This Solicitation opportunity from Department Of Transportation was posted on May 21, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Mobile Concrete Technology Center (MCTC) Program

Closed

693JJ325R000015Federal

Submission Closed06/03/2025, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380

New

SLED

RFB 2027-2029 Magnetic Rope Testing at Cannon Mountain

Solicitation # RFB 2027-2029 Magnetic Rope Testing at Cannon Mountain

The New Hampshire Department of Natural and Cultural Resources is seeking a vendor to provide non-destructive electromagnetic wire rope testing and inspection services at the Cannon Mountain Aerial Tramway and Ski Area for the 2027 through 2029 period. The scope of work includes testing four 51mm track cables, the 36mm upper haul rope, the 32mm lower haul rope for the Aerial Tramway, and the complete length of the 38mm Peabody Express detachable lift haul rope. The selected contractor must provide all necessary labor, equipment, and instrumentation to identify wire breaks, loss of metallic area, or other anomalies, delivering detailed written inspection reports and recommendations for corrective action. The contract will be awarded to the compliant vendor offering the lowest total cost. Bids must be submitted by November 16, 2026, and must be signed and notarized. Eligible vendors must be registered with the NH Bureau of Purchase and Property and, if applicable, be in good standing with the NH Secretary of State. Required insurance includes comprehensive general liability of at least 1,000,000 dollars per occurrence and 2,000,000 dollars aggregate, along with workers compensation. Performance is scheduled between 7:00 A.M. and 4:00 P.M., requiring ten days advance notice for scheduling. Invoices are to be submitted monthly, with payment issued within 30 days upon the state's satisfaction and acceptance of the work.

Department Of Natural & Cultural Resources

POSTED

DEADLINE

NDT and Quality Inspection ServicesThis subcontract for NDT and Quality Inspection Services supports prime contractors on DLA Aviation fuel valve projects for the Department of Defense. The scope of work involves performing critical quality assurance and non-destructive testing, specifically utilizing Fluorescent Penetrant Inspection, Magnetic Particle Inspection, and hydrostatic pressure testing. All work must be conducted using calibrated equipment by certified NDT technicians to ensure technical compliance. The selected provider is responsible for delivering detailed inspection reports and certifications of conformance. This opportunity is categorized under NAICS code 541380 and is associated with DLA Aviation in Oklahoma City. The response deadline for this requirement is November 21, 2026.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

Specialized Inspection and Testing ServicesThe Specialized Inspection and Testing Services subcontract involves providing independent quality assurance and non-destructive testing for prime contractors on Department of the Navy projects. The scope of work focuses on conducting visual inspections of weld joints according to MIL-STD-2035 and performing dimensional inspections per DI-MDTI-808089B utilizing precision measuring instruments and CMM. Qualified providers must hold Certified Weld Inspector credentials to deliver essential documentation, including conformance inspections, final assembly dimensional reports, and weld joint visual inspection reports. This opportunity is managed by the Navsup Weapon Systems Support Mech under the Department of Defense, with a response deadline set for December 23, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Calibration and Certification Services for Pneumatic Test SetThis subcontract for the Department of Defense involves providing calibration and certification services for pneumatic test sets supporting Navsup Weapon Systems Support projects. The selected contractor will be responsible for the final testing, inspection, and precision calibration of gauges, valves, and sensors. All work must be performed using NIST-traceable standards and precision pressure testing equipment in strict accordance with ANSI/NCSL Z540.3 or ISO-10012-1 standards. The primary deliverables for this engagement include the provision of detailed calibration certificates and a certified Ready For Issue inspection report. This opportunity falls under NAICS code 541380, with a response deadline set for November 23, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

First Article Testing (FAT) & Validation ServicesThis subcontract for First Article Testing (FAT) and Validation Services supports prime contractors on Army Contracting Command Detroit Arsenal projects. The scope of work involves performing independent testing and validation, specifically focusing on airflow, vibration, noise, and stress testing, as well as dimensional inspections against the Technical Data Package. To execute these tasks, the contractor will utilize specialized equipment including wind tunnels, vibration tables, and precision Coordinate Measuring Machines. The selected provider must hold ISO/IEC 17025 accreditation and DD 2345 certification to ensure technical compliance. Key deliverables for this engagement include the submission of a First Article Test Report and a formal certification of compliance. This opportunity is categorized under NAICS code 541380 and is managed through the Department of Defense.

POSTED

DEADLINE

NDT and Mechanical Testing for Special Emphasis FastenersThis subcontract involves providing non-destructive and destructive mechanical testing for special emphasis fasteners on behalf of prime contractors for Navsup Weapon Systems Support Mech shipboard projects. The scope of work includes performing liquid penetrant inspections and wedge tensile testing in strict accordance with T9074 AS-GIB-010/271, MIL-DTL-1222, and ASTM-F606 standards. To qualify, the contractor must maintain ISO/IEC 17025 accreditation and utilize ISO 10012 calibrated tools. Deliverables for this engagement consist of certified test reports and certification data submitted via DD Form 1423. The opportunity is categorized under NAICS code 541380 and is managed by the Department of Defense.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

CSI Certification and Data Reporting ServicesThis subcontract for CSI Certification and Data Reporting Services involves providing specialized inspection and certification for prime contractors working on US Navy Critical Safety Item projects. The scope of work requires the verification of critical characteristics according to the Technical Data Package and the application of DI-MISC-80678 data requirements. The selected provider is responsible for preparing Certification and Data Reports and submitting all necessary information through the Electronic Contractor Data Submission system using PKI Digital Certificates. Final deliverables include a validated Certificate of Compliance and a completed Certified Data Report. This effort is managed under the Department of Defense via the Navsup Weapon Systems Support Mech.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

First Article Testing and Validation (Nuclear C Seal)This subcontract for the Department of Defense and Navsup Weapon Systems Support Mech involves the first article testing and validation of nuclear C seals. The selected contractor will perform both destructive and non-destructive testing to verify that material properties and dimensional accuracy align with TDP Version 002 and IRPOD requirements. All work must be conducted using certified NDE tools and adhere strictly to MIL-I-45208 quality standards. The primary objective of the contract is to produce certified test reports and supporting data necessary for the submission of DD Form 1423. This opportunity falls under NAICS code 541380, with a response deadline set for November 23, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Countermeasure Receiver RFI Testing and CertificationThis subcontract for Navsup Weapon Systems Support involves providing final performance testing and inspection services for prime contractors. The scope of work focuses on the RFI certification of Countermeasure Receivers, utilizing calibrated measurement tools and specialized test tooling. Additionally, the contractor is responsible for conducting dimensional readings in accordance with 46 CFR 51 and creating sequential process diagrams. To be eligible, the contractor must hold ISO 9001 or SAE AS9100 certification. The primary deliverables for this engagement are the RFI Certification and a Final Inspection Report. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense.

Navsup Weapon Systems Support

POSTED

DEADLINE

NDT and Hydrostatic Testing Services for Level I ComponentsThis subcontract involves providing independent non-destructive testing and hydrostatic pressure testing for shipboard valve projects supporting the Department of Defense via NAVSUP Weapon Systems Support Mechanicsburg. The selected provider will perform ultrasonic, X-ray, or dye penetrant inspections along with pressure chamber testing to certify Special Emphasis Level I integrity. Key deliverables include the provision of certified test reports and formal compliance certifications. To be eligible, the contractor must hold ISO/IEC 17025 and ISO 10012 accreditations and maintain a Confidential security clearance. The opportunity falls under NAICS code 541380, with a response deadline set for November 23, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Non-Destructive Testing (NDT) ServicesThis subcontract for Non-Destructive Testing (NDT) Services involves providing specialized hull and structural inspections for prime contractors working on USCG vessel projects. The scope of work focuses on conducting ultrasonic thickness measurements and side-scan ultrasonic testing of hull plating to ensure structural integrity. The selected provider will be responsible for delivering comprehensive thickness measurement data and detailed inspection reports. Managed by the Department of Homeland Security under agency CG-SEA-C21, the work is designated for performance in Santa Barbara, California. The opportunity falls under NAICS code 541380, with a response deadline set for November 16, 2026.

POSTED

DEADLINE

Aviation Component Testing and Inspection ServicesThe Aviation Component Testing and Inspection Services subcontract involves providing specialized testing and inspection for prime contractors on NAVSUP WSS aviation projects. The primary objective is to certify assemblies as Ready for Issue through rigorous fatigue, crack, and wear inspections. These tasks are performed using specialized aviation test benches and non-destructive testing equipment, including X-ray, ultrasonic, and magnetic particle inspection. To qualify, service providers must adhere to DoD-approved inspection standards or maintain NADCAP certification. The successful contractor is responsible for delivering comprehensive inspection and test reports along with the final RFI certification. This opportunity is categorized under NAICS code 541380 and is associated with the Department of Defense.

Navsup Weapon Systems Support

POSTED

about 7 hours ago

DEADLINE

in about 1 month

AI Contract Overview

This contract aims to provide comprehensive technical assistance to the concrete pavements community, focusing on advancing technologies, test procedures, and quality initiatives to enhance the durability and longevity of concrete pavements. The program offers stakeholders support through technical guidance, equipment loans, and training materials to aid in the design, production, and construction of more durable concrete pavements. Additionally, it supports the implementation of the Pavement Evaluation Methodology (PEM) and AASHTO R101 standards by facilitating data sharing and coordinating the adoption of emerging testing procedures. An amendment has been issued to include a revised Request for Proposal (RFP), updated attachment, and responses to stakeholder questions, ensuring clarity and alignment with program objectives. The contract is managed by the Department of Transportation’s Office of Acquisition and Grants Management and is set aside under the 8(a) small business program, emphasizing opportunities for qualified small businesses. It is posted under solicitation number 693JJ325R000015, with a response deadline of June 3, 2025. The work will be performed primarily in Washington, D.C., and the contract aims to foster collaboration among industry stakeholders, government agencies, and technical experts to improve concrete pavement practices nationwide. Key points of contact include Marcus Fowler and Robert P. Brown, who can be reached via email for further information.

General Info

Supports concrete pavement improvements via technical assistance, equipment loans, training, and innovative testing.

Agency

Department Of Transportation → 693JJ3 Acquisition And Grants Mgt

Contract Value

$5,069,574.13

NAICS

541380 - Testing Laboratories and Services

Place of Performance

Washington, DC, 20590, USA

Set-Aside

Awardee

BRICK AND BYTE INC.

Award Issued Date

09/01/2025, 12:00:00 AM UTC

Documents

Amendment 001 - J.2 Schedule of Rates

3 pages · amendment

High

J.2 Schedule of Rates

2 pages · bid-schedule

High

MCTC Support Services Solicitation 693JJ325R000015

rfp

High

RFP 693JJ325R000015 Q&A - Amendment 1

q-and-a

High

Solicitation 693JJ325R000015 - Mobile Concrete Technology Center (MCTC) Program

rfq

High

Technical Exhibit J.1 - Labor Category Descriptions (MCTC 2025)

5 pages · specifications

High

MCTC Equipment Inventory

specifications

Low

Q&A Template - RFP 693JJ325R000015 (MCTC Program)

2 pages · q-and-a

Low

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update

PhaseClosed

PostedMay 1

Solicitation

Notice updatedMay 21

The notice description changed.

Response DeadlineJun 3

Deadline has passed

Submission Closed

06/03/2025, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Transportation → 693JJ3 Acquisition And Grants Mgt

Contacts2 people available

OfficeWASHINGTON, DC, 20590, USA

Organization / AgencyDepartment Of Transportation → 693JJ3 Acquisition And Grants Mgt

Office AddressWASHINGTON, DC, 20590, USA

Contacts

Marcus Fowler

contact@example.gov

Robert P. Brown

contact@example.gov

Full Description

The objective of this contract is to provide technical assistance to the concrete pavements community on various technologies, test procedures, and quality initiatives. The Program is to focus on assisting stakeholders with initiatives by providing technical assistance, guidance, equipment loans, and training materials to design, produce, and construct longer lasting concrete pavements. The MCTC Program also supports the implementation of PEM and AASHTO R101 by coordinating and sharing data with stakeholders and facilitating the implementation of emerging test procedures. Amendment 001 is issued to attach a revised RFP, a revised Attachment J.2, and the Government's responses to questions recevied.