Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Logistics and International Delivery Services

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the end-to-end logistics for the international transport, customs clearance, and final-mile delivery of mobile laboratories from Germany to Kampala, with full responsibility for crating, handling, and secure transit throughout the journey. This subcontract requires specialized expertise in handling sensitive medical and scientific equipment, ensuring all phases—from packaging and export documentation to import compliance and on-site delivery—are executed without disruption or damage. The work must adhere to international shipping standards and local regulatory requirements in both Germany and Uganda, with particular attention to customs procedures in Kampala to avoid delays or penalties. The opportunity is posted under NAICS code 488190 for other support activities for air transportation and is managed by the Department of State through Acquisitions - Rpso Frankfurt, with a response deadline of August 15, 2026. Performance is strictly localized to Kampala as the final destination, requiring the contractor to coordinate with local agencies and transport providers for last-mile logistics. The scope demands proven experience in the shipment of high-value, fragile laboratory equipment across multiple jurisdictions, with robust contingency planning for weather, political, or infrastructural challenges that may affect delivery timelines or integrity of the cargo.

General Info

End-to-end logistics for mobile labs from Germany to Kampala, including customs, crating, and secure final-mile delivery of sensitive equipment.

Agency

Department Of State → Acquisitions - Rpso FrankfurtView Agency

NAICS

488190 - Other Support Activities for Air TransportationView NAICS

Place of Performance

Kampla, UG-102, UGA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of State → Acquisitions - Rpso Frankfurt
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of State → Acquisitions - Rpso Frankfurt
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
International shipping, customs clearance, and final-mile delivery of mobile labs from Germany to Kampala, including crating and handling.

Similar Contracts

Same NAICS industry code

NAICS: 488190
New
DIBBS
LEVER, BREECHBLOCK, COCK
Solicitation # SPE7L4-26-T-5985
The contract involves the procurement of 17 units of a lever, breechblock, cocking component designated by NSN 1005-13-116-2146 under solicitation SPE7L4-26-T-5985, with a delivery deadline of 145 days after contract award. This item is classified as a defense article subject to the International Traffic in Arms Regulations and the Arms Export Control Act, requiring all manufacturers and exporters to be registered with the Directorate of Defense Trade Controls; failure to provide proof of registration renders any offer ineligible. The technical data associated with this component is export-controlled under either ITAR or EAR, with strict limitations on dissemination to foreign persons or entities, even within the United States. Only contractors with approved U.S./Canada Joint Certification Program status, completion of mandatory DOD export control training, and explicit DLA authorization may access the technical data. Additionally, the item falls under demilitarization requirements for Category I munitions, and the use of Class I ozone-depleting chemicals is strictly prohibited. Packaging must comply with DLA procurement standards, and government identification must be removed from any non-accepted supplies. The solicitation was issued on August 4, 2026, with responses due by August 17, 2026, and performance is designated for Cherry Point, North Carolina, under the oversight of the Department of Defense’s Combat Vehicles and Armament division.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 488190
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-12PD
This contract pertains to the procurement of PIN-RIVET items identified by NSN 5320-01-623-5442 and part number HLT50YB-12-18 or ST3M759C6-18, with a total quantity of 23 units at a unit price of $23.00, resulting in a total contract value of $529.00. The items must be manufactured or sourced from approved vendors including SPS Technologies LLC, Huck International Inc, West Coast Aerospace Inc, Hi-Shear Corporation, Heartland Precision Fasteners Inc, Fastener Innovation Technology Inc, and The Boeing Company, all of which are listed with their respective DOD vendor identifiers. Manufacturing may require casting or forging processes, and if the contractor lacks the necessary tooling or technical expertise, they must submit a Casting and Forging Assistance Request to the Defense Logistics Agency. Compliance with MIL-STD-130N for identification marking of U.S. military property is mandatory, and all items must be physically marked in accordance with RQ017 requirements. Inspection and acceptance occur at the origin, with sampling governed by MIL-STD-1916 or equivalent zero-based sampling plans, and all attributes must be verified using strict AQL standards: critical at 0.1, major at 1.0, minor at 4.0. Packaging must adhere to ASTM D3951 as supplemented by DLA’s Master List of Technical and Quality Requirements and MIL-STD-129 for labeling, with palletization following RP001 guidelines. Delivery is FOB origin, with a required delivery date of March 13, 2027, and a need ship date of January 31, 2027, under a 171-day performance window. The contract mandates zero variance in quantity and requires all documentation and labeling to reflect the DLA unit of issue and purchase unit as defined in official DLA resources. Final delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
SLEEVE, EXPANSION MA
Solicitation # SPE8E5-26-T-3767
The contract is for the procurement of 1,023 units of a SLEEVE, EXPANSION MA, identified by NSN 3460014986519 and part number FTS-4-0-3-8, under solicitation SPE8E5-26-T-3767, issued by the Department of Defense through the DDSP New Cumberland Facility. Delivery is required at the destination address in New Cumberland, Pennsylvania, with a 153-day delivery timeframe from the date of order, and the contract specifies FOB Destination terms. All items must comply with stringent technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging and labeling must strictly follow MIL-STD-129 for marking and 2D barcoding, with palletization governed by RP001 DLA Packaging Requirements for Procurement. The Unit of Issue is each (EA), with zero variance allowed in quantity, and inspection and acceptance occur at the destination point by the Government. The contract mandates compliance with multiple Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement clauses covering cybersecurity (252.204-7012), hazardous materials labeling, employment eligibility, trafficking in persons, sustainable products, whistleblower protections, and restrictions on covered defense telecommunications equipment. Offerors must possess a valid Unique Entity Identifier and CAGE code, and are required to submit accurate representations of their size and socioeconomic status, including any joint venture affiliations. Invoicing must be submitted through Wide Area WorkFlow, and all hazardous materials must be documented with a complete list and corresponding Safety Data Sheets prior to award, with ongoing updates required if compositions change. The contract includes mandatory adherence to federal regulations on material safety, export control, and government information safeguarding, and prohibits the use of unauthorized contractors for telecommunications equipment. The original required delivery date is March 6, 2027, with a need ship date of January 18, 2027. Pricing for the 1,023 units is not explicitly stated in the CLIN, but award data indicates related line items sum to a total estimated value of $10,730.31, though this figure is derived from partial award records and may not represent the full contract value.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 488190
New
DIBBS
CAP, FILTER
Solicitation # SPEFA3-26-T-0336
This contract pertains to the procurement of a CAP, FILTER with the NSN 1650-LL-FFX-F347 and Parker Hannifin Corporation part number 3831355-101, quantity of 10 units, to be delivered FOB destination within 84 days of contract award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website, with revision control based on the solicitation or award date depending on acquisition type. Sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1, using zero acceptance criteria unless otherwise specified, with attributes classified as critical, major, or minor assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The item is designated as a critical application with no shelf life requirement. Packaging must conform to ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization following DLA Packaging Requirements. Unit of issue is each, with no variance allowed in quantity. Inspection and acceptance occur at the destination. The delivery address is the DLA Distribution Jacksonville facility, with parcel post addressed to the Fleet Readiness Center Southeast. The contract is issued under solicitation SPEFA3-26-T-0336 with a required delivery date of August 4, 2026, and a response deadline of August 12, 2026.
DLA FLEET READINESS CENTER SOUTHEAST

POSTED

about 18 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488190
New
DIBBS
SET SCREW
Solicitation # SPEFA5-26-T-0974
This contract pertains to a single set screw with NSN 5305-LN-003-5502, procured by the Defense Logistics Agency under solicitation SPEFA5-26-T-0974, with a required delivery within five days of contract award. The item is designated as a critical application item for Hydro-Aire Aerospace Corp, part number 83691, and must comply strictly with MIL-STD-130N for identification marking of U.S. military property, with sampling governed by MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based sampling plan. Unless otherwise specified, all attributes not explicitly categorized are treated as major, and acceptance criteria demand zero non-conformances in the sampled lot. Packaging must adhere to ASTM D3951 but is subordinate to all DLA Master List of Technical and Quality Requirements, and labeling must conform to MIL-STD-129 with unit pack details as specified. Palletization follows DLA packaging guidelines, and the item has no shelf life restriction. The delivery is FOB destination, with inspection and acceptance occurring at the destination, and zero variance in quantity is permitted. The item must be shipped by the fastest traceable means, with parcel post strictly prohibited; freight must be sent to the specified address at Cherry Point, NC, using the provided freight and contact details. The required delivery date is August 6, 2026, and the contract includes mandatory government-only use identifiers for tracking and processing. The unit of issue is each (EA), with a total quantity of one and a unit price of $1.00, and the procurement is subject to all applicable technical, quality, and packaging standards listed in the DLA Master List, which override any conflicting commercial standards.
Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488190
New
DIBBS
3851718-101 PIN ( LLFF
Solicitation # SPEFA3-26-T-0335
The contract pertains to the procurement of two units of part number 3851718-101, a critical application item manufactured by Parker Hannifin Corporation with CAGE code 0000092003, identified by NSN 5315LLFFXF362, under solicitation SPEFA3-26-T-0335 issued by the Defense Logistics Agency. The total contract value is $8.00, with each item priced at $2.00, delivered in two separate CLINs of two units each, with a required delivery date of August 6, 2026, and a five-day lead time from order placement. Delivery is FOB destination to the Fleet Readiness Center Southeast in Jacksonville, Florida, with inspection and acceptance also occurring at the destination. Item Unique Identification is not required under DFARS 252.211-7003(c)(1)(i), but bare item marking per RQ017 and packaging labeling must conform to MIL-STD-129, including application of the CAGE code and barcoding per standardized military logistics requirements. Packaging must adhere to ASTM D3951, unless superseded by the DLA Master List of Technical and Quality Requirements, which takes precedence, and palletization must follow RP001. Parcel post is strictly prohibited, and shipments must be sent via the fastest traceable means. Sampling methodology must comply with MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan; if drawings or specifications define critical, major, or minor attributes, they must be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are considered major, and if MIL-STD-105 or ASQ Z1.4 is used for sample sizing, acceptance requires zero non-conformances. The supplier must comply with all applicable DLA technical and quality requirements referenced via RA001. Contractual clauses mandate compliance with cybersecurity standards including NIST SP 800-171, safeguarding of controlled unclassified information, prohibition of covered telecommunications equipment, hazardous material handling, trafficking-in-persons prevention, employment eligibility verification, sustainable products, and accelerated payments to small business subcontractors. Payment must be submitted electronically via Wide Area WorkFlow
Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
CAP
Solicitation # SPEFA5-26-T-0956
This contract, issued under solicitation number SPEFA5-26-T-0956 by the Defense Logistics Agency Fleet Readiness Center, is a simplified acquisition for a single unit of a military component identified by NSN 1560LLNC08714 and part number 205-030-724-047 from Bell Textron Inc. Delivery is required within 50 days, with an original delivery date of October 29, 2026, and is FOB destination with zero tolerance for quantity variance. The Government will inspect and accept the item at the destination address in Cherry Point, North Carolina, using the freight shipping address provided. All packaging must comply with ASTM D3951, but the DLA Master List of Technical and Quality Requirements takes precedence, and palletization must adhere to RP001: DLA Packaging Requirements for Procurement. Marking and labeling must follow MIL-STD-129 for shipment and storage, and unique identification of the item must comply with MIL-STD-130N(1) as mandated for U.S. military property. The material has no shelf life requirement. Quality assurance sampling must follow MIL-STD-1916 or ASQ Z1331, Table 1, or an equivalent zero-based sampling plan, with attributes classified as critical, major, or minor assigned AQLs of 0.1, 1.0, and 4.0 respectively, and corresponding verification levels of VII, IV, and II; unspecified attributes are treated as major. MIL-STD-105/ASQ Z1.4 may be used to determine sample size, but acceptance requires zero non-conformances unless otherwise specified. The contract is anticipated to be awarded as a firm-fixed-price contract under an automated process, likely using a Lowest Price Technically Acceptable methodology. Multiple FAR and DFARS clauses are incorporated, including inspection requirements under 52.246-2, cybersecurity safeguards under 252.204-7012, prohibitions on covered telecommunications equipment under 252.204-7018, trafficking in persons compliance under 52.222-50, and hazardous material handling restrictions under 252.223-7006. Payment must be submitted via WAWF, and compliance with employment eligibility verification, equal opportunity, and
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of State → Acquisitions - Rpso Frankfurt

Same awarding agency

NAICS: 238320
New
Federal
Exterior Painting and Surface Coating ServicesThe contract calls for the application of protective and aesthetic paint finishes on the exterior façades of U.S. Consulate facilities in Frankfurt, encompassing comprehensive surface preparation, priming, and topcoating to ensure durability and visual conformity to federal standards. Work must be performed in accordance with rigorous quality and safety protocols suitable for diplomatic properties, with all materials and methods selected to withstand local environmental conditions and preserve the architectural integrity of the buildings. The scope includes full-cycle exterior coating services from initial surface evaluation through final inspection, with an emphasis on minimizing operational disruption to consulate activities. This is a subcontract opportunity under NAICS code 238320 for exterior painting and surface coating services, issued by the Department of State through its Acquisitions - Rpso Frankfurt office. The solicitation was posted on August 4, 2026, with responses due by September 10, 2026. While no set-aside designation is specified, performance is strictly limited to the Frankfurt location, and contractors must demonstrate experience with government-funded exterior works, adherence to federal specifications, and the ability to meet stringent security and compliance requirements associated with diplomatic facilities. All work must be completed on schedule without compromising the safety or functionality of the consulate premises.
Painting and Wall Covering Contractors

POSTED

about 23 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 333613
New
Federal
Power and Environmental Control SystemsThe contract seeks the supply and integration of independent power generation, HVAC, and climate control systems designed to ensure environmental stability in laboratory settings located in remote areas. These systems must operate reliably without reliance on external infrastructure, providing consistent temperature, humidity, and power conditions critical for sensitive scientific operations. The equipment must be ruggedized for harsh conditions and capable of autonomous or minimally managed function over extended periods. Integration requirements include seamless compatibility between power sources and climate control units to maintain precise lab parameters under fluctuating external environments. The solicitation is classified as a subcontract under NAICS code 333613, indicating a focus on industrial machinery manufacturing with relevance to environmental control systems. It is issued by the Department of State through its Acquisitions - Rpso Frankfurt office, with performance expected to occur in Kampla. The deadline for responses is August 15, 2026, with no set-aside type specified, meaning it is open to all qualified contractors regardless of business size or ownership category. No point of contact details are provided in the data, and the contract's online portal link directs interested parties to SAM.gov for further submission instructions.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334510
New
Federal
Diagnostic Instrumentation and Reagents SupplyThe contract titled Diagnostic Instrumentation and Reagents Supply involves the provision of critical laboratory equipment including PCR machines, centrifuges, and microscopes along with necessary reagents for the field detection of high-risk pathogens such as viral hemorrhagic fever agents. This subcontract is intended to support rapid diagnostic capabilities in resource-limited environments, specifically targeting the place of performance in Kampla, to enhance preparedness and response to outbreaks. The equipment and reagents must meet stringent performance standards to ensure accurate and timely identification of infectious agents under challenging field conditions. The solicitation was posted on August 4, 2026, with a firm response deadline of August 15, 2026, at 9:59 PM. It falls under NAICS code 334510, which classifies the manufacture of medical and diagnostic instruments. The contracting authority is the Department of State through its Acquisitions - Rpso Frankfurt office, indicating this effort is tied to international health security and diplomatic response initiatives. There is no set-aside designation specified, meaning open competition is permitted, and all prospective suppliers must be prepared to deliver fully functional, certified, and field-ready systems in compliance with technical requirements for pathogen detection in remote settings.
Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333992
New
Federal
Biosafety Cabinet and Containment Equipment SupplyThe contract titled "Biosafety Cabinet and Containment Equipment Supply" seeks the provision of certified Class II biosafety cabinets, fume hoods, and specialized containment systems designed for secure handling of infectious agents within BSL-2 and BSL-3 environments. These systems must meet stringent international safety standards to ensure personnel, environmental, and operational protection during research or diagnostic activities involving biohazardous materials. The equipment is required to support critical functions in a designated performance location in Kampla, with all deliveries and installations compliant with applicable biosafety protocols and regulatory requirements. Subcontracting entities are invited to respond by the deadline of August 15, 2026, at 9:59 PM, following a solicitation issued by the Department of State through its Acquisitions - Rpso Frankfurt office. The contract falls under NAICS code 333992, which classifies it under other commercial and service machinery manufacturing, indicating a focus on specialized industrial equipment production. There is no set-aside designation specified, and the procurement is structured as a subcontract, suggesting integration into a larger program or framework. All submitted proposals must demonstrate technical capability, compliance with biosafety certifications, and the ability to deliver and validate equipment under controlled conditions tailored to high-containment laboratory needs.
Welding and Soldering Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336612
New
Federal
Mobile Laboratory Unit Design and IntegrationThe contract involves the engineering and integration of deployable mobile lab units designed to meet rigorous operational standards, with a focus on structural integrity, environmental control systems, power distribution, and a biosafety level–compliant internal layout. These mobile laboratories must be fully functional, transportable units capable of supporting sensitive scientific or medical operations in field environments, requiring precise coordination between mechanical, electrical, and biological safety systems to ensure compliance with international biosafety protocols. The technical scope demands interdisciplinary integration of components that operate reliably under dynamic conditions, including temperature regulation, airflow management, emergency power redundancy, and seamless sterilization workflows. The contract is classified as a subcontract under NAICS code 336612, which pertains to other transportation equipment manufacturing, indicating a specialized manufacturing and system integration effort. It is issued by the Department of State through its Acquisitions – Rpso Frankfurt office, with performance expected to take place in Kampla. The opportunity was posted on August 4, 2026, and responses are due by August 15, 2026, leaving a limited window for qualified vendors to submit technical and financial proposals. While no set-aside provisions or point of contact details are provided, the urgency and specificity of the requirements suggest a high-priority mission need for rapid deployment lab capabilities.
Boat Building

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 238320
New
Federal
Exterior Painting and Façade Repair at the U.S. Consulate General Frankfurt
Solicitation # 19GE5026R0116
The U.S. Consulate General in Frankfurt is preparing to issue a Request for Proposal for exterior painting and facade repair services across its compound and associated government housing, combining historic and modern structures. The contract will be a Firm-Fixed Price Indefinite Delivery/Indefinite Quantity agreement with one base year and four option years, allowing for flexible tasking over time. Work encompasses a wide range of tasks including scaffolding and lift installation, surface inspections, plaster damage assessment and repair using both cement stucco and EIFS systems, pressure washing, joint sealant replacement, priming, and multiple coats of paint. Additional responsibilities include metal element painting, temporary protective coverings, and thorough site cleanup. Annual estimated quantities are substantial, covering up to 60,000 square meters of painting and surface preparation, 5,000 square meters of plaster repair, 2,000 square meters of EIFS replacement, 2,000 linear meters of sealant work, and 50,000 square meters of scaffolding use. The solicitation, scheduled for release in August 2026 under number 19GE5026R0116, will be published on SAM and is open only to firms registered in the U.S. System for Award Management. Proposals must be submitted in English, and all work must comply with U.S. federal procurement laws. Contractors must hold all required German permits, insurances, and licenses to legally operate in the country, and must demonstrate proficiency in both written and spoken English. Although the place of performance is Frankfurt, Germany, the contracting office is based in Washington, D.C., and the point of contact is Wencke Jacobsen of the Department of State. No set-aside preferences apply, and eligibility is not restricted based on business size or category, though compliance with U.S. federal requirements is mandatory.
Painting and Wall Covering Contractors

POSTED

about 23 hours ago

DEADLINE

in about 1 month
View Details