Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Long-Term Maintenance and Sustaining Engineering Support

Active

Federal

Response Deadline08/13/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract supports ongoing maintenance, troubleshooting, firmware updates, and sustaining engineering for COSMO modules across up to four optional performance periods, ensuring long-term operational reliability and technological alignment. Work is focused on maintaining system integrity and performance through proactive engineering efforts, with all activities centered at the place of performance in Boulder, Colorado, 80305. This is a subcontract classified under the Small Business Set Aside program, reserved exclusively for small businesses as defined by the SBA, and falls under NAICS code 811212 for electronic and other repair services. The opportunity was posted on July 31, 2026, with responses due by August 13, 2026, and is managed by the Department of Commerce through its National Institute of Standards and Technology division.

General Info

Small business subcontract for COSMO module maintenance and updates in Boulder, Colorado, under NAICS 811212.

Agency

Department Of Commerce NistView Agency

NAICS

811212 - Computer and Office Machine Repair and MaintenanceView NAICS

Place of Performance

Boulder, CO, 80305, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 31

subcontract

Response DeadlineAug 13

Submission deadline

Response Deadline

08/13/2026, 08:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Commerce Nist

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Commerce Nist

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Ongoing maintenance, troubleshooting, firmware updates, and sustaining engineering for COSMO modules over up to four option periods.

Similar Contracts

Same NAICS industry code

Avionics and Instrumentation RepairThe contract titled Avionics and Instrumentation Repair requires the comprehensive diagnosis, repair, and calibration of aircraft avionics systems including radios, GPS units, transponders, and flight instruments. All work must be performed in strict accordance with Federal Aviation Administration regulations and manufacturer-specific guidelines to ensure airworthiness and operational reliability. This subcontract is open for response until September 2, 2026, with an posted date of August 1, 2026, and falls under the NAICS code 811212 for aircraft maintenance and repair services. The contracting entity is listed as the Sheriff’s office in Arizona, though no specific office address or point of contact details are provided. Work must be performed at an unspecified location within Arizona, and potential bidders should reference the provided web link for additional submission instructions.

POSTED

about 13 hours ago

DEADLINE

in about 1 month

On-Site Installation and Training ServicesThe contract requires comprehensive on-site delivery, installation, configuration, and staff training for the full ObservSMART patient monitoring system at a Department of Veterans Affairs facility. The work must be performed at the VA location, ensuring seamless integration of the system into existing clinical workflows, with all hardware and software components properly set up and calibrated to meet operational standards. Qualified personnel must be available to provide hands-on training to VA healthcare staff, ensuring competency in system operation, troubleshooting, and routine maintenance to support uninterrupted patient care. The solicitation is classified as a subcontract under NAICS code 811212 and is open for response until August 6, 2026, with the opportunity posted on August 1, 2026. The acquiring entity is the 256-NETWORK Contract Office 16 (36C256), and the performance location is tied to a VA facility, though specific city or state details are not provided. The contract focuses entirely on service execution rather than product procurement, emphasizing technical expertise, logistical coordination, and workforce readiness to deliver a fully operational monitoring solution tailored to the needs of the VA’s clinical environment.

256-NETWORK Contract Office 16 (36C256)

POSTED

about 16 hours ago

DEADLINE

Sterile Storage Cabinet Preventive Maintenance & Repair ServicesThe contract seeks a Service-Disabled Veteran-Owned Small Business to provide preventive maintenance, diagnostics, and repair services for sterile storage cabinets across VA medical facilities, ensuring full compliance with original equipment manufacturer procedures and the AAMI ST-79:2010 Part 7.7 standards for sterilization and infection control. All work must be performed with precision and adherence to industry best practices to maintain the integrity of sterile environments critical to patient safety in healthcare settings. The services are expected to be delivered at the designated place of performance in Los Angeles, California, with the zip code 90073, and are part of a subcontract under the Department of Veterans Affairs. The opportunity is formally posted under the NAICS code 811212 for commercial and industrial machinery and equipment repair and maintenance, with a service-disabled veteran-owned small business set-aside designation, requiring the bidder to meet specific ownership and control criteria. The solicitation was posted on August 1, 2026, with responses due by August 7, 2026, at 6:00 PM ET, and is managed by the 262-NETWORK Contract Office 22. Failure to meet the technical requirements, compliance standards, or eligibility conditions will result in disqualification. All contractors must be prepared to support multiple VA facility locations under the same operational framework and demonstrate proven experience in medical equipment maintenance.

262-NETWORK Contract Office 22 (36C262)

POSTED

about 16 hours ago

DEADLINE

On-Site Installation and Integration ServicesThe contract involves the physical installation, calibration, and basic integration of datacard print heads into existing ID card printing systems at the regional office operated by the South East Regional Health Authority under the Government of Jamaica. Services must be performed on-site and require technical expertise to ensure seamless compatibility with current printing infrastructure, including proper alignment, configuration, and functionality testing of the new print heads. The work is classified under NAICS code 811212, indicating it pertains to electronic and other equipment repair and maintenance. The contract is structured as a subcontract and was posted on August 1, 2026, with no specific set-aside type or solicitation number provided. Performance is expected to occur at the regional office location, though exact geographic details are unspecified. There is no designated point of contact listed, and the official reference link directs to the Jamaica Electronic Public Procurement System for further administrative details. The scope is limited to foundational integration tasks without mention of extended support, training, or system upgrades beyond the initial deployment phase.

South East Regional Health Authority

POSTED

DEADLINE

Biomedical Installation & Commissioning ServicesThe contract involves the complete on-site installation, calibration, safety testing, system integration, and operational commissioning of a Holmium Laser System at Spanish Town Hospital under the jurisdiction of the South East Regional Health Authority, Government of Jamaica. All services must be performed at the hospital location, ensuring the equipment is fully operational, compliant with safety standards, and seamlessly integrated into existing medical infrastructure. The work includes verifying system performance through precise calibration and conducting thorough safety evaluations to meet clinical and regulatory requirements prior to handover. This subcontract falls under NAICS code 811212, indicating specialized repair and maintenance services for medical equipment, and is intended to support the hospital’s capacity to deliver advanced urological and surgical treatments. The posting date indicates the opportunity was made public in August 2026, and the work is expected to be completed on site with no alternative performance locations allowed.

South East Regional Health Authority

POSTED

DEADLINE

Warranty, Repair, and Technical Support ServicesThe contract pertains to post-delivery repair, maintenance, and technical support services for MOXA equipment under warranty or existing service agreements, ensuring continued operational reliability of critical hardware. It falls under the NAICS code 811212 for electronic equipment repair and maintenance and is designated as a subcontract, indicating it supports a broader procurement or service initiative by the Texas Department of Transportation. The solicitation was posted on July 31, 2026, with a response deadline of August 14, 2026, requiring potential vendors to submit proposals within this window to qualify for award. Services are expected to be performed in support of Texas state operations, though the exact location of performance is unspecified. The contract emphasizes timely and qualified technical assistance to maintain system uptime and compliance with warranty terms, with no set-aside provisions indicated, allowing open competition among qualified service providers.

Texas Department of Transportation

POSTED

DEADLINE

Ongoing Maintenance & Technical SupportThe contract seeks a subcontractor to provide ongoing field maintenance and technical support for deployed surveillance systems across Texas, with responsibilities including on-site repair, troubleshooting, software updates, and replacement of faulty components. This work is critical to maintaining the operational integrity of surveillance infrastructure used by the Texas Department of Criminal Justice and must be performed reliably and promptly across all designated locations in the state. The solicitation is open for bids through August 14, 2026, and falls under the NAICS code 811212 for electronic equipment repair and maintenance. The contract is classified as a subcontract with no set-aside provisions, indicating it is open to all qualified entities regardless of business size or ownership status. While specific performance locations are not detailed, work is expected to occur wherever surveillance systems are installed throughout Texas, requiring flexible and responsive service capabilities. The Texas Department of Criminal Justice is the contracting agency, and bidders must ensure compliance with all technical and service requirements specified in the solicitation to be considered for award.

Texas Department of Criminal Justice

POSTED

DEADLINE

HUB-Certified Small Business Participation (Supplier or Service)Texas HUB-certified small businesses are invited to participate as suppliers or service providers under a subcontract opportunity issued by the Trinity River Authority of Texas. The contract supports procurement activities in the areas of maintenance, calibration, training, and supply services, with a focus on engaging certified HUB entities to fulfill these needs. The solicitation is open to businesses that meet the HUB certification requirements and are prepared to deliver services or products aligned with the NAICS code 811212, which pertains to industrial and commercial machinery and equipment repair and maintenance. Interested parties must submit responses by August 14, 2026, at 5:00 a.m. Central Time, following the guidelines outlined in the solicitation posted on the Trinity River Authority’s procureware platform. Participation is limited to Texas-based HUB-certified firms, and the contract is specifically structured to promote small business inclusion in state-related infrastructure and operational support.

Trinity River Authority of Texas

POSTED

DEADLINE

Preventive & Corrective Maintenance for Water Quality InstrumentsThe contract encompasses scheduled and on-demand maintenance, troubleshooting, and repair services for HACH analytical instruments used within the Central Regional Wastewater System. Services include comprehensive diagnostics, part replacements, and system validation to ensure continuous and accurate water quality monitoring. The work is critical to maintaining operational integrity and regulatory compliance for wastewater treatment operations, with a focus on preventive measures to minimize downtime and corrective actions to rapidly resolve malfunctions. Performance is required at the Central Regional Wastewater System under the oversight of the Trinity River Authority of Texas. The contract is classified as a subcontract under NAICS code 811212, which pertains to industrial and commercial machinery and equipment repair and maintenance. The solicitation was posted on July 31, 2026, with responses due by August 14, 2026. All maintenance activities must adhere to industry-standard protocols and ensure the reliability of analytical data used for environmental compliance and system management.

Trinity River Authority of Texas

POSTED

DEADLINE

Printer Maintenance and Repair ServicesThe contract entails ongoing servicing, maintenance, and repair of laser printers for the St. Thomas Health Department under the Government of Jamaica, with services including routine inspections, diagnostic troubleshooting, replacement of worn or faulty components, and prompt on-site technical support to ensure uninterrupted printer operation. All work must be performed at the designated location within St. Thomas, adhering to performance standards that prioritize reliability and minimal downtime for critical health department operations. The contract is classified as a subcontract with a NAICS code of 811212, indicating it falls under office administrative services, specifically printer repair and maintenance. It was posted on July 31, 2026, and is managed by St. Thomas Health Services, though no specific point of contact or detailed performance location information is provided. The absence of a solicitation number and set-aside designation suggests it may be competitively bid internally or through existing vendor agreements. The contract remains active through the duration of service delivery as required by the health department’s operational needs.

St. Thomas Health Services

POSTED

DEADLINE

Extended Warranty and Maintenance SupportThis contract provides extended warranty and maintenance support for a nanoindenter system, covering post-installation preventive maintenance, troubleshooting, and repair services over a multi-year term. The scope includes ongoing technical support to ensure optimal performance, minimize downtime, and address any operational issues that arise after initial installation. Services are required to be delivered in accordance with industry best practices and must align with the system’s manufacturer specifications to maintain technical integrity and reliability. The contract is issued as a subcontract by Texas State University under NAICS code 811212, which classifies it within the repair and maintenance services sector. It was posted on July 31, 2026, with a response deadline of August 14, 2026, indicating a short but critical procurement window. The place of performance and specific delivery location are not detailed, but services are expected to be performed at the university’s facilities where the nanoindenter is installed. All work must be completed by qualified personnel, and the contractor is expected to provide timely, documented responses to service requests throughout the contract duration.

Texas State University

POSTED

DEADLINE

Installation and Calibration ServicesTexas State University is seeking a subcontractor to perform on-site installation, alignment, calibration, and validation of a nanoindenter system at its facilities. The work requires technical expertise to ensure the system is properly set up and verified for accurate performance under laboratory conditions. The solicitation was posted on July 31, 2026, with responses due by August 14, 2026, at 11:00 PM. The contract falls under NAICS code 811212, which pertains to electronic and precision equipment repair and maintenance. The place of performance and organizational details are not fully specified, but the work must occur at the university’s location. The procurement is managed through the Texas SmartBuy platform, and interested parties must submit proposals through the provided link before the deadline.

Texas State University

POSTED

DEADLINE

More opportunities from Department Of Commerce Nist

Same awarding agency

Spare Parts and Consumables SupplyThe contract is for the supply of critical spare parts and consumables necessary to maintain the continuous operation of ultra-low temperature freezers, including essential components such as compressors, controllers, and door seals, as well as consumables like batteries and cleaning agents. The requirement is structured as a subcontract under a Small Business Set Aside designation, ensuring eligibility and prioritization for small businesses, with the NAICS code 423440 indicating classification under wholesale trade of motor vehicle parts and supplies. The solicitation was posted on July 31, 2026, with responses due by August 13, 2026, and is managed by the Department of Commerce, specifically under NIST, though specific performance location and point of contact details are not provided. The nature of the supply is mission-critical, aimed at sustaining serviceability and minimizing downtime for sensitive laboratory equipment requiring precise temperature control.

Other Commercial Equipment Merchant Wholesalers

POSTED

DEADLINE

Long-Term Maintenance and Service SupportThis contract provides long-term maintenance and service support for installed ultra-low temperature freezers, encompassing ongoing preventive maintenance, regular calibration, alarm system verification, and prompt emergency repairs to ensure operational continuity and equipment reliability. Remote diagnostics capabilities are included to facilitate proactive issue identification and reduce downtime, supporting sustained performance over the contract period. The work is designated as a Small Business Set Aside under NAICS code 811211, restricted to small businesses, and falls under a subcontract structure managed by the Department of Commerce, National Institute of Standards and Technology. The solicitation was posted on July 31, 2026, with responses due by August 13, 2026, and performance will be carried out at unspecified locations under the oversight of the agency.

Consumer Electronics Repair and Maintenance

POSTED

DEADLINE

Post-Delivery Installation and Commissioning ServicesThe contract calls for on-site installation, leveling, electrical verification, and operational testing of ultra-low temperature freezers at the NIST facility in Gaithersburg, with full support for government acceptance testing. All work must be performed at the specified location to ensure the equipment meets stringent performance and safety standards required for federal laboratory use. The services are critical to validating proper functionality prior to formal acceptance by government personnel. This is a Small Business Set Aside subcontract under NAICS code 811212, limited to small business concerns, and the response deadline is August 13, 2026. While specific details about contract value or deliverables beyond installation and testing are not provided, the scope emphasizes precision and compliance with federal infrastructure requirements. The solicitation was posted on July 31, 2026, and is managed by the Department of Commerce through the National Institute of Standards and Technology.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Upright Ultra-Low Temperature Freezers SupplyThe contract involves the supply and delivery of six fully assembled upright ultra-low temperature freezers designed to maintain a consistent temperature of -86°C, equipped with CFC-free refrigerants, digital temperature controls, audible and visual alarms, and stainless-steel interiors to ensure durability and compliance with laboratory standards. An optional provision allows for the procurement of up to three additional units, bringing the total potential order to nine freezers, subject to future exercise by the contracting entity. All units must meet stringent performance and safety specifications to support critical research applications. This is a Small Business Set Aside subcontract under NAICS code 333318, reserved exclusively for small businesses, issued by the Department of Commerce through NIST. The solicitation was posted on July 31, 2026, with responses due by August 13, 2026, at 5:00 PM. While the place of performance and point of contact details are not specified, the contract is governed under federal acquisition regulations and intended for use within U.S. government research facilities supporting scientific and technical missions.

Other Commercial and Service Industry Machinery Manufacturing

POSTED

DEADLINE

Secure Delivery and Logistics to NIST CampusThe contract pertains to the secure transportation and final delivery of the SDR system to the National Institute of Standards and Technology’s Gaithersburg, Maryland facility under F.O.B. Destination terms, meaning the vendor assumes full responsibility for the shipment until it reaches the designated receiving location. Successful performance requires close coordination with NIST’s on-site receiving staff, strict adherence to a predefined delivery schedule, and full compliance with all campus access protocols, including security clearances, vehicle restrictions, and personnel screening procedures. The delivery must be executed with precision to ensure the integrity and safety of the sensitive equipment throughout transit and upon arrival. This subcontract is designated as a Small Business Set Aside under NAICS Code 484220, indicating it is reserved exclusively for small businesses in the truck transportation industry. The opportunity was posted on July 31, 2026, with responses due by August 14, 2026, and is managed by the Department of Commerce through NIST. Performance is required entirely at the Gaithersburg campus with a ZIP code of 20899. Bidders must demonstrate capability in handling high-security logistical operations, maintaining schedule integrity, and navigating federal facility requirements to meet the stringent expectations of the contracting entity.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Technical Documentation and Compliance PackagingThe contract requires the preparation and submission of comprehensive technical compliance documentation for products, including detailed specifications, country of origin statements, warranty terms, manufacturer authorization letters, and forms that meet Federal Acquisition Regulation requirements. All documentation must be accurate, complete, and fully aligned with federal procurement standards to ensure eligibility and compliance. Additionally, the contractor is responsible for packaging and labeling goods in strict accordance with F.O.B. Destination guidelines, ensuring proper handling, tracking, and delivery compliance. This is a Small Business Set Aside subcontract under NAICS code 541611, awarded by the Department of Commerce through its National Institute of Standards and Technology. The solicitation was posted on July 31, 2026, with a response deadline of August 14, 2026, and performance is expected to be conducted at Gaithersburg, Maryland, with a zip code of 20899. The opportunity is reserved exclusively for small businesses, emphasizing support for small business participation in federal technical and compliance services.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

High-Performance Software-Defined Radio (SDR) System SupplyThe contract is for the supply and delivery of a commercially available high-performance software-defined radio system equivalent to the NI USRP X420, requiring full integration of firmware, software, power supplies, cabling, and all necessary accessories. The system must be new, factory-sealed, and procured exclusively from an authorized U.S. distributor to ensure authenticity and compliance with technical standards. All components must be delivered as a complete, operational unit ready for immediate deployment without requiring additional configuration or parts. This is a small business set-aside subcontract under NAICS code 334220, awarded by the Department of Commerce through NIST, with performance located in Gaithersburg, Maryland. The solicitation was posted on July 31, 2026, and responses are due by August 14, 2026. The requirement emphasizes strict adherence to sourcing guidelines and system equivalence to ensure compatibility with existing infrastructure and operational performance benchmarks. Only qualified small businesses may respond, and delivery must align with the designated place of performance to support government missions requiring secure, reliable, and high-performance radiofrequency capabilities.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

DEADLINE

Specialized Instrumentation Transportation and DeliveryThe contract pertains to the specialized transportation and delivery of sensitive metrology equipment under FOB Destination terms, requiring secure, climate-controlled logistics to ensure the integrity and functionality of the instruments en route to the National Institute of Standards and Technology in Gaithersburg, Maryland. The equipment is highly precise and environmentally sensitive, mandating strict adherence to temperature, humidity, shock, and vibration controls throughout transit, with all handling protocols aligned to maintain calibration standards and prevent field degradation. The opportunity is issued as a subcontract under NAICS code 484220, which classifies it within the truck transportation sector, and is managed by the Department of Commerce through NIST. The solicitation was posted on July 31, 2026, with a firm response deadline of August 11, 2026, at 3:00 PM local time. All deliveries must terminate at the designated place of performance in Gaithersburg, with the contractor assuming full responsibility for the condition of the equipment upon arrival and compliance with all federal handling, tracking, and documentation requirements for federal scientific assets.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Supply of Metrology-Grade Chilled Mirror HygrometersThe contract seeks the procurement and delivery of two high-precision chilled mirror dew point hygrometers certified to NIST traceability standards, specifically for deployment in mass calibration laboratories at NIST’s Gaithersburg facility. These instruments must meet exacting metrology requirements to ensure accurate humidity measurements critical to calibration workflows, with all components and calibration procedures adhering to international metrology benchmarks. Delivery timelines are tightly aligned with the response deadline of August 11, 2026, and the contract is structured as a subcontract under the Department of Commerce, NIST, with NAICS code 334516 indicating classification within instrument manufacturing. Performance is restricted to the Gaithersburg location, where the hygrometers will be integrated into existing calibration systems to support traceability chain integrity for mass and humidity standards. The requirement emphasizes validated accuracy, long-term stability, and documented traceability to NIST reference standards, with no set-aside provisions indicated.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Specialized Packaging, Shipping, and Handling of Sensitive Optical EquipmentThe contract requires specialized packaging, shipping, and handling of sensitive COSMO optical units from the manufacturer to the NIST facility in Boulder, Colorado, ensuring secure, climate-controlled transport throughout the journey. The equipment must be transported under strict environmental conditions to preserve integrity, with continuous shock monitoring to detect any impacts or deviations during transit. A full chain-of-custody tracking system must be implemented to document every handoff and movement, guaranteeing accountability and security from origin to final destination. All activities must comply with protocols designed to protect highly sensitive optical instruments from environmental and physical risks. This is a Small Business Set Aside under NAICS code 484220, designated for transportation and warehousing services, and is structured as a subcontract opportunity issued by the Department of Commerce through NIST. The solicitation was posted on July 31, 2026, with responses due by August 13, 2026. The place of performance is firmly established in Boulder at the 80305 ZIP code, where the units will be received and verified. While no specific point of contact is listed, interested parties must navigate the SAM.gov portal to access full details and submit proposals within the deadline window, ensuring all technical, security, and logistical requirements are fully addressed in compliance with federal procurement standards for sensitive scientific equipment.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Calibration, Installation, and On-Site Technical SupportThe contract obligates the vendor to perform on-site installation, calibration, alignment, and technical training for COSMO units at the NIST facility in Boulder, Colorado, with a critical focus on seamless integration with existing laser systems already in operation. All activities must be conducted in accordance with technical specifications to ensure precision and compatibility, requiring specialized expertise in optical instrumentation and metrology systems. The work is expected to be completed at the designated location, and the successful bidder must provide trained personnel capable of supporting the full lifecycle of deployment, including troubleshooting and operational handoff. This is a small business set-aside subcontract under NAICS code 541715, with a response deadline of August 13, 2026, and a posted date of July 31, 2026. The contracting entity is the Department of Commerce through NIST, and the place of performance is firmly established in Boulder, with a ZIP code of 80305. The vendor must be a certified small business and prepared to meet stringent technical and logistical requirements associated with federal laboratory operations. All deliverables must align with NIST’s standards for accuracy, documentation, and technical support.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

Design and Manufacture of Comb Offset Stabilization Module (COSMO)The contract seeks the complete design, fabrication, testing, and delivery of two ultra-stable Comb Offset Stabilization Modules (COSMO) tailored for use in precision optical frequency comb systems at the National Institute of Standards and Technology in Boulder, Colorado. These modules are critical components for maintaining the stability and accuracy of optical frequency combs used in high-precision metrology applications, requiring advanced engineering and rigorous quality control to meet stringent performance standards. The work must be completed under a Small Business Set Aside, indicating the contract is reserved for businesses certified under the Small Business Administration program, and falls under NAICS code 334515, which classifies it within the manufacturing of search, detection, navigation, guidance, and control instruments and controls. The solicitation was posted on July 31, 2026, with a firm response deadline of August 13, 2026, at 8:00 PM ET, providing potential vendors with a brief window to prepare and submit proposals. The place of performance is explicitly tied to Boulder, Colorado, where the modules will be integrated and validated within NIST’s existing infrastructure. This subcontract is part of a broader effort to enhance national capabilities in precision optical measurement, and the successful contractor will be expected to deliver fully tested, operational units meeting exacting technical specifications, with all phases—from initial design through final delivery—held to the highest standards of reliability and traceability.

Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

DEADLINE