This Government Contract opportunity from Department Of Defense was posted on September 18, 2019. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

HP T7100 Maintainence

Awarded

M6700119Q1233Federal

Submission Closed09/17/2019, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811212

New

Federal

Control-Display Unit (CDU) Repair and Overhaul ServicesThis subcontract, issued by Navsup Weapon Systems Support under the Department of Defense, involves the technical tear-down, evaluation, and repair of the Control-Display Unit (NSN 6110-016477412). The scope of work focuses on internal circuitry repair, modification, and testing for part number 822-2463-001 using specialized diagnostic equipment to ensure the delivery of a certified Ready for Issue unit. The project requires strict adherence to Buy American and Balance of Payments Program standards. Interested parties must note that the response deadline is November 19, 2026, and the services fall under NAICS code 811212.

Navsup Weapon Systems Support

POSTED

DEADLINE

Digital Computer Repair & Component-Level ModificationThis subcontract, issued by Navsup Weapon Systems Support under the Department of Defense, involves the technical repair and component-level modification of a specific digital computer, NSN 1680-01-541-3692 RV. The scope of work requires the contractor to perform a complete unit teardown, evaluate the hardware against technical requirements, and execute necessary modifications to restore full functionality. These tasks must be completed using specialized jigs, fixtures, and test equipment to ensure the unit is fully repaired, tested, and inspected. The project mandates strict adherence to MIL-STD-2073 packaging standards and compliance with Buy American requirements. The final deliverable is one fully restored digital computer. Interested parties should note the response deadline of November 19, 2026, and the classification of the work under NAICS code 811212.

Navsup Weapon Systems Support

POSTED

DEADLINE

Receiver-Transmitter Repair and OverhaulThis subcontract involves the teardown, evaluation, repair, and modification of naval receiver-transmitters for prime contractors supporting U.S. Navy NAVSUP Weapon Systems Support projects. The scope of work includes disassembling, cleaning, and inspecting units, followed by component-level repair and replacement. All work must be tested according to approved manuals and IPC/EIAJ-STD-001C standards, requiring the use of specialized electronic test and measurement equipment and NAVSUP WSS Source Approval. The primary objective of the contract is the delivery of six serviceable, ready-for-issue receiver-transmitters under NSN 5821-01-585-5355 P8. This effort falls under NAICS code 811212 and is managed by the Department of Defense. The response deadline for this opportunity is November 19, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Power Supply Amplifier Overhaul and RepairThis subcontract for the Department of Defense and Navsup Weapon Systems Support involves the overhaul and repair of Power Supply Amplifiers. The scope of work includes the teardown, evaluation, and modification of units to identify failed components and replace internal parts that exceed repair manual limits. All work must be performed in accordance with IPC/EIAJ-STD-001C and MIL-STD-454 standards to ensure the units are returned to a Ready for Issue condition. The project requires the delivery of six Power Supply Amplifier units and necessitates NAVSUP WSS Source Approval for the performing contractor. Interested parties should note the response deadline of November 19, 2026, and the classification of the work under NAICS code 811212.

Navsup Weapon Systems Support

POSTED

DEADLINE

Control-Display Unit Repair and OverhaulThis subcontract involves the technical repair, overhaul, and upgrade of Control-Display Units under NSN 6610-01-670-1033 for prime contractors supporting Navsup Weapon Systems Support projects. The selected provider will be responsible for executing detailed overhaul procedures, inspections, and testing to ensure all units are returned to Ready for Issue condition. Additionally, the scope includes the development of performance specifications and repair procedures to maintain operational standards. To qualify for this effort, the contractor must possess the necessary testing equipment for the specific NSN and hold NAVSUP WSS Source Approval. The primary objective is the delivery of certified RFI units. This opportunity is categorized under NAICS code 811212 and is managed by the Department of Defense.

Navsup Weapon Systems Support

POSTED

DEADLINE

Radar Transmitter Maintenance and Restoration ServicesThe Radar Transmitter Maintenance and Restoration Services subcontract involves the teardown, evaluation, and repair of radar transmitter end items supporting the USAF 448th Supply Chain Management Wing. The scope of work includes conducting test, teardown, and evaluation, replacing failed components, and performing cleaning and reassembly in accordance with MIL-HDBK-454C and T.O. 1-1-691. Additionally, the contractor must apply corrosion treatment following MIL-STD-1568E and provide final serviceable end items along with detailed reports. This project is managed under the Department of Defense and requires strict adherence to technical standards, including the use of ESD-protected environments and CMMC Level 2 compliance. Interested parties must respond by November 5, 2026, for this effort categorized under NAICS code 811212.

POSTED

DEADLINE

Aviation Processor Repair and Overhaul ServicesThe Aviation Processor Repair and Overhaul Services subcontract involves the teardown, evaluation, repair, and modification of Processor, Display A units for prime contractors supporting U.S. Navy NAVAIR projects. Managed under the Department of Defense and Navsup Weapon Systems Support, the scope of work includes disassembling processors to identify failed components, replacing faulty circuitry, updating firmware, and performing precision soldering. All work must be conducted in ESD-safe facilities using aviation-grade diagnostic tools to ensure rigorous environmental and performance testing. The primary objective of the contract is to deliver serviceable hardware returned to Ready For Issue condition. This opportunity falls under NAICS code 811212, with a response deadline of November 19, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Antenna Coupler Repair and Testing ServicesThis subcontract for Antenna Coupler Repair and Testing Services supports NAVSUP WSS and NAVAIR projects through the Department of the Navy. The scope of work involves the complete teardown, evaluation, and repair of antenna couplers, including the identification of failures and the replacement of internal components according to Rockwell Collins Drawing 822-1706-002. All units must undergo functional testing, be marked in accordance with MIL-STD-130, and be packaged per MIL-STD-2073 before final delivery. Performance will take place in Philadelphia, and the contractor must maintain ISO 9001 or AS9100 certification along with ANSI/NCSL 2540 calibration. Interested parties should note the response deadline of November 19, 2026. The project falls under NAICS code 811212 and requires the delivery of fully repaired and certified equipment.

Navsup Weapon Systems Support

POSTED

DEADLINE

Industrial and Commercial Weigh Scale Maintenance ServicesAlliance Facility Solutions Inc. is seeking a subcontractor to provide industrial and commercial weigh scale maintenance services for CBRE facility projects throughout British Columbia. The scope of work involves performing essential maintenance, calibration, and safety inspections, including preventative and seasonal tasks conducted in accordance with manufacturer procedures and the Weights and Measures Act of Canada. The primary objective is to ensure all scales are certified and operational while ensuring all CMMS work orders are properly closed. To qualify for this subcontract, providers must hold Measurement Canada certification, maintain Tier 3 Achilles status, and demonstrate full compliance with WorkSafeBC regulations. Interested parties must submit their responses by November 3, 2026, to support these critical facility operations within the province.

Alliance Facility Solutions Inc.

POSTED

DEADLINE

Nutanix Enterprise Support and MaintenanceThe Nutanix Enterprise Support and Maintenance subcontract involves providing technical support and maintenance for prime contractors working on public safety projects for the Town of Stratford. The scope of work includes delivering software support and hardware maintenance contracts managed through the Nutanix Support Portal, with a strict requirement for the provider to maintain authorized Nutanix partner status and operate a local or accessible service center. Managed by DAS Procurement for the state of Connecticut, the contract emphasizes adherence to specific service level agreements and life cycle costing. Interested parties must submit responses by October 30, 2026, to provide the necessary active support contracts and maintenance agreements under NAICS code 811212.

POSTED

DEADLINE

IBM TS3500 Tape Library Accessor Repair and InspectionThis subcontract involves the inspection and repair of IBM TS3500 (3584) tape library accessors to support projects for the City of Philadelphia Office of Innovation & Technology. The scope of work requires specialized expertise in IBM TS3500 architecture to perform comprehensive inspections of grippers, X/Y axis motors, belts, pinions, PDC cards, and bumpers. These technical services are specifically aimed at resolving error codes 48A0 and 4891 to ensure the tape library is fully operational for data migration. The project is located in Philadelphia and falls under NAICS code 811212. Interested parties should note the response deadline of October 23, 2026. The primary objective of the engagement is to restore critical hardware functionality to facilitate seamless data movement for the agency.

Office of Innovation & Technology (oit)

POSTED

DEADLINE

DiagnostX System Maintenance and Technical SupportThe DiagnostX System Maintenance and Technical Support subcontract involves providing ongoing technical assistance and maintenance for prime contractors managing Broward County health projects. The scope of work focuses on the DiagnostX Waveform Analyzer and Remote Receiver systems, requiring the contractor to perform technical troubleshooting, preventative maintenance, and necessary software updates. To ensure quality and compliance, the service provider must hold an OEM certification from Locus Diagnostics, LLC. Key deliverables for this engagement include the submission of detailed maintenance logs and the verification of system uptime. Interested parties should note that the solicitation was posted on October 19, 2026, with a response deadline of October 23, 2026. The contract falls under NAICS code 811212 and is managed through the Broward County procurement system.

Broward County

POSTED

2 days ago

DEADLINE

in 3 days

AI Contract Overview

The Fleet Readiness Center East at MCAS Cherry Point, North Carolina, requires maintenance services for HP T7100 printers. This requirement is designated as a 100 percent set-aside for small business concerns under NAICS code 811212, which carries a size standard of 27.5 million dollars. Interested contractors must maintain current registrations in the System for Award Management and the Wide Area Workflow invoicing system to be eligible. For further inquiries, the primary point of contact is Contract Specialist Helene Klug, with Contracting Officer Christopher Poulos serving as the alternate contact.

General Info

Agency

Department Of Defense → Commanding Officer

Contract Value

$14,880

NAICS

811212 - Computer and Office Machine Repair and Maintenance

Place of Performance

Fleet Readiness Center East, CHERRY POINT, NC, 28533, USA

Set-Aside

NONE

Awardee

Dynamic Advantage Inc. 100E Old Country Rd STE 5 MINEOLA NY 11501 USA

Award Issued Date

09/17/2019, 12:00:00 AM UTC

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

1 update

PhaseAwarded

PostedJul 10

Combined Synopsis

Notice updatedAug 8

Response deadline changed from Jul 16, 2019 to Aug 20, 2019. Set-aside removed. The notice description changed.

AwardedSep 17

Contract was awarded

Submission Closed

09/17/2019, 12:00:00 AM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Commanding Officer

Contacts2 people available

OfficeCHERRY POINT, NC, 28533-0018, USA

Organization / AgencyDepartment Of Defense → Commanding Officer

Office AddressCHERRY POINT, NC, 28533-0018, USA

Contacts

Helene M. Klugcontract specialist

contact@example.gov

+1 (555) 000-0000

Christopher PoulosContacting Officer

contact@example.gov

+1 (555) 000-0000

Full Description

The Fleet Readiness Center (FRC) East, MCAS Cherry Point, NC has a requirement for HP T7100 Printer Maintainence The proposed contract action is 100% set-aside for small business concerns. The North American Industry Classification System (NAICS) code for this requirement is 811212 with a corresponding size standard of 27.5$m Contractors interested in doing business with the government must be registered in the System for Award Management (SAM) and ensure their annual representations and certifications are current in SAM. Contractors must also be registered in the Wide Area Workflow (WAWF) invoicing system at https://wawf.eb.mil/ . Primary point of contact for questions relating to this requirement is (Helene Klug), Contract Specialist, e-mail Helene.Klug@usmc.mil Alternate point of contact is Christopher Poulos), Contracting Officer, e-mail christopher.poulos@usmc.mil