Top

KC-135 Surge Suppressor Repair and Overhaul

Active

Federal

Response Deadline07/30/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → FA8119 Afsc PzabcView Agency

NAICS

336412 - Aircraft Engine and Engine Parts ManufacturingView NAICS

Place of Performance

S Coffeyville, OK, 73145, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 16

subcontract

Response DeadlineJul 30

Submission deadline

Response Deadline

07/30/2026, 05:00:00 PM UTCin 4 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyDepartment Of Defense → FA8119 Afsc Pzabc

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA8119 Afsc Pzabc

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Complete repair, overhaul, and testing of KC-135 Surge Suppressor units to restore to serviceable condition using OEM data and configuration control.

Similar Contracts

Same NAICS industry code

NAICS: 336412

New

DIBBS

SHROUD SEGMENT, TURBThe contract solicits the procurement of eleven Shroud Segments for Turbine applications under NSN 2840-01-689-4848, issued by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation, identified by number SPE4A5-26-T-309M, was posted on July 26, 2026, with a response deadline of August 3, 2026, indicating a structured federal procurement timeline. The item is classified under a federal procurement type with no specific set-aside designations, and performance of the contract is expected to occur within the United States. The solicitation is accessible through the DIBBS platform, and no point of contact details are provided within the posted data, suggesting that inquiries must follow standard federal contracting channels.

Defense Logistics Agency

POSTED

DEADLINE

DUCT,COMPRESSOR,AIR_TF33_2840008003983RV_444561The U.S. Air Force, through the 421st SCMS Requirements Office at Tinker Air Force Base, is conducting market research to identify qualified sources for the new manufacture of the compressor duct assembly with part number 444561 and NSN 2840-00-800-3983RV, intended for use on TF33 engines. This is a Sources Sought notice under FAR Part 10, not a solicitation, and no contract award is anticipated based on this effort. The government seeks information from potential suppliers capable of producing the item from scratch, including component procurement, inspection, testing, preservation, packaging, shipping, and management of supply chain risks such as diminishing manufacturing sources and long-lead parts. The estimated requirement is 57 units, and potential sources may also bear nonrecurring engineering costs to qualify as an approved vendor. The procurement falls under NAICS code 336412 with a size standard of 1,500 employees and is open to all business sizes, with specific interest in small businesses, 8(a) firms, service-disabled veteran-owned businesses, HUBZone businesses, and women-owned small businesses. The response deadline is August 25, 2026, and interested parties must select the “Add Me to Interested Vendors” button to be considered. No funds are available for this market research phase, and responses are strictly for acquisition planning purposes. The point of contact for submissions is the 421st SCMS Workflow Email, and performance will occur at Tinker AFB, Oklahoma. The government may opt to break the requirement into separate awards by airframe but has not yet determined the final acquisition strategy.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

COTS Fluid Prep Parts Kit SupplyThe contract involves the supply of a pre-assembled commercial off-the-shelf fluid preparation parts kit, identified by part number KIT1097 and national stock number 4330016534316, specifically for use in aerospace or defense fluid system maintenance operations. The kit is intended for delivery to DLA San Joaquin, with the place of performance located in Tracy, California, at zip code 95304-5000. The solicitation is categorized as a subcontract under NAICS code 336412, which corresponds to aircraft and missile components and accessories manufacturing, indicating the technical nature and defense-oriented application of the product. The opportunity was posted on July 24, 2026, with a response deadline set for July 29, 2026, and is procured through the Maritime Supply Chain under the Department of Defense, reflecting its alignment with federal defense logistics requirements. No set-aside provisions are specified, and all responses must be submitted via the DIBBS platform through the provided UI link.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Chip Detector Manufacturing and SupplyThe contract calls for the manufacture and delivery of 60 precision chip detectors, identified by NSN 2995-00-946-9859 and Part Number A7013W, specifically engineered for use in defense aerospace systems where mission-critical reliability is non-negotiable. Each unit must meet stringent zero-defect quality protocols and maintain complete lot and serial traceability from raw materials through final assembly and shipment, ensuring compliance with defense-grade documentation standards. The product is to be delivered FOB origin, meaning the supplier assumes all responsibility and risk until the item is loaded at the designated shipping point, with no additional transportation or handling obligations imposed post-shipment. This subcontract, classified under NAICS code 336412 for Aerospace Product and Parts Manufacturing, is issued by the Department of Defense through the LAND SUPPLY CHAIN organization. The place of performance is specified as Dulles, Virginia, with a tight response window closing on July 29, 2026, following a posting date of July 24, 2026. The acquisition is not subject to any set-aside designation, indicating open eligibility to all qualified contractors. Delivery must align with exacting defense specifications, requiring rigorous quality control processes, certified testing records, and adherence to federal supply chain integrity mandates to ensure operational readiness in high-stakes environments.

POSTED

DEADLINE

Nonmetallic Hose Supply (Bulk)The contract seeks the procurement and delivery of 1-inch diameter nonmetallic hose in bulk lengths, strictly adhering to Department of Defense technical standards set by the Fluid Handling Division. The supplier must ensure the product meets all specified quality, performance, and material requirements without exception. Packaging and labeling must comply with federal and defense guidelines to support proper handling, tracking, and inventory management throughout the supply chain. Delivery is to be made FOB origin, meaning the buyer assumes responsibility for transportation and associated costs once the goods leave the supplier’s facility. The hose is intended for use in military applications and must be free of metallic components to ensure compatibility in sensitive environments. The solicitation is open as a subcontract under NAICS code 336412 with a response deadline of July 29, 2026, and was posted on July 24, 2026. The place of performance is designated as Barstow, California, with a ZIP code of 92311-0000, indicating the delivery point or operational area where the hose will be utilized. While the solicitation number and point of contact details are not provided in the data, the contract is accessible via the DIBBS platform for qualified contractors to review full technical specifications and submit bids. The lack of set-aside classification suggests this opportunity is open to all eligible vendors without preference given to small, minority, or other designated business categories.

FLUID HANDLING DIVISION

POSTED

DEADLINE

HOSE, NONMETALLICThe contract specifies the procurement of a nonmetallic hose with a unit of issue of one foot, identified by NSN 4720-01-210-2726 and part number 2794HX, supplied by OSHKOSH DEFENSE LLC and CLARK EQUIPMENT CO. The requirement calls for delivery of exactly one foot under CLIN 0001 with a delivery window of ten days FOB origin, no negative quantity variance allowed, and inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and strict DLA standards including MIL-STD-129 marking and labeling, with palletization aligned to RP001 DLA Packaging Requirements. All technical and quality specifications referenced via R or I numbers from the DLA Master List take precedence over any other standard. The hose must be shipped in bulk, with no parcel post permitted, via the fastest traceable means to the designated warehouse at MCLB Yermo Annex in Barstow, California, under shipment RDD 555 and project code TP 2. The original required delivery date is April 3, 2025, and the contract is issued under solicitation SPE7M4-26-T-257D with compliance governed by the DLA Master List revision effective on the solicitation issue date.

FLUID HANDLING DIVISION

POSTED

DEADLINE

CHIP DETECTORThe contract pertains to the procurement of a CHIP DETECTOR, identified by part number A7013W and NSN 2995-00-946-9859, with a quantity of 60 units to be delivered within 20 days of contract award. The item is classified as a critical application and must comply with stringent quality and inspection standards, including MIL-STD-1916 or ASQ H1331 for sampling, with zero non-conformances required unless otherwise specified. All packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific packaging codes and methods detailed, including palletization requirements as outlined in DLA’s packaging directives. The delivery is FOB origin, with inspection and acceptance occurring at the point of origin, and no variance in quantity is permitted. The contractor, Eaton Aerospace Engineered Sensors/TEDECO, is subject to tailored higher-level quality requirements for both manufacturers and non-manufacturers, and must comply with cybersecurity requirements under CMMC Level 2 self-assessment. The item is destined for the German Armed Forces Command USA-CAN at Dulles, Virginia, with special instructions for marking, documentation, and delivery logistics. Additionally, the contract incorporates technical and quality requirements from the DLA Master List and specifies the use of authorized DoD units of issue. The solicitation was issued on July 24, 2026, with responses due by July 29, 2026, under solicitation number SPE7L1-26-T-830C, and is classified under NAICS code 336412 for defense aviation and aerospace component manufacturing.

POSTED

DEADLINE

Supply of Detachable DCM Units (OEM or Authorized Distributor)The contract requires the supply of new, traceable Detachable DCM units with NSN 1560-01-HS1-9758 and part number 501-1803-179 specifically for MH-60T aircraft. All units must be sourced from the original equipment manufacturer or an authorized distributor to ensure compliance with quality and authenticity standards. Deliveries are to be made F.O.B. Destination to Elizabeth City, North Carolina, with full responsibility for transportation logistics and timely arrival resting with the supplier. The contract is classified as a subcontract under NAICS code 336412, indicating it falls within the aerospace product and parts manufacturing sector, and is managed by the Aviation Logistics Center under the Department of Homeland Security. The solicitation was posted on July 24, 2026, with a firm response deadline of August 7, 2026, at 6:00 p.m. Eastern Time. No set-aside type has been designated, meaning the opportunity is open to all qualified vendors without preference for small businesses or other categories. The place of performance is fixed in Elizabeth City, NC, and all equipment must meet stringent traceability requirements to ensure accountability throughout the supply chain. Bidders must be prepared to demonstrate full compliance with technical specifications, documentation, and delivery timelines to meet operational readiness requirements for the MH-60T fleet.

Aviation Logistics Center (ALC)(00038)

POSTED

DEADLINE

Aviation Parts Supply (Crew Harness Assembly and Related Components)The contract entails the supply of new aviation parts, specifically crew harness assemblies and related components, sourced exclusively from original equipment manufacturers or their approved suppliers, with full traceability and airworthiness certification required for all items. Delivery must be made F.O.B. Destination to the U.S. Coast Guard Aviation Logistics Center in Elizabeth City, North Carolina, ensuring that all parts meet stringent quality and compliance standards for operational use. The solicitation is classified as a subcontract under NAICS code 336412, and it is managed by the Department of Homeland Security through the Aviation Logistics Center. Responses are due by July 30, 2026, at 1:00 PM, with the opportunity posted on July 24, 2026, providing a six-day window for submissions. All awarded parts must conform to certified documentation requirements to guarantee regulatory approval and operational safety in federal aviation environments.

Aviation Logistics Center (ALC)(00038)

POSTED

DEADLINE

TF33 Repair 1st-4th Stage Turbine Nozzle VanesThe contract seeks repair services for the 1st through 4th stage turbine nozzle vanes on TF33 engines, targeting specialized maintenance to restore operational readiness and performance. This presolicitation is designated as a Partial Small Business Set-Aside under FAR 19.5, reserving a portion of the award for small business concerns, and falls under NAICS code 336412 which covers aircraft engine and engine parts manufacturing. The solicitation is managed by the Department of Defense through the FA8121 AFSC PZAAA office located at Tinker Air Force Base in Oklahoma City, Oklahoma. While the detailed place of performance is unspecified, the work is expected to be conducted in support of military aviation infrastructure under the oversight of the Air Force Sustainment Center. Brody Corbett serves as the primary point of contact for inquiries, with direct access provided via phone and email for potential bidders seeking clarification or additional information prior to submission.

POSTED

DEADLINE

Spares Procurement of Lever, Remote Control. NSN: 3040-01-267-7734NZThe contract solicitation seeks spares procurement for a lever and remote control with NSN 3040-01-267-7734NZ, issued under solicitation number FD20302602308 by the Department of Defense through the Air Force Sustainment Center office located at Tinker AFB, Oklahoma. The posting date is July 24, 2026, with a response deadline of August 10, 2026, at 8:00 PM Eastern Time, and it is classified as a sources-sought notice indicating the government is gathering market information to determine potential supplier capabilities rather than issuing a formal procurement. The North American Industry Classification System code is 336412, which corresponds to aerospace product and parts manufacturing, suggesting the requirement is for specialized defense-related components. The primary point of contact is John Freeman, reachable via email at John.Freeman.16@us.af.mil, and the place of performance is not explicitly defined beyond the issuing agency's location. No set-aside provisions are specified, meaning the opportunity is open to all eligible contractors regardless of size or certification status.

POSTED

DEADLINE

F108 Compressor Inlet Temperature (CIT) SensorThe United States Air Force, through the Air Force Sustainment Center at Tinker Air Force Base, is seeking contractors to repair F108 Compressor Inlet Temperature (CIT) Sensors, NSN 2915-01-139-6618PN, with part numbers 8901-180 and 9178M37P02. The repair work includes disassembly, cleaning, inspection, maintenance, reassembly, testing, and finishing to restore the sensors to serviceable condition, with all labor, materials, equipment, and facilities to be provided by the contractor. The contract will be structured as a Firm Fixed Price, Indefinite Delivery Requirements type with a one-year base period and four optional one-year extensions. The sensors are classified as a service under the Service Contract Labor Standards statute, and the work is governed by a requirement for a quality system compliant with ISO 9001:2000, verified through certification or a DCMA QMS audit. A total of 150 units are required annually, delivered at a rate of 12 units every 30 days, with shipments directed to the DLA Distribution Depot at Tinker AFB. UID marking is mandatory for all delivered items. The solicitation, identified as FA812226RB001, is open to all responsible sources, though qualification is required and must be completed prior to award, with no delays permitted for additional source approval. Current approved sources include Woodward, Inc. with CAGE code 66503. Line Item 0002 allows for over-and-above work to be negotiated separately, while Line Item 0003 covers data requirements per the Contract Data Requirements List without separate pricing. The acquisition follows FAR Part 12, treating the service as a commercial item, and utilizes electronic procedures for submission. A designated Ombudsman is available to receive and relay concerns from offerors during the proposal process, ensuring confidentiality without influencing evaluation or selection. Proposals are due by August 24, 2026, and the contract will be awarded based on compliance with technical, quality, and qualification criteria.

POSTED

DEADLINE

More opportunities from Department Of Defense → FA8119 Afsc Pzabc

Same awarding agency

NAICS: 541611

Federal

Continuity of Operations (COOP) and Mission Essential Services Planning

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Surge Production and Capacity Planning Support

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Supply Chain Risk Management and Cybersecurity Compliance Support

Computer Systems Design Services

POSTED

DEADLINE

The attached Sources Sought Synopsis is to support the repair of the KC_135_Surge_SuppressorThe U.S. Air Force, under the Department of Defense and managed by the FA8119 Afsc Pzabc office located at Tinker AFB, Oklahoma, is seeking sources to support the repair of the KC-135 Surge Suppressor. This procurement is identified by solicitation number KC_135_Surge_Suppressor_2 and falls under NAICS code 336413, which corresponds to aircraft manufacturing. The opportunity is posted as a sources sought synopsis with no set-aside designated, indicating it is open to all eligible businesses. Interested parties must submit responses by the deadline of July 30, 2026, at 5:00 PM Eastern Time. The primary point of contact is Mya Szymanski, with secondary support provided by Paula Perry, both reachable via U.S. Air Force email addresses. The work is expected to be performed at S Coffeyville, Oklahoma, with the same ZIP code as the office address, suggesting localized operations or logistical alignment. The official platform for viewing and responding to this solicitation is linked through SAM.gov.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Repair of B-2 Transponder Set NSN: 5895-01-383-4052 FW P/N: 159000-7The United States Air Force, through the Air Force Sustainment Center at Tinker Air Force Base, is issuing a firm-fixed-price indefinite-delivery, requirements contract for the repair of the B-2 Transponder Set, National Stock Number 5895-01-383-4052FW, part number 159000-7, manufactured by Northrop Grumman. The contract will have a three-year basic period with a one-time two-year option and a six-month extension option, with performance beginning on the date of award and concluding upon government acceptance of services. The procurement is restricted to a single source, Associated Aircraft Manufacturing and Sales, Inc. (CAGE 56540), under FAR 6.302-1 due to the unique expertise, proprietary test equipment, firmware, software, and certified personnel required to perform the repair, which no other contractor possesses. All work must be performed at the contractor’s facility, and delivery of repaired units is required FOB origin to the designated DoDAAC SW3211 at Tinker AFB, Oklahoma. The contract includes multiple line items: Line Item 0001 covers the repair of the transponder set with a best estimated quantity of six units during the basic period and four during option one, with two in the extension; Line Items 0002 through 0006 are non-recurring support functions including over and above work, data and reports, surge capacity, material lay-in, and repair management, each with a base quantity of one per period. The contract incorporates a comprehensive performance work statement detailing disassembly, cleaning, inspection, reassembly, ATP troubleshooting, and finishing actions, along with mandatory component replacement at the contractor’s expense for parts failing due to catastrophic, fatigue, or normal deterioration. Quality standards require compliance with ISO 9001-2015 and AS9100, and the contractor must adhere to MIL-STD-2073-1E for packaging and MIL-STD-130N for Unique Identification (IUID) marking, which is required only on the end item unless otherwise specified by engineering documentation. Technical data will not be provided by the government due to ownership restrictions. Payment will be processed electronically through WAWF using Secure File Transfer Protocol, Electronic Data Interchange, or web input, and the contractor must maintain a capable property management system per DFARS clauses 252.245

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

KC-135 Multipoint Refueling System RepairThis contract is a sole source, firm fixed price indefinite delivery/requirements contract for the repair of the KC-135 Multipoint Refueling System, issued by the Department of Defense’s FA8119 Afsc Pzabc office located at Tinker AFB, Oklahoma. The solicitation, numbered FA8119-26-R-0015, was posted on June 18, 2026, with a response deadline of August 18, 2026, and is categorized under NAICS code 336413 with no set-aside restrictions. The contract has a five-year performance period consisting of a one-year base period and four priced one-year options, with work to be performed primarily at the A SW3211 DLA Distribution Depot in Coffeyville, Oklahoma. The scope includes overhaul and repair of critical components such as control valves, winding handle assemblies, and material lay-in, along with labor services provided by a contract field team and remote engineering support. Deliverables must meet higher-level contract quality requirements using materials like aluminum alloy and steel, and all work is subject to inspection and acceptance at origin. Payment requests must be submitted electronically through Wide Area WorkFlow using specified formats, with payment processed under DoDAAC HQ339, and shipping terms are F.O.B. Origin. The contractor is required to comply with a comprehensive set of Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement clauses covering termination for convenience, default, government property, purchasing system administration, sustainable products, prohibition of fluorinated fire-fighting agents, and cybersecurity standards including NIST SP 800-171. Offerors must maintain current representations and certifications in SAM, including business size status, Buy American compliance, foreign ownership disclosures, and anti-trafficking policies, and must provide certified and uncategorized cost data with formulas and forward pricing rates. All pricing must be in U.S. dollars with uniform profit percentages applied only to allowable and allocable costs, and several line items remain to be negotiated. Access to sensitive unclassified information is expected, and the contractor must adhere to all applicable ethical, trade, and security requirements outlined in the contract.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Fuel Access Door Assembly – RepairThe contract pertains to the repair of fuel access door assemblies identified by NSN 1560-99-087-4720 FL, encompassing a full range of maintenance activities including structural inspection, replacement of damaged or worn components, resealing to ensure integrity, and comprehensive functional testing to verify performance. The work must adhere to strict technical standards to ensure operational safety and reliability, with all repairs conducted in accordance with applicable military and aviation specifications. The repair effort is critical to maintaining aircraft readiness and supporting mission-critical operations within the Department of Defense. The procurement is structured as a subcontract under the NAICS code 811310, which classifies it under aircraft repair and maintenance services. It was posted on June 18, 2026, with a firm deadline for responses set for August 18, 2026, at 8:00 PM. The place of performance is specified as Coffeyville, Kansas, with a ZIP code of 73145, indicating the physical location where the repairs must be executed. The contracting activity is managed by FA8119 Afsc Pzabc under the Department of Defense, and while no specific point of contact or set-aside provisions are detailed, the requirement is open to qualified subcontractors capable of meeting technical, logistical, and compliance obligations.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Flight Refueling Pod – Teardown, Test, and EvaluationThe contract requires comprehensive teardown, inspection, testing, and evaluation of flight refueling pods to assess their current condition and determine whether they are repairable or require replacement. This work involves detailed disassembly of the pods followed by rigorous diagnostic procedures to identify wear, damage, or component failure, ensuring all findings are thoroughly documented and analyzed to support maintenance and logistics decisions. The evaluation must be conducted to established technical standards to ensure airworthiness and operational readiness. Performance is to be completed at the designated location in Coffeyville, Kansas, with a response deadline of August 18, 2026. The contract is classified as a subcontract under the NAICS code 811212, which pertains to machinery and equipment repair and maintenance. It is managed by the Department of Defense through the FA8119 Afsc Pzabc office, indicating the work supports military aviation infrastructure. All activities must align with defense requirements, and contractors are expected to deliver precise results that enable informed decisions regarding fleet sustainment and resource allocation.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Control Valve Overhaul and TestingThe contract pertains to the overhaul and testing of control valves with the national stock number 4810-99-754-3435, encompassing full disassembly, detailed inspection, necessary repairs, reassembly, and comprehensive functionality testing to ensure operational readiness. All work must adhere to strict technical standards and performance criteria to guarantee the valves meet required specifications after overhaul. The task is classified as a subcontract under NAICS code 332912 and is being managed by the Department of Defense through the agency FA8119 Afsc Pzabc, with performance required at a designated location in Coffeyville, Oklahoma, zip code 73145. Interested parties must submit their responses no later than August 18, 2026, at 8:00 PM Eastern Time, with the opportunity posted on June 18, 2026, and accessible via the SAM.gov portal for further details and submission.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

DEADLINE

Contract Field Team – Remote Engineering SupportThe contract titled Contract Field Team – Remote Engineering Support is a subcontract under the Department of Defense, managed by FA8119 Afsc Pzabc, aimed at providing remote engineering services including troubleshooting, technical analysis, and advisory support for systems governed by the agreement. Work is to be performed remotely with the official place of performance listed as S Coffeyville, 73145, though the nature of the services allows for execution from any location. Services are categorized under NAICS code 541330, which corresponds to engineering services, indicating a focus on specialized technical expertise rather than physical on-site presence. The solicitation was posted on June 18, 2026, with a response deadline set for August 18, 2026, at 8:00 PM Eastern Time, giving interested parties approximately two months to submit proposals. No set-aside type is designated, meaning the contract is open to all eligible contractors without preference for small businesses or other categories. There is no designated point of contact provided in the details, and the full terms and conditions must be reviewed via the official SAM.gov link for additional submission requirements and performance expectations.

POSTED

DEADLINE

Winding Handle Component Replacement and Re-Greasing ServiceThe contract mandates the replacement of components within winding handle assemblies, the application of re-grease to all relevant mechanical parts, and the execution of thorough functionality testing to verify operational integrity. All work must ensure that the assembled units meet required performance standards after service, with attention to precision, reliability, and longevity of the repaired mechanisms. The task is scoped to address maintenance needs for specialized equipment, requiring skilled personnel familiar with mechanical systems and assembly protocols. This subcontract is issued under the NAICS code 332999 for other fabricated metal product manufacturing and will be performed at a designated location in Coffeyville, Oklahoma, with a zip code of 73145. The opportunity was posted on June 18, 2026, and all responses must be submitted by August 18, 2026, at 8:00 PM. It is managed by the Department of Defense through the office FA8119 Afsc Pzabc, and while no set-aside type is specified, interested parties must fulfill all technical and procedural requirements outlined in the solicitation to be considered for award.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

KC-135 Multipoint Refueling System RepairThe United States Air Force, through the Air Force Sustainment Center at Tinker AFB, is seeking to contract for the repair, overhaul, and technical evaluation of components of the KC-135 Multipoint Refueling System under a firm fixed price requirements-type contract. The work encompasses a wide range of parts including fuel door assemblies, hose drum assemblies, aircraft pylons, torque drum units, gull-wing door assemblies, fairing assemblies, vane pump assemblies, drive units, control units, valves, flowmeters, motors, generators, and the flight refueling pod itself, with specific actions designated as test and technical evaluation, repair, in-storage maintenance, overhaul, or no fault found evaluations. All components are tied to specific NSNs and part numbers, and the work must be performed in accordance with engineering source approval standards maintained by the design control activity, with acquisition restricted to approved sources due to unique design and manufacturing capabilities. The contract will be performed at S Coffeyville, Oklahoma, with shipping instructions to be provided by the Production Management Specialist prior to any shipment of serviceable assets. The contract period spans a basic year with four one-year options, and the Government intends to issue the solicitation on or about June 10, 2026, with responses due by August 10, 2026, and an estimated award date of August 3, 2027. This is a sole source requirement directed to Cobham Mission Systems, identified by CAGE code U1918, although all responsible sources may submit capability statements for consideration under the sole source authority specified in RFO 5.101(c)(vi). Offerors must comply with data reporting requirements under Commercial Asset Visibility Air Force (CAV AF) and Contract Data Requirements List (CDRLs) DD FORM 1423, and must state their business size category, socioeconomic status, and ownership as U.S. or foreign-owned. Engineering source approval is mandatory and cannot be delayed pending qualification of other sources. The procurement will follow FAR Part 15 contracting by negotiation procedures, and electronic submission is required. An Ombudsman is available to address concerns during proposal development, and all inquiries must be submitted in writing via email. Contractor field teams, travel, engineering support, repair management, and over-and-above activities are included as separate line items alongside direct part repair and overhaul tasks.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

2 months ago

DEADLINE

in 15 days

View Details