Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Mechanical Ventilation & LP Gas Systems

Active

Federal

Response Deadline09/25/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity, titled Mechanical Ventilation and LP Gas Systems, is a small business set-aside project under the Department of Defense for the NUWCDIVNPT agency. The scope of work involves installing ventilation systems, exhaust fans, and ductwork to ensure the safe enclosure of LP gas units and prevent gas accumulation. All installations must strictly comply with NFPA 58 Liquefied Petroleum Gas Code and ASME standards to deliver a fully operational and safe ventilation system for prime contractors. The project is located in Newport and is classified under NAICS code 238220. Interested parties should note that the solicitation was posted on August 26, 2026, with a response deadline of September 25, 2026, at 6:00 PM. This contract is designated as a total small business set-aside, meaning it is reserved specifically for small business concerns.

General Info

Small business set-aside for installing mechanical ventilation and LP gas systems in Newport.

Agency

Department Of Defense → Nuwc Division NewportView Agency

NAICS

238220 - Plumbing, Heating, and Air-Conditioning ContractorsView NAICS

Place of Performance

Newport, RI, 02841, USA

Set-Aside

SBA

Documents

This scope was carved out of N6660426Q0292.

The full solicitation package (5 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Construction- NUWCDIVNPT- Vaporizer Enclosure (Design/Build)

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 26

subcontract

Response DeadlineSep 25

Submission deadline

Response Deadline

09/25/2026, 06:00:00 PM UTCin 14 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Nuwc Division Newport

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Nuwc Division Newport

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installs ventilation systems and ensures the safe enclosure of LP gas units for prime contractors on NUWCDIVNPT projects. Installs exhaust fans, ductwork, and ventilation systems to prevent gas accumulation. Complies with NFPA 58 (Liquefied Petroleum Gas Code) and ASME standards. Delivers an operational ventilation system.

Similar Contracts

Same NAICS industry code

ICE 8A - Ft Benning Improvements

Solicitation # 70CMSW25R00000011

This firm-fixed-price task order, issued under a MACC multiple-award IDIQ contract by the Department of Homeland Security Immigration and Customs Enforcement, provides design-build services for life, safety, and operational improvements at Fort Benning, Georgia. The project has an estimated magnitude between 4.0 million and 4.5 million dollars and a period of performance not to exceed 365 days from the date of award. The scope of work includes the installation of aluminum awnings at the shipping and receiving dock and Fiske Range, turf replacement at Fiske Range, the demolition and site restoration of Building 2294, gutter and drainage improvements at Building 234, and the replacement and maintenance of commercial HVAC systems across Buildings 2949, 234, 1836, and 19. Additionally, the contractor will perform general facility improvements for Building 301 and the DAGr Team facility. Award will be based solely on the lowest total evaluated price, though the government will also evaluate the offeror's technical approach, design resources, and the validity of their methodology. Proposals must be submitted in two volumes: a technical and safety volume and a pricing volume using the provided CSI division template. The contract is subject to the Davis-Bacon Act, requiring prevailing wage rates and specific paid sick leave provisions. Key administrative requirements include the submission of payment requests via the Invoice Processing Platform accompanied by certified payroll, and the provision of performance and payment bonds. Final inspection and technical assistance will be managed by the Contracting Officer's Representative.

Bristol Alliance of Companies

POSTED

about 10 hours ago

DEADLINE

PIDC Project 3 - Dorm RTU Replacement and SCADA

Solicitation # 872287

This firm-fixed-price task order, issued under an 8(a) MACC IDIQ, involves the replacement and upgrade of Rooftop HVAC Units (RTUs) for the Alpha, Bravo, Charlie, and Delta dorms, as well as a SCADA system upgrade at the Port Isabel Detention Center in Los Fresnos, Texas. The project objective is to replace corroded and obsolete equipment with high-quality, coastal weather-resistant, and durable systems that exceed commercial standards. The scope includes removing existing RTUs, replacing necessary piping, electrical, and ducting, and installing new SCADA software and two chemical feed pumps in compliance with Texas Commission of Environmental Quality standards. The estimated magnitude of the project is between 1.2 million and 1.5 million dollars, with a period of performance of 365 days from the date of award. Award will be based solely on the lowest total evaluated price, provided the offeror demonstrates a sound technical approach, appropriate design resources, and a comprehensive quality control and safety program. Key requirements include the submission of a Quality Control Plan, a safety plan, and the designation of a Project Manager with at least five years of relevant federal contracting experience. The contractor must also provide a one-year warranty for installation and craftsmanship and ensure all personnel pass required background checks for site access. Compliance with the Davis-Bacon Act and associated executive orders regarding wages and sick leave is mandatory. All payment requests must be submitted electronically via the Invoice Processing Platform and accompanied by certified payroll.

Bristol Alliance of Companies

POSTED

about 10 hours ago

DEADLINE

RFQ7593 Smoke Detector Installation

Solicitation # RFQ7593

Management & Training Corporation (MTC) is soliciting bids for a fee-for-service subcontracting opportunity to provide smoke detector installation and fire system services at the Sierra Nevada Job Corps Center in Reno, Nevada. The scope of work requires the replacement of 43 smoke detectors across specific dormitory rooms, including 12 detectors in rooms 11, 15, and 18, 12 detectors in room 19, and 19 detectors in rooms 20 and 21. The contractor must ensure all installed detectors communicate with the fire panel and that all work adheres to NFPA standards and local Authority Having Jurisdiction requirements. Bids must be submitted via email to Tom Williams by 3:00 PM PST on September 18, 2026. To be considered, applicants must provide a completed bid sheet, proof of insurance, and a supplier packet containing a W-9, self-certification form, and acceptance of terms and conditions. This opportunity is open to various small business set-asides, including SDB, WOSB, HUBZone, and Veteran-Owned businesses, under NAICS code 238220. Award decisions will be based on the best value as determined by MTC. The contract mandates compliance with Service Contract Labor Standards and Wage Determination No. 2015-5595 Revision 28 for labor rates in Washoe and Storey counties. Additionally, subcontractors must provide a 12-digit Unique Entity ID and certify their debarment status under FAR 52.209-6 if the subcontract exceeds 30,000 dollars. Strict adherence to government and Department of Labor guidance regarding the protection of sensitive and proprietary information is required.

Sierra Nevada Job Corps Center

POSTED

about 10 hours ago

DEADLINE

2026-Clearfield-Bldg E8 Welding HVAC

Solicitation # 2026- Clearfield- Welding Bldg. E8 HVAC Replacement

Management & Training Corporation (MTC) is seeking fixed-price lump sum bids for a subcontracting opportunity to replace the 20hp motor connected to the rooftop HVAC system at the Clearfield Job Corps Center in Clearfield, Utah. The scope of work includes the complete removal and replacement of the existing motor, electrical hookup, system testing, commissioning, and the provision of onsite training and maintenance manuals for facility personnel. Bidders must conduct a physical site visit and sign the attendance roster to be eligible for award. The project requires the contractor to handle all permits, fees, and the removal of all construction debris and packaging from the site. Bids are due by September 19, 2026, at 3:00 PM MST and must be submitted via email to the designated points of contact. Submissions must include a signed MTC Bid for Lump Sum Contract form, a detailed cost breakout on company letterhead, and a bid bond guarantee from a surety company with at least an A- rating. This opportunity is set aside for various small business categories, including SDB, WOSB, HUBZone, and SDVOSB. Award decisions will be based on overall best value. The contract is subject to federal regulations, including the Davis-Bacon Act for prevailing wages in Davis County, Utah, and the Contract Work Hours and Safety Standards Act. Compliance with OSHA requirements and federal, state, and local codes is mandatory. Selected contractors must provide a 12-digit Unique Entity ID (UEI) and a 9-digit Tax ID via the MTC Supplier Self-Certification form. Payment will be processed through pay applications using AIA G702 and G703 forms based on a submitted Schedule of Values. Performance and payment bonds must be submitted within five business days of receiving an Intent to Award letter.

Management & Training Corporation

POSTED

about 10 hours ago

DEADLINE

CBP7664 Wellness HVAC Compressor Replacement

Solicitation # CBP7664

Management & Training Corporation is seeking bids for a subcontracting opportunity to replace a failed HVAC/refrigeration compressor at the Wellness facility of the Sierra Nevada Job Corps Center in Reno, Nevada. The project is structured in five phases: preparation and environmental safety, demolition and removal, installation of an OEM-specified compressor and related components, system testing and commissioning, and final closeout. The contractor must ensure full restoration of cooling capacity and operational efficiency while adhering to EPA Section 608 regulations for refrigerant recovery. The work must be completed within 30 consecutive business days following a written Notice to Proceed. Bids will be evaluated based on overall best value, considering price, quality, and delivery schedules. For bids equal to or greater than 25,000 dollars, a bid bond of 20 percent of the base bid is required, along with performance and payment bonds from an A-rated surety company. Submission requirements include a signed bid sheet, a detailed bid breakout, and verification of a physical site visit. Contractors must comply with Davis-Bacon Act wage determinations for Washoe County and provide self-certification of their business size and socioeconomic category per FAR 52.219-8. Final payment is contingent upon the submission of a Notice of Final Completion, certified payroll reports, and two sets of operation and maintenance manuals.

Sierra Nevada Job Corps Center

POSTED

about 10 hours ago

DEADLINE

Replace Shower Diverters in two (2) Dorms

Solicitation # replace-shower-diverters-two-2-dorms

This project involves the removal and replacement of shower diverters in eight bathrooms across two dormitories located in Indiana. The scope of work includes replacing existing Powers brand diverters with Delta or comparable models featuring readily available parts, as well as repairing or replacing any deteriorated piping leading into the diverters. The solicitation is open to various small business categories, including SDB, WOSB, HUBZone, and SDVOSB entities under NAICS code 238220. Proposals must be submitted via email to Tammy Swallows at Atterbury Job Corps by September 14, 2026, at 3:00 PM.

Adams & Associates

POSTED

about 10 hours ago

DEADLINE

This is a subcontracting opportunity to replace a chiller in McKinney, TX.

Solicitation # subcontracting-opportunity-replace-chiller-mckinney-tx

Serrato Corporation is seeking bids for a subcontracting opportunity to replace a failing 246-ton air-cooled chiller at the North Texas Job Corps Center, specifically in Building 214/215 located in McKinney, Texas. The scope of work includes the demolition and disposal of the existing unit and the installation and startup of a like-kind, similar model replacement. Additionally, the project requires the installation of a JACE 9000 central integration point for building automation controls to manage the chiller, pumps, boiler, and four multi-zone air handling units. The contractor must also perform cleaning and inspection of the air handling units, replace belts, install four 3-way control valves, and replace three of the four air handler VFDs. Bids must be submitted by September 18, 2026, and quotes must remain valid for 90 days. Required submission documentation includes manufacturer equipment specifications, Form 1413 for Davis-Bacon Act certified payroll compliance for work exceeding 2,000 dollars, and a Certificate of Liability Insurance naming Serrato Corporation as the holder. Insurance minimums include 1 million dollars for Commercial General Liability and Comprehensive Automobile Liability, and 500,000 dollars for Employers Liability. This opportunity is set aside for various small business categories, including SDB, WOSB, HUBZone, and SDVOSB. Primary points of contact for the project are Stacy Smith and Roy Henderson.

Serrato Corporation DBA North Texas Job Corps

POSTED

about 10 hours ago

DEADLINE

AAL-0880-02 HVAC and Electrical Upgrades Fairbanks

Solicitation # AAL-0880-02

Solicitation AAL-0880-02 involves HVAC and electrical upgrades at the Fairbanks FSS facility in Alaska. The scope of work includes the replacement of the chiller, four AC units, and chilled-water piping, along with associated electrical system upgrades. Key requirements include modifying Panel P1 and HVAC circuits and ensuring the provision of temporary and redundant cooling throughout the construction period to maintain operational continuity. The project concludes with startup, testing, commissioning, FAA training, punch-list completion, and final closeout. The estimated construction magnitude for this project is between 250,000 and 500,000 dollars, with a proposed start date of April 15, 2027. This opportunity is categorized under NAICS code 238220 and is set aside for various small business categories, including Small Disadvantaged Business, Women-Owned Small Business, HUBZone, and Veteran-Owned Small Business. The primary point of contact for this solicitation is Masanori Akers.

PTSI Managed Services Inc.

POSTED

about 10 hours ago

DEADLINE

Main Building 1 Wing 5 – Six Rooftop HVAC Unit Replacement – Glenmont Job Corps Center

Solicitation # S26-010

The Glenmont Job Corps Center is soliciting proposals from qualified, New York State licensed contractors for the replacement and installation of HVAC equipment within Main Building No. 1, Wing 5 (Education Building) in Glenmont, New York. The project involves replacing two 7.5-ton split-system units for the auditorium, one 6-ton rooftop unit for the library and computer lab, and one 12.5-ton rooftop unit for the north and east wing classrooms. Additionally, the scope includes installing four 2-ton ductless mini-split heat pump systems, removing a window air-conditioning unit, and abandoning two 5-ton rooftop units in place. Comprehensive associated work encompasses demolition, roof curbs and penetrations, ductwork, refrigerant and condensate piping, electrical work, controls, structural roof evaluations, and fire alarm and duct smoke detector installations, concluding with testing, balancing, and commissioning. This solicitation is set aside for various small business categories, including SDB, WOSB, HUBZone, and Veteran-Owned Small Businesses. The project must be completed within 210 calendar days following the written Notice to Proceed, and the facility will remain operational throughout the construction period. Key deadlines include a pre-proposal site walkthrough on September 10, 2026, with vendor questions due by September 14, 2026. Final proposals must be submitted by September 21, 2026, at 4:00 PM ET. All work must comply with applicable New York State codes, safety regulations, and environmental requirements.

Adams and Associates, Inc.

POSTED

about 10 hours ago

DEADLINE

Replace HVAC Systems in the following buildings on our campus –1.) 1091 – Glazing/Welding/Heavy Mechanics Bldg

Solicitation # 26-140

This project involves the replacement of a pad-mounted gas-fired packaged HVAC unit at the Glazing, Welding, and Heavy Mechanics Building (1091) in Indiana. The existing 10-ton Carrier unit, which utilizes R-22 refrigerant, will be replaced with a new 12.5 SEER packaged unit using non-R22 refrigerants such as R-410A or R-454B. The scope of work requires the reuse of existing ductwork, electrical disconnects, and thermostat wiring. Following installation, the old unit and any recovered refrigerant must be labeled and left at the maintenance building for parts and reuse. The solicitation is managed by Adams and Associates, Inc., with a response deadline of October 5, 2026. This opportunity is set aside for various small business categories, including Small Disadvantaged, Women-Owned, HUBZone, and Veteran-Owned businesses. Interested parties should contact Tammy Swallows for further information regarding this NAICS 238220 project.

Adams & Associates, Inc.

POSTED

about 10 hours ago

DEADLINE

Replace HVAC Systems in the following buildings on our campus –1.) ABL Dormitory

Solicitation # 26-141

Adams & Associates, Inc., operating for the U.S. Department of Labor, is soliciting a single lump sum contract to replace HVAC systems at the ABL Dormitory within the Atterbury Job Corps Center in Indiana. The project involves replacing existing R-22 Bryant gas-fired furnaces and condensing units with new 12.5 SEER packaged units utilizing non-R22 refrigerants such as R-410A or R-454B. The scope includes the installation of compatible coils and the reuse of existing electrical disconnects, ductwork, and thermostat wiring. All recovered refrigerant must be labeled and left on-site. Eligible bidders must be registered in SAM.gov with a valid Unique Entity ID and hold a valid Indiana Contractor's License. A mandatory site visit is scheduled for September 23, 2026, with final proposals due by October 5, 2026. Award decisions will be based on best value, evaluating price (60 points), quality (20 points), past performance (10 points), and schedule (10 points). The contractor must provide a sequenced construction schedule within 10 days of the Notice to Proceed and guarantee all workmanship for one year. Payment terms are Net 30, contingent upon the submission of certified payroll records, a completed SF 1413, and the release of liens. Compliance with EPA, OSHA, and Davis-Bacon Act wage determinations is required.

Adams & Associates, Inc.

POSTED

about 10 hours ago

DEADLINE

AAL-0810-01 Sitka (SIT) Flight Service Station (FSS) Fire Esc

Solicitation # AAL-0810-01

Solicitation AAL-0810-01 is a design-build construction project for the Sitka Flight Service Station in Sitka, Alaska. The primary objective is to design and construct an access stair platform serving the third floor of the facility. The comprehensive scope of work includes conducting a site survey, obtaining necessary permits, developing the final design, executing construction, performing inspections, completing the punch-list, and providing final as-built drawings. The project has an estimated construction magnitude between 250,000 and 500,000 dollars and is proposed to start on February 1, 2027. This opportunity is set aside for small businesses, including small disadvantaged businesses, women-owned small businesses, HUBZone small businesses, and veteran-owned or service-disabled veteran-owned small businesses. The solicitation was posted on September 11, 2026, with a response deadline of September 25, 2026, and falls under NAICS code 238220.

PTSI Managed Services Inc.

POSTED

about 10 hours ago

DEADLINE

More opportunities from Department Of Defense → Nuwc Division Newport

Same awarding agency

SCIF/SAPF Design & Acoustic Engineering

Engineering Services

POSTED

about 14 hours ago

DEADLINE

Secure Transport & Logistics

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 14 hours ago

DEADLINE

Modular Facility Manufacturing & Fabrication

Vitreous China Plumbing Fixture and China and Earthenware Bathroom Accessories Manufacturing

POSTED

about 14 hours ago

DEADLINE

Site Security & Access Control Services

Security Guards and Patrol Services

POSTED

about 14 hours ago

DEADLINE

Construction - NUWCDIVNPT - Consolidated Secure Facility

Solicitation # N6660426R0163

The Naval Undersea Warfare Center Division Newport is soliciting proposals for the design and construction of the B162 Consolidated Secure Facility, a high-security project requiring full compliance with stringent federal and defense standards. The requirement is a 100% Small Business Set-Aside under NAICS code 236220, with a size standard of $45 million, and small businesses must perform at least 50% of the work. Proposals must be submitted electronically by the revised deadline of July 31, 2026, with formal response due by August 12, 2026. The contract is structured as a Firm Fixed Price arrangement, covering a single job and one lot for construction submittals, with performance to begin within 10 days of award and complete within 365 days. The facility will be constructed at Naval Station Newport, Rhode Island, and must meet rigorous security, acoustic, and physical standards to achieve Sensitive Compartmented Information Facility (SCIF) and Special Access Program Facility (SAPF) accreditation. Offerors must provide detailed technical narratives on SCIF/SAPF design, site security during construction, a Construction Security Plan, preliminary conceptual drawings, and a project schedule, all organized into specified volumes with strict formatting, page limits, and PDF searchability requirements. Contractors must be registered in SAM.gov and possess the necessary roles to request controlled attachments, including the Conceptual Layout Plan, Area Site Plan, and Site Utility Plan, which are critical to proposal development. The solicitation mandates that offerors hold a facility clearance and safeguarding clearance as specified in the DD Form 254 at time of submission and secure Top Secret/SCI clearances for designated personnel within ten days of performance commencement. Key personnel—including a Project Manager with 7 years of federal construction experience and 5 years on ICD/ICS 705 facilities, and a Superintendent with 10 years of experience—must be identified with resumes and cannot be substituted without government approval. Compliance with CMMC for handling Controlled Unclassified Information, adherence to NAVSEA packaging prohibitions, use of Wide Area Workflow for all invoicing and payment submissions, and full disclosure of organizational conflicts of interest with mitigation plans are mandatory. The evaluation process uses a tradeoff analysis with a pass/fail gate for technical approach: proposals must achieve at least an “Acceptable” rating under Factor I to be eligible, and award will be based on best value, giving primary

Commercial and Institutional Building Construction

POSTED

about 14 hours ago

DEADLINE

Closure Protective Covers (CPCs)

Solicitation # N6660426Q0288

The Naval Undersea Warfare Center Division, Newport (NUWCDIVNPT) is soliciting bids for the procurement of Closure Protective Covers (CPCs) under solicitation N66604-26-Q-0288. This is a Firm Fixed Price contract with a maximum funding limitation of $197,000.00. While originally a small business set-aside, Amendment 0002 changed the status to full and open competition. The requirement is divided into three CLINs: a first article unit, production units, and the delivery of data per the Contract Data Requirements List. Award will be made on a Lowest Price Technically Acceptable (LPTA) basis to the vendor proposing the greatest quantity of production units within the $197,000.00 budget. To be considered technically acceptable, offerors must provide completed pricing tables and demonstrate cybersecurity compliance, including an active CMMC Level 2 (Self) or higher assessment and a NIST SP 800-171 DoD Assessment score posted in the Supplier Performance Risk System (SPRS). Access to export-controlled government drawings requires a valid Joint Certification Program (JCP) certification. Deliverables must be manufactured in accordance with drawing JCM-14865-001 and include a comprehensive Certificate of Compliance (CoC) documenting material validations and test results for all components. Shipping is FOB Destination to Newport, RI, and the government's preferred payment method is via Government Purchase Card.

Plate Work Manufacturing

POSTED

about 14 hours ago

DEADLINE

Atlantic Undersea Test and Evaluation Center (AUTEC) Pay and Benefit Study

Solicitation # N6660427Q0003

The Naval Undersea Warfare Center Division, Newport is seeking a contractor to conduct a Pay and Benefit study under a Firm Fixed Price purchase order. This study is a critical prerequisite for the upcoming Atlantic Undersea Test and Evaluation Center Maintenance and Operations follow-on contract, ensuring the government establishes fair and reasonable compensation packages for non-Bahamian personnel. This opportunity is designated as a 100 percent small business set-aside under NAICS code 541990, with a size standard of 19.5 million dollars. Interested parties must submit their responses by September 15, 2026, to the agency located in Newport, Rhode Island.

All Other Professional, Scientific, and Technical Services

POSTED

about 14 hours ago

DEADLINE

Aeration Blower and Silencer Vibration and Shock Fixture Fabrication

Solicitation # N6660426Q0459

Solicitation N66604-26-Q-0459 is a firm-fixed-price request for quotes from the Naval Undersea Warfare Center Division, Newport, for the fabrication and assembly of two specific test fixtures: one CHT Aeration Blower Fixture Assembly and one Discharge Silencer Fixture Assembly. The contractor is responsible for procuring materials, including copper-nickel piping, and performing welding and assembly to replicate a shipboard environment in accordance with Mil-DTL-901E and Mil-Std-167A. The work will be performed at the contractor's facility and at NUWCDIVNPT, where the contractor must provide on-site technical personnel to support government-executed fitment evaluations. Key deliverables include a Fabrication and Inspection Report due within five business days of assembly completion and a final Summary Report detailing fabrication and fitment testing. The desired delivery date for the assemblies is January 15, 2027, with delivery terms set as FOB Destination, Newport, RI. Award is based on the lowest price technically acceptable, with the government reviewing past performance via the Supplier Performance Risk System. Offerors must be registered in SAM, provide a CAGE code for drawing access, and achieve CMMC Level 2 (Self) certification prior to award. Quotes are due by September 11, 2026, and must include all shipping costs within the unit price.

Testing Laboratories and Services

POSTED

about 14 hours ago

DEADLINE

Supply of Specialized Antennas (PN: 07111000)

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

DEADLINE

Pre-Production and Production Testing for Igniter Assemblies

Testing Laboratories and Services

POSTED

DEADLINE

Precision Manufacturing of Igniter Assembly Components

POSTED

DEADLINE

Supply of Diamond SA Electronic Components

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS