Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Hydraulic Pump Supply (NSN 5930-00-168-1337 / Part No: 11007849-100)

Active

International

Response Deadline09/09/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the supply of a single hydraulic pump unit designated for use in armament loader systems, identified by NSN 5930-00-168-1337 and part number 11007849-100. The contractor is responsible for providing the unit with complete packaging, proper labeling, and timely delivery to Canadian Forces Support Detachments located in Montreal or Edmonton. The work falls under NAICS code 333912, indicating it relates to the manufacturing of industrial machinery for specialized applications. All requirements must be fulfilled in accordance with government standards for defense equipment and logistics. The solicitation was posted on July 27, 2026, with a response deadline of September 9, 2026, at 7:00 PM Eastern Time. The contract is classified as a subcontract under the Department of National Defence, Government of Canada, and the place of performance covers the provinces of Alberta and Quebec, excluding the National Capital Region. The procurement is part of ongoing efforts to support military equipment readiness across designated Canadian Forces locations.

General Info

Supply of single hydraulic pump unit for Canadian Forces in Montreal or Edmonton by September 9, 2026.

Agency

Government of Canada → Department of National DefenceView Agency

NAICS

333912 - Air and Gas Compressor ManufacturingView NAICS

Place of Performance

Alberta, Quebec (except NCR), CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 27

subcontract

Response DeadlineSep 9

Submission deadline

Response Deadline

09/09/2026, 07:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGovernment of Canada → Department of National Defence

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Canada → Department of National Defence

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of one hydraulic pump unit for armament loader systems, including packaging, labeling, and delivery to Canadian Forces Support Detachments in Montreal or Edmonton.

Similar Contracts

Same NAICS industry code

SEAL ASSEMBLY, SHAFT, SP

Solicitation # SPE7M1-26-Q-1304

The seal assembly is a shaft-loaded, spring-loaded mechanical seal requiring pure carbon material proprietary to Morgan Advanced Materials, specifically Cage 80894, as defined by Drawing 5773203, Sheet 26. Manufacturing must comply with NAVSEA 5773203, Piece No. 10A, Sheets 26 and 30, with specified deviations: the outer shell must conform to Ram Seal Drawing 01-250159 Rev B, the drive band to Ram Seal Drawing 11-250159 Rev B, and the spring retainer to Ram Seal Drawing 12-250259 Rev A. Each unit must include an installation kit featuring specified O-rings with precise part numbers and quantities, plus a single 2-inch steel spanner wrench with a .250-inch pin, compliant with Fed Spec GGG-W-665 Type 2 Grade A. All deliveries are subject to mandatory Certificate of Quality Compliance (COQC) for each manufacturing lot, furnished in hard copy and uploaded electronically to the iRAPT system, with Government inspection rights at origin and product verification testing enforceable per DLAD 52.246-9004. Technical and quality requirements referenced under RA001, RP001, RQ011, RD003, and RQ002 apply, including configuration control, packaging, removal of government identification, and defense information handling. The contract is a total small business set-aside under NAICS 333912, awarded under solicitation SPE7M1-26-Q-1304 for 104 units, with a 30-day delivery window and point of contact via the Department of Defense Maritime Supply Chain.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M1-26-T-237Q

The contract specifies the procurement of piston rings identified by part number 18-20420-8R1 and NSN 4310017062926, with a total quantity of four units divided into two line items: two units at $4.00 each and two units at $2.00 each, both totaling $12.00. Delivery is required within 20 days FOB destination, with no tolerance for quantity variance—exactly four units must be delivered. All items must be prepared for shipment in compliance with MIL-STD-2073-1E packaging standards, marked according to MIL-STD-129, and palletized per DLA’s RP001 requirements. Special marking is not required. Shipment must be sent via the fastest traceable method, strictly prohibiting parcel post, and delivered to the USS HYMAN G RICKOVER (SSN 795) at FPO AE 09591. The original required delivery date is July 27, 2026, and the contract is governed by Department of Defense logistics procedures including DLA Procurement Notes C19 and C20 for transportation. The solicitation number is SPE7M1-26-T-237Q, under NAICS code 333912, and the point of contact for inquiries is Michael Reese at DLA.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M1-26-T-237P

The contract is for one piston ring with part number 18-20419-12R1 and NSN 4310-01-706-4138, issued by the Defense Logistics Agency under solicitation SPE7M1-26-T-237P. Delivery is required within 20 days of contract award, with shipments to be delivered FOB destination to the USS HYMAN G RICKOVER (SSN 795) at FPO AE 09591. No variance in quantity is permitted, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129 with no special marking codes. Palletization must follow DLA’s RP001 packaging requirements, and parcel post is prohibited—shipment must be sent by the fastest traceable means. The required delivery date is July 27, 2026, and the contract is assigned to DLA vendors who must use the VSM system for fulfillment. The item falls under NAICS code 333912 and is procured by the Department of Defense through the Maritime Supply Chain office.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M1-26-T-237L

The contract pertains to the procurement of one piston ring, part number 18-20416-7R1 and NSN 4310-01-706-3788, under solicitation SPE7M1-26-T-237L, with a required delivery within 20 days of award to the USS HYMAN G RICKOVER at FPO AE 09591. The item must be delivered FOB destination with zero variance in quantity and is subject to inspection and acceptance at the delivery point. Packaging must comply fully with MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking codes applied. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with revision control tied to the solicitation or award date depending on acquisition size. Supplier shipment must be made via the fastest traceable means, excluding parcel post, using the V27157 vendor code and RDD 777 for logistics tracking. The contract specifies the unit of issue as each, priced at one dollar, with total price reflecting the single unit. The supplier is directed to use VSM for DLA shipments, and the procurement is tied to project JK5 TP 3 under supply chain support code YNEA01. All delivery logistics, transportation procedures, and compliance are bound by DLA procedural notes C19 and C20, and the contract includes a required delivery date of July 27, 2026.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

RING, COMPRESSOR

Solicitation # SPE7M4-26-T-291L

The contract pertains to the procurement of six compressor rings with NSN 4310-01-061-1286 and part number 8234B, supplied by Curtiss-Wright Electro-Mechanical Corp and Dresser-Rand Co, under solicitation SPE7M4-26-T-291L. The item is designated as a critical application component and must comply with stringent DLA packaging and technical requirements, including adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with no special marking required. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for specific permitted uses such as batteries, lighting, instruments, sensors, controls, weapon systems, and chemical reagents specified by NAVSEA, with portable devices containing mercury requiring shockproof construction and a secondary containment boundary as specified in NAVSEA 5100-003D. The items must be delivered FOB origin within 57 days of contract award, with a required delivery date of August 4, 2026, and a zero tolerance for quantity variance. All deliveries must be addressed to the DLA Distribution facility in New Cumberland, Pennsylvania, following designated transportation protocols outlined in DLAD Proc Notes C19 and C20. The unit of issue is each, with a unit price of $6.00, resulting in a total contract value of $36.00, and technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements accessible via the DLA website, with revisions as of the solicitation issue date controlling unless amended.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Final Assembly, Testing & Vacuum CertificationThe contract involves the final assembly, testing, and vacuum certification of rotary feedthrough components, with a focus on integration and performance validation under vacuum conditions. Key activities include leak testing to ensure system integrity and encoder calibration to guarantee precise rotational feedback, both critical for operational reliability in space environments. This work is part of a subcontract under NASA’s Shared Services Center, aligned with NAICS code 333912 for other commercial and industrial machinery manufacturing, and must be completed by the response deadline of August 3, 2026. The performance is expected to meet stringent vacuum and precision standards required for NASA missions, though specific locations and point of contact details are not provided.

NASA Shared Services Center

POSTED

DEADLINE

66A Rotary feedthrough for VOiD deposition system

Solicitation # 80NSSC26938965Q

NASA/NSSC is seeking to award a sole source contract to KURT J LESKER CO for the 66A Rotary feedthrough required for a VOiD deposition system, as it has been determined that this vendor is the sole provider of this specific component. The procurement will be conducted under FAR Part 12 as a commercial item acquisition, with performance taking place at NASA’s Glenn Research Center. The NAICS code for this effort is 333912, and the solicitation number is 80NSSC26938965Q. Although this is not a request for quotes and price submissions will not be reviewed, interested organizations may submit written capability and qualification statements by 9:00 a.m. Central Standard Time on August 3, 2026, solely to assist the government in determining whether to pursue competitive bidding. All correspondence must reference the contract ID to ensure proper tracking. Oral communications are prohibited, and the NASA FAR Supplement Clause 1852.215-84 on the Ombudsman applies. The primary point of contact is Monica Wilson, Procurement Assistant, with Karen Artis as the secondary contact. The contract will not utilize any set-aside programs.

NASA Shared Services Center

POSTED

DEADLINE

AMSA 21 Pressure Washer

Solicitation # W911S226U3856

The U.S. Department of Defense through the Office of W6QM Micc-Ft Drum is soliciting offers for the AMSA 21 Pressure Washer under solicitation number W911S226U3856, a combined solicitation set aside exclusively for small businesses as defined by the Small Business Administration. The requirement is classified under NAICS code 333912, indicating it pertains to the manufacturing of other agricultural, construction, and mining machinery. The solicitation was posted on July 29, 2026, with a firm deadline for submissions on August 4, 2026, at 4:00 PM Eastern Time. The contract will be awarded and performed at a location with a zip code of 08640, though specific city and state details for performance are not provided. The primary point of contact for inquiries is Guillermo Ramos, reachable via email at guillermo.ramos1.civ@army.mil or by phone at 609-562-7558, and the official solicitation can be accessed through the SAM.gov portal.

W6QM Micc-Ft Drum

POSTED

DEADLINE

Pressurized Gas Delivery System IntegrationMississippi State University is seeking a subcontractor to supply and integrate a regulated pressurized gas system, such as carbon dioxide or nitrogen, designed to deliver consistent spray pressure and precise dosing for research applications. The system must meet strict industry standards for reliability and control, ensuring accurate and repeatable performance in sensitive laboratory environments. The contract is open for submission with a response deadline of August 11, 2026, and falls under NAICS code 333912, indicating involvement in industrial machinery manufacturing. The place of performance and exact location details are not specified, but the work is expected to align with the university’s research infrastructure needs. All proposals must be submitted by the stated deadline to be considered, and no set-aside provisions are indicated for this solicitation.

MISSISSIPPI STATE UNIVERSITY

POSTED

DEADLINE

Centrifugal Pump Manufacturing and SupplyOne unit of a centrifugal pump identified by NSN 4320-01-723-2413 must be manufactured or supplied to meet exact military specifications for form, fit, and function, ensuring full compatibility with existing defense systems. The delivery deadline is strictly within 20 days after contract award, emphasizing urgency and precision in production and logistics. This subcontract is issued under the NAICS code 333912 for pump and pumping equipment manufacturing, with the Maritime Supply Chain organization acting on behalf of the Department of Defense. The place of performance is designated as FPO with ZIP code 34088-3000, indicating a military postal address likely tied to overseas or maritime operations. The solicitation closed on July 31, 2026, and was posted on July 28, 2026, with a narrow window for proposal submission, reflecting a targeted procurement process. The contract is managed through the DIBBS system under reference SPE7M126T2930.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

in about 23 hours

DISCONNECT ASSEMBLY

Solicitation # SPE4A6-26-T-07VS

The contract pertains to the procurement of two Disconnect Assembly, Compressor units with part number 2210191-1 and NSN 4310013195804 under solicitation SPE4A6-26-T-07VS, issued by the ASC Commodities Division of the Department of Defense. Delivery is required to DLA Distribution Cherry Point in North Carolina within 672 days after award, with a firm delivery date of May 31, 2028, under FOB Origin terms and a zero percent quantity variance. The items must be manufactured and inspected in full compliance with the DLA Master List of Technical and Quality Requirements, which supersedes all other referenced standards including ASTM D3951. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 using a zero-defect acceptance criterion unless otherwise specified, with attributes categorized as critical, major, or minor assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Item Unique Identification is waived per DFARS 252.211-7003(c)(1)(i), but physical bare item marking must adhere to RQ017 requirements. Packaging and labeling must conform strictly to MIL-STD-129 and RP001 DLA Packaging Requirements for Procurement, including palletization, with unit of issue as EA and quantity per unit pack as specified. All hazardous materials require compliance with 29 CFR 1910.1200, including pre-award submission of Safety Data Sheets and labeling per MIL-STD-129, while items containing radioactive materials exceeding specified thresholds must be distinctly marked. Inspection and acceptance occur at the destination, with government oversight per FAR 52.246-2. Invoicing is mandatory through Wide Area WorkFlow (WAWF), and the contract incorporates multiple FAR and DFARS clauses including those on cost-type contracting, cybersecurity, trafficking in persons, subcontracting, and safeguarding of defense information. Deviations 2026-O0015 and 2026-00038 have been applied to subcontracting clauses, and the contracting officer retains authority to modify pricing and conditions per DFARS 252.243-7001. Offerors must be

ASC COMMODITIES DIVISION

POSTED

DEADLINE

in about 23 hours

PUMP, CENTRIFUGAL

Solicitation # SPE7M1-26-T-183S

The contract is for the procurement of one centrifugal pump, identified by NSN 4320017232413 and AMPCO part number ZC2 2X2, designated as a critical application item. The customer must supply the serial number of the existing pump to ensure precise compatibility in form, fit, and function. Delivery is required within 20 days of order award, with a target delivery date of June 30, 2026, under FOB origin terms, and acceptance occurs at the destination location in San Diego, California. The unit of issue is one each, with a total contract value of $1.00. Packaging must conform to MIL-STD-2073-1E and palletization must follow DLA RP001 requirements, with marking fully compliant with MIL-STD-129 and no special markings required. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced via RA001, and all standards apply as of the award date. The pump must be shipped to the Military Sealift Command BATS facility and transportation is subject to DLAD procedural notes C19 and C20. Invoicing and payment processing must occur through the Wide Area WorkFlow system, and no alternative invoicing methods are permitted. The solicitation number is SPE7M1-26-T-183S, issued under the Department of Defense, with responses due via DIBBS by July 31, 2026. Multiple Federal Acquisition Regulation clauses are incorporated, including those related to cybersecurity, hazardous materials, employment eligibility, trafficking in persons, sustainable products, and safeguarding defense information, with several deviations approved under deviation number 2026-00038. The contract includes mandatory representations from offerors regarding entity identification, socioeconomic status, and compliance with federal restrictions on covered defense telecommunications equipment. No options, key personnel requirements, or security clearances are specified. Compliance with packaging, marking, and technical standards is mandatory, and inspection and acceptance are performed by the government at the destination.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

in about 23 hours

More opportunities from Government of Canada → Department of National Defence

Same awarding agency

Catering Services for BNQ in Halifax NS

Solicitation # W3371-26-T007

The Government of Canada, through the Department of National Defence, is soliciting offers for catering services at HMCS Scotian in Halifax, Nova Scotia, to support the Royal Canadian Navy. The opportunity, identified by solicitation number W3371-26-T007, was posted on July 29, 2026, with a response deadline of August 10, 2026. Offerors are expected to deliver comprehensive meal services tailored to the operational needs of naval personnel stationed at the facility, ensuring food quality, safety, and timely service in alignment with military standards. The contract is open to eligible contractors without specific set-aside provisions, and all proposals must meet the requirements outlined in the solicitation. Timothy Pelletier serves as the primary point of contact for this solicitation, reachable via email at timothy.pelletier@forces.gc.ca or by phone at 902-427-4428. Offers must be submitted electronically through the Canada Buys portal, where full details of the tender are available. Performance of the services will be conducted exclusively at HMCS Scotian in Halifax, and successful bidders will be required to comply with all federal procurement regulations, operational protocols, and health and safety standards applicable to government installations. The contract aims to secure a reliable, high-quality catering provider capable of sustaining operations in a secure, mission-critical environment.

POSTED

DEADLINE

Catering Services for BNQ in Quebec, QC

Solicitation # W3371-26-T008

The Government of Canada, through the Department of National Defence, is soliciting offers for catering services at HMCS Montcalm in Québec, Québec, to support the Royal Canadian Navy. The solicitation, identified as W3371-26-T008, was posted on July 29, 2026, with a response deadline of August 10, 2026, at 8:00 PM Eastern Time. Offerors are expected to deliver comprehensive food services tailored to the operational needs of naval personnel stationed at the facility, ensuring meals meet nutritional, safety, and logistical standards required in a military environment. The contract is open to eligible parties under federal procurement guidelines, with no specified set-aside for small or diverse businesses. Timothy Pelletier serves as the primary point of contact for this solicitation, providing assistance and clarification to interested parties via email at timothy.pelletier@forces.gc.ca or by phone at 902-427-4428. All services must be performed at HMCS Montcalm in Québec, and offers must fully address the scope, staffing, menu planning, supply chain management, and compliance with federal health and safety regulations. Proposals submitted after the deadline will not be considered, and bidders are encouraged to review the official tender page on CanadaBuys for additional procedural details and requirements.

POSTED

DEADLINE

SAR Vacuum Spine Boards

Solicitation # W3999-270001

The Department of National Defence is seeking to procure twenty-seven lightweight vacuum spine boards under solicitation W3999-270001, with all deliverables required to be received by 5 October 2026 and the contract period running until 5 December 2026. The spine boards must be approximately six feet in length,具备 a chambered vacuum bead system for enhanced immobilization during airlift, vertical rescue, and austere SAR operations, and must be radiolucent, MRI-compatible, latex-free, and resistant to puncture, abrasion, moisture, and bodily fluids. Each unit must include a manual vacuum pump with no external power requirement, a complete restraint strap system, integrated carry handles for multiple lifting configurations, and be compactly foldable or rollable for aircraft storage. The product must be compatible with existing rigid spine boards and the Ferno Cot transport system. All items must be new, conform to the latest specifications, and be delivered Delivered Duty Paid to CFB Winnipeg 17 Wing, 715 Wihuri Road, Winnipeg, Manitoba, under Incoterms 2020, with all customs duties, GST/HST, and excise taxes included in the quoted price. Payment will be made at a fixed price upon delivery, with undisputed invoices settled within 30 days of receipt, subject to a mandatory 15 percent tax withholding by the Canada Revenue Agency. Award will be made to the lowest priced compliant offer, with all submissions evaluated against mandatory technical criteria; failure to meet any of these criteria results in non-responsiveness. Proposals must be submitted electronically in three sections—Technical Offer, Financial Offer, and Offer Submission Forms—with supporting documentation in either English or French, and must remain valid for 60 days beyond the closing date of 25 August 2026. Offers may not exceed five megabytes unless submitted across multiple emails, and must avoid embedded scripts or macros. The Contractor must certify compliance with Canada’s Code of Conduct for Procurement, lack of conflict of interest, and that goods are not produced using forced labor. The Contractor is also required to maintain valid AIEE status, use environmentally preferable packaging where feasible, and ensure all packaging materials are reusable, returnable, or recyclable, excluding packaging tape. The contract is governed by the laws of Manitoba, requires written amendments, prohibits assignment without Canada’s consent, and includes a 12-month warranty. The Contracting Authority is Adam Bidzinski

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

Digital Feasibility Study of a solid-state hydrogen-powered Light Armoured Vehicle (LAV)

Solicitation # W8486-270848/A

The Department of National Defence is seeking a single contractor to conduct a digital feasibility study for a solid-state hydrogen-powered Light Armoured Vehicle with a maximum weight of 45,000 lbs, under contract number W8486-270848/A. The study must focus exclusively on the powertrain configuration, including SWaP analysis and platform configurations for 4x4, 6x6, 8x8, and tracked designs, with deliverables including 3-D CAD models, a project schedule, mission profile, draft and final reports, and a project presentation. The work must be completed by March 20, 2028, under a two-year initial contract term with a ceiling value of $1,200,000, split between $500,000 for fiscal year 2026/27 and $700,000 for 2027/28. Payment is cost-reimbursable based on milestone achievements, with invoices required upon completion of each deliverable and payment issued within 30 days of receipt of a compliant invoice. Bidders must have a valid Business Number, submit offerings in three distinct sections—technical, financial, and declaration forms—and adhere to strict evaluation criteria that prioritize project management certification (15 points), proven experience in three or more relevant projects (30 points), and prior work on military vehicle platforms. The proposal must include an Offeror Declaration Form and satisfy mandatory requirements identified with "must" or "mandatory," with failure to meet any disqualifying the bid. All submissions must be sent exclusively through the SAP Business Network, and inquiries must be directed to Mariam Isak at mariam.isak@forces.gc.ca. The contract prohibits contingency fees, requires compliance with applicable laws and the Procurement Code of Conduct, and mandates detailed recordkeeping of all costs and correspondence. While no security clearances are required, the contractor must maintain records in machine-readable formats and comply with Treasury Board policies regarding contracts with former public servants. The work will be performed in the National Capital Region, and materials may be submitted in either English or French.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

TBIPS - Implementation and Deployment of Cloud Analytics Solutions

Solicitation # W6369-24-P5PN

The Directorate Joint Defence Cloud Program (DJDCP) seeks informatics professionals to support the implementation and deployment of cloud analytics solutions for the Department of National Defence and Canadian Armed Forces, advancing the transition from traditional on-premises IT to secure, modern cloud-based services. The contract, solicited under W6369-24-P5PN and titled “TBIPS - Implementation and Deployment of Cloud Analytics Solutions,” focuses on hands-on technical support for cloud environment setup, platform management, operational troubleshooting, and the delivery of business solutions aligned with DND/CAF modernization goals. Performance is centered in the National Capital Region, primarily Ottawa, with work conducted at government or contractor sites as directed, and all activities must comply with stringent Canadian security protocols including PROTECTED, CONFIDENTIAL, SECRET, and TOP SECRET classification requirements. Contractors must hold a SECRET-level facility security clearance, and all personnel accessing classified information must possess at least RELIABILITY STATUS or SECRET clearance depending on role, with no use of personal devices permitted and no processing or storage of classified material allowed without prior written authorization from the Contract Security Program. Evaluation is based on a merit-based trade-off methodology, with technical merit weighted at 90% and price at 10%, requiring a minimum pass mark of 120 out of 150 points across seven key criteria including previous contract value, experience with cloud adoption and modernization, cloud service provider partnerships, and enterprise cloud analytics expertise. Proposals must be submitted in three bound volumes—Technical, Financial, and Certifications—with electronic formats limited to .pdf, .doc, and .xls files, and hard copies required to use recycled paper and environmentally sustainable practices. Contractors must certify compliance with the Federal Contractors Program for Employment Equity, provide detailed information on proposed personnel including language proficiency, availability, and potential conflicts from multi-contract engagements, and submit a Certificate of Independent Bid Determination. Payment terms extend to 180 days, with disbursement via direct deposit, wire transfer, EDI, or LVTS, and quarterly financial reporting is mandatory. The contract has a fixed two-year term with no option periods, and replacement of key personnel requires a formal remediation plan within 10 working days. All deliverables, including monthly progress reports and technical documentation, must be submitted in editable Microsoft Office formats and are subject to government inspection and acceptance at DND facilities or contractor locations.

Computer Facilities Management Services

POSTED

DEADLINE

E60HN-16ELEC – Stream 2 - Oscilloscope and multimeters (Atlantic)

Solicitation # W7702-2026-00644-A

This contract, E60HN-16ELEC – Stream 2 – Oscilloscopes and Multimeters (Atlantic), is issued by the Department of National Defence under the Government of Canada to procure electronic test equipment exclusively for use in the Atlantic region, specifically targeting procurement activities centered in Halifax, Nova Scotia. Only suppliers who have successfully qualified under Stream 2 of the Electronic Products Supply Arrangement are eligible to participate, with a pre-approved list of 25 vendors including Anixter Canada Inc., Graybar Canada, Nedco-Rexel, TestEquity, RS Americas (Canada), and others, all of whom are authorized to provide oscilloscopes, multimeters, and related electronic measurement devices. The Crown maintains the flexibility to negotiate directly with any of these qualified suppliers to meet immediate or specific operational requirements without requiring full competitive bidding for each individual purchase. The solicitation is formally identified by number W7702-2026-00644-A, was posted on July 29, 2026, and bids must be submitted by August 13, 2026. The procurement falls under a federal government framework with no set-aside classification, emphasizing efficiency and pre-vetted supplier access rather than open competition. Courtney Smart, Contracting Authority, serves as the primary point of contact for all inquiries and submissions. The contract structure ensures rapid access to high-quality, calibrated electronic test equipment critical to defence operations, while maintaining accountability through a restricted supplier pool already vetted for technical capability and service standards.

Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

DEADLINE

NPP-Catering Services for BNQ in Quebec, QC

Solicitation # W3371-26-T008_NPP

The Government of Canada, through the Department of National Defence, is soliciting offers for catering services to be provided at HMCS Montcalm in Québec, QC, to support the Royal Canadian Navy. The solicitation, identified as W3371-26-T008_NPP, was posted on July 29, 2026, with a deadline for responses set for August 10, 2026. Offerors must be prepared to deliver comprehensive food services tailored to the operational and logistical needs of military personnel stationed at the facility. The contract is a federal procurement initiative with no specific set-aside designation, open to all eligible vendors who can meet the required standards for quality, safety, and consistency in meal service. Timothy Pelletier serves as the primary point of contact for this solicitation, reachable via email at timothy.pelletier@forces.gc.ca or by phone at 902-427-4428, and holds the role of Contracting Authority. All performance of the services must take place at the designated location in Québec City, Québec, with no alternative venues permitted. Potential bidders are directed to the official Canada Buys portal for full details and documentation related to the tender. The contract represents a key support function for naval operations, requiring reliable, high-volume catering capabilities that align with government regulations and military standards.

POSTED

DEADLINE

RCAF SARTech GPS Watches

Solicitation # W8485-279541/A

The Department of National Defence is soliciting bids for the procurement of 240 commercial off-the-shelf ruggedized wearable GPS tracking devices and 240 corresponding tactical replacement straps for use by Royal Canadian Air Force Search and Rescue Technicians in extreme operational environments. The devices must meet stringent technical criteria including a minimum of 100 hours of continuous battery life or 260 hours in solar-assisted mode, dual-frequency GNSS with automated satellite selection, preloaded full-color topographical mapping with offline dynamic routing, a fiber-reinforced polymer chassis with titanium bezel or backplate, a sapphire lens, and an integrated variable-intensity LED flashlight offering both white and tactical lighting. The replacement straps must be 26 mm wide, constructed of chemical-resistant silicone elastomer resistant to aviation fluids, equipped with a tool-free quick-release mechanism, and feature stainless steel, titanium, or DLC-coated titanium hardware with a solid matte non-reflective finish in approved uniform colors. All items must be new production from the original manufacturer or an accredited agent, conforming to current specifications, with full traceability and manufacturer records retained for proof of origin. Each unit must be individually packaged according to Canadian Forces Packaging Specification D-LM-008-036/SF-000, accompanied by a Certificate of Compliance for airworthiness, and marked in accordance with DND standards including D2000C, D2001C, D2025C, and D6010C. Delivery is to be made FCA at the contractor’s location to 25 Canadian Forces Supply Depot in Montreal, Quebec, with all shipments subject to Incoterms 2000 and delivered duty paid including customs duties, GST/HST, and excise taxes incorporated into the quoted price. Bids must be submitted in three separately bound sections—Technical, Financial, and Certifications—with pricing appearing only in the financial section. Proposals must be received by the PWGSC Bid Receiving Unit no later than August 11, 2026, via approved channels including epost Connect, and cannot be emailed directly to contact addresses. Bidders are required to submit the Integrity Declaration Form and documentation under the Ineligibility and Suspension Policy, and must certify they are not on the Federal Contractors Program’s “FCP Limited Eligibility to Bid” list. Compliance with all mandatory technical criteria for both the devices (MTC 1-5) and straps (ST

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

CIRCUIT BREAKERS

Solicitation # W8482-264981/A

The Department of National Defence is soliciting bids for 80 circuit breakers, with 40 units required for delivery to CFB Halifax and 40 units to CFB Esquimalt, under solicitation number W8482-264981/A. Each unit must be the Siemens Energy Global GmbH & Co. KG part number 3RV2041-MA10, identified by NCAGE D1149 and GSIN 5925, with bids for equivalent or substitute products permitted provided full technical details and manufacturer information are submitted. The contract follows a Lowest Price Technically Acceptable (LPTA) methodology, where compliance with mandatory technical, packaging, marking, and preservation standards is a pass/fail requirement, and award will go to the lowest-priced compliant offer. All products must adhere to Canadian Forces packaging standards D-LM-008-001/SF-001 and marking standards D-LM-008-002/SF-001, while international contractors must meet NATO TL8100-0100 guidelines. Items must be packed on standard wooden pallets, properly labeled with UCC/EAN-128 barcodes using Application Identifiers for PSCN or NSN, and include all required human-readable data such as manufacturer name, part number, manufacture date, and expiration date. Each item must be stamped or etched with the manufacturer and part number. Deliveries are to be made DDP to the specified military bases, with payment processed electronically via direct deposit or wire transfer to designated Canadian Forces accounts. The contract requires strict adherence to defense-specific clauses covering controlled goods, anti-forced labor, international sanctions, data protection, and security clearance obligations, with the Government retaining the right to inspect goods at any point in the supply chain. Contractors must certify Canadian content eligibility and comply with all applicable procurement ethics, including the Federal Contractors Program for Employment Equity, and provide comprehensive documentation including technical and financial offers in English or French through the Government Electronic Tendering Service or CPC Connect by the deadline of August 10, 2026, at 14:00 EDT. No contract value is specified, and pricing must be submitted in separate spreadsheet and PDF formats, with the PDF deemed authoritative in case of discrepancies.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE

Fluke 5560A/2G Multi-Product Calibrators

Solicitation # W8486-270947A

The Department of National Defence, under the Government of Canada, has issued a solicitation for the procurement of Fluke 5560A/2G Multi-Product Calibrators, with a response deadline of August 12th, 2026, and a requested delivery date of January 15th, 2027. Each calibrator must be accompanied by a Certificate of Calibration dated no more than 90 days prior to delivery, ensuring recent and verified accuracy. The solicitation, identified by number W8486-270947A, was published on Buyandsell on July 29th, 2026, and will remain active for 15 calendar days. The contract is open to federal procurement, with no specific set-aside designated, and performance is anticipated to occur in Canada. Viktoria Melnichuk serves as the primary point of contact for inquiries, reachable via email and phone, and all bids must be submitted through the official tender portal before the deadline.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

DEADLINE

Solar Powered LED Strobe Lights

Solicitation # W8486-260728/A

The Department of National Defence is seeking solar-powered LED strobe lights with a red light output, specified under UNSPSC 39110000 and part number 3337-00001, with NCAGE code 0GWV8 or an equivalent alternative. The requirement is for delivery to two locations: 25 CFSD Montreal at 6363 Rue Notre Dame St E in Montreal, Quebec, and 7 CFSD Edmonton at 195 Ave & 82nd Street in Edmonton, Alberta. Each item is quoted per unit, and bidders proposing substitute or equivalent products must clearly identify the brand, model, part number, and NCAGE code of the alternative being offered. The Crown reserves the right to negotiate terms with any supplier during the procurement process. All documentation may be submitted in either English or French, Canada’s official languages. The solicitation, titled Solar Powered LED Strobe Lights, is identified by number W8486-260728/A and was posted on July 29, 2026, with a deadline for responses set for September 7, 2026, at 7:00 PM Eastern Time. The procurement is conducted under the Government of Canada’s federal procurement framework, managed by the Department of National Defence, with Robert Coffin serving as the primary contracting authority, reachable via robert.coffin@forces.gc.ca. The place of performance covers both Quebec and Alberta, excluding the National Capital Region. Bidders must ensure compliance with delivery specifications and provide full details for any proposed alternative product to be considered valid.

Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

Electrical Load Banks

Solicitation # W6369-27-X002

The Department of National Defence, through Defence Research and Development Canada, is seeking to procure Electrical Load Banks to support field trials at an Arctic site and the Over The Horizon Radar test bed at the Shirley’s Bay location in Ottawa. The requirement is part of the broader OTHR Initiative and mandates that all deliverables be ready for shipment no later than 90 days after contract award. The procurement is conducted under the Canadian Free Trade Agreement and the Canada-Korea Free Trade Agreement and is subject to a Comprehensive Land Claims Agreement. The Crown intends to award a single contract based on the highest combined rating of the Inuit Benefit Plan commitment and price, with no limitation to firms registered in the Inuit Firm Registry, and retains the right to negotiate with any supplier. There is no security clearance requirement for this procurement. Proposals must be submitted by July 31, 2026, and may be filed in either official language of Canada. The contracting authority is Scarlet Torraka Almendarez, reachable via email at scarlet.torrakaalmendarez@forces.gc.ca, and the solicitation number is W6369-27-X002. The Department reserves the right to withhold award regardless of the submissions received, and in the event of a discrepancy between the notice and the full request for proposals, the RFP takes precedence. No contract currently exists for this requirement.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE