Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Pierce Saber Pumper Structural & Auto Body Repair

Active

Federal

Response Deadline09/24/2026, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves commercial auto body and structural repairs for a 2019 Pierce Saber Pumper located at Beale AFB. The scope of work includes repairing structural damage to the passenger rear cab and replacing both front and rear cab steps to ensure the vehicle is restored to original factory Pierce specifications. To qualify, the contractor must be an authorized Pierce Manufacturing repair facility or employ EVT certified mechanics, with the final deliverable being a vehicle that passes a quality control inspection. The project is managed by the Department of Defense under agency FA4686 9 Cons Pk and is designated as a total Small Business Set Aside. It falls under NAICS code 811121 and is performed in the 95903 zip code area. The solicitation was posted on September 15, 2026, with a response deadline of September 24, 2026.

General Info

Auto body and structural repairs for 2019 Pierce Pumper at Beale AFB.

Agency

Department Of Defense → FA4686 9 Cons PkView Agency

NAICS

811121 - Automotive Body, Paint, and Interior Repair and MaintenanceView NAICS

Place of Performance

0, CA, 95903, USA

Set-Aside

SBA

Documents

This scope was carved out of FA468626QS032.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

9 CES E-8 Repair

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 15

subcontract

Response DeadlineSep 24

Submission deadline

Response Deadline

09/24/2026, 02:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA4686 9 Cons Pk

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA4686 9 Cons Pk

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs commercial auto body and structural repairs for prime contractors on Air Force vehicle management projects, here a 2019 Pierce Saber Pumper at Beale AFB. Repairs structural damage to the passenger rear cab and replaces front and rear cab steps to restore vehicle to factory Pierce specifications. Requires an authorized Pierce Manufacturing repair facility or EVT certified mechanics. Delivers a repaired vehicle passing QC inspection.

Similar Contracts

Same NAICS industry code

SOLICITATION_Corrosion Control_AIMD, GUAM

Solicitation # N6264926QH041

Solicitation N6264926QH041 is a request for a Firm Fixed Price contract to provide vehicle and equipment corrosion control repairs, rustproofing, and prevention services for the Commander, Fleet Air Western Pacific (CFWP) Aviation Intermediate Maintenance Detachment (AIMD) at Andersen Air Force Base, Guam. The scope of work includes the transport, washing, repainting, and rustproofing of various ground support equipment, such as compressors, carts, and trailers, to be performed at the contractor's own facility. The period of performance is scheduled from September 30, 2026, to September 30, 2028. This requirement is specifically set aside for Women-Owned Small Businesses (WOSB) under NAICS code 811121. The government will utilize a Best Value Trade-Off process to award the contract, evaluating offerors based on Technical Capability, Past Performance, and Price. Technical and past performance factors are combined and weighted more heavily than price. To be eligible, offerors must demonstrate the availability of a local Guam facility and provide evidence of specialized corrosion control experience within the last three years. Technical requirements include adherence to specific military standards for coatings and finishes, such as MIL-PRF-23236 and MIL-PRF-24635, while allowing for commercial rustproofing equivalents. Proposals must be submitted in two volumes: one for technical capability and past performance, and another for price and administrative documentation. The final response deadline is September 17, 2026.

Navsup Flt Logistics Ctr Yokosuka

POSTED

about 18 hours ago

DEADLINE

23BLE East Vehicle Upfit and Removals

Solicitation # 6100066694

The Pennsylvania Game Commission and the Bureau of Law Enforcement are seeking a qualified supplier to provide comprehensive design, procurement, and installation services for law enforcement vehicle upfits, as well as maintenance and tear-down services for retired fleet vehicles. The scope includes the installation of agency-provided and vendor-procured radio telecommunication systems, lighting packages, and ancillary equipment into approximately 50 to 65 vehicles annually, specifically targeting Silverado 1500 PPV, Silverado 2500, and Tahoe models. The project is divided into two lots: Lot 1 covers vehicle upfits within 50 miles of the Southeast Regional Office in Reading, and Lot 2 covers removal services within 20 miles of the Harrisburg headquarters. The contract is anticipated to begin around November 1, 2026, for the FY26 to FY27 period, with options for four additional one-year renewals. Award will be granted to the lowest responsive and responsible bidder, potentially by lot, line item, or as a total bid. Technical requirements are governed by detailed installation manuals and specifications, including BCM wiring for surveillance mode and specific power distribution standards. Bidders must comply with the Reciprocal Limitations Act and provide various certifications, including lobbying and Iran Free Procurement disclosures. Payment is processed via ACH within 30 business days following the visual inspection and approval of the final product by the Project Manager.

Pennsylvania Game Commission

POSTED

DEADLINE

414274 -mkj PSI: Truck Wrap Installation

Solicitation # SRC0000041879

This contract is a solicitation for vehicle wrap services for 2025 Ford F-150 trucks, specifically covering full wraps, ceramic coating over vinyl surfaces, and wrap removal. The agreement is managed through the OhioBuys portal, with a performance period extending from the time of the executed contract through June 30, 2027. To be considered responsive, bidders must submit a PDF quote and ensure all pricing is entered into the OhioBuys item grid, as the state will not cover unspecified costs. The contract will be awarded to the lowest responsive and responsible bidder. All communications and inquiries must be handled through the official OhioBuys Inquiry Field.

Dps100000 Directors Office Cdsb

POSTED

DEADLINE

9 CES E-8 Repair

Solicitation # FA468626QS032

The Department of Defense, through the 9 Cons Pk at Beale AFB, is seeking a contractor to provide all labor, tools, equipment, and original equipment manufacturer parts for commercial auto body and structural repairs on one 2019 Pierce Saber Pumper, registration AF19L00242. The scope of work includes repairing the passenger rear cab, replacing front and rear cab steps, replacing passenger front and rear fender flairs, and repairing or replacing the passenger rear compartment door with a new latch and handle assembly. All repaired areas must be painted and color-matched to the existing exterior finish, including the replacement of reflective striping, to restore the vehicle to factory Pierce specifications and safe operational status. This is a pre-solicitation notice for a total small business set-aside, planned as a single-source award under FAR 6.103-1, with Golden State Fire Apparatus identified as the authorized provider in northern California. To be eligible, the contractor must be an authorized Pierce Manufacturing repair facility or employ Emergency Vehicle Technician certified mechanics specializing in Pierce apparatus, providing a signed notice of licensure valid through September 30, 2026. The government will deliver the vehicle to the contractor's facility, and final acceptance is contingent upon a quality control inspection by the Beale AFB Vehicle Management Flight. Responses are due by 0700 PST on September 24, 2026, to the designated contracting officer and specialist.

FA4686 9 Cons Pk

POSTED

DEADLINE

AS-NEEDED COLLISION REPAIR SERVICES

Solicitation # 011-27

The City of El Cajon is seeking proposals for as-needed collision repair services under solicitation number 011-27. This local government opportunity is based in El Cajon, California, and is designed to establish a provider for vehicle collision repairs on an as-required basis. Interested parties must submit their responses by the deadline of October 15, 2026, at 5:00 PM PT. Detailed bid documents and registration requirements are available through the PlanetBids portal, and all prospective bidders are responsible for monitoring the site for any official addenda.

City of El Cajon

POSTED

DEADLINE

Vehicle Body and Frame Repair ServicesThe General Services Administration is seeking a small business subcontractor to provide vehicle body and frame repair services in Houston, Texas. The contractor will be responsible for performing comprehensive body damage repairs, straightening frames, and restoring structural components and lighting systems using specialized frame alignment equipment and replacement panels to ensure vehicles meet all operational and safety standards. This subcontract opportunity is designated as a total Small Business Set Aside under NAICS code 811121. Interested parties must submit their responses by September 29, 2026, to support prime contractors on GSA vehicle repair projects.

Gsa/fas/ttl/qmd/amc

POSTED

DEADLINE

Solicitation # RFP-2026-0002

Sussex County EMS is seeking bids for the upfitting of eight 2026 Chevrolet Silverado 2500 pickup trucks with 6.5 inch beds to be used as EMS response vehicles. The awarded vendor will be responsible for picking up the vehicles from the EMS Logistics Office in Georgetown, Delaware, performing the conversion, and delivering the completed vehicles back to the same location. All work must comply with the State of Delaware Motor Vehicle Code, Federal Motor Vehicle Safety Standards, and other applicable industry standards. Deliverables include the upfitted vehicles, certificates of origin, and certified scale weight documents for the front and rear axles. A five year warranty on labor and non wearing parts, including the electric HVAC, is required. The contract will be awarded to the lowest responsive and responsible bidder. Proposals must be submitted in a sealed envelope marked SCEMS Vehicle Uplift Proposal to Kristen McAfee by 1:00 p.m. local time on October 2, 2026. Bidders must provide a signed certification of bidder and adhere to strict submission formats, including the use of provided forms and numerical figures. The period of performance extends from the date of award through June 30, 2026, with a requirement that vehicles be delivered within 90 days of receipt by the vendor to avoid a penalty of 100 dollars per day. Successful bidders must provide a certificate of insurance within 20 days of the award notice, meeting specific limits for general liability, business auto liability, and transit cargo insurance.

POSTED

DEADLINE

CUSTOM MOBILE FIELD LABORATORY VAN BUILD

Solicitation # 140G0226Q0173

The Department of the Interior, through the USGS OAG Denver Acquisition Branch, is soliciting a firm fixed price contract for the custom build-out of a mobile field laboratory van to support the Colorado Water Science Center - Pueblo. This total small business set-aside requires the contractor to provide all non-personal commercial services, including labor, materials, equipment, and supervision, to deliver a fully operational mobile lab by March 31, 2027. The scope of work involves a comprehensive build-out featuring specific installations such as RV-standard sinks, CODT-standard flashing LED marker lights, and various electrical and water tank components as detailed in the technical exhibits. The final product must be delivered FOB Destination to the Colorado Water Science Center in Pueblo, Colorado. Award will be granted based on the lowest priced technically acceptable offer. To be considered technically acceptable, offerors must submit technical brochures and specifications proving that all proposed equipment meets the minimum required characteristics. All components must be authentic, manufacturer-certified, and delivered in original packaging, with a strict prohibition on gray market or counterfeit items. Payment will be processed electronically via the Invoice Processing Platform. The procurement is managed by Contracting Officer Jennifer Rollin, and final acceptance is contingent upon inspection by the Administrative Point of Contact to ensure the build meets all specified technical requirements.

Ofc Of Acquisition Grants-Denver

POSTED

DEADLINE

Vehicle Modification for a Person with Disabilities in Higganum, CT

Solicitation # 26BRS046

The State of Connecticut Bureau of Rehabilitation Services is soliciting bids under RFQ 26BRS046 for vehicle modifications to a 2017 Ford F250 for a driver with a cervical spinal cord injury in Higganum, Connecticut. The required modifications include a removable Adapt Link driver seat, a wheelchair lift, hand controls, a steering knob, a driver-side grab bar, a panoramic rearview mirror, and a chest strap with a D-ring closure. Bidders must be NMEDA/QAP certified in good standing, provide in-state service, and have the vehicle on hand to bid. All quotes must be submitted by September 25, 2026, and must include detailed unit pricing, amounts, and totals on the official CT BRS Bid Breakdown form. Technical compliance is based on the Vehicle Evaluation Report from Easterseals Driver Assessment, and any proposed equivalent equipment must be accompanied by a detailed explanation. Safety is a primary requirement, necessitating an airbag on/off switch if the client is in the deployment zone and an NHTSA approval letter if airbags are eliminated. Final payment is contingent upon the vehicle passing a rigorous inspection and test drive conducted by a consulting automotive engineer to ensure safe highway operation and adherence to specifications. Vendors are also responsible for coordinating client fittings and providing comprehensive training on the use of the adaptive equipment.

DAS Procurement

POSTED

DEADLINE

MP Police Outfitting - Repair and Overhaul (R&O)

Solicitation # W8486-270799/A

The Department of National Defence has issued solicitation W8486-270799/A for the regionalized repair, overhaul, and outfitting of Military Police (MP) vehicles. The contract involves the installation of new policing equipment on up to 35 new vehicles annually and the decommissioning of up to 35 vehicles annually through the removal of emergency and communications equipment and police markings. The resulting contract will span three years with an option to extend for one additional year. Award is based on the lowest evaluated aggregate price among bidders who meet all mandatory technical criteria, including a requirement for the contractor to have been in the business of removing police equipment for at least five years. To be compliant, bidders must maintain operational facilities in three specific regions: Western Canada (BC to Manitoba), Central Canada (Ontario and Quebec), and Eastern Canada (New Brunswick to Newfoundland). All equipment installed must be new, and the contractor is responsible for providing qualified on-site labour and a secure storage facility. Pricing is firm for the duration of the contract, meaning the contractor assumes all risks associated with exchange rate fluctuations, tariffs, and customs duties. The scope also includes providing telephone troubleshooting and initiating warranty repairs within 48 hours of vehicle receipt. Quality management must adhere to ISO 9001:2015 standards, and the contractor must manage all controlled goods reporting and demilitarization certifications.

Department of National Defence

POSTED

DEADLINE

PWC Shawnee Truck Service Body

Solicitation # SRC0000041141

The Ohio Department of Natural Resources is seeking bids for the procurement and installation of a new Reading Classic II truck service body for Shawnee State Park. The service body must be installed on a 2021 GMC Sierra 2500 single cab long bed with a cab-to-axle measurement of 55.25 inches. Required specifications include a single-stage white paint finish, a recessed bumper to accommodate the factory hitch, and the use of spring retainers for the doors. Additionally, a spray liner is required for both the bumper and the cargo area. The contract will be awarded to the lowest responsive and responsible bidder, with preferences applied for Buy American and Buy Ohio certifications. The winning vendor must be located within 100 miles of Shawnee State Park and is responsible for picking up the vehicle and delivering the completed unit. The original factory truck bed will remain in the possession of the customer. All proposals must be submitted electronically through the Ohio Buys portal to be considered. The requested completion and delivery date is October 30, 2026, with the purchase order remaining valid for goods and services received through June 30, 2027. Invoices must be submitted directly to Financial Shared Services and include the identifier Origin-DNR-N08.

Dnr353315 Shawnee State Park Dnrsci

POSTED

DEADLINE

RFP DOS 2027-01 NHSP Law Enforcement Vehicle Upfitting

Solicitation # RFP DOS 2027-01

The New Hampshire Department of Safety is seeking a contractor for RFP DOS 2027-01 to provide comprehensive upfitting services for New Hampshire State Police vehicles. The scope of work includes painting, decaling, and the installation of all necessary equipment required to prepare these vehicles for active deployment. This solicitation was posted on September 9, 2026, with a response deadline of October 7, 2026. Interested parties should direct inquiries to the primary point of contact, Dianna Courtemanche, via the provided agency email or phone number.

Department Of Safety

POSTED

DEADLINE

More opportunities from Department Of Defense → FA4686 9 Cons Pk

Same awarding agency

Beale AFB - Vindicator Upgrade

Solicitation # FA468626QS029

Solicitation FA468626QS029 is a 100% small business set-aside request for quote issued by the Department of the Air Force for the modernization of the Intrusion Detection System (IDS) and Automated Access Control System (AACS) at Beale Air Force Base, California. The project involves evaluating and upgrading approximately 18 end-of-life Honeywell V5 panels to Honeywell V6 panels, ensuring full compliance with ICD 705 standards for SCIF environments and seamless integration with the 9 SFS Base Defense Operations Center. The scope of work includes the evaluation of existing infrastructure, procurement of compliant equipment, and all labor required for installation, testing, and programming. The proposed period of performance is from September 30, 2026, to February 28, 2027. The acquisition is structured with several CLINs, including the base evaluation, equipment procurement, and installation services, as well as an optional CLIN for replacing Korby pinpads with HID proximity readers and a contingency CLIN for unforeseen infrastructure repairs. Award will be based on the most advantageous offer, considering price and technical factors such as Honeywell VINDICATOR certifications, expertise in ICD 705, and a proven track record of similar legacy-to-modern Honeywell platform upgrades. Offers are due by 12:00 noon PDT on September 22, 2026. Offerors must be registered in the System for Award Management and provide a technical proposal not exceeding eight pages.

Security Systems Services (except Locksmiths)

POSTED

about 18 hours ago

DEADLINE

Scrap Metal Recycling Service Provider

Solicitation # BealeAFBMETAL

POSTED

about 18 hours ago

DEADLINE

OEM Parts Supply for Pierce Saber PumperThis subcontract, managed by the Department of Defense agency FA4686 9 Cons Pk, involves the procurement and delivery of genuine Original Equipment Manufacturer parts for a 2019 Pierce Saber Pumper. The scope of work focuses on sourcing authentic Pierce Manufacturing components specifically for the front and rear cab steps as well as the passenger rear cab to ensure the vehicle maintains its life-safety standards and OEM warranties. The contract is designated as a Total Small Business Set Aside under NAICS code 441310. All required components are to be delivered directly to the designated repair facility. The solicitation was posted on September 15, 2026, with a response deadline of September 24, 2026.

Automotive Parts and Accessories Stores

POSTED

DEADLINE

Low-Voltage Electrical Control for Motorized ShadesThis subcontract opportunity involves the installation of wiring and low-voltage control systems for motorized shade operators at Beale Air Force Base. Working under prime contractors for the Department of Defense, the selected provider will be responsible for delivering functional electrical power and control wiring in accordance with Division 26 and FAA-G-2100 standards for electronic equipment. The project is designated as a total small business set-aside under NAICS code 238210. Interested parties must submit their responses by September 21, 2026, for this requirement managed by the FA4686 9 Cons Pk agency office.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Window Shade Installation & DemolitionThis small business set-aside subcontract involves the removal of legacy window coverings and the installation of new custom-fit ATC tower shades at Beale Air Force Base. The scope of work includes site verification, the removal and off-base disposal of old fixtures, and the installation of new shades at ceiling heights of 12 feet. All work must be performed in strict accordance with UFC 4-133-01 and FAA-E-2470b standards. The project is managed under the Department of Defense through agency FA4686 9 Cons Pk, with the primary objective of delivering a fully commissioned window shade system and official disposal certification. The contract falls under NAICS code 238990 and requires a response by September 21, 2026.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Custom ATC Window Shade ManufacturingThis subcontract for the Department of Defense involves the manufacturing and supply of 24 custom-engineered transparent plastic solar control roller shades and associated mounting hardware for Air Force projects at Beale AFB. The materials must strictly adhere to FAA Master Specification Section 12 25 12 and FAA-E-2470b, ensuring compliance with ASTM D882, D1003, and D1044 standards regarding abrasion, haze, and tensile properties. The opportunity is designated as a total Small Business Set Aside under NAICS code 337920. Interested parties must respond by September 21, 2026, to provide these specialized window treatments for prime contractors operating within the 95903 zip code area.

Blind and Shade Manufacturing

POSTED

DEADLINE

9 OSS ATC Window Shades

Solicitation # FA468626QC011

Solicitation FA468626QC011 is a 100% small business set-aside request for quote for the procurement and turnkey installation of 24 custom-fit, FAA-approved transparent plastic window shades for the Air Traffic Control Tower at Beale Air Force Base, California. The project involves the removal and disposal of legacy shades that have degraded since 2017, which currently pose a flight safety hazard due to solar glare. All materials and installation must comply with FAA Master Specification Section 12 25 12, FAA-E-2470b, and FAA Order 6480.7D. The contractor must provide a mandatory five-year commercial warranty covering manufacturer defects such as peeling, bubbling, and mechanical failure. The performance period for delivery and installation is scheduled between September 30, 2026, and November 30, 2026, with all work executed within specified operational safety windows. Award will be based on a lowest price technically acceptable approach, evaluating offerors on technical acceptability—including FAA compliance, authorized dealer status, and ability to meet the installation timeline—and price reasonableness. Technical submissions are limited to five pages. The contract is a firm-fixed-price arrangement consisting of two line items: one for hardware and materials and one for installation and warranty. Payment will be processed through the Wide Area WorkFlow system, and delivery is established as FOB Destination.

Blind and Shade Manufacturing

POSTED

DEADLINE

ATC Window Shade Installation and Removal ServicesThis subcontract opportunity, titled ATC Window Shade Installation and Removal Services, is a total small business set-aside under NAICS code 238390 for the Department of Defense. The project involves working with prime contractors at Beale Air Force Base to remove and dispose of legacy window coverings and install new, custom-fitted window treatments using specified mounting hardware. The final objective is the delivery of a fully installed and operational window shade system. The work is located in the 95903 zip code area, specifically within the ATC tower environment, which requires personnel to have the ability to obtain necessary base access. Interested parties must respond by September 23, 2026, following the posting date of September 14, 2026.

Other Building Finishing Contractors

POSTED

DEADLINE

ATC Window Shade Equipment SupplierThis subcontract opportunity is for the supply of custom-manufactured window shades for prime contractors working on Air Force base projects, specifically targeting the Beale AFB ATC Tower. The supplier will produce primary shades using dark, heavy-duty F72 SR material and secondary shades using DS 8 SR material, ensuring all equipment is custom-fit and strictly adheres to FAA Regulation 6480.18 regarding safety, optical clarity, and visibility. Managed by the Department of Defense under agency FA4686 9 Cons Pk, this project is designated as a Total Small Business Set Aside under NAICS code 337920. The contract was posted on September 14, 2026, with a response deadline of September 23, 2026, for performance in the 95903 zip code area.

Blind and Shade Manufacturing

POSTED

DEADLINE

IDS/AACS Software Integration Specialist

Computer Systems Design Services

POSTED

DEADLINE

SCIF Network Infrastructure and Cabling Contractor

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS