Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

Notice of Intent to Sole Source - Bonneville Dam MOPS-30 Transformer Oil Purification System Upgrade

Active
W9127N26Q1CGKFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Army Corps of Engineers, Portland District, intends to award a single-source, firm-fixed price contract to High Purity Northwest for the refurbishment and upgrade of a MOPS-30 Transformer Oil Purification System at the Bonneville Lock and Dam. As the original manufacturer, High Purity Northwest will transport the 14-year-old system to their factory to restore it to like-new condition and install four new 16 kW heaters to increase total heating capacity to 128kW. These upgrades are critical to prevent the failure of the unit and ensure the continued reliability of the Main Generator Step-up Transformers. Failure to perform these upgrades could lead to catastrophic equipment failure, costly repairs, potential fatalities, and environmental damage from oil spills near the river. The government plans to solicit the project around September 3, 2026, with a response deadline for capability statements set for September 1, 2026. Interested parties must provide their contact information, CAGE code, and business size category to be considered based on their technical capabilities.

General Info

High Purity Northwest will refurbish and upgrade a transformer oil purification system.

Agency

Department Of Defense → W071 Endist PortlandView Agency

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and MaintenanceView NAICS

Place of Performance

Cascade Locks, OR, 97014, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

special-notice

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W071 Endist Portland
Contacts1 person available
OfficePORTLAND, OR, 97204-3495, USA
Organization / Agency
Department Of Defense → W071 Endist Portland
View Agency Profile
Office AddressPORTLAND, OR, 97204-3495, USA
Contacts
John Scukanec

Full Description

Show more

THIS IS A SPECIAL NOTICE PREPARED IN ACCORDANCE WITH FEDERAL ACQUISITION REGULATION (FAR) SUBPART 5.2 “SYNOPSES OF PROPOSED CONTRACT ACTIONS”


NAICS: 811310 - Commercial Industrial Machinery Equip Repair


Response Deadline: 1 SEP 2026


The U.S. Army Corps of Engineers (USACE), Portland District (NWP) intends to negotiate/award a firm-fixed price (FFP) service, single source procurement to High Purity Northwest, for the upgrade of an existing MOPS-30 Transformer Oil Purification System to be used for the Bonneville Lock and Dam project.


REASON FOR SOLE SOURCE ACQUISITION:


The statutory authority for this non-competitive acquisition is Revolutionary Far Overhaul RFO Part 12.102(a) Restricting Competition. The purpose of this requirement is for the upgrade of an existing MOPS-30 Transformer Oil Purification System by the system manufacturer, High Purity Northwest Inc. The MOPS-30 system will be delivered to High Purity Northwest’s factory location and refurbished to like new condition. The system will also be upgraded with four (4) new insulated 16 kW heaters bringing the total heating capacity of the system to 128kW, as well as other upgrades listed in the performance work statement.


Background: The existing Mobile Oil Purification System (MOPS-30) owned by USACE, Bonneville Lock and Dam is 14 years old, therefore much of the system's components are entering end-of-service life and need to be replaced to prevent failure of the unit. High Purity Northwest Inc. is the manufacturer of the existing MOPS-30 unit and is the only source that can efficiently and reliably upgrade this system.


Justification: These upgrades will allow Bonneville Lock and Dam to reliably continue use of its existing MOPS-30 unit. The upgrades will also allow the MOPS-30 unit to process larger volumes of oil and move and filter oil using just the outlet pump and new outlet filter.


Impact: The MOPS-30 Transformer Oil Purification System is used to routinely purify the oil in the Main Generator Step-up Transformers (GSUs) at Bonneville Lock and Dam. If the award of this contract is delayed, then maintaining the reliability of the GSU transformers at Bonneville Lock and Dam is also delayed. A potentially harmful or unfavorable condition could occur and possibly lead to a catastrophic failure of the existing MOPS-30 unit and/or the GSU transformer(s). Not only could the repair/replacement and installation of the equipment be costly, but there would be an elevated risk of collateral damage and possible fatalities if the GSU transformers were to fail. Because this equipment is located adjacent to the river, environmental impacts due to an oil spill would also be probable.


The Government intends to solicit to High Purity Northwest directly for this project on or around 3-SEP-2026.  At this time, a solicitation does not exist.  All responsible sources may submit a capability statement, proposal, or quotation, which shall be considered by the agency.


*NO PHONE INQUIRIES, PLEASE.


CAPABILITY STATEMENT SUBMISSION REQUIREMENTS


(PLEASE REVIEW ALL BELOW)


Point of Contact name, email address and phone number, CAGE code and DUNS number (if available); In the event that the organization is a small business, please state the category of small business, such as 8(a), HUBZone, SDVOSB/VOSB, Women-Owned Small Business.


The Government will evaluate the capabilities of an interested party based on their ability to demonstrate the technical capability and potential performance of this requirement.


Send responses, labeled as “W9127N26Q1CGK – Bonn Transformer Oil Purification System Upgrade,” to the following:


john.r.scukanec@usace.army.mil


suzanne.w.hunt@usace.army.mil


Similar Contracts

Same NAICS industry code

NAICS: 811310
New
1089 – Cafeteria freezer #1 & Cooler #4 Replacement
Solicitation # 1089-cafeteria-freezer-1-cooler-4-replacement
This subcontracting opportunity for the Atterbury Job Corps Center in Edinburgh, Indiana, involves the full removal and replacement of cafeteria walk-in freezer #1 and walk-in cooler #4. The replacements are necessary due to significant frame and door damage on the freezer and a sagging ceiling and operational failure of the cooler. Additionally, the project includes correcting the exit door of the main electrical room to ensure compliance with NEC 2020 standards by installing panic hardware and ensuring the door opens toward the egress. Bidders must attend a mandatory site visit on September 3, 2026, and submit a single lump sum proposal by September 11, 2026. The award will be based on best value, evaluating price (60 points), quality (20 points), past performance (10 points), and schedule (10 points). Requirements include a valid Indiana contractor's license, adherence to Davis-Bacon Act wage determinations, and compliance with EPA and OSHA regulations. Selected contractors must provide a sequenced construction schedule within 10 days of the Notice to Proceed and start work within 14 days. Deliverables include a one-year workmanship guarantee, manufacturer warranties, and all necessary operating manuals and training. The project is set aside for various small business categories, including SDB, WOSB, HUBZone, and VOSB.
Adams & Associates, Inc.

POSTED

about 13 hours ago

DEADLINE

in 15 days
View Details
NAICS: 811310
New
Field Disassembly of a WWII Tank Hull at Twentynine Palms, CA
Solicitation # M0026426Q0134
Bastion Supply & Logistics, an SDVOSB small business, is seeking a subcontractor for the field mechanical disassembly of a WWII M4A3 Sherman tank hull located at MCAGCC Twentynine Palms in San Bernardino County, California. The scope of work involves the undercarriage removal and recovery of two track chains, four bogie truck assemblies, twelve road wheels with arms, two drive sprockets, one idler, four return rollers, a bulldozer mounting arm, and a belly plate. The project requires a specific oxy-acetylene torch cut on an engine deck door stop, which must be performed by a certified individual with five years of documented experience. The contractor is responsible for palletizing and steel-banding all components, providing portable sanitation, and managing lead-bearing waste. The project is estimated to take three to five working days, with range availability confirmed between October 31 and December 7, 2026. All personnel must possess DBIDS base access, antiterrorism awareness, and complete mandatory briefings on range safety, desert survival, and desert tortoises. Bastion will provide a 35,000 lb forklift and a skid steer, though the subcontractor must provide any necessary crane mats or dunnage. This effort is subject to the Service Contract Act and DOL Wage Determination 2015-5629, requiring certified payroll. Quotes must be submitted as firm not-to-exceed amounts by September 3, 2026, and any resulting subcontract is contingent upon the award of the prime contract under solicitation M0026426Q0134.
PURECJ HOLDING LLC dba Bastion Supply & Logistics

POSTED

about 13 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → W071 Endist Portland

Same awarding agency

NAICS: 237990
New
Federal
Foster Spillway Gate Nut Replacement and Re-Tensioning
Solicitation # PANNWD-26-P-0000033137
The Department of Defense, through the USACE Portland District, is seeking industry capabilities for the Foster Spillway Gate Nut Replacement and Re-Tensioning project in Oregon. This effort involves the supply and replacement of custom hardware, including 192 castle nuts, 48 U-bolts, 8 U-bolt spacers, and 8 gate connection pins, as well as the provision of a custom installation tool. Most components are to be fabricated from A564 UNS 17400 Type 630 Condition H1100 material, while spacers will be made from self-lubricated composite material. Beyond hardware replacement, the contractor is responsible for the release and re-tensioning of wire ropes to ensure the gate contacts the spillway ogee evenly and does not rub side walls during vertical travel. The project is estimated to cost between 1 million and 5 million dollars and is expected to be awarded as a single Firm Fixed-Price contract via an Invitation for Bid in December 2026. Performance requirements include the operation of a crane, use of scaffolding or suspended manbaskets, and the management of stoplogs. The contractor must also handle the closure of Foster Dam Road for public safety. Due to the remote location, the project faces challenges such as limited ingress and egress, inclement winter weather, and wildfire risks. Additionally, a specific work window will be established to accommodate maintenance needs and the protection of fish species. Eligible bidders must be registered in the System for Award Management and maintain CMMC Level 2 (Self) certification or higher prior to award.
Other Heavy and Civil Engineering Construction

POSTED

3 days ago

DEADLINE

in 6 days
View Details
NAICS: 237990
New
Federal
John Day Dam Fish Pump Rehabilitation Project
Solicitation # W9127N26BA031
The John Day Fish Pump Rehabilitation Project is a Department of Defense procurement under solicitation number W9127N26BA031, targeting the major mechanical rehabilitation of Fish Pump Unit 2 at the John Day Lock and Dam on the Columbia River near Rufus, Oregon. The scope includes the removal, refurbishment, and replacement of critical components such as the lower and upper pump shafts, bearings, bearing brackets, and a right-angle drive gearbox, with all shafts requiring true-up machining and replacement of stainless bearing journals with greaseless bearing liners. The contractor must deliver and install a new gearbox along with comprehensive technical documentation, including operation and maintenance manuals, gear design calculations, gearbox detail drawings, and a full set of spare parts for the lube system. Work involves off-site fabrication of steel and composite components and on-site installation, requiring strict adherence to manufacturer specifications for alignment, balancing, and final testing, including pre-test inspections and a final validation prior to returning the system to service. The project is scheduled for performance between November 2026 and July 2029, with a targeted shutdown window for Unit 2 from December 1, 2026, to November 26, 2027. The estimated contract value ranges from $1 million to $5 million, and the procurement is structured as a Total Small Business Set-Aside under FAR 19.5, with NAICS code 237990 and a small business size standard of $45 million. The solicitation is currently in pre-solicitation phase, with the formal invitation for bids expected to be released on or about July 15, 2026, and bids due approximately 30 days after advertisement. All bids must be submitted by the deadline of August 25, 2026, and the procurement is administered by the W071 Endist Portland office of the U.S. Army Corps of Engineers, with direct inquiries directed to Joseph Jarvis. No reimbursement is available for costs incurred during the pre-solicitation phase, and the government reserves the right to cancel the solicitation at any time prior to award.
Other Heavy and Civil Engineering Construction

POSTED

3 days ago

DEADLINE

in 16 days
View Details