Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Marine Training Vessels

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Federal Law Enforcement Training Center, under the Department of Homeland Security, has issued a forecast for the procurement of four 30-foot center console marine training vessels. Each vessel must be equipped with twin 300HP Yamaha outboard motors, a Garmin electronics package including radar and a chartplotter, and an aluminum double axle trailer. This requirement is designated as a small business set-aside under NAICS code 336612. The place of performance for these vessels will be in Glynco, Georgia. Primary points of contact for this procurement include Gary Scidmore and William Hays, with Allan Gray serving as the Small Business Specialist.

General Info

DHS seeks four 30-foot center console vessels with Yamaha motors for Glynco, Georgia.

Agency

Department of Homeland Security → Federal Law Enforcement Training Center

NAICS

336612 - Boat Building

Place of Performance

Glynco, GA, USA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJan 1

forecast

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment of Homeland Security → Federal Law Enforcement Training Center

Contacts3 people available

OfficeN/A

Organization / AgencyDepartment of Homeland Security → Federal Law Enforcement Training Center

Office AddressN/A

Contacts

Gary Scidmore

contact@example.gov

+1 (555) 000-0000

William Hays

contact@example.gov

+1 (555) 000-0000

Allan GraySmall Business Specialist/APFS Coordinator

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

4 30Ft Center Console vessels, with twin 300HP Yamaha Outboard motors, Garmin electronics package. radar/chartplotter. Aluminum double axle trailer.

Similar Contracts

Same NAICS industry code

Supplier of Marine Navigational Lights (NSN 6220016289651)This subcontract involves the procurement or manufacture of 85 units of Marine Navigational Lights meeting NSN 6220016289651 specifications. The supplier will support prime contractors delivering on DLA Troop Support Construction and Equipment contracts, with final delivery of the packaged and marked hardware to the DDSP New Cumberland facility. All deliverables must strictly adhere to packaging and marking standards MIL-STD-2073-1E, MIL-STD-129, and RP001. Additionally, the contractor is required to maintain full compliance with the Buy American Act and the Berry Amendment. The opportunity is categorized under NAICS code 336612 and is managed through the Department of Defense.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 11 hours ago

DEADLINE

O-Ring Component Supplier (NSN 5331-01-687-3913)This subcontract, managed by the Department of Defense under the DLA Weapons Support Land Supply Chain, requires the sourcing and manufacture of O-rings meeting NSN 5331-01-687-3913 specifications. These components are intended for prime contractors delivering naval spare parts to the USS COOPERSTOWN LCS 23. To ensure quality and longevity, the contractor must package the items in medium-duty, waterproof, greaseproof, and opaque bags designed to prevent UV deterioration, with each package containing two O-rings. Eligible suppliers must maintain an active SAM registration and strictly adhere to all NSN standards. The performance of this contract is located at FPO 34085 under NAICS code 336612. Interested parties must submit their responses by the deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

Supply of Water Closets (NSN 4510015608924)This subcontract, issued by the Department of Defense for the DDSP New Cumberland Facility, requires the procurement and delivery of five water closets meeting NSN 4510015608924 specifications. The selected provider must ensure all units are packaged according to RP001 DLA Packaging Requirements for Procurement and delivered to the designated government location in New Cumberland, Pennsylvania, following DIBBS system requirements. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 336612. Interested parties must adhere to the response deadline of November 9, 2026, to provide the necessary supplies for prime contractors supporting DLA Troop Support contracts.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 11 hours ago

DEADLINE

Solicitation # SPE7M4-27-T-1946

Solicitation SPE7M4-27-T-1946 is a small business set-aside fixed-price contract issued by the DLA Weapons Support Fluid Handling Division for the procurement of one marine hatch, identified by NSN 2040-01-655-3226. The required delivery date is October 23, 2026, with a delivery window of 10 days after receipt of order. The item is to be shipped to the 0553 CS BN CO A Composite AWCF SSF at Fort Hood, Texas. Inspection and acceptance will take place at the destination. The contractor must adhere to strict packaging and marking standards, including ASTM D3951, MIL-STD-129, and DLA packaging requirements RP001. Environmental compliance is mandatory, specifically the prohibition of Class I ozone-depleting chemicals. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses regarding cybersecurity, the Buy American Act, and the prohibition of covered defense telecommunications equipment. Quotations for this requirement were due by November 9, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 11 hours ago

DEADLINE

DOG, DOOR, MARINE

Solicitation # SPE7M4-27-T-1957

Solicitation SPE7M4-27-T-1957 is a small business set-aside issued by the DLA Weapons Support Fluid Handling Division for the procurement of one marine door dog, identified by NSN 2040-01-649-3701 and part number 124-7386935 (53711) PC 51. The requirement specifies a delivery lead time of 20 days after order, with the destination for inspection and acceptance being the USS Ronald Reagan CVN 76 in FPO AP 96616. The award may be processed via automated award, and a price evaluation preference is provided for HUBZone small business concerns. The contractor must adhere to strict quality and security standards, including a manufacturer inspection system compliant with SAE AS9003 or ISO 9001. The use of additive manufacturing is prohibited unless specifically authorized. Security requirements include CMMC Level 2 certification and compliance with DFARS 252.204-7012 for safeguarding covered defense information. Additionally, the item is subject to export controls under ITAR or EAR, requiring the contractor to have an approved US/Canada Joint Certification Program certification. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, and all invoicing must be processed through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 11 hours ago

DEADLINE

Manufacture of Cable Assembly AB and Cable TC9007-2This subcontract through the Department of Defense and DLA Mechanicsburg involves the manufacture of custom cable assemblies for prime contractors supporting Naval Surface Warfare Center projects. The scope of work specifically requires the fabrication of Cable Assembly AB and Cable TC9007-2 in strict accordance with drawings 8290958 and 8290586 under CAGE 53711. The contractor must maintain rigorous compliance with Department of Defense item unique identification reporting and DODISS standards. Additionally, the provider must demonstrate the capability to manage NOFORN specifications via DD Form 1425 to ensure the secure handling of sensitive information throughout the delivery of the completed assemblies.

SPRMM1 DLA Mechanicsburg

POSTED

about 16 hours ago

DEADLINE

in about 1 month

Manufacture and Supply of Check Valves (NIIN 016579547)This subcontract involves the manufacture and supply of 18 check valves (NIIN 016579547) for prime contractors supporting U.S. Navy NAVSUP projects. The contractor is responsible for fabricating the units according to Cage Code 34228 design 8590952-D1217483 and Technical Data Package Version 005, utilizing precision machining to ensure all specific tolerances are met. The agreement requires strict adherence to regulatory standards, including Buy American compliance and the provision of MSDS documentation per OSHA and FED STD 313. Additionally, the contractor must obtain source approval as outlined in the NAVSUP Philadelphia brochure. This project is managed under the Department of Defense via the Navsup Weapon Systems Support Mech agency.

Navsup Weapon Systems Support Mech

POSTED

about 16 hours ago

DEADLINE

TORQUE ASSIST ASSEM

Solicitation # N0010426QYA3Y

Solicitation NO0104-26-Q-YA3Y is a fixed-price requirement issued by NAVSUP Weapon Systems Support Mech for the teardown, evaluation, repair, and potential modification of the Torque Assist Assembly (NSN 7HH 2040-01-088-4976). The project is tied to the FY26 S&OP project with a planned award in FY27. The government intends to make a single award based on a trade-off where past performance is considered more important than price. Evaluation of past performance will utilize the DoD Supplier Performance Risk System (SPRS) color ratings. The contractor must adhere to strict quality and technical standards, including MIL-STD-130 for marking, MIL-STD-2073 for packaging, and ANSI/ESD S20.20 for electrostatic discharge control. A critical requirement is the total absence of metallic mercury in the supplied materials. Performance is measured by the Repair Turnaround Time (RTAT), calculated from the physical receipt of the asset in the Commercial Asset Visibility (CAV) system to the date of government acceptance. Government Source Inspection (GSI) is required, and all freight is handled as FOB Origin. Invoicing and receiving reports must be processed electronically through the Wide Area Workflow (WAWF) system. The extended deadline for quote submission is December 4, 2026, at 4:30 PM local time.

Navsup Weapon Systems Support Mech

POSTED

about 16 hours ago

DEADLINE

in about 1 month

SEGMENT #7 STERN

Solicitation # N0010427QLA16

Solicitation N00104-27-Q-LA16 is a Request for Quotation issued by NAVSUP Weapon Systems Support Mechanicsburg for the manufacture and delivery of one Segment #7 Stern (NSN 1940-01-676-6351). The item must be produced according to design reference Cage Code 66618 and comply with physical identification standards MIL-STD-130, Rev N. Delivery is required within 30 days of award, though accelerated delivery is encouraged, with shipping terms set as FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. Government source inspection is mandatory, and both inspection and acceptance will occur at the point of origin. The government will utilize a trade-off process for award, prioritizing past performance over price. Offerors must be authorized distributors of the original manufacturer to be considered. Technical requirements include strict adherence to MIL-STD-2073 for packaging and MIL-STD-129 for marking. The contract incorporates various federal regulations, including Buy American and Balance of Payments programs, and requires the use of Wide Area WorkFlow (WAWF) for invoicing and receiving reports. All proposals must be submitted by November 27, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 16 hours ago

DEADLINE

Solicitation # N0010426QYAJZ

Solicitation N00104-26-Q-YAJZ is a competitive, fixed-price procurement for the manufacture of Gland Actuators (NSN 2040-01-093-7730) for use on Navy submarines. The requirement is categorized under NAICS code 336612 with a small business size standard of 1,000. Award will be made to the eligible, responsible offeror with the lowest price technically acceptable (LPTA) quote, though the government may consider past performance as a higher priority than price when determining the most advantageous offer. Technical requirements specify that the actuators must be manufactured from Nickel-Aluminum-Bronze per ASTM B150/B150M and adhere to drawing 4398602. The contract mandates strict quality assurance, including a mandatory first article testing and inspection process and the submission of a Quality Inspection and Test Plan for government approval. All supplied materials must be mercury-free, and the contractor must provide comprehensive objective quality evidence, including certified mill certifications and nondestructive testing reports. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and receiving reports. Packaging and marking must comply with MIL-STD-2073-1 and MIL-STD-129, with specific requirements for domestic and overseas shipping levels. The contractor is responsible for all inspections at the origin, with final acceptance conducted by the cognizant DCMA-QAR in coordination with the Naval Surface Warfare Center, Philadelphia Division.

Navsup Weapon Systems Support Mech

POSTED

about 16 hours ago

DEADLINE

USCG Response Boat Small Third Generation (RB-S III)

Solicitation # 70Z02326R93250001

The United States Coast Guard is soliciting proposals for the Response Boat Small Third Generation (RB-S III) program to recapitalize its aging fleet of 29-foot RB-S II platforms. This total small business set-aside procurement, under NAICS code 336612, seeks to award up to four Indefinite-Delivery, Indefinite-Quantity (IDIQ) contracts for the design, production, testing, and delivery of approximately 411 boats and associated purpose-built trailers. The scope includes comprehensive logistics support, technical documentation, and crew familiarization services. The anticipated ordering period spans ten years, consisting of a two-year base period and an eight-year option period. The acquisition utilizes a two-phase competitive process. In Phase I, the government evaluates written proposals based on mission effectiveness, production and management, and price, with non-price factors being significantly more important. Up to four awardees will each receive an initial delivery order to construct one demonstrator boat and trailer. Phase II consists of a 90-day in-water demonstration to evaluate performance, with the final best-value tradeoff resulting in the selection of a single IDIQ contractor for all subsequent production orders. Phase I proposals are due by 1400 Eastern Time on November 20, 2026, and must be submitted electronically via the DoD Secure Access File Exchange.

POSTED

about 16 hours ago

DEADLINE

Galvanized Boat TrailerThis subcontract opportunity, managed by DAS Procurement for the State of Connecticut, involves the fabrication and delivery of a specialized galvanized steel tandem axle trailer. The equipment is specifically designed to support electrofishing vessels used in CT DEEP Fisheries Division projects, requiring precise weight and capacity specifications, the installation of rollers, and the integration of waterproof LED lighting within waterproof housings. The project falls under NAICS code 336612 and is intended for prime contractors operating on these division projects. Interested parties must submit their responses by the deadline of November 12, 2026, to provide the completed trailer as specified in the contract requirements.

DAS Procurement

POSTED

about 17 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

FY26-DOEE-WQD-Replacement Boat with Engine

Energy and Environment (DOEE)

POSTED

almost 57 years ago

DEADLINE

Five-year Blanket Purchase Agreement (BPA) to acquire new boats, repair boats, buy spare parts, and overhaul old boats for the Colombia Coast Guard and Marines

Bureau of International Narcotics and Law Enforcement Affairs

POSTED

almost 57 years ago

DEADLINE

4.7-Meter Inflatable Boats In Support of Foreign Military Sales

United States Coast Guard

POSTED

almost 57 years ago

DEADLINE

27-foot Boats in support of Foreign Military Sales-Philippines (ZB-P-LDF)

United States Coast Guard

POSTED

almost 57 years ago

DEADLINE

Foreign Military Sales Procurement of 12-Meter Boats in Support of SOUTHCOM

United States Coast Guard

POSTED

almost 57 years ago

DEADLINE

United States Coast Guard (USCG) Response Boat – Small Third Generation (RB-S III)

United States Coast Guard

POSTED

almost 57 years ago

DEADLINE

Swiftwater Rescue/Boats and Motors

Federal Emergency Management Agency

POSTED

almost 57 years ago

DEADLINE

Class 4 Inshore Patrol Vessels (IPVs)

Customs And Border Protection

POSTED

almost 57 years ago

DEADLINE

El Salvador (ZB-P-LEC) 25'-35' Boats

United States Coast Guard

POSTED

almost 57 years ago

DEADLINE

Provision of Specialized Boats to Pakistan Maritime Security Agency

Bureau of International Narcotics and Law Enforcement Affairs

POSTED

almost 57 years ago

DEADLINE

Maritime Non-Lethal Equipment Provision

Office of Acquisitions Management

POSTED

almost 57 years ago

DEADLINE

Rural Security Pre Operational and Logistics Support

Bureau of International Narcotics and Law Enforcement Affairs

POSTED

almost 57 years ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS