Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

IN SCOPE CHANGE - CSS 88786- Bellefonte, PA

Awarded
W15QKN25CA069P00002Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract modification awards Drew Investment Group, LLC of Morganton, NC, additional work to replace seized 3-way chilled water control valves and their associated actuators at the Bellefonte U.S. Army Reserve Center in Pennsylvania. This change arises from findings during the execution of the original contract to upgrade the Building Automation System and chiller at the facility. The modification is managed by the U.S. Army Contracting Command - New Jersey, with the contracting office located at Joint Base McGuire-Dix-Lakehurst, and the technical oversight handled by personnel at Picatinny Arsenal, New Jersey. The action is classified as a Total Small Business Set-Aside under FAR 19.5, with the NAICS code 238220 indicating it falls under the Electrical and Other Wiring Installation Contracting category. The original solicitation number is W15QKN25CA069P00002, and the modification was posted on May 18, 2026. Primary point of contact is Jonathan Krakower, with James W. Bond III as the secondary contact, both reachable through their official Army email addresses and phone numbers provided. The place of performance remains specified as Bellefonte, Pennsylvania, with a ZIP code of 16823.

General Info

Drew Investment Group replaces seized valves and actuators at Bellefonte, PA, under Army contract W15QKN25CA069P00002.

Agency

Department Of Defense → W6QK Acc-PicaView Agency

Contract Value

$10,278.53

NAICS

238220 - Plumbing, Heating, and Air-Conditioning ContractorsView NAICS

Place of Performance

PA, 16823, USA

Set-Aside

SBA

Awardee

Drew Investment Group, LLCView Profile

Award Issued Date

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseAwarded
Posted

Award Notice

Awarded

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QK Acc-Pica
Contacts2 people available
OfficePICATINNY ARSENAL, NJ, 07806-5000, USA
Organization / Agency
Department Of Defense → W6QK Acc-Pica
View Agency Profile
Office AddressPICATINNY ARSENAL, NJ, 07806-5000, USA
Contacts
Jonathan Krakower
contact@example.gov
+1 (555) 000-0000
James W. Bond III
contact@example.gov
+1 (555) 000-0000

Full Description

Show more

Award notice for a contract modification to Drew Investment Group, LLC, located in Morganton, NC. This action provides for the replacement of seized 3-way chilled water control valves and associated actuators discovered during performance of the original contract to replace the Building Automation System and chiller at the Bellefonte U.S. Army Reserve Center, Bellefonte, PA.



Contracting Office: U.S. Army Contracting Command - New Jersey, 5418 South Scott Plaza, Joint Base McGuire-Dix-Lakehurst, NJ 08640


Similar Contracts

Same NAICS industry code

NAICS: 238220
New
SLED
ICE 8A - Ft Benning Improvements
Solicitation # 70CMSW25R00000011
Solicitation 70CMSW25R00000011 is a firm-fixed-price task order issued under an 8(a) Multiple Award Construction Contract (MACC) for design-build services to support the Immigration and Customs Enforcement (ICE) Office of Firearms and Tactical Programs at Fort Benning, Georgia. The project, valued between 4.0 million and 4.5 million dollars, focuses on life, safety, and operational improvements. The scope of work includes the installation of two aluminum awnings at the shipping and receiving dock and Fiske Range Lane 2, turf replacement at Fiske Range, the demolition of Building 2294, gutter and drainage improvements for Building 234, commercial HVAC services and replacements, and general facility improvements for Building 301 and the DAGr Team facility. The period of performance is 365 days from the date of award. Award will be based solely on the lowest total evaluated price, provided the offeror demonstrates a sound technical approach, appropriate design resources, and a comprehensive quality control and safety program. The contract is subject to the Davis-Bacon Act, requiring prevailing wage rates and specific paid sick leave for workers. Performance and payment bonds are required per FAR 52.228-15. Proposals must be submitted in two volumes: a technical and safety volume and a pricing volume using the provided template. All payment requests must be processed electronically via the Invoice Processing Platform and accompanied by certified payroll.
Bristol Alliance of Companies

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 238220
New
SLED
PIDC Project 3 - Dorm RTU Replacement and SCADA
Solicitation # 872287
This firm-fixed-price task order, issued under an 8(a) MACC IDIQ, involves the replacement and upgrade of Rooftop HVAC Units (RTUs) for the Alpha, Bravo, Charlie, and Delta dorms, as well as a SCADA system upgrade at the Port Isabel Detention Center in Los Fresnos, Texas. The project objective is to replace corroded and obsolete equipment with high-quality, coastal weather-resistant, and durable systems that exceed commercial standards. The scope includes removing existing RTUs, replacing necessary piping, electrical, and ducting, and installing new SCADA software and two chemical feed pumps in compliance with Texas Commission of Environmental Quality standards. The estimated magnitude of the project is between 1.2 million and 1.5 million dollars, with a period of performance of 365 days from the date of award. Award will be based solely on the lowest total evaluated price, provided the offeror demonstrates a sound technical approach, appropriate design resources, and a comprehensive quality control and safety program. Key requirements include the submission of a Quality Control Plan, a safety plan, and the designation of a Project Manager with at least five years of relevant federal contracting experience. The contractor must also provide a one-year warranty for installation and craftsmanship and ensure all personnel pass required background checks for site access. Compliance with the Davis-Bacon Act and associated executive orders regarding wages and sick leave is mandatory. All payment requests must be submitted electronically via the Invoice Processing Platform and accompanied by certified payroll.
Bristol Alliance of Companies

POSTED

about 13 hours ago

DEADLINE

in 13 days
View Details
NAICS: 238220
New
RFQ7593 Smoke Detector Installation
Solicitation # RFQ7593
Management & Training Corporation (MTC) is soliciting bids for a fee-for-service subcontracting opportunity to provide smoke detector installation and fire system services at the Sierra Nevada Job Corps Center in Reno, Nevada. The scope of work requires the replacement of 43 smoke detectors across specific dormitory rooms, including 12 detectors in rooms 11, 15, and 18, 12 detectors in room 19, and 19 detectors in rooms 20 and 21. The contractor must ensure all installed detectors communicate with the fire panel and that all work adheres to NFPA standards and local Authority Having Jurisdiction requirements. Bids must be submitted via email to Tom Williams by 3:00 PM PST on September 18, 2026. To be considered, applicants must provide a completed bid sheet, proof of insurance, and a supplier packet containing a W-9, self-certification form, and acceptance of terms and conditions. This opportunity is open to various small business set-asides, including SDB, WOSB, HUBZone, and Veteran-Owned businesses, under NAICS code 238220. Award decisions will be based on the best value as determined by MTC. The contract mandates compliance with Service Contract Labor Standards and Wage Determination No. 2015-5595 Revision 28 for labor rates in Washoe and Storey counties. Additionally, subcontractors must provide a 12-digit Unique Entity ID and certify their debarment status under FAR 52.209-6 if the subcontract exceeds 30,000 dollars. Strict adherence to government and Department of Labor guidance regarding the protection of sensitive and proprietary information is required.
Sierra Nevada Job Corps Center

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 238220
New
2026-Clearfield-Bldg E8 Welding HVAC
Solicitation # 2026- Clearfield- Welding Bldg. E8 HVAC Replacement
Management & Training Corporation is seeking fixed-price lump sum bids for a subcontracting opportunity to replace the HVAC system at Building E8 Welding within the Clearfield Job Corps Center in Clearfield, Utah. The scope of work includes the complete change-out of the existing motor, installation of wiring, conduit, disconnects, breakers, fuses, and starters, and the subsequent validation of voltage, phase, and grounding. Deliverables include startup and testing documentation, onsite training for maintenance personnel, and the provision of manufacturer O&M manuals. All work must adhere to OSHA requirements, federal, state, and local codes, and site safety procedures. Bids must be submitted via email to nelson.dar@jobcorps.org and patricia.willover@mtctrains.com by September 19, 2026, at 3:00 PM MST. To be considered for award based on overall best value, offerors must complete a physical site visit, provide a detailed bid breakout on company letterhead, and submit a bid bond guarantee. The project is a small business set-aside under NAICS 238220 and requires compliance with Davis-Bacon prevailing wage determinations for Davis County. Awardees must provide a UEI number, submit a Schedule of Values for invoicing via AIA G702/G703 forms, and provide original payment and performance bonds from a surety with at least an A- rating within five business days of an Intent to Award letter. Performance dates will be established upon the signing of a Notice to Proceed.
Management & Training Corporation

POSTED

about 13 hours ago

DEADLINE

in 8 days
View Details
NAICS: 238220
New
CBP7664 Wellness HVAC Compressor Replacement
Solicitation # CBP7664
Management & Training Corporation is seeking bids for a subcontracting opportunity to replace a failed HVAC/refrigeration compressor at the Wellness facility of the Sierra Nevada Job Corps Center in Reno, Nevada. The project is structured in five phases: preparation and environmental safety, demolition and removal, installation of an OEM-specified compressor and related components, system testing and commissioning, and final closeout. The contractor must ensure full restoration of cooling capacity and operational efficiency while adhering to EPA Section 608 regulations for refrigerant recovery. The work must be completed within 30 consecutive business days following a written Notice to Proceed. Bids will be evaluated based on overall best value, considering price, quality, and delivery schedules. For bids equal to or greater than 25,000 dollars, a bid bond of 20 percent of the base bid is required, along with performance and payment bonds from an A-rated surety company. Submission requirements include a signed bid sheet, a detailed bid breakout, and verification of a physical site visit. Contractors must comply with Davis-Bacon Act wage determinations for Washoe County and provide self-certification of their business size and socioeconomic category per FAR 52.219-8. Final payment is contingent upon the submission of a Notice of Final Completion, certified payroll reports, and two sets of operation and maintenance manuals.
Sierra Nevada Job Corps Center

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 238220
New
Replace Shower Diverters in two (2) Dorms
Solicitation # replace-shower-diverters-two-2-dorms
This project involves the removal and replacement of shower diverters in eight bathrooms across two dormitories located in Indiana. The scope of work includes replacing existing Powers brand diverters with Delta or comparable models featuring readily available parts, as well as repairing or replacing any deteriorated piping leading into the diverters. The solicitation is open to various small business categories, including SDB, WOSB, HUBZone, and SDVOSB entities under NAICS code 238220. Proposals must be submitted via email to Tammy Swallows at Atterbury Job Corps by September 14, 2026, at 3:00 PM.
Adams & Associates

POSTED

about 13 hours ago

DEADLINE

in 2 days
View Details
NAICS: 238220
New
This is a subcontracting opportunity to replace a chiller in McKinney, TX.
Solicitation # subcontracting-opportunity-replace-chiller-mckinney-tx
Serrato Corporation is seeking bids for a subcontracting opportunity to replace a failing air-cooled chiller at the North Texas Job Corps Center, specifically within Building 214/215 in McKinney, Texas. The scope of work includes the demolition and disposal of the existing chiller, the installation and startup of a new air-cooled chiller, and the integration of building automation controls using a JACE 9000 central integration point. Additionally, the contractor is responsible for installing three-way control valves at four air handling units, replacing VFDs, performing AHU cleaning and inspection, and ensuring all wiring is plenum-rated. Bids must be submitted by September 18, 2026, and quotes must remain valid for 90 days. Required submission documentation includes manufacturer equipment specifications, a Certificate of Liability Insurance naming Serrato Corporation as the holder, and Form 1413 for Davis-Bacon Act certified payroll compliance for work exceeding 2,000 dollars. Insurance requirements include a minimum of 500,000 dollars for Employers Liability and 1,000,000 dollars per occurrence for Commercial General Liability. The project is set aside for various small business categories, including SDB, WOSB, HUBZone, VOSB, and SDVOSB. Primary points of contact for this solicitation are Stacy Smith and Roy Henderson.
Serrato Corporation DBA North Texas Job Corps

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 238220
New
AAL-0880-02 HVAC and Electrical Upgrades Fairbanks
Solicitation # AAL-0880-02
Solicitation AAL-0880-02 is a presolicitation for HVAC and electrical upgrades at the Fairbanks FSS facility in Alaska, with an estimated construction magnitude between 250,000 and 500,000 dollars. The scope of work includes the replacement of the Fairbanks FSS chiller, four AC units, chilled-water piping, and all associated electrical systems. To maintain operations during construction, the contractor must provide temporary and redundant cooling and perform modifications to Panel P1 and various HVAC circuits. The project is scheduled for a proposed start date of April 15, 2027. Final deliverables include the completion of startup, testing, commissioning, and punch-list work, as well as providing FAA training and project closeout. This opportunity is set aside for small businesses, including SDB, WOSB, HUBZone, VOSB, SDVOSB, and Alaskan small businesses, under NAICS code 238220. Interested firms should contact Masanori Akers, the Parsons Subcontract Administrator, for further information.
PTSI Managed Services Inc.

POSTED

about 13 hours ago

DEADLINE

in 13 days
View Details
NAICS: 238220
New
Main Building 1 Wing 5 – Six Rooftop HVAC Unit Replacement – Glenmont Job Corps Center
Solicitation # S26-010
The Glenmont Job Corps Center is soliciting proposals from qualified, New York State licensed contractors for the replacement and installation of HVAC equipment within Main Building No. 1, Wing 5 (Education Building) in Glenmont, New York. The project involves replacing two 7.5-ton split-system units for the auditorium, one 6-ton rooftop unit for the library and computer lab, and one 12.5-ton rooftop unit for the north and east wing classrooms. Additionally, the scope includes installing four 2-ton ductless mini-split heat pump systems, removing a window air-conditioning unit, and abandoning two 5-ton rooftop units in place. Comprehensive associated work encompasses demolition, roof curbs and penetrations, ductwork, refrigerant and condensate piping, electrical work, controls, structural roof evaluations, and fire alarm and duct smoke detector installations, concluding with testing, balancing, and commissioning. This solicitation is set aside for various small business categories, including SDB, WOSB, HUBZone, and Veteran-Owned Small Businesses. The project must be completed within 210 calendar days following the written Notice to Proceed, and the facility will remain operational throughout the construction period. Key deadlines include a pre-proposal site walkthrough on September 10, 2026, with vendor questions due by September 14, 2026. Final proposals must be submitted by September 21, 2026, at 4:00 PM ET. All work must comply with applicable New York State codes, safety regulations, and environmental requirements.
Adams and Associates, Inc.

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 238220
New
Replace HVAC Systems in the following buildings on our campus –1.) 1091 – Glazing/Welding/Heavy Mechanics Bldg
Solicitation # 26-140
This project involves the replacement of a pad-mounted gas-fired packaged HVAC unit at the Glazing, Welding, and Heavy Mechanics Building (1091) in Indiana. The existing 10-ton Carrier unit, which utilizes R-22 refrigerant, will be replaced with a new 12.5 SEER packaged unit using non-R22 refrigerants such as R-410A or R-454B. The scope of work requires the reuse of existing ductwork, electrical disconnects, and thermostat wiring. Following installation, the old unit and any recovered refrigerant must be labeled and left at the maintenance building for parts and reuse. The solicitation is managed by Adams and Associates, Inc., with a response deadline of October 5, 2026. This opportunity is set aside for various small business categories, including Small Disadvantaged, Women-Owned, HUBZone, and Veteran-Owned businesses. Interested parties should contact Tammy Swallows for further information regarding this NAICS 238220 project.
Adams & Associates, Inc.

POSTED

about 13 hours ago

DEADLINE

in 23 days
View Details
NAICS: 238220
New
Replace HVAC Systems in the following buildings on our campus –1.) ABL Dormitory
Solicitation # 26-141
This subcontracting opportunity, managed by Adams & Associates, Inc. for the U.S. Department of Labor, involves the replacement of HVAC systems at the Atterbury Job Corps Center ABL Dormitory in Indiana. The project requires replacing existing R-22 Bryant condensing units and coils serving common areas and dormitory wings A, B, C, and D with new 12.5 SEER packaged units utilizing non-R22 refrigerants such as R-410A or R-454B. The contractor is expected to reuse existing electrical disconnects, ductwork, and thermostat wiring, and must label and leave all recovered refrigerant on-site. Bidders must attend a mandatory site visit on September 23, 2026, and submit a single lump sum proposal by October 5, 2026. Award will be based on best value, evaluating price (60 points), quality (20 points), past performance (10 points), and schedule (10 points). Eligible vendors must maintain an active SAM.gov registration and a Unique Entity ID, hold a valid Indiana Contractor's License, and provide proof of specific automobile and workers' compensation insurance. Compliance with EPA, OSHA, and Davis-Bacon Act wage determinations is mandatory. Final payment is subject to Net 30 terms and is contingent upon the submission of a completed SF 1413, certified payroll records, and the release of liens from all subcontractors and material suppliers.
Adams & Associates, Inc.

POSTED

about 13 hours ago

DEADLINE

in 23 days
View Details
NAICS: 238220
New
AAL-0810-01 Sitka (SIT) Flight Service Station (FSS) Fire Esc
Solicitation # AAL-0810-01
Solicitation AAL-0810-01 is a design-build construction project for the Sitka Flight Service Station in Sitka, Alaska. The scope of work involves the design and construction of an access stair platform serving the third floor of the facility. Comprehensive requirements include conducting a site survey, obtaining necessary permits, developing the final design, executing construction, performing inspections, completing the punch-list, and providing final as-built drawings. The project has an estimated construction magnitude between 250,000 and 500,000 dollars, with a proposed start date of February 1, 2027. This presolicitation is open to various small business set-asides, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone, and Veteran-Owned Small Businesses. The effort is managed by PTSI Managed Services Inc. and falls under NAICS codes 238220 and 238190. Responses were due by September 25, 2026.
PTSI Managed Services Inc.

POSTED

about 13 hours ago

DEADLINE

in 13 days
View Details

More opportunities from Department Of Defense → W6QK Acc-Pica

Same awarding agency

NAICS: 493190
Federal
Packaging, Preservation, and Marking (PP&M) ServicesThis contract involves the provision of packaging, preservation, and marking services in strict compliance with military standards, requiring that all items be prepared for shipment to Picatinny Arsenal or Foreign Military Sales destinations using MIL-STD-130 compliant UID marking, corrosion protection methods, and military-grade packaging protocols. The work encompasses full containerization to ensure safe, secure, and traceable transport of sensitive defense equipment and components throughout the logistics chain. The contract is classified as a subcontract under NAICS code 493190 and is administered by the Department of Defense through the W6QK Acc-Pica office. It was posted on June 25, 2026, and requires full adherence to U.S. military logistical and identification standards without exceptions, emphasizing durability, traceability, and environmental protection during storage and transit. All deliverables must meet stringent defense logistics requirements to support operational readiness and international defense partnerships.
Other Warehousing and Storage

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 541380
Federal
Weapon System Testing and Quality Assurance (QA) ServicesThe contract pertains to comprehensive independent testing and quality assurance services for a weapon system, encompassing First Article Inspection, live-fire endurance evaluations, accuracy and dispersion measurements, environmental resistance testing, and full compliance verification against military standards. These activities are critical to ensuring the system meets rigorous performance, durability, and reliability requirements before field deployment. The work is structured as a subcontract under the Department of Defense, with the contracting office identified as W6QK Acc-Pica, and the North American Industry Classification System code 541380 indicates specialized engineering and technical services. Performance location details are unspecified, and no set-aside provisions or small business preferences are indicated, suggesting the opportunity is open to qualifying firms regardless of size or affiliation. The solicitation was posted in June 2026, and all testing must align precisely with defined military protocols to validate functional integrity under operational conditions.
Testing Laboratories and Services

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 332212
Federal
Barrel Forging and Rifling ServicesThe contract involves the manufacturing and processing of M240B machine gun barrels to exact military specifications, encompassing forging, rifling, chambering, and stress-relieving operations to ensure superior accuracy, heat resistance, and durability under sustained fire conditions. All work must meet stringent defense standards for performance and reliability, with the finished barrels intended for military use in high-demand operational environments. The service is classified as a subcontract under NAICS code 332212, linked to the Department of Defense and administered by W6QK Acc-Pica. The solicitation was posted in June 2026, with no set-aside provisions specified. While specific performance location and point of contact details are not provided, the work is expected to be carried out by a qualified industrial partner capable of delivering precision-engineered barrels consistent with military-grade requirements for longevity and combat readiness.
Hand and Edge Tool Manufacturing

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 332721
Federal
Precision Machined Fire Control Group ComponentsThe contract entails the precision manufacturing of critical fire control components including trigger housing, sear, hammer, and disconnector, produced through advanced CNC machining, controlled heat treatment, and specialized surface finishing to ensure adherence to stringent military durability and reliability standards. These components must meet exacting tolerances and performance benchmarks required for high-stress operational environments, with process controls in place to guarantee consistency and traceability across production batches. The work is classified as a subcontract under NAICS code 332721, issued by the Department of Defense through the W6QK Acc-Pica office, with the opportunity posted in June 2026. While the place of performance and point of contact details are unspecified, the nature of the project implies a requirement for certified manufacturing facilities capable of handling defense-grade materials and complying with federal quality and security protocols. Production must align with the rigorous expectations of military-grade equipment, ensuring functionality under extreme conditions without compromise.
Precision Turned Product Manufacturing

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 332999
Federal
M240B Machine Gun Final Assembly and IntegrationThe contract entails the final assembly, integration, and configuration of M240B machine guns strictly in accordance with U.S. military specifications and the FN Herstal Technical Data Package. This work includes comprehensive quality assurance protocols, mandatory test firing to verify functionality and reliability, and full compliance with First Article Inspection requirements to ensure all components meet rigorous performance and dimensional standards. All processes must be executed with precision to guarantee operational readiness and consistency with authorized military hardware. The subcontract is classified under NAICS code 332999 and is issued under the Department of Defense through the W6QK Acc-Pica office. The work will be performed in accordance with federal defense contracting requirements, though specific performance location and contact details are not provided. The solicitation was posted on June 25, 2026, and remains active for qualified subcontractors seeking to support defense manufacturing efforts. Participation requires demonstrated capability in small arms final assembly, adherence to technical data packages, and established quality control systems verified through military inspection processes.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 541715
Federal
Rapid Response and Prototyping Process Development
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

3 months ago

DEADLINE

in over 4 years
View Details
NAICS: 541611
Federal
Operational Environment Evaluation & Requirements Analysis
Administrative Management and General Management Consulting Services

POSTED

3 months ago

DEADLINE

in over 4 years
View Details
NAICS: 541330
Federal
Technology Utilization and Integration Support
Engineering Services

POSTED

3 months ago

DEADLINE

in over 4 years
View Details
NAICS: 541715
Federal
Advanced and Innovative Technology Review Services
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

3 months ago

DEADLINE

in over 4 years
View Details
NAICS: 541715
Federal
BAA DEVCOM AC Emerging Technologies
Solicitation # W15QKN-26-S-1AZR
The U.S. Army Combat Capabilities Development Command Armaments Center (DEVCOM AC) has issued Broad Agency Announcement W15QKN-26-S-1AZR to solicit research proposals and white papers for innovative technologies in emerging weapons, munitions systems, and soldier lethality. This continuously open announcement is effective from March 5, 2026, through March 4, 2031, and seeks collaborations with industry and academia to advance the state of the art through scientific study and experimentation. The scope of work encompasses a combination of basic research, advanced development, and acquisition, with a focus on technology utilization, rapid prototyping, and operational environment evaluation. Proposals are evaluated based on scientific merit and military relevance, utilizing a process that includes an initial pass/fail gate followed by peer review from qualified scientists. While the BAA is issued under FAR 6.102(d)(2) for competitive selection, some instruments may be executed as Other Transactions for Prototype Projects, which are not subject to standard FAR procurement regulations. Awards may cover a period of performance up to three years, typically consisting of one basic year with two one-year options. Interested parties are encouraged to contact the Technical Point of Contact before submitting white papers, which must be unclassified and include biographical sketches of key personnel. Final funding decisions are subject to funds availability and require registration in the System for Award Management.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

3 months ago

DEADLINE

in over 4 years
View Details
NAICS: 541511
Federal
Software Integration and Interoperability ServicesThe contract awards services to maintain and enhance associative interfaces between ABAQUS and leading third-party CAD tools including Pro/ENGINEER, CATIA, and Wave6, ensuring seamless data exchange and workflow integration for engineering simulation users. The work focuses on sustaining existing interoperability capabilities while advancing functionality to support evolving software versions and user requirements, with an emphasis on reliability, performance, and user experience across multi-platform environments. This effort supports defense-related engineering workflows by bridging design and analysis ecosystems critical to product development and simulation fidelity. The contract is classified as a subcontract under NAICS code 541511 for custom computer programming services, issued by the Department of Defense through its W6QK Acc-Pica agency, with performance required in Waltham, Massachusetts, 02451. Although details such as solicitation numbers and point of contact are not provided, the posting date of May 14, 2026 indicates the agreement is anticipated to commence following a future competitive process. The scope demands deep technical expertise in CAE software architecture, API development, and cross-platform integration to ensure continued compatibility and functionality between industry-standard design tools and ABAQUS simulation solutions.
Custom Computer Programming Services

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 541330
Federal
Custom Engineering Analysis SupportThe contract titled Custom Engineering Analysis Support provides on-demand engineering expertise to support DEVCOM-AC teams with complex simulations, model validation, and advanced use cases requiring specialized technical assistance. This subcontract is issued under NAICS code 541330 for scientific and technical consulting services and is administered by W6QK Acc-Pica under the Department of Defense. The work is performance-based at a designated location in Waltham, Massachusetts with a ZIP code of 02451. Services are mobilized as needed to address urgent or intricate technical challenges that exceed standard capabilities, ensuring timely and precise engineering solutions for defense-related modeling and simulation efforts. The contract does not specify a solicitation number or set-aside type, indicating it is likely an unfunded or task-order-based arrangement within an existing overarching agreement.
Engineering Services

POSTED

4 months ago

DEADLINE

N/A
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS