This Government Contract opportunity from Texas was posted on July 14, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

On-Site Installation and Commissioning Services

Closed

State & Local

Submission Closed07/23/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811212

New

Federal

Warranty and Technical Support ServicesThe contract requires the provision of manufacturer-level warranty services for PCR systems, encompassing comprehensive coverage of parts, labor, technical support, and software updates throughout the agreed service period. This obligation ensures that all equipment remains fully operational and current with the latest software enhancements, with all maintenance and repair activities to be conducted at the highest standard of technical proficiency. The warranty must be honored promptly and without undue delay, maintaining system performance and reliability for end users. The contract is a subcontract under the Department of Veterans Affairs, managed by the 246-NETWORK Contracting Office 6, with performance specifically designated for Durham, North Carolina, 27705. It was posted on August 4, 2026, with a response deadline of August 12, 2026, and falls under NAICS code 811212, which pertains to medical and diagnostic equipment repair and maintenance. The contract does not specify any set aside status or small business designation, and the point of contact information is not provided in the published data. Suppliers must respond by the deadline to be considered for award and must demonstrate capacity to deliver all mandated warranty services at the manufacturer’s level.

246-NETWORK Contracting Office 6 (36C246)

POSTED

DEADLINE

On-Site Installation and CalibrationThe contract requires the delivery, installation, configuration, calibration, and operational verification of new PCR systems at a designated location in Durham, North Carolina, with an official zip code of 27705. All activities must be performed on-site and coordinated directly with the Contracting Officer’s Representative to ensure compliance with technical and procedural requirements. The work falls under NAICS code 811212, indicating a focus on medical and diagnostic laboratory services, and is structured as a subcontract under the Department of Veterans Affairs, specifically managed by the 246-NETWORK Contracting Office 6. The solicitation was posted on August 4, 2026, with a firm response deadline of August 12, 2026, at 2:00 PM Eastern Time. All responsibilities include ensuring system functionality meets specified standards and that documentation supports successful verification of performance post-installation.

246-NETWORK Contracting Office 6 (36C246)

POSTED

DEADLINE

On-Site Commissioning and Start-Up ServicesThe contract outlines the execution of on-site commissioning, functional testing, and start-up services for a generator and load bank system, with a focus on performance verification and seamless integration into the existing infrastructure. All work must be completed at the designated location under the jurisdiction of the Eastern Municipal Water District in California, ensuring the equipment operates within specified parameters and meets all technical and safety standards. The services require skilled personnel to conduct comprehensive system checks, validate operational readiness, and confirm compatibility with connected systems prior to handover. Subcontractors must submit proposals by the deadline of August 24, 2026, and the opportunity is classified under NAICS code 811212, indicating it pertains to industrial and commercial machinery and equipment repair and maintenance. There is no set-aside designation, and the solicitation is open to qualified vendors without geographic or demographic restrictions. The work is expected to be performed on-site, and successful bidders will be responsible for all logistics, equipment, labor, and documentation required to complete the commissioning and start-up process in full compliance with project requirements.

Eastern Municipal Water District

POSTED

DEADLINE

Quality Inspection and Acceptance SupportThe contract requires comprehensive pre-shipment inspection and documentation services to verify that valves comply with all Department of Defense Logistics Agency technical specifications, packaging requirements, and military standards before government acceptance. The work is focused on ensuring product conformity through rigorous quality control measures at the place of performance in Tracy, California, with a ZIP code of 95304-5000. All inspections must be conducted in accordance with DLA protocols to confirm that each valve meets the defined performance, durability, and packaging criteria necessary for military use. This is a subcontract solicitation under NAICS code 811212, with a response deadline of August 6, 2026, and was posted on August 3, 2026. The contracting entity is DLA Dist San Joaquin under the Department of Defense, and participation is open without any specific set-aside designation. The successful bidder must be prepared to deliver detailed documentation alongside inspection results to facilitate timely government acceptance, with no provision for alternative performance locations specified. All activities must align strictly with DLA's established procedures for military-grade valving systems, emphasizing precision, traceability, and adherence to federal standards.

POSTED

DEADLINE

Quality Inspection & Destination Acceptance SupportThis contract seeks a small business subcontractor to provide post-shipment quality assurance services focused on ensuring product compliance and facilitating destination acceptance for deliveries under the Department of Defense’s Strategic Acquisition Program Directorate. The scope includes performing quality inspections after shipment, managing corrective actions for any rejected deliveries, and providing comprehensive documentation support to assist with inspections at the final destination. The requirement is set aside exclusively for total small businesses under the SBA’s Small Business Set-Aside program, classified under NAICS code 811212, indicating a focus on repair and maintenance services. Proposals must be submitted by August 18, 2026, following the posting date of August 3, 2026, with all work expected to support defense logistics operations and uphold strict quality standards for delivered items.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Barcoding and Labeling ServicesThe contract requires the application of durable, MIL-STD-129-compliant barcodes and labels to military kits and shipping containers, ensuring accurate tracking and logistics support through the inclusion of NSN, part number, and quantity data. This work must meet strict military standards for durability and readability under operational conditions, and the labels must be securely affixed to ensure longevity during handling and transit. The service is critical for maintaining inventory integrity and supply chain efficiency across Department of Defense operations. The contract is classified as a subcontract, with a solicitation posted on August 3, 2026, and a response deadline of August 11, 2026. It falls under NAICS code 811212 and is associated with the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense. All work must be performed at Robins Air Force Base, Georgia, with a zip code of 31098-1887. The contract is not subject to any specified set-aside status and requires full compliance with military barcode standards without exception.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Defense-Compliant Marking, Barcoding, and Traceability ServicesThe contract requires the application of permanent physical markings, 2D Data Matrix barcodes, and labels to items and containers in strict compliance with MIL-STD-129 and RQ017 standards to ensure full traceability for the Department of Defense. All work must adhere to DoD-mandated specifications for durability, readability, and data accuracy to support logistics and supply chain operations across military installations and operations. The services are subcontracted under the ASC COMMODITIES DIVISION and are governed by NAICS code 811212, indicating a focus on industrial and commercial equipment maintenance and repair services. The solicitation was posted on August 3, 2026, with responses due by August 11, 2026, and the place of performance is not specified, suggesting flexibility in execution locations as long as contractual requirements are met. The contract falls under a subcontract arrangement with no set-aside designation, meaning it is open to all qualified entities regardless of business size or ownership status. Interested parties must access the full details via the provided DIBBS link to ensure full alignment with technical and procedural expectations before bidding.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Counterfeit Electronic Parts Detection and AvoidanceThe contract requires the implementation and maintenance of a system designed to detect and prevent the introduction of counterfeit electronic components into the supply chain, ensuring the integrity and reliability of all electronic parts used in defense-related applications. This system must be capable of identifying fraudulent, altered, or substandard components at multiple stages of procurement, manufacturing, and distribution, incorporating advanced verification technologies, inspection protocols, and data tracking mechanisms to mitigate risks associated with counterfeit electronics. The solution must be scalable, adaptable to evolving threats, and fully integrated into existing logistics and quality assurance frameworks. This subcontract is issued under the Department of Defense with a NAICS code of 811212, specifying services related to electronic equipment repair and maintenance. The solicitation is open for responses through August 13, 2026, with no set-aside restrictions indicated. Performance is expected to support defense infrastructure nationwide, though no specific location is designated. The contractor must demonstrate technical proficiency in supply chain security, electronic component analysis, and compliance with federal standards for hardware authenticity, ensuring the system remains effective against both current and emerging counterfeiting techniques without disruption to operational timelines or mission readiness.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Military Shipment Marking and LabelingThe contract entitled Military Shipment Marking and Labeling requires the application of standardized military markings and hazard warning labels to unit containers in strict compliance with MIL-STD-129 and OSHA HazCom standards. This subcontract is issued under a Total Small Business Set-Aside designation, reserving the opportunity exclusively for small businesses as defined by the SBA, and is classified under NAICS code 811212, which pertains to commercial and industrial machinery and equipment repair and maintenance. The solicitation was posted on August 3, 2026, with a response deadline of August 18, 2026, and is managed by the Strategic Acquisition Program Directorate within the Department of Defense. Work must be performed in accordance with federal contracting guidelines, though the specific place of performance is not designated in the provided data. All contractors must ensure precise adherence to both military and chemical hazard communication requirements to meet operational and safety standards for defense logistics.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Preventive and Corrective Maintenance ServicesThe contract entails the provision of on-site and remote maintenance services for Radiometer ABL90 Flex Plus analyzers, encompassing both preventive and corrective repairs, comprehensive troubleshooting, and strict adherence to manufacturer specifications and regulatory requirements. All services must be performed to ensure continuous operational integrity and compliance with applicable standards, supporting uninterrupted clinical functionality in healthcare environments. The solicitation is classified as a subcontract under NAICS Code 811212 and is managed by the Department of Veterans Affairs through the 262-NETWORK Contract Office 22. The place of performance is designated with a zip code of 92357-1000, indicating the primary geographic focus for service delivery. The opportunity was posted on August 3, 2026, with a response deadline of August 18, 2026, and is accessible via the SAM.gov platform for interested parties to submit proposals.

262-NETWORK Contract Office 22 (36C262)

POSTED

DEADLINE

Government Acceptance Testing & Certification SupportThe contract seeks technical support services during Government Acceptance Testing for a system operated by the Department of Veterans Affairs through the 256-NETWORK Contract Office 16, with performance expected to occur in an unspecified location. The focus is on providing real-time issue resolution and comprehensive documentation of system performance throughout the acceptance testing phase, ensuring the system meets all operational and functional requirements before certification. The work is structured as a subcontract and must be delivered within a narrow window, with proposals due by August 7, 2026, following a posting date of August 3, 2026. The North American Industry Classification System code 811212 indicates the work involves computer and office machine repair and maintenance, suggesting the support may involve hardware or integrated system troubleshooting, diagnostics, and performance validation under government oversight.

256-NETWORK Contract Office 16 (36C256)

POSTED

DEADLINE

Post-Construction Installation & System IntegrationThe contract pertains to the post-construction installation and system integration of ophthalmic equipment at a Department of Veterans Affairs facility, requiring on-site work to ensure full operational functionality. This includes making all necessary electrical connections, integrating software systems to achieve interoperability with existing medical infrastructure, and thoroughly removing any debris generated during installation to meet safety and sanitation standards. The task will be performed as a subcontract under the NAICS code 811212, which classifies medical and dental equipment and supplies merchant wholesalers, indicating a specialized technical scope focused on precision medical hardware. The solicitation was posted on August 3, 2026, with a strict response deadline of August 7, 2026, at 8:00 PM Eastern Time, leaving a narrow window for interested parties to submit proposals. The performance location is tied to the 256-NETWORK Contract Office 16, though specific site details such as city, state, or zip code are not provided in the data, suggesting the work may be distributed across multiple VA facilities under this contract umbrella. The contract type is explicitly a subcontract, meaning the prime contractor is managing the overall effort and will engage qualified subs to execute the installation and integration tasks, requiring bidders to demonstrate technical expertise in ophthalmic systems, compliance with healthcare standards, and proven experience in secure, clean facility environments.

256-NETWORK Contract Office 16 (36C256)

POSTED

1 day ago

DEADLINE

in 3 days

AI Contract Overview

Texas A&M University is seeking an OEM-authorized technician to perform on-site installation, testing, and operational demonstration of an e-beam evaporation system. The scope includes full commissioning of the equipment, ensuring all systems are properly calibrated and functional under real-world conditions, along with the responsible disposal of all packaging materials generated during the process. The subcontract opportunity is open for responses until July 23, 2026, and falls under NAICS code 811212, indicating it is related to electronic and precision equipment repair and maintenance services. The work must be conducted at the university’s designated location, though specific city or state details are not provided in the posting. Interested parties must submit their proposals by the deadline to be considered for this engagement.

General Info

OEM-authorized technician to install, test, and commission e-beam evaporation system at Texas A&M by July 23, 2026.

Agency

Texas A&M UniversityView Agency

NAICS

811212 - Computer and Office Machine Repair and MaintenanceView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedJul 14

subcontract

Response DeadlineJul 23

Deadline has passed

Submission Closed

07/23/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyTexas A&M University

ContactsNo contacts available

OfficeN/A

Organization / Agency

Texas A&M University

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

On-site installation, testing, and operational demonstration of the e-beam evaporation system by an OEM-authorized technician, including packaging disposal.