Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Naval Vessel Structural Repair & Welding Services

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves performing critical structural steel repair, hull maintenance, and welding operations on nuclear-powered aircraft carrier components, requiring specialized expertise in handling high-strength naval alloys. Tasks include precision cutting, shaping, and joining of materials essential to the integrity and operational readiness of naval vessels, with work conducted under strict safety and quality standards due to the sensitive nature of nuclear propulsion systems. All activities must comply with rigorous military specifications and protocols for defense infrastructure maintenance. This subcontract is issued under the NAICS code 336612 for Ship and Boat Building and Repair, managed by the Naval Supply Systems Command Fleet Logistics Center Yokosuka on behalf of the Department of Defense. The work is to be performed at an unspecified location, with no set-aside provisions or designated point of contact provided. The solicitation was posted on July 27, 2026, and interested parties must access the full details through the official SAM government portal to determine eligibility and compliance requirements.

General Info

Repair and welding of nuclear carrier steel components under strict military specifications.

Agency

Department Of Defense → Navsup Flt Logistics Ctr Yokosuka

NAICS

336612 - Boat Building

Place of Performance

N/A, AP, JPN

Set-Aside

NONE

Documents

This scope was carved out of N6264921D0006.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

FDNF-Japan CVN Repair, Maintenance, Modernization, and Overhaul - CEILING INCREASE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJul 27

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Flt Logistics Ctr Yokosuka

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Navsup Flt Logistics Ctr Yokosuka

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform structural steel repair, hull maintenance, and welding on nuclear-powered aircraft carrier components, including cutting, shaping, and joining of high-strength naval alloys.

Similar Contracts

Same NAICS industry code

Supplier of Marine Navigational Lights (NSN 6220016289651)This subcontract involves the procurement or manufacture of 85 units of Marine Navigational Lights meeting NSN 6220016289651 specifications. The supplier will support prime contractors delivering on DLA Troop Support Construction and Equipment contracts, with final delivery of the packaged and marked hardware to the DDSP New Cumberland facility. All deliverables must strictly adhere to packaging and marking standards MIL-STD-2073-1E, MIL-STD-129, and RP001. Additionally, the contractor is required to maintain full compliance with the Buy American Act and the Berry Amendment. The opportunity is categorized under NAICS code 336612 and is managed through the Department of Defense.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 9 hours ago

DEADLINE

O-Ring Component Supplier (NSN 5331-01-687-3913)This subcontract, managed by the Department of Defense under the DLA Weapons Support Land Supply Chain, requires the sourcing and manufacture of O-rings meeting NSN 5331-01-687-3913 specifications. These components are intended for prime contractors delivering naval spare parts to the USS COOPERSTOWN LCS 23. To ensure quality and longevity, the contractor must package the items in medium-duty, waterproof, greaseproof, and opaque bags designed to prevent UV deterioration, with each package containing two O-rings. Eligible suppliers must maintain an active SAM registration and strictly adhere to all NSN standards. The performance of this contract is located at FPO 34085 under NAICS code 336612. Interested parties must submit their responses by the deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

Supply of Water Closets (NSN 4510015608924)This subcontract, issued by the Department of Defense for the DDSP New Cumberland Facility, requires the procurement and delivery of five water closets meeting NSN 4510015608924 specifications. The selected provider must ensure all units are packaged according to RP001 DLA Packaging Requirements for Procurement and delivered to the designated government location in New Cumberland, Pennsylvania, following DIBBS system requirements. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 336612. Interested parties must adhere to the response deadline of November 9, 2026, to provide the necessary supplies for prime contractors supporting DLA Troop Support contracts.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 9 hours ago

DEADLINE

Solicitation # SPE7M4-27-T-1946

Solicitation SPE7M4-27-T-1946 is a small business set-aside fixed-price contract issued by the DLA Weapons Support Fluid Handling Division for the procurement of one marine hatch, identified by NSN 2040-01-655-3226. The required delivery date is October 23, 2026, with a delivery window of 10 days after receipt of order. The item is to be shipped to the 0553 CS BN CO A Composite AWCF SSF at Fort Hood, Texas. Inspection and acceptance will take place at the destination. The contractor must adhere to strict packaging and marking standards, including ASTM D3951, MIL-STD-129, and DLA packaging requirements RP001. Environmental compliance is mandatory, specifically the prohibition of Class I ozone-depleting chemicals. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses regarding cybersecurity, the Buy American Act, and the prohibition of covered defense telecommunications equipment. Quotations for this requirement were due by November 9, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 9 hours ago

DEADLINE

DOG, DOOR, MARINE

Solicitation # SPE7M4-27-T-1957

Solicitation SPE7M4-27-T-1957 is a small business set-aside issued by the DLA Weapons Support Fluid Handling Division for the procurement of one marine door dog, identified by NSN 2040-01-649-3701 and part number 124-7386935 (53711) PC 51. The requirement specifies a delivery lead time of 20 days after order, with the destination for inspection and acceptance being the USS Ronald Reagan CVN 76 in FPO AP 96616. The award may be processed via automated award, and a price evaluation preference is provided for HUBZone small business concerns. The contractor must adhere to strict quality and security standards, including a manufacturer inspection system compliant with SAE AS9003 or ISO 9001. The use of additive manufacturing is prohibited unless specifically authorized. Security requirements include CMMC Level 2 certification and compliance with DFARS 252.204-7012 for safeguarding covered defense information. Additionally, the item is subject to export controls under ITAR or EAR, requiring the contractor to have an approved US/Canada Joint Certification Program certification. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, and all invoicing must be processed through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 9 hours ago

DEADLINE

Manufacture of Cable Assembly AB and Cable TC9007-2This subcontract through the Department of Defense and DLA Mechanicsburg involves the manufacture of custom cable assemblies for prime contractors supporting Naval Surface Warfare Center projects. The scope of work specifically requires the fabrication of Cable Assembly AB and Cable TC9007-2 in strict accordance with drawings 8290958 and 8290586 under CAGE 53711. The contractor must maintain rigorous compliance with Department of Defense item unique identification reporting and DODISS standards. Additionally, the provider must demonstrate the capability to manage NOFORN specifications via DD Form 1425 to ensure the secure handling of sensitive information throughout the delivery of the completed assemblies.

SPRMM1 DLA Mechanicsburg

POSTED

about 14 hours ago

DEADLINE

in about 1 month

Manufacture and Supply of Check Valves (NIIN 016579547)This subcontract involves the manufacture and supply of 18 check valves (NIIN 016579547) for prime contractors supporting U.S. Navy NAVSUP projects. The contractor is responsible for fabricating the units according to Cage Code 34228 design 8590952-D1217483 and Technical Data Package Version 005, utilizing precision machining to ensure all specific tolerances are met. The agreement requires strict adherence to regulatory standards, including Buy American compliance and the provision of MSDS documentation per OSHA and FED STD 313. Additionally, the contractor must obtain source approval as outlined in the NAVSUP Philadelphia brochure. This project is managed under the Department of Defense via the Navsup Weapon Systems Support Mech agency.

Navsup Weapon Systems Support Mech

POSTED

about 14 hours ago

DEADLINE

TORQUE ASSIST ASSEM

Solicitation # N0010426QYA3Y

Solicitation NO0104-26-Q-YA3Y is a fixed-price requirement issued by NAVSUP Weapon Systems Support Mech for the teardown, evaluation, repair, and potential modification of the Torque Assist Assembly (NSN 7HH 2040-01-088-4976). The project is tied to the FY26 S&OP project with a planned award in FY27. The government intends to make a single award based on a trade-off where past performance is considered more important than price. Evaluation of past performance will utilize the DoD Supplier Performance Risk System (SPRS) color ratings. The contractor must adhere to strict quality and technical standards, including MIL-STD-130 for marking, MIL-STD-2073 for packaging, and ANSI/ESD S20.20 for electrostatic discharge control. A critical requirement is the total absence of metallic mercury in the supplied materials. Performance is measured by the Repair Turnaround Time (RTAT), calculated from the physical receipt of the asset in the Commercial Asset Visibility (CAV) system to the date of government acceptance. Government Source Inspection (GSI) is required, and all freight is handled as FOB Origin. Invoicing and receiving reports must be processed electronically through the Wide Area Workflow (WAWF) system. The extended deadline for quote submission is December 4, 2026, at 4:30 PM local time.

Navsup Weapon Systems Support Mech

POSTED

about 14 hours ago

DEADLINE

in about 1 month

SEGMENT #7 STERN

Solicitation # N0010427QLA16

Solicitation N00104-27-Q-LA16 is a Request for Quotation issued by NAVSUP Weapon Systems Support Mechanicsburg for the manufacture and delivery of one Segment #7 Stern (NSN 1940-01-676-6351). The item must be produced according to design reference Cage Code 66618 and comply with physical identification standards per MIL-STD-130. Delivery is required within 30 days of award, with freight established as FOB Origin and delivery to the DLA Distribution New Cumberland facility in Pennsylvania. Government source inspection is mandatory, and both inspection and acceptance will occur at the point of origin. The government will utilize a trade-off process for award, prioritizing past performance over price. Offerors must be authorized distributors of the original manufacturer to be considered. Technical requirements include strict adherence to MIL-STD-2073 for packaging and MIL-STD-129 for marking. All invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system. The solicitation also incorporates various federal regulations, including Buy American and Balance of Payments programs, and requires compliance with DFARS safeguarding of covered defense information.

Navsup Weapon Systems Support Mech

POSTED

about 14 hours ago

DEADLINE

Solicitation # N0010426QYAJZ

Solicitation N00104-26-Q-YAJZ is a competitive, fixed-price procurement for the manufacture of Gland Actuators (NSN 2040-01-093-7730) for use on Navy submarines. The requirement is for three units and will be awarded to the eligible, responsible offeror with the lowest price technically acceptable (LPTA) quote, though the government may consider past performance as a higher priority than price during evaluation. The acquisition falls under NAICS code 336612 with a small business size standard of 1,000. Technical requirements specify that the actuators must be manufactured from Nickel-Aluminum-Bronze per ASTM B150/B150M and adhere to drawing 4398602. Strict quality assurance is mandated, including a mandatory first article testing and inspection process that requires government approval before production begins. The contractor must maintain a quality system compliant with MIL-I-45208 or ISO 9001 and provide extensive objective quality evidence, including certified mill certifications and mercury exclusion certifications, as the materials must be entirely free of metallic mercury. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and receiving reports. Packaging and marking must comply with MIL-STD-2073-1 and MIL-STD-129, with specific palletization standards for domestic and overseas shipments. The contract incorporates various FAR and DFARS clauses regarding Buy American preferences, cybersecurity safeguarding, and prohibitions on certain foreign telecommunications equipment. Final inspection and acceptance will occur at the origin via the cognizant DCMA-QAR.

Navsup Weapon Systems Support Mech

POSTED

about 14 hours ago

DEADLINE

USCG Response Boat Small Third Generation (RB-S III)

Solicitation # 70Z02326R93250001

The United States Coast Guard is soliciting proposals for the Response Boat Small Third Generation (RB-S III) program to recapitalize its aging fleet of 29-foot RB-S II platforms. This total small business set-aside acquisition is a commercial Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract utilizing a combination of Firm-Fixed-Price and Fixed Price with Economic Price Adjustment CLINs. The scope includes the design, production, testing, and delivery of up to 410 boats and associated purpose-built trailers, along with logistics support, technical documentation, and crew familiarization. The anticipated ordering period is ten years, consisting of a two-year base period and an eight-year option period. The procurement employs a two-phase competitive down-select process. In Phase I, the government will evaluate written proposals based on mission effectiveness, production and management, and price to select up to four IDIQ contractors. Each selected offeror will receive an initial delivery order to build one demonstrator boat and trailer. In Phase II, these contractors will participate in a 90-day in-water demonstration to evaluate performance. Following this independent evaluation, one contractor will be selected to receive all subsequent production delivery orders. Phase I proposals are due by 1400 Eastern Time on November 13, 2026, and must be submitted electronically via the DoD Secure Access File Exchange.

POSTED

about 14 hours ago

DEADLINE

Galvanized Boat TrailerThis subcontract opportunity, managed by DAS Procurement for the State of Connecticut, involves the fabrication and delivery of a specialized galvanized steel tandem axle trailer. The equipment is specifically designed to support electrofishing vessels used in CT DEEP Fisheries Division projects, requiring precise weight and capacity specifications, the installation of rollers, and the integration of waterproof LED lighting within waterproof housings. The project falls under NAICS code 336612 and is intended for prime contractors operating on these division projects. Interested parties must submit their responses by the deadline of November 12, 2026, to provide the completed trailer as specified in the contract requirements.

DAS Procurement

POSTED

about 14 hours ago

DEADLINE

More opportunities from Department Of Defense → Navsup Flt Logistics Ctr Yokosuka

Same awarding agency

Marine Security and Access ControlThe Marine Security and Access Control subcontract, managed under the Department of Defense through the Navsup Fleet Logistics Center Yokosuka, focuses on providing essential security personnel and access control management for prime contractors. Operating in Subic Bay, Philippines, the scope of work involves managing ship security and regulating contractor access to ensure strict compliance with established ship security protocols. Key deliverables include the implementation of identification systems and the maintenance of detailed access control logs to ensure secure site management. This effort falls under NAICS code 561612, with a response deadline set for November 9, 2026.

Security Guards and Patrol Services

POSTED

DEADLINE

Shipboard Quality Assurance and Testing ServicesThe Shipboard Quality Assurance and Testing Services subcontract involves providing independent testing and quality assurance for prime contractors on Military Sealift Command projects. Based in Subic Bay, Philippines, and managed under the Department of Defense via the Navsup Fleet Logistics Center Yokosuka, the selected provider will execute government-provided test procedures and perform quality assurance inspections on electrical and structural work. These tasks require the use of precision measurement tools and non-destructive testing equipment in strict compliance with TARS-SWI-Testing and Quality Assurance standards. The scope of work culminates in the delivery of essential verification documents, including test certificates and quality assurance reports. This opportunity falls under NAICS code 541380, with a response deadline set for November 9, 2026.

Testing Laboratories and Services

POSTED

DEADLINE

Electric Motor Rewinding and RepairThis subcontract for Electric Motor Rewinding and Repair supports prime contractors on Military Sealift Command projects through the Navsup Fleet Logistics Center Yokosuka. The scope of work involves the precision rewinding and refurbishment of shipboard electric motors and controllers, specifically focusing on spare LPAC motors, IC Gyro fan motors, degaussing cabinet fan motors, and ASW motor controllers. All work must be performed in strict adherence to TARS-SWI-Electrical Safety Procedures to ensure the delivery of fully functional and tested equipment. The project is categorized under NAICS code 811212 and will be executed in Subic Bay, Philippines. Interested parties should note the response deadline of November 9, 2026, for this Department of Defense requirement.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Hull and Structural Repair ServicesThis subcontract for Hull and Structural Repair Services involves performing critical structural repairs, welding, and equipment overhauls for the USNS SALVOR in Subic Bay, Philippines. The scope of work includes rebuilding jettison fuel racks, overhauling and painting hawser reels, and repairing main bilge suction and forepeak reach rods. All activities must be executed in strict compliance with COMSC Instruction 4700.16 Series to ensure the delivery of certified structural components and fully functional deck equipment. Managed by the Department of Defense through the Navsup Fleet Logistics Center Yokosuka, the project falls under NAICS code 488111. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026. The selected subcontractor will support prime contractors in maintaining Military Sealift Command assets within the specified overseas location.

Air Traffic Control

POSTED

DEADLINE

USNS SALVOR (T-ARS 52) VOYAGE REPAIR AVAILABILITY (VRA)

Solicitation # N6264927QL003

Solicitation N6264927QL003, issued by NAVSUP Fleet Logistics Center Yokosuka Site Singapore, seeks a contractor to perform a Voyage Repair Availability (VRA) for the USNS SALVOR (T-ARS 52). The project is located in Subic Bay, Philippines, with a period of performance from December 7, 2026, to December 20, 2026. The scope of work encompasses all management, engineering, procurement, and shipyard production resources necessary to execute alterations, repairs, and routine maintenance in accordance with Military Sealift Command specification SSU SN 27-021 and COMSC Instruction 4700.16 Series. This is a Firm-Fixed-Price contract and is not a small business set-aside. Award will be granted to the responsible offeror who is technically acceptable and provides the lowest evaluated price. Interested contractors must maintain an active registration in the System for Award Management (SAM) and submit a proposal including a signed SF 18, a price breakdown via Attachment J-2, and IRS Form W-14. Invoicing will be processed through Wide Area Work Flow (WAWF), and technical acceptance will be managed by the Port Engineer.

Ship Building and Repairing

POSTED

DEADLINE

Authorized Caterpillar Parts SupplyThis subcontract, managed by the Navsup Fleet Logistics Center Yokosuka for the Department of Defense, involves the procurement and delivery of genuine Caterpillar OEM replacement parts, maintenance hardware, and spares. These supplies are intended for prime contractors supporting Navy Yard Tugs YT-805, YT-806, and YT-807 under COMFLEACT Yokosuka. The contractor is responsible for sourcing authentic parts and ensuring all items are marked and labeled in strict accordance with MIL-STD-130 and MIL-STD-129 standards. All materials must be delivered directly to the designated Navy facility located at Yokosuka Naval Base in Japan.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Heat Exchanger Overhaul ServicesThis subcontract involves the comprehensive overhaul of Port and Starboard heat exchangers for the Navy Yard Tug YT-807, supporting COMFLEACT Yokosuka. The scope of work includes the disassembly, cleaning, repair or replacement of components, testing, and final re-installation to ensure the units are fully operational. All services must be performed at the Yokosuka Naval Base in Japan. To ensure technical compliance, all work must align with Caterpillar OEM standards for the 3512C engine system, and the contractor is required to hold Caterpillar OEM Certification. This project is managed under the Department of Defense via the Navsup Fleet Logistics Center Yokosuka, falling under NAICS code 811310.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Caterpillar Marine Engine Technical ServicesThis subcontract for Caterpillar Marine Engine Technical Services involves performing Diesel Engine Inspections and seal replacements for the port and starboard Caterpillar 3512C marine propulsion engines on Navy Yard Tugs YT-805 and YT-807. Supporting COMFLEACT Yokosuka through the Navsup Fleet Logistics Center Yokosuka, the project requires the delivery of completed inspections, seal replacements, and detailed technical inspection reports. The work will be performed at Yokosuka Naval Base in Japan and mandates the use of factory-trained, Caterpillar-certified marine service technicians. This requirement falls under NAICS code 811111, with a response deadline set for October 30, 2026.

General Automotive Repair

POSTED

DEADLINE

PLATE,METAL,METRIC and BEAM,H-SHAPE,METRIC for Ship Repair Facility and Japan Regional Maintenance Center (SRF-JRMC), US Naval Base, Yokosuka, Japan.

Solicitation # N6264927QB002

Solicitation N6264927QB002, issued by NAVSUP FLT LOG CTR YOKOSUKA, is a firm-fixed-price request for the procurement of metric metal plates and H-shape beams to support the Ship Repair Facility and Japan Regional Maintenance Center at the US Naval Base in Yokosuka, Japan. The requirement includes nine sheets of 16mm metal plates conforming to JIS-G-3193 and JIS-G-3106 SM400A steel standards, and 78 meters of metric H-shape beams conforming to JIS-G-3193. All products must be new, as refurbished items are not acceptable. Delivery is required door-to-door to the A61 warehouse, with a mandate that any shipments weighing 30 pounds or more must be palletized. This acquisition is unrestricted, though it is noted as a set-aside for Economically Disadvantaged Women-Owned Small Business in some documentation. Offers must be submitted on an all-or-none basis by November 4, 2026. A critical requirement is that all sources must be authorized to operate in Japan per DFARS 252.225-7042, and prime contractors based outside of Japan must provide proof of incorporation or similar documentation. Award will be based on the most advantageous offer, primarily considering technical capability and price, with the government reserving the right to evaluate past performance. Invoicing must be processed electronically through the Wide Area WorkFlow system.

Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

DEADLINE

Caterpillar 3512C Diesel Engine Inspections, YT-807 Heat Exchanger Overhaul (This is a sole source requirement and posting this solicitation to SAM.gov is information purpose only)

Solicitation # N6264927QB003

Solicitation N6264927QB003 is a sole source requirement issued by the Navsup Fleet Logistics Center Yokosuka to procure Caterpillar OEM certified technical labor and materials for US Navy Yard Tugs YT-805, YT-806, and YT-807. The scope of work includes comprehensive Diesel Engine Inspections and seal replacements for Caterpillar 3512C engines on YT-805 and YT-807, a complete overhaul of port and starboard heat exchangers for YT-807 to be returned as spare stock, and the acquisition of authorized Caterpillar OEM replacement parts, sensors, and critical spares for all three vessels. All technical labor must be performed by factory-trained, Caterpillar-certified marine service technicians, and all parts must be brand-new OEM components with factory warranties. The period of performance is scheduled from November 16, 2026, to January 29, 2027, with the place of performance located at Yokosuka Naval Base, Japan. Due to the location, the action is restricted to sources authorized to operate in Japan. Award will be based on the most advantageous offer considering price and technical capability, and quotations must be submitted on an all-or-none basis. The contractor is required to adhere to strict naval packaging and preservation standards, including MIL-STD-129 and MIL-STD-130 for marking and labeling. Additionally, the contractor must comply with ASME crane standards and OSHA regulations for any lifting operations. Payment will be processed electronically through the Wide Area WorkFlow system.

Ship Building and Repairing

POSTED

DEADLINE

USNS SALVOR (T-ARS 52) VOYAGE REPAIR AVAILABILITY (VRA)

Solicitation # N6264927RLXXX

The NAVSUP Fleet Logistics Center Yokosuka Site Singapore intends to issue a competitive solicitation for a Voyage Repair Availability for the USNS SALVOR (T-ARS 52). Tentatively scheduled for December 2026, the ship repair availability will be performed at a contractor shipyard located in the Philippines. The scope of work encompasses general services and technical repairs across multiple ship systems, specifically focusing on hull and structural repairs, electrical repairs, and general requirements. Key deliverables include integrated project planning, gas free certificates, and comprehensive testing and quality assurance documentation, all while adhering to strict electrical safety procedures and technical specifications. To be eligible for award, offerors must maintain an active registration in the System for Awards Management and be authorized to conduct business in the Philippines. Shipyard firms within the Seventh Fleet Area of Responsibility that have not previously worked with the government are encouraged to submit a capability statement. This statement must be on company letterhead and include a description of the firm, shipyard location, relevant experience with major ship repair overhauls, contract history, and employee count. All capability statements must be submitted electronically to the Contracting Officer within fifteen calendar days of the synopsis notice.

Ship Building and Repairing

POSTED

DEADLINE

Marine Gas Free Certification ServicesThe Marine Gas Free Certification Services subcontract involves providing critical safety evaluations for vessel projects managed by the NAVSUP Fleet Logistics Center Yokosuka Site Singapore. The selected provider will be responsible for performing gas-freeing operations and issuing validated safety certificates to prime contractors, ensuring that environments are safe for hot work and repairs. This process requires the use of specialized ventilation equipment and gas detection meters to verify atmospheric safety. To qualify for this role, the provider must employ a Certified Marine Chemist or an authorized Gas Free Engineer. The work is designated to be performed in the Philippines under NAICS code 541620. Interested parties should note the response deadline of October 30, 2026, for this Department of Defense agency requirement.

Environmental Consulting Services

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Custom Airboat Hull and Frame Fabrication

POSTED

CLOSED

Manufacture and Supply of Watercraft Floor Panels

FLUID HANDLING DIVISION

POSTED

CLOSED

PROPELLER, MARINE

Solicitation # SPE7M4-26-T-271F

Defense Logistics Agency

POSTED

DEADLINE

Supply of Boat Covers (NSN: 2040016513137)

FLUID HANDLING DIVISION

POSTED

CLOSED

Marine Scuttle Unit Manufacturing and Assembly

FLUID HANDLING DIVISION

POSTED

CLOSED

Marine-Grade Window Manufacturing and Supply

FLUID HANDLING DIVISION

POSTED

CLOSED

Manufacture and Delivery of Marine Hatches

FLUID HANDLING DIVISION

POSTED

CLOSED

Marine Hardware Modification Kit Assembly

FLUID HANDLING DIVISION

POSTED

CLOSED

Supply of Boat Tillers (NSN 2030-01-652-8011)

FLUID HANDLING DIVISION

POSTED

CLOSED

DOOR, METAL, MARINE S

Solicitation # SPE7M4-26-T-281F

FLUID HANDLING DIVISION

POSTED

CLOSED

MODIFICATION KIT, MA

Solicitation # SPE7M4-26-T-252J

FLUID HANDLING DIVISION

POSTED

CLOSED

HARDWARE KIT, DOOR

Solicitation # SPE7M4-26-T-284L

FLUID HANDLING DIVISION

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS