Microscopes and Camera

This is a combined synopsis/solicitation for a commercial item prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written (formal) solicitation will not be issued. This solicitation is issued as solicitation number FA7000-15-T-0120 in accordance with FAR Parts 12 & 13. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-83, effective 3 Sep 2015. The North American Industry Classification System Code [NAICS] is 333314 and the business size standard of 500 employees. This is an unrestricted acquisition. All responsible sources may submit a quote, which if received timely, will be considered by the 10th Contracting Squadron, USAF Academy (USAFA). This is a Brand Name only requirement. The department currently operates 40 Leica EZ4 stereo microscopes and 134 Leica CME/DME microscopes in 6 biology courses. This specific brand and these models are the only products that will integrate with existing equipment and allow students to transition from course to course without having to learn a new microscopy system and wasting valuable class time. Parts from this brand and models are interchangeable with our existing equipment reducing the cost of repairs. This brand also seamlessly interfaces with Lieca imaging software used in class eliminating the need to switch between program in class. It is not in the best interest of the government to change all of our microscopes to a new brand or model. Extensive market research could NOT identify any other brand or company(s) that can provide the required the Leica product. Contact was made with a Leica Rep (Sep 2015) and they stated the exclusive authorized dealer for the Western US for the full line was NCI. Research was conducted to see if a different camera could be added to our existing Leica EZ4, CME, and DME microscopes. The Moticam X and Moticam 580 were tested in class. Both restrict viewing of the objective lens making student learning difficult. The 580 requires cost prohibitive infrastructure requirements since it is not wireless and the Moticam X while wireless did not work with our existing software. Olympus and Richter cameras were also reviewed however these required a trinocular port which our current equipment does not have. The government bares no legal liability for bid cost associated with this request for quote. Vendors should not submit a quote unless they are willing to absorb all cost associated with submitting a quote. Quotes submitted with used, reconditioned, refurbished, gray market, or liquidated stock will not be considered for award. This Solicitation is being issued in accordance with (IAW) FAR Parts 12 and 13 as a Request for Quote. IAW FAR 13.004, in all instances throughout this solicitation any use of the word "proposal" should be understood as "quote". All instances of the word "offeror" should be understood as "quoter". All instances of the word "award" should be understood as "order". Quotes supplied in response to this solicitation are not binding. The requirement will be awarded to the Quoter IAW 52.212-2, found herein. Please read and comply with all requirements for submitting a quote. Failure to comply with all instructions contained within this Synopsis/Solicitation could result in the quote being ineligible for award. It is the offerors responsibility to ensure their quote meets all the requirements identified herein. Quotes may be provided for the Agilent DM 750, ICC50W microscope cameras, and EZ4 W Stereo Microscopes as a brand name product or for a proposed "equal" piece of equipment fulfilling all the above specifications. If an offeror believes they have an equal product which meets all the features and functionality of the items listed below, they may submit a quote for that product. It will be evaluated for technical acceptability. If it is determined by the Government to be an equal product it will be evaluated along with all other technically acceptable offers. If it is determined by the Government not to be an equal product, the offer will not be considered for award. Buy American Act and certification of compliance is required and must be submitted with quote (see DFARS clause 252.225-7001). ITEM DESCRIPTION: The USAF Academy Biology Department has a Brand Name requirement for two (2) Leica Model DM750 compound microscopes with integrated wireless camera, twenty-two (22) Leica Model ICC50W integrated, microscope cameras, and nine (9) Leica Model EZ4 W stereo Microscopes. All of these should be capable of wireless broadcast of an HD image directly to a mobile device or projector. Item No. 0001 (2 Each) Leica Model DM750 compound microscopes to include the following characteristics: At minimum, we require the following: - 4-5 position nose piece with 4x, 10x, 40x, 100x (oil immersion) (all HI Plan objectives) - Disc Diaphragm with colored labels for matching objective magnifications - LED illumination with Automatic off capability - Built in handle and cord wrap - Manual 45 degree Binocular tube with locking mechanism for eyepieces - 10x/20 eyepiece w/eyeguard - 10x/20 focusing eyepiece w/eyeguard - USB power with integrated connector - Capable of bright-field and phase-contrast microscopy. - Integrated wireless camera must be compatible with Leica DM750, Leica CME, and Leica DME microscopes. These microscopes (n=134)are currently used in DFB's classrooms and research laboratories and will have Leica ICC50W cameras installed in each. The integrated camera needs to be compatible with Leica ICC50W camera software o Integrated camera must be able to wirelessly connect to mobile devices using Leica Apps and connect to a WiFi enabled PC using Leica Imaging software o Stream HD image directly to an HD display without a computer intermediate o Have a mini-USB2 and Mini0HDMI interface o Minimum of 3.1 Megapixel image capability o Wireless infrared remote for camera operation - Installation and training including hardware/software integration included - Must include a minimum one year warranty Item No. 0002 (22 Each) Leica Model ICC50W microscope cameras to include the following characteristics: At minimum, we require the following: - Integrated wireless camera must be compatible with Leica DM750, Leica CME, and Leica DME microscopes. These microscopes (n=134)are currently used in DFB's classrooms and research laboratories - The camera must be integrated fitting between the viewing tube and microscope stand. It should not be attached to the eyepiece or block use of the two eyepieces in any way. - Camera must be able to wirelessly connect to mobile devices using Leica Apps and connect to a WiFi enabled PC using the full range of Leica Imaging software - Stream HD image directly to an HD display without a computer intermediate - Have a mini-USB2 and Mini HDMI interface - Minimum of 5.0 Megapixel full frame image aquisition - Capture pictures directly onto an SD memory card with no computer intermediate. - Wireless infrared remote for camera operation - Installation and training including hardware/software integration included - Must include a minimum one year warranty Item No. 0002 (9 Each) Leica Model EZ4 W Stereo Microscopes to include the following characteristics: At minimum, we require the following: - Stereo microscope designed for viewing macro (zoological) dissections in a classroom environment - Minimum Magnification Range from 8x to 35x - Integrated 6500K Reflected, 4500K Transmitted, true daylight constant color temperature power LED illumination for both reflected and transmitted light - Variable light intensity control for both incident and transmitted light - 3 directional reflected illumination (fill, top, and oblique) - Automatic off feature for energy conservation after 120 minutes - Integrated wireless camera must be compatible with the full range of Leica Imaging software. Existing Leica classroom microscopes (n=134) are being upgraded with cameras which use Lieca imaging software and these stereo microscopes need to be compatible with that software so all microscopes can be connected to the same instructor interface during class. - The camera must be integrated into the stereo microscope. It should not be attached to the eyepiece top of an eyepiece or block use of the eyepieces in any way. - Camera must be able to wirelessly connect to mobile devices using Leica Apps and connect to a WiFi enabled PC using the full range of Leica Imaging software - Stream live HD image directly to an HD display without a computer intermediate - Include a USB2, HDMI, and ethernet interface - Minimum image size of 5.0 Megapixels - Capture pictures directly onto an SD memory card with no computer intermediate. - Wireless infrared remote for camera operation - Camera needs to be powered directly from the microscope - Installation and training including hardware/software integration included - Must include a minimum one year warranty Provide pricing for the following line item: Description Qty Unit Price Extended Price LINE ITEM 0001 Leica Model DM750 compound microscopes 2 Each $_______ $________ LINE ITEM 0002 Leica Model ICC50W microscope cameras 22 Each $_______ $________ LINE ITEM 0003 Leica Model EZ4 W Stereo Microscopes 9 Each $_______ $________ TOTAL PRICE FOR CLINS 0001 through 0003 $_________ The following Federal Acquisition Regulation (FAR) clauses apply to this combined synopsis/solicitation and offerors must comply with all instructions contained in FAR 52.212-1, Instructions to Offerors--Commercial Items, addenda applies: The contractor shall submit their quote on company letterhead to include the following: solicitation number, contact name, address, telephone number of the offeror, unit price, extended price, any discount terms, delivery terms, cage code, DUNS number, technical (descriptive/specification literature for Brand name), tax identification number, size of business, and standard warranty information. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer. Descriptive/Specification literature must contain adequate information to judge if products meet or exceed the characteristics supplied in the solicitation. Quotes and descriptive literature information must be received no later than 1:00 pm Mountain Daylight Time (MDT), 18 September 2015 at the 10 CONS/LGCB, 8110 Industrial Drive, Suite 200, USAF Academy, CO 80840-2315. Please submit quotes by e-mail to the attention of Melanie Caines, Contract Specialist at 719-333-0809 at email address melanie.caines@us.af.mil. In their absence, please contact Diana Myles-South, Contracting Officer at 719-333-8650 at email address diana.south@us.af.mil. Addenda to FAR 52.212-1, PROPOSAL PREPARATION INSTRUCTIONS: a. To assure timely and equitable evaluation of the proposal, the offeror must follow the instructions contained herein. Offerors are required to meet all solicitation requirements, including terms and conditions, representations and certifications, and technical requirements. Failure to meet a requirement may result in an offer being ineligible for award. Offerors must clearly identify any exception to the solicitation terms and conditions and provide complete accompanying rationale. The response shall consist of three (3) separate parts; Part I - Price, Part II- Technical Information - Brand Name Descriptive/Specification Literature, and Part III - Contract Documentation (Representation and Certification). b. The contracting officer has determined there is a high probability of adequate price competition in this acquisition. Upon examination of the initial offers, the contracting officer will review this determination and if, in the contracting officer's opinion, adequate price competition exists no additional cost information will be requested. However, if at any time during this competition the contracting officer determines that adequate price competition no longer exists; offerors may be required to submit information to the extent necessary for the contracting officer to determine the reasonableness and affordability of the price. c. Specific Instructions: 1. PART I - PRICE PROPOSAL - Submit on company letterhead the unit price for each line item to include extended price with an overall total price. Pricing must include unit price set up/installation and onsite training. 2. PART II - TECHNICAL/DESCRIPTIVE LITERATURE - Quoters must submit technical information (Brand Name Descriptive literature/specifications) that adequately demonstrates their quote meets the salient characteristics requirement in contract line item (CLIN 0001 through CLIN 0003) of this solicitation. A general statement of compliance or restatement of the salient characteristics is insufficient. The Contracting Officer is not responsible for locating or obtaining any information not identified in the quote and literature. If a vendor cannot comply with every requirement that quote will not be considered. 3. Part III - CONTRACT DOCUMENTATION (Representation and Certification). a. The provision at FAR 52.212-3, Offeror Representations and Certifications - Commercial Items (Mar 2015) and its Alternate I (Alt I) (Oct 2014) must be completed. Offerors are highly encouraged to complete all representations and certifications electronically online at: (http://orca.bpn.gov/publicsearch.aspx). If not completed online, 52.212-3 Alt I shall be completed in hard copy and submitted with quote, which this provision is included within this solicitation. Subject provisions are available at http://farsite.hill.af.mil. b. The provision at DFARS 252.209-7992, Representation by Corporations Regarding an Unpaid Delinquent Tax Liability or a Felony Conviction Under Federal Law-Fiscal Year 2015 Appropriations, Deviation 2015-O0005, (Dec 2014) must be completed and returned with quote, which this provision is included within this solicitation. c. The provision at DFARS 252-225-7000, Buy American - Balance of Payment Program Certificate - Basic (Nov 2014) must be completed and returned with quote, which this provision is included within this solicitation. d. Price quotes must be Firm-Fixed Price to include shipping and handling charges based on F.O.B. Destination. Quotes received with FOB: Other than Destination need provide the estimated shipping charges with their quote as a separate line item. Delivery is required no later than 11 weeks after receipt of order (ARO). e. The System for Award Management (SAM), contractors must be registered with SAM to conduct business with the Department of Defense. No purchase order can be awarded to any company without this registration (www.sam.gov). f. Provide a written statement that the offerors quote incorporates all amendments to the solicitation (if applicable). ADDRESS: HQ USAFA.DFB - F4BWB0 2355 Faculty Drive STE 2P389 USAF ACADEMY CO 80840-6226 TEL: 719-333-1589 The provision at FAR 52.212-2, Evaluation--Commercial Items apply to this acquisition: 52.212-2 Evaluation - Commercial Items (Oct 2014) a. The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: I. Meeting or exceeding salient characteristics of the Brand Name on a (Pass/Fail Basis) II. Price Paragraphs b and c are not applicable as shown below: b. Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s). c. A written notice of award or acceptance of an offer mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award. (End of provision) ADDENDUM TO 52.212-2 -- Evaluation -- Commercial Items (Oct 2014). BASIS FOR CONTRACT AWARD: This is a competitive acquisition in accordance with FAR Parts 12 and 13. The evaluation process will proceed as follows: 1. Price Evaluation. The Total Evaluated Price (TEP) will include the proposed unit price multiplied by the quantity for the one Contract Line Item Number (CLIN). The unit price of the offeror' s quote shall control any conflict between the unit price and the extended amount. The price evaluation will document the completeness, balance, and affordability (based on available government budget) of the quoted price. 2. Award will be made to the quote with the lowest evaluated price that meets or exceeds the salient characteristics on pass/fail basis of this Brand Name requirement as listed below: Item No. 0001 (2 Each) Leica Model DM750 compound microscopes to include the following characteristics: At minimum, we require the following: - 4-5 position nose piece with 4x, 10x, 40x, 100x (oil immersion) (all HI Plan objectives) - Disc Diaphragm with colored labels for matching objective magnifications - LED illumination with Automatic off capability - Built in handle and cord wrap - Manual 45 degree Binocular tube with locking mechanism for eyepieces - 10x/20 eyepiece w/eyeguard - 10x/20 focusing eyepiece w/eyeguard - USB power with integrated connector - Capable of bright-field and phase-contrast microscopy. - Integrated wireless camera must be compatible with Leica DM750, Leica CME, and Leica DME microscopes. These microscopes (n=134)are currently used in DFB's classrooms and research laboratories and will have Leica ICC50W cameras installed in each. The integrated camera needs to be compatible with Leica ICC50W camera software o Integrated camera must be able to wirelessly connect to mobile devices using Leica Apps and connect to a WiFi enabled PC using Leica Imaging software o Stream HD image directly to an HD display without a computer intermediate o Have a mini-USB2 and Mini0HDMI interface o Minimum of 3.1 Megapixel image capability o Wireless infrared remote for camera operation - Installation and training including hardware/software integration included - Must include a minimum one year warranty Item No. 0002 (22 Each) Leica Model ICC50W microscope cameras to include the following characteristics: At minimum, we require the following: - Integrated wireless camera must be compatible with Leica DM750, Leica CME, and Leica DME microscopes. These microscopes (n=134)are currently used in DFB's classrooms and research laboratories - The camera must be integrated fitting between the viewing tube and microscope stand. It should not be attached to the eyepiece or block use of the two eyepieces in any way. - Camera must be able to wirelessly connect to mobile devices using Leica Apps and connect to a WiFi enabled PC using the full range of Leica Imaging software - Stream HD image directly to an HD display without a computer intermediate - Have a mini-USB2 and Mini HDMI interface - Minimum of 5.0 Megapixel full frame image aquisition - Capture pictures directly onto an SD memory card with no computer intermediate. - Wireless infrared remote for camera operation - Installation and training including hardware/software integration included - Must include a minimum one year warranty Item No. 0002 (9 Each) Leica Model EZ4 W Stereo Microscopes to include the following characteristics: At minimum, we require the following: - Stereo microscope designed for viewing macro (zoological) dissections in a classroom environment - Minimum Magnification Range from 8x to 35x - Integrated 6500K Reflected, 4500K Transmitted, true daylight constant color temperature power LED illumination for both reflected and transmitted light - Variable light intensity control for both incident and transmitted light - 3 directional reflected illumination (fill, top, and oblique) - Automatic off feature for energy conservation after 120 minutes - Integrated wireless camera must be compatible with the full range of Leica Imaging software. Existing Leica classroom microscopes (n=134) are being upgraded with cameras which use Lieca imaging software and these stereo microscopes need to be compatible with that software so all microscopes can be connected to the same instructor interface during class. - The camera must be integrated into the stereo microscope. It should not be attached to the eyepiece top of an eyepiece or block use of the eyepieces in any way. - Camera must be able to wirelessly connect to mobile devices using Leica Apps and connect to a WiFi enabled PC using the full range of Leica Imaging software - Stream live HD image directly to an HD display without a computer intermediate - Include a USB2, HDMI, and ethernet interface - Minimum image size of 5.0 Megapixels - Capture pictures directly onto an SD memory card with no computer intermediate. - Wireless infrared remote for camera operation - Camera needs to be powered directly from the microscope - Installation and training including hardware/software integration included - Must include a minimum one year warranty Evaluation of quotes will be conducted using Simplified Acquisition Procedures in accordance with FAR Part 13.106. Award will be made to the quote with the lowest evaluated price that meets the Brand Name requirement on a pass/fail basis of the requirement. FAR 52.212-4, Contract Terms and Conditions-Commercial Items (May 2015) applies to this acquisition. ADDENDUM TO FAR 52.212-4(c) CHANGES Text in paragraph (c) is deleted and replaced with the following: Changes in terms and conditions of this contract may be made only by written agreement of the parties with the exception of certain changes such as administrative changes including changes in paying office, appropriation data, etc. authorized by the Federal Acquisition Regulation and its supplements that may be made unilaterally by the Contracting Officer (for a complete list of changes that may be made unilaterally, see FAR 43.103(b). (End of Addendum) 52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS-COMMERCIAL ITEMS (DEVIATION 2013-O0019) (May 2015) a) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (a) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records -- Negotiation. (1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract. (2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved. (3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law. (b) (1) Notwithstanding the requirements of any other clause in this contract, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (b)(1) in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause- (i) 52.203-13, Contractor Code of Business Ethics and Conduct (Apr 2010) (41 U.S.C. 3509). (ii) 52.219-8, Utilization of Small Business Concerns (Oct 2014) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $650,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities. (iii) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495). Flow down required in accordance with paragraph (1) of FAR clause 52.222-17. (iv) 52.222-21, Prohibition of Segregated Facilities (Apr 2015). (v) 52.222-26, Equal Opportunity (Mar 2007) (E.O. 11246). (vi) 52.222-35, Equal Opportunity for Veterans (Jul 2014) (38 U.S.C. 4212). (vii) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793). (viii) 52.222-37, Employment Reports on Veterans (Jul 2014) (38 U.S.C. 4212). (ix) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40. (x) 52.222-41, Service Contract Labor Standards (May 2014), (41 U.S.C. chapter 67). (xi) ___ (A) 52.222-50, Combating Trafficking in Persons (Mar 2015) (22 U.S.C. chapter 78 and E.O. 13627). ___ (B) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 E.O. 13627). (xii) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (May 2014) (41 U.S.C. chapter 67.) (xiii) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (May 2014) (41 U.S.C. chapter 67) (xiv) 52.222-54, Employment Eligibility Verification (Aug 2013). (xv) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2014) (E.O. 13658). (xvi) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Jul 2013) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note). (xvii) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (May 2014) (42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6. (xviii) 52.247-64, Preference for Privately-Owned U.S. Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64. (2) While not required, the contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations. (End of Clause)52.252-2 Clauses Incorporated by Reference (Feb 1998) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this address: http://farsite.hill.af.mil (End of Clause) Additional FAR clauses by reference cited in the clause applicable to this acquisition are: 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards (Jul 2013) 52.209-6 Protecting the Governments Interests When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (Aug 2013) 52.209-10 Prohibition on Contracting with Inverted Domestic Corporations (Dec 2014) 52.219-28 Post-Award Small Business Program Representation (Jul 2013) 52.222-3 Convict Labor (Jun 2003) 52.222-19 Child Labor -- Cooperation with Authorities and Remedies (Jan 2014) 52.222-21 Prohibition of Segregated Facilities (Apr 2015) 52.222-26 Equal Opportunity (Apr 2015) 52.222-36 Equal Opportunity for Workers w/Disabilities (Jul 2014) 52.222-50 Combat Trafficking in Persons (Mar 2015) 52.223-18 Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011) 52.225-13 Restrictions on Certain Foreign Purchases (Jun 2008) 52.232-33 Payment by Electronic Funds Transfer--Central Contractor Registration (Jul 2013) 52.232-40 Providing Accelerated Payments to Small Business Contractors (Dec 2013) 52.233-3 Protest After Award (Aug 1996) 52.233-4 Applicable Law for Breach of Contract Claim (Oct 2004) Additional DFARS clauses cited in the clause applicable to this acquisition are: 252.203-7000 Requirements Relating to Compensation of Former DoD Officials (Sep 2011) 252.204-7012 Safeguarding of Unclassified Controlled Technical Information (Nov 2013) 252.204-7015 Disclosure of Information to litigation Support Contractors (Feb 2014) 252.225-7001 Buy American and Balance of Payments Program - Basic (Nov 2014) 252.225-7002 Qualifying Country Sources as Subcontractors (Dec 2012) 252.225-7013 Duty Free Entry (Nov 2014) 252.232-7003 Electronic Submission of Payment Requests and Receiving (Jun 2012) 252.232-7010 Levies on Contract Payments (Dec 2006) 252.244-7000 Subcontracts for Commercial Items (Jun 2013) 252.211-7003 ITEM UNIQUE IDENTIFICATION AND VALUATION (Dec 2013) (a) Definitions. As used in this clause-- Automatic identification device means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media. Concatenated unique item identifier means-- (1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or (2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number. Data Matrix means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022. Data qualifier means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows. DoD recognized unique identification equivalent means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html. DoD item unique identification means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the e...