended to enhance communication and transparency between the VA and industry partners. The notice explicitly states that this is purely informational and not a request for proposals, and participation is not a prerequisite for future contract submissions.

Sac Frederick (36C10X)

POSTED

DEADLINE

Generative Optogenetics (GO) workshopThe Generative Optogenetics (GO) workshop, organized by the Defense Advanced Research Projects Agency, is a pivotal gathering aimed at advancing the frontier of synthetic biotechnology through light-driven nucleic acid synthesis. This event brings together leading scientists, performers, and innovators working on optogenetics, protein engineering, computational biology, and biosecurity to share breakthroughs and foster collaboration on a revolutionary platform that enables template-free, light-programmed DNA and RNA synthesis inside living cells. The workshop features technical sessions led by GO program teams, lightning talks, and poster presentations covering key areas such as engineered allostery, novel molecular motions, nucleic acid processivity, error correction, subcellular engineering, and AI-driven polymerase modeling. It also includes a dedicated Biosecurity Forum and Commercialization & Policy Panel to address dual-use risks, safety protocols, ethical considerations, regulatory pathways, and pathways to transition technologies for defense and commercial applications. Participants are encouraged to submit research synopses for the chance to present their work, with a deadline set for August 14, 2026, and registration closing on September 23, 2026. The workshop itself will be held on October 22–23, 2026, offering structured time for networking, collaborative idea exchange, and the potential for joint experimental design. This event is open not only to GO program performers and collaborators but also to external researchers and experts in synthetic biology, molecular engineering, and related policy domains who are interested in contributing to the next generation of biological information systems. With a focus on bridging computational design with biological execution, the workshop serves as a catalyst for transforming how genetic instructions are delivered, with profound implications for biomanufacturing, therapeutics, and national defense.

Defense Advanced Research Projects Agency

POSTED

DEADLINE

Event Logistics & On-Site CoordinationThe contract titled Event Logistics & On-Site Coordination requires comprehensive management of on-site logistics for public seminars held within a state park in Richmond, Kentucky. Responsibilities include coordinating with vendors, managing schedules and timing, overseeing event setup and breakdown, and ensuring strict adherence to all applicable state regulations governing public gatherings in state park environments. The subcontractor will serve as the primary point of operational control on the ground, ensuring seamless execution from initial arrival through conclusion of each event while maintaining compliance with safety, environmental, and permitting requirements. This opportunity, posted by the Kentucky Department of Criminal Justice under NAICS code 561920 for other support services for events, is open for bids with a response deadline of July 24, 2026. The solicitation is structured as a subcontract, with no set-aside classification specified, and the place of performance is limited to the designated state park location in Richmond. All activities must align with the agency’s objectives for public seminars, and the contractor must demonstrate proven experience in event coordination within regulated public spaces. The official solicitation details are available through the Kentucky state procurement portal.

Department of Criminal Justice

POSTED

DEADLINE

Event Audio Visual ServicesThe University of Houston is soliciting proposals from qualified firms to deliver comprehensive Event Audio Visual Services in support of the Office of Protocol and Special Events. These services are required for a range of university functions including the Centennial Celebrations and other special events, and may be conducted on campus, at Wortham House, or at various off-campus venues across Texas. Vendors must be prepared to provide full audiovisual support encompassing equipment setup, operation, and technical coordination to ensure seamless execution of events. The solicitation, identified as RFP-730-UofH-3136, was posted on July 16, 2026, with proposals due no later than August 6, 2026, at 11:00 PM Central Time. This opportunity is open to all eligible firms without specific set-aside restrictions and falls under the state and local government sector classification. Eric Cabiran serves as the primary point of contact for inquiries and can be reached via email at ecabiran@Central.UH.EDU or by phone at 713-743-8568. All submissions and communications must adhere to the guidelines outlined in the solicitation and be directed through the official Texas SmartBuy portal.

University of Houston

POSTED

DEADLINE

Proposers Day: RAAPTRDARPA will host an in-person Proposers Day for the RF Architectures Applying Photonic Timing and Routing program on June 16, 2026, at the DARPA Conference Center in Arlington, Virginia, from 9 a.m. to 5 p.m. Eastern Time. This event is designed to provide potential proposers with detailed insights into the upcoming program solicitation, which is expected to be released after the event. Interested participants must register by 11:59 p.m. ET on June 8, 2026, to secure attendance. The official solicitation, once published, will be accessible via SAM.gov, and the event details are available on DARPA’s official website. The activity falls under NAICS code 561920, indicating administrative and support services related to research and development, and is part of the Department of Defense’s broader efforts in advanced RF and photonic technologies.

Defense Advanced Research Projects Agency

POSTED

DEADLINE

Hazard Warning Labeling Compliance ServicesThis contract requires the application of hazard warning labels in strict compliance with Federal Acquisition Regulation FAR 252.223-7001, ensuring that all hazardous materials are properly identified using the Globally Harmonized System of Classification and Labeling of Chemicals and OSHA’s Hazard Communication Standard. The work involves accurate labeling that includes required pictograms, signal words, hazard statements, and precautionary statements, with labels correctly placed on containers, packaging, and equipment to ensure visibility and accessibility for personnel handling or working near hazardous substances. The services are performed under a subcontract awarded by the Defense Logistics Agency within the Department of Defense, and the NAICS code 561920 indicates the work falls under other support services for waste management. The requirement emphasizes consistent adherence to federal safety standards to maintain compliance and ensure workplace safety across the supply chain.

Defense Logistics Agency

POSTED

DEADLINE

Intent to Sole Source - Ancillary Services (Carpet, Padding, and Material Handling) at the 2026 Boston Fan ExpoThe United States Army Recruiting Command is seeking to sole source ancillary services including carpet, padding, and material handling for the 2026 Boston Fan Expo at the Massachusetts Convention Center in Boston, Massachusetts. These services are critical to enabling USAREC’s engagement with industry and enhancing its presence at the event. The procurement is classified under NAICS code 561920 with a size standard of $20,000,000 and is assigned PCS code S216. The solicitation number is PANMCC26P0000049689, and the intent to sole source was posted on July 16, 2026, with responses due by July 26, 2026. The contract is being managed by the Office of W6QM Micc-Ft Knox within the Department of Defense, with primary point of contact Ashley Brus and secondary contact Meagan S. Clavel available for further inquiries.

W6QM Micc-Ft Knox

POSTED

DEADLINE

Event Planning and Management OversightThe contract requires the provision of experienced personnel to manage all aspects of event planning and execution for a conference lifecycle, ensuring seamless coordination from initial design through final delivery. Responsibilities include overseeing quality control, compliance with Texas Veterans Commission television and communication standards, and adherence to all procedural and operational requirements specified by the agency. The contractor must demonstrate expertise in end-to-end event management with a strong focus on regulatory alignment and consistent performance monitoring across all phases of the event. This is a subcontract under NAICS code 561920, posted on July 15, 2026, with a response deadline of August 26, 2026. The Texas Veterans Commission is the contracting entity, though specific details regarding the place of performance, office address, or point of contact are not provided. All work must be performed in alignment with TVC’s standards, and interested parties must submit proposals through the designated portal before the deadline. The nature of the engagement implies a need for proven experience in large-scale event logistics, compliance management, and public sector coordination, particularly within state veteran service contexts.

Texas Veterans Commission

POSTED

DEADLINE

in about 1 month

Intent to Sole Source -AUSA 2026 Electrical ServicesThe U.S. Army Recruiting Command Mission Support Battalion, acting through MICC-Fort Knox, intends to award a sole source firm-fixed price contract to ACTE for electrical services and all required materials to support exhibit and office spaces at the Association of the United States Army Annual Convention in Washington, DC, scheduled for October 12–14, 2026. This action is authorized under 41 U.S.C. 1901 and implemented through FAR 12.102(a) as modified by DFARS CD 2026-O0028, based on the determination that only one source is reasonably available to fulfill the requirement. The contract will cover all necessary electrical setups, including installation, maintenance, and materials, for Army displays and operational spaces at the Walter E. Washington Convention Center. This notice serves purely as an informational announcement and is not a solicitation for proposals, quotes, or capability statements, adhering to FAR 5.101 for dissemination. No competitive bidding will be conducted, and the solicitation number is PANMCC26P0000050406, with the NAICS code 561920 indicating specialized support services for events. Primary point of contact is Kelly Tipple, with secondary contact Adrian Atkinson, both reachable through their official Army email addresses.

W6QM Micc-Ft Knox

POSTED

DEADLINE

Technical Collaboriation Initiative (TCI)The Technical Collaboration Initiative (TCI) is a sources-sought opportunity issued by the NSWC Indian Head Division to secure a comprehensive suite of collaborative workspace and expert support services in close proximity to its main gate. The contract seeks facilities located within ten miles of Indian Head, Maryland, that are accredited for Secret-level classification and include classrooms, laboratories, office space, and conference rooms designed to enable secure collaboration, training, planning, testing, and operational support. These facilities must accommodate mission-critical activities related to energetics, ordnance systems, research and development, test and evaluation, engineering, explosive ordnance disposal, and counter-improvised explosive device operations. On-demand access to qualified Subject Matter Experts across these technical disciplines is a core requirement to ensure continuous support for the division’s full-spectrum energetics mission. The solicitation, identified as N00174-26-RFPREQ-10-0081, was posted on July 15, 2026, with a deadline for responses set for July 30, 2026. This effort falls under NAICS code 561920 and is managed by the Department of Defense through the NSWC Indian Head Division office located in Indian Head, Maryland. Melinda Blaine serves as the point of contact for inquiries and submissions. Proposals must demonstrate the ability to meet stringent security protocols, provide physically secure and classified environments, and ensure seamless integration with the division’s existing operations. The goal is to establish a responsive, secure, and technically robust collaboration platform to enhance the effectiveness and efficiency of NSWC IHD’s technical missions.

Nswc Indian Head Division

POSTED

DEADLINE

AMC 2026 Summer Industry PreviewAir Mobility Command is hosting the 2026 Summer Industry Preview on August 18-19 at McConnell Air Force Base in Wichita, Kansas, organized by the 22nd Air Refueling Wing under solicitation number AMC-2026-SIP. The event is designed to connect industry partners with real-world operational challenges faced by Mission Support Teams, which are critical to enabling AMC’s global mobility and deterrence missions across complex, degraded, and contested environments, including potential chemical, biological, radiological, or nuclear threats. The preview focuses on identifying innovative, practical, and rapidly deployable solutions to enhance capabilities in mission planning, aircraft maintenance, rapid modifications, and support operations under adverse conditions. Industry participants are invited to engage directly with AMC units to co-develop technologies and processes that can be acquired at the unit, wing, or headquarters level. Registration is开放 through a designated government form, with a deadline of August 2, 2026, and detailed meeting logistics will follow for confirmed attendees. The event falls under NAICS code 561920, and inquiries should be directed to the AMC Mobility Industry Liaison Office.

Air Mobility Command

POSTED

DEADLINE

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

Same awarding agency

HOSE ASSEMBLY, NONMETALA nonmetallic hose assembly with a 5/8 inch inner diameter and 71 inch length is being procured under solicitation SPE7M0-26-T-013N for a single unit delivery, with a required delivery date of July 15, 2026, and a five-day delivery window after award. The item is identified by NSN 4720-01-268-5326 and must comply with Technical Data Package Rev A Gen 1 per drawing number 81495 7091249 Revision A dated 09/11/1986 and reference SAE J517-2020 as Type 100R2, classifying it as a Type I (Code W) item with a non-extendable 120-month shelf life. The procurement is subject to DLA Packaging Requirements and MIL-STD-2073-1E packaging standards with marking per MIL-STD-129, including special coding for shelf life and Type I designation. The item is designated as critical application and must be shipped via traceable means—parcel post is prohibited—with delivery FOB origin to the specified address in Ronkonkoma, NY. The contract requires full and open competition, prohibits quantity variance, and mandates inspection and acceptance at destination. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and the unit of issue is as defined by authorized DoD standards. The point of contact for the solicitation is Abigail Masterson, and the contract is managed under the Department of Defense’s Maritime Supply Chain ESOC Buys office.

Fabric Coating Mills

POSTED

about 5 hours ago

DEADLINE

CARTRIDGE VALVE SANThe contract is for the procurement of four cartridge valve units with NSN 4730-01-529-5515 under solicitation SPE7M0-26-T-013R, requiring delivery within five days of award, FOB origin, with no tolerance for quantity variance. All items must comply with the DLA Master List of Technical and Quality Requirements, which override any conflicting standards such as ASTM D3951, and must be packaged and labeled per MIL-STD-129 with palletization following RP001 DLA Packaging Requirements. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly permitted by the specification. Packaging must adhere to the specified Unit of Issue and Quantity per Unit Pack, with no use of parcel post; shipment must occur by the fastest traceable means to the designated delivery point in Texarkana, Texas. The contract mandates government identification be removed from non-accepted supplies and includes specific marking requirements for the consignee, freight address, and ship-by instructions with mandatory reference to the provided DLA tracking and code identifiers. The required delivery date is June 29, 2026, with the solicitation response deadline set for July 31, 2026.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 5 hours ago

DEADLINE

CIRCUIT BREAKERThe contract is for the procurement of 50 circuit breakers identified by NSN 5925-01-466-9170, with a delivery requirement of five days after contract award. The solicitation number is SPE7M0-26-T-013D, issued by the Department of Defense’s Maritime Supply Chain ESOC Buys office, with a response deadline of July 31, 2026, and a posting date of July 20, 2026. The procurement is governed by DLA packaging and technical quality requirements referenced through R and I numbers, which are defined in the DLA Master List of Technical and Quality Requirements accessible online. The revision of the master list in effect at the time of solicitation or award controls compliance. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware, except in specific applications such as batteries, fluorescent lights, required instruments, sensors, controls, weapon systems, or chemical analysis reagents explicitly authorized by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment boundary as per NAVSEA 5100-003D. No technical data is available at this center, so the alternate offeror must submit a complete data package covering both the primary and alternate parts. Delivery performance is to be conducted at Bremerton, Washington, and the primary point of contact for inquiries is Rocio Mino.

Other Electric Power Generation

POSTED

about 5 hours ago

DEADLINE

SWITCH, LIQUID LEVELThe contract pertains to the procurement of one unit of a liquid level switch with NSN 5930-01-492-9140, supplied by Babington Technology, Incorporated under a firm fixed price arrangement with no variance allowed in quantity. Delivery is required within 30 days after award, with shipment originating from the supplier and destination inspection and acceptance occurring upon arrival at the specified delivery point. All packaging must comply with DLA’s master list of technical and quality requirements, prioritizing those over ASTM D3951, and must adhere strictly to MIL-STD-129 for marking and labeling. If the item is classified as hazardous per FED-STD-313, packaging must meet TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is acceptable. Palletization must follow RP001: DLA Packaging Requirements for Procurement. The item must be shipped via traceable means, explicitly excluding parcel post, to the delivery address in Boise, Idaho. The government purchase request number is 7017523169, and the required delivery date is July 16, 2026. Contract information is tied to solicitation SPE7M0-26-Q-1079, which was posted on July 20, 2026, with responses due by July 23, 2026. Point of contact for the solicitation is Laurie Wassmuth of the Department of Defense’s Maritime Supply Chain ESOC Buys.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 5 hours ago

DEADLINE

CONNECTOR BODY, RECEThe contract pertains to the procurement of a commercial off-the-shelf connector body, part number 5-582151-2, with NSN 5935-01-320-1623, sourced from TE Connectivity Corporation. Two line items are specified: three units at $3.00 each and four units at $4.00 each, totaling seven units with a combined value of $25.00. Delivery is required within five days from the origin, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply with DLA’s Master List of Technical and Quality Requirements, which supersede ASTM D3951. If the item is non-hazardous under FED-STD-313, it must be packaged in accordance with ASTM D3951; if hazardous, it must follow TQ requirement IP025. All packaging and labeling must adhere to MIL-STD-129, and palletization must follow RP001 DLA packaging standards. The unit of issue is each, and quantity per unit pack is one. Shipping must be via the fastest traceable means; parcel post is prohibited. Delivery must reach the Puget Sound Naval Shipyard in Bremerton, WA, with designated freight and parcel post addresses provided. The original required delivery date is July 17, 2026, under contract SPE7M0-26-T-013M, and the solicitation was posted on July 20, 2026, with a response deadline of July 31, 2026. Government-specific codes and contacts, including the point of contact Rocio Mino, are included for administrative and logistics purposes.

Electronic Connector Manufacturing

POSTED

about 5 hours ago

DEADLINE

HOSE ASSEMBLY, NONMEThis contract specifies the procurement of a nonmetallic hose assembly under solicitation SPE7M0-26-T-013P, with a single unit required and a delivery deadline of five days from the order date. The item, identified by NSN 4720-99-613-8974 and part number P06887800 from Mactaggart, Scott & Co. Ltd, is designated as a critical application item and must be delivered FOB origin with no tolerance for quantity variance. All packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, respectively, and palletization must follow DLA packaging requirements. The shipment is to be sent via the fastest traceable means to the USS Lyndon B. Johnson at West Bath, Maine, with explicit prohibitions against parcel post delivery. Strict environmental and material restrictions apply: ozone-depleting chemicals and mercury or mercury-containing compounds are prohibited unless explicitly exempted for functional uses such as batteries, fluorescent lights, or specified naval instruments, with additional containment requirements for portable mercury-containing devices. Substitute materials require prior approval, and technical and quality standards referenced by R or I numbers are governed by the DLA Master List, with revision control tied to the solicitation or award date depending on acquisition size. The contract is issued by the Department of Defense’s Maritime Supply Chain ESOC, with point of contact Abaigael Masterson and a response deadline of July 31, 2026.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 5 hours ago

DEADLINE

RESISTOR NETWORK, FIXEDThe contract specifies the procurement of a fixed film resistor network with the NSN 5905012185402 and part number M8340108K3320FC, manufactured in accordance with MIL-PRF-83401H Sup 1 and MIL-PRF-83401/8E Rev E, both dated May 29, 2024. This is a critical application item requiring strict compliance with国防部 technical and quality requirements referenced from the DLA Master List, and the use of any Class I ozone-depleting substances is strictly prohibited unless explicit written approval from the Contracting Officer is obtained. The item must be packaged per MIL-STD-2073-1E with marking in accordance with MIL-STD-129, including specific lead finish labeling per IPC/JEDEC J-STD-609 to identify Pb or Pb-free attributes on each unit package. ESD and EMI protection is mandatory, requiring MIL-PRF-81705 qualified packaging materials—Type I barrier material for both ESD and EMI protection, with verification that all materials are sourced from manufacturers listed on QPL-81705. The supplier must ensure physical protection of leads and terminals to prevent damage during handling and transport. Delivery is required within five days FOB origin, with no quantity variance allowed, and inspection and acceptance occur at the destination. The item must be shipped via traceable freight methods, not parcel post, to Robins AFB, Georgia, with the original required delivery date set for July 17, 2026.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 5 hours ago

DEADLINE

LOCK, SECONDARYThe contract pertains to the procurement of one unit of LOCK, SECONDARY with NSN 5930016024015, under solicitation SPE7M0-26-T-013Q, issued by the Department of Defense through the Maritime Supply Chain ESOC Buys. Delivery is required within five days of shipment, with FOB origin terms and no tolerance for quantity variance. Inspection and acceptance occur at the destination, where the item must comply with MIL-STD-2073-1E packaging standards, including specific preservation, wrapping, and container codes, along with MIL-STD-129 marking requirements and DLA palletization guidelines. The supply must be shipped via traceable means, excluding parcel post, to the designated military warehouse at Fort Hood, Texas, with a required delivery date of July 17, 2026. The item is to be delivered to a specific government receiving point identified by the M/F (TCN) W45NQ761910071 and associated codes, and must be properly marked per government specifications with no special labeling. Pricing is set at one dollar per unit, with the total value reflecting the single quantity. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the solicitation.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 5 hours ago

DEADLINE

REDUCER, PIPEThe contract pertains to the procurement of a pipe reducer with NSN 4730-01-668-0509 and part number 1496-DC, supplied by FAIRVIEW FITTING & MANUFACTURING, with an alternate source identified as TRU-HITCH, INC. under part number 02400. The requirement is for a single unit to be delivered within five days of contract award, FOB origin, and is subject to strict compliance with DLA's packaging standards per MIL-STD-2073-1E and marking requirements as specified in MIL-STD-129, including a special marking code indicating the item is open for inspection or use. The procurement is governed by the DLA Master List of Technical and Quality Requirements incorporated by reference, with prohibitions against the use of Class I ozone-depleting chemicals, overriding any conflicting specification language unless explicitly authorized. No shelf life applies to this item, and substitute chemicals must be pre-approved unless already permitted by the underlying specifications. The delivery is directed to Camp Casey in Dongducheon, South Korea, under a rotational force deployment, with shipment governed by DLAD Procurement Notes C19 and C20 regarding transportation and first destination transfers. The unit of issue is each, with a fixed quantity of one, no variance allowed, and inspection and acceptance occurring at destination. The contract number is SPE7M0-26-T-013H, with a required delivery date of July 17, 2026, and the solicitation was posted on July 20, 2026, closing for responses on July 31, 2026. The NAICS code 326122 identifies this as a plastic product manufacturing activity, and the award is for the U.S. Department of Defense through the Maritime Supply Chain ESOB. Government-use only codes and shipping labels are included for logistics tracking and administrative control.

Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 5 hours ago

DEADLINE

GASKETThe contract is for the procurement of 30 gaskets with part number 43008 and NSN 5330-01-171-1371, under solicitation SPE7M0-26-T-012Y, issued by the Department of Defense through the Maritime Supply Chain ESOC Buys office. Delivery is required within five days of award, with the solicitation posted on July 20, 2026, and responses due by July 31, 2026. All supplied items must comply with DLA packaging requirements and technical/quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions. The gasket must be free of asbestos as defined in Fed-Std-313 and must not contain any intentionally added mercury or mercury-containing compounds, except for functional uses in specific applications such as batteries, fluorescent lights, certain instruments, sensors, controls, weapon systems, or chemical analysis reagents specified by NAVSEA. Portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment boundary for the mercury, per NAVSEA 5100-003D. The item is to be delivered to Bremerton, WA 98314-5001, and the primary point of contact for the contract is Rocio Mino at DLA.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 5 hours ago

DEADLINE

CIRCUIT BREAKERThe contract involves the procurement of three circuit breakers with part number QC2050 and NSN 5925-00-262-5723, supplied by Eaton Corporation under solicitation SPE7M0-26-T-013A. The items must be delivered within five days of contract award, FOB origin, with no variance allowed in quantity, and are subject to destination inspection and acceptance. Packaging must comply with MIL-STD-2073-1E, using packaging code Q at level B, with marking adhering to MIL-STD-129 and no special marking required. The delivery address is the SAGAMI STORAGE FACILITY in Sagamihara, Japan, with the same location designated for marking and freight shipping. The unit of issue is each, with a total contract value of $9.00 for the three units, and the required delivery date is July 17, 2026. Technical and quality requirements are referenced from the DLA Master List of Technical and Quality Requirements, and hazardous materials handling must follow DLAD Proc Note C19 and C20. The contract is managed by the Department of Defense’s Maritime Supply Chain ESOC Buys, with Audrey Acuna as the primary point of contact, and the solicitation closes on July 31, 2026.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 5 hours ago

DEADLINE

VOLTMETERThe contract solicits two voltmeters with NSN 6625-01-624-0283 under solicitation number SPE7M0-26-T-013C, with a delivery requirement of five days after delivery order. The item is being procured by the Department of Defense through the Maritime Supply Chain ESOC Buys office, and performance is designated to FPO with ZIP 96306-1204. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements referenced in RP001 and RA001, with revision control tied to the solicitation issue or award date depending on acquisition size. The alternate offeror must submit a complete data package including specifications for both the approved and alternate parts. The solicitation was posted July 20, 2026, with a response deadline of July 31, 2026, and falls under NAICS code 334515 for other measuring and controlling device manufacturing. Primary point of contact is Gerard Quinn, reachable via email and phone provided, and further details are available through the DIBBS system. Government identification must be removed from any non-accepted supplies in accordance with RQ011.

Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

about 5 hours ago

DEADLINE