This Government Contract opportunity from Department Of Defense was posted on September 26, 2017. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Notice of Intent to Award Sole Source

Awarded

CIFPrintersFederal

Submission Closed09/14/2017, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811212

New

Federal

Control-Display Unit (CDU) Repair and Overhaul ServicesThis subcontract, issued by Navsup Weapon Systems Support under the Department of Defense, involves the technical tear-down, evaluation, and repair of the Control-Display Unit (NSN 6110-016477412). The scope of work focuses on internal circuitry repair, modification, and testing for part number 822-2463-001 using specialized diagnostic equipment to ensure the delivery of a certified Ready for Issue unit. The project requires strict adherence to Buy American and Balance of Payments Program standards. Interested parties must note that the response deadline is November 19, 2026, and the services fall under NAICS code 811212.

Navsup Weapon Systems Support

POSTED

DEADLINE

Digital Computer Repair & Component-Level ModificationThis subcontract, issued by Navsup Weapon Systems Support under the Department of Defense, involves the technical repair and component-level modification of a specific digital computer, NSN 1680-01-541-3692 RV. The scope of work requires the contractor to perform a complete unit teardown, evaluate the hardware against technical requirements, and execute necessary modifications to restore full functionality. These tasks must be completed using specialized jigs, fixtures, and test equipment to ensure the unit is fully repaired, tested, and inspected. The project mandates strict adherence to MIL-STD-2073 packaging standards and compliance with Buy American requirements. The final deliverable is one fully restored digital computer. Interested parties should note the response deadline of November 19, 2026, and the classification of the work under NAICS code 811212.

Navsup Weapon Systems Support

POSTED

DEADLINE

Receiver-Transmitter Repair and OverhaulThis subcontract involves the teardown, evaluation, repair, and modification of naval receiver-transmitters for prime contractors supporting U.S. Navy NAVSUP Weapon Systems Support projects. The scope of work includes disassembling, cleaning, and inspecting units, followed by component-level repair and replacement. All work must be tested according to approved manuals and IPC/EIAJ-STD-001C standards, requiring the use of specialized electronic test and measurement equipment and NAVSUP WSS Source Approval. The primary objective of the contract is the delivery of six serviceable, ready-for-issue receiver-transmitters under NSN 5821-01-585-5355 P8. This effort falls under NAICS code 811212 and is managed by the Department of Defense. The response deadline for this opportunity is November 19, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Power Supply Amplifier Overhaul and RepairThis subcontract for the Department of Defense and Navsup Weapon Systems Support involves the overhaul and repair of Power Supply Amplifiers. The scope of work includes the teardown, evaluation, and modification of units to identify failed components and replace internal parts that exceed repair manual limits. All work must be performed in accordance with IPC/EIAJ-STD-001C and MIL-STD-454 standards to ensure the units are returned to a Ready for Issue condition. The project requires the delivery of six Power Supply Amplifier units and necessitates NAVSUP WSS Source Approval for the performing contractor. Interested parties should note the response deadline of November 19, 2026, and the classification of the work under NAICS code 811212.

Navsup Weapon Systems Support

POSTED

DEADLINE

Control-Display Unit Repair and OverhaulThis subcontract involves the technical repair, overhaul, and upgrade of Control-Display Units under NSN 6610-01-670-1033 for prime contractors supporting Navsup Weapon Systems Support projects. The selected provider will be responsible for executing detailed overhaul procedures, inspections, and testing to ensure all units are returned to Ready for Issue condition. Additionally, the scope includes the development of performance specifications and repair procedures to maintain operational standards. To qualify for this effort, the contractor must possess the necessary testing equipment for the specific NSN and hold NAVSUP WSS Source Approval. The primary objective is the delivery of certified RFI units. This opportunity is categorized under NAICS code 811212 and is managed by the Department of Defense.

Navsup Weapon Systems Support

POSTED

DEADLINE

Radar Transmitter Maintenance and Restoration ServicesThe Radar Transmitter Maintenance and Restoration Services subcontract involves the teardown, evaluation, and repair of radar transmitter end items supporting the USAF 448th Supply Chain Management Wing. The scope of work includes conducting test, teardown, and evaluation, replacing failed components, and performing cleaning and reassembly in accordance with MIL-HDBK-454C and T.O. 1-1-691. Additionally, the contractor must apply corrosion treatment following MIL-STD-1568E and provide final serviceable end items along with detailed reports. This project is managed under the Department of Defense and requires strict adherence to technical standards, including the use of ESD-protected environments and CMMC Level 2 compliance. Interested parties must respond by November 5, 2026, for this effort categorized under NAICS code 811212.

POSTED

DEADLINE

Aviation Processor Repair and Overhaul ServicesThe Aviation Processor Repair and Overhaul Services subcontract involves the teardown, evaluation, repair, and modification of Processor, Display A units for prime contractors supporting U.S. Navy NAVAIR projects. Managed under the Department of Defense and Navsup Weapon Systems Support, the scope of work includes disassembling processors to identify failed components, replacing faulty circuitry, updating firmware, and performing precision soldering. All work must be conducted in ESD-safe facilities using aviation-grade diagnostic tools to ensure rigorous environmental and performance testing. The primary objective of the contract is to deliver serviceable hardware returned to Ready For Issue condition. This opportunity falls under NAICS code 811212, with a response deadline of November 19, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Antenna Coupler Repair and Testing ServicesThis subcontract for Antenna Coupler Repair and Testing Services supports NAVSUP WSS and NAVAIR projects through the Department of the Navy. The scope of work involves the complete teardown, evaluation, and repair of antenna couplers, including the identification of failures and the replacement of internal components according to Rockwell Collins Drawing 822-1706-002. All units must undergo functional testing, be marked in accordance with MIL-STD-130, and be packaged per MIL-STD-2073 before final delivery. Performance will take place in Philadelphia, and the contractor must maintain ISO 9001 or AS9100 certification along with ANSI/NCSL 2540 calibration. Interested parties should note the response deadline of November 19, 2026. The project falls under NAICS code 811212 and requires the delivery of fully repaired and certified equipment.

Navsup Weapon Systems Support

POSTED

DEADLINE

Industrial and Commercial Weigh Scale Maintenance ServicesAlliance Facility Solutions Inc. is seeking a subcontractor to provide industrial and commercial weigh scale maintenance services for CBRE facility projects throughout British Columbia. The scope of work involves performing essential maintenance, calibration, and safety inspections, including preventative and seasonal tasks conducted in accordance with manufacturer procedures and the Weights and Measures Act of Canada. The primary objective is to ensure all scales are certified and operational while ensuring all CMMS work orders are properly closed. To qualify for this subcontract, providers must hold Measurement Canada certification, maintain Tier 3 Achilles status, and demonstrate full compliance with WorkSafeBC regulations. Interested parties must submit their responses by November 3, 2026, to support these critical facility operations within the province.

Alliance Facility Solutions Inc.

POSTED

DEADLINE

Nutanix Enterprise Support and MaintenanceThe Nutanix Enterprise Support and Maintenance subcontract involves providing technical support and maintenance for prime contractors working on public safety projects for the Town of Stratford. The scope of work includes delivering software support and hardware maintenance contracts managed through the Nutanix Support Portal, with a strict requirement for the provider to maintain authorized Nutanix partner status and operate a local or accessible service center. Managed by DAS Procurement for the state of Connecticut, the contract emphasizes adherence to specific service level agreements and life cycle costing. Interested parties must submit responses by October 30, 2026, to provide the necessary active support contracts and maintenance agreements under NAICS code 811212.

POSTED

DEADLINE

IBM TS3500 Tape Library Accessor Repair and InspectionThis subcontract involves the inspection and repair of IBM TS3500 (3584) tape library accessors to support projects for the City of Philadelphia Office of Innovation & Technology. The scope of work requires specialized expertise in IBM TS3500 architecture to perform comprehensive inspections of grippers, X/Y axis motors, belts, pinions, PDC cards, and bumpers. These technical services are specifically aimed at resolving error codes 48A0 and 4891 to ensure the tape library is fully operational for data migration. The project is located in Philadelphia and falls under NAICS code 811212. Interested parties should note the response deadline of October 23, 2026. The primary objective of the engagement is to restore critical hardware functionality to facilitate seamless data movement for the agency.

Office of Innovation & Technology (oit)

POSTED

DEADLINE

DiagnostX System Maintenance and Technical SupportThe DiagnostX System Maintenance and Technical Support subcontract involves providing ongoing technical assistance and maintenance for prime contractors managing Broward County health projects. The scope of work focuses on the DiagnostX Waveform Analyzer and Remote Receiver systems, requiring the contractor to perform technical troubleshooting, preventative maintenance, and necessary software updates. To ensure quality and compliance, the service provider must hold an OEM certification from Locus Diagnostics, LLC. Key deliverables for this engagement include the submission of detailed maintenance logs and the verification of system uptime. Interested parties should note that the solicitation was posted on October 19, 2026, with a response deadline of October 23, 2026. The contract falls under NAICS code 811212 and is managed through the Broward County procurement system.

Broward County

POSTED

1 day ago

DEADLINE

in 3 days

AI Contract Overview

The Defense Human Resources Activity Contracting Directorate intends to award a sole source, firm fixed price contract to NBS Technologies, Inc. for follow-on hardware and software support and maintenance of Defense Manpower Data Center Central Issuance Facility Common Access Card printers, specifically the NBS Horizon H2 and Horizon Evolution models and their accessories. This procurement, conducted under the authority of FAR 6.302-1(a)(2)(iii), is justified by the proprietary nature of the equipment, which renders NBS Technologies the only responsible source capable of satisfying the agency requirements. The contract structure consists of one 12-month base year with four additional 12-month option periods. Classified under NAICS code 811212 with a size standard of 27.5 million dollars, the requirement mandates that all participating contractors be registered in the System for Award Management with valid DUNS and CAGE code numbers. While this notice serves as an intent to award rather than a request for competitive proposals, the government allowed for the submission of capability statements by September 8, 2017, to determine if other parties could meet the specified needs.

General Info

Agency

Department Of Defense → Defense Human Resources Activity

Contract Value

$1,406,096.7

NAICS

811212 - Computer and Office Machine Repair and Maintenance

Place of Performance

VA, USA

Set-Aside

NONE

Awardee

UBIQ SOFTWARE INC.

Award Issued Date

09/15/2017, 12:00:00 AM UTC

Documents

J&A for DMDC CIF Printer Maintenance

justification-and-authorization

Low

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded

PostedAug 24

special-notice

AwardedSep 15

Contract was awarded

Submission Closed

09/14/2017, 12:00:00 AM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Defense Human Resources Activity

Contacts2 people available

OfficeALEXANDRIA, VA, 223504000, USA

Organization / AgencyDepartment Of Defense → Defense Human Resources Activity

Office AddressALEXANDRIA, VA, 223504000, USA

Contacts

Hector E. Monge

contact@example.gov

Matthew C. PooleContracting Officer

contact@example.gov

Full Description

Notice of Intent to Award Sole Source The Defense Human Resources Activity Contracting Directorate (DHRA/PK) intends to award a sole source, firm fixed price contract for one 12-month base year, with four 12-month option periods to NBS Technologies, Inc., under the authority of FAR 6.302-1(a)(2)(iii), Only One Responsible Source and No Other Supplies or Services will Satisfy Agency Requirements. The Proposed procurement is for a follow-on hardware and software support and maintenance, to include emergency call for NBS Horizon H2 and Horizon Evolution printers and accessories. This notice is NOT a request for competitive proposals. However, any party that believes it is capable of meeting this requirement may submit a written capability statement that clearly supports and demonstrates their ability to perform the requirement. A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. The North American Industry Classification System (NAICS) Code for this requirement is 811212 with the size standard of $27.5 million. All contractors doing business with the DHRA/PK must be registered with the System for Award Management (SAM). No award can be made unless the vendor is registered in SAM. For additional information and to register in SAM please access the following website: https://www.sam.gov/. In order to register with the SAM and to be eligible to receive an award from this acquisition office, all offerors must have a DUNS & CAGE Code Number. This action incorporates provisions and clauses that are in effect through Federal Acquisition Circulars 2005-95, effective January 19, 2017, and DPN 20161222. Response Date: Capability statements must be received NLT Friday, September 8, 2017 at 11:00 AM Eastern Standard Time (EST). Submissions will be reviewed to determine if they can meet the requirement. Inquiries shall only be submitted via email to Hector E Monge at hector.e.monge.civ@mail.mil.