Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Plumbing and Piping Systems Installation

Active

Federal

Response Deadline08/13/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the installation and testing of comprehensive plumbing and piping systems covering water supply, drainage, and gas piping under a subcontract arrangement. It is designated under the NAICS code 238220, which classifies it within the plumbing, heating, and air-conditioning contracting sector. The work is required to be performed at a location identified as FPO with ZIP code 96306-0001, indicating an overseas or military-affiliated site. The solicitation was posted on August 2, 2026, with responses due by August 13, 2026, and is managed by the Department of Defense under the Land Supply Chain organization. The nature of the work demands strict adherence to technical specifications for safety, functionality, and compliance, particularly given the inclusion of gas piping systems. All performance must meet the standards required for federal defense infrastructure projects.

General Info

Plumbing, drainage, and gas piping installation at FPO 96306-0001 for DoD under subcontract.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

238220 - Plumbing, Heating, and Air-Conditioning ContractorsView NAICS

Place of Performance

FPO, AP, 96306-0001, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 2

subcontract

Response DeadlineAug 13

Submission deadline

Response Deadline

08/13/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LAND SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LAND SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installation and testing of plumbing systems including water supply, drainage, and gas piping.

Similar Contracts

Same NAICS industry code

Plumbing and Piping Systems InstallationThe contract titled Plumbing and Piping Systems Installation pertains to the installation of comprehensive plumbing systems within buildings or facilities, specifically covering water supply, drainage, and gas piping infrastructure. It is issued as a subcontract under NAICS code 238220 and originates from the Massachusetts Executive Office of Housing & Livable Communities, with performance required in Boston, zip code 02114. The solicitation was posted on August 3, 2026, and responses must be submitted by August 17, 2026, at 10:00 PM Eastern Time. The awarding agency is located within the state of Massachusetts and the work is targeted at supporting housing and livable community initiatives in the Boston area. There is no set-aside classification specified for this opportunity.

OCDDEPT01 - Executive Office of Housing & Livable Communities

POSTED

about 10 hours ago

DEADLINE

ESJC – FIRE EXTINGUISHER SERVICES

Solicitation # esjc-fire-extinguisher-services

The ETR/Excelsior Springs Job Corps is seeking qualified small businesses to provide fire extinguisher services at its facility in Excelsior Springs, Missouri, under a solicitation titled ESJC – FIRE EXTINGUISHER SERVICES with the number esjc-fire-extinguisher-services. This opportunity is set aside for small businesses including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses as defined by the SBA. The NAICS code for this procurement is 238220, indicating it pertains to structural steel and precast concrete work related to fire protection systems. Bids must be submitted no later than August 14, 2026, at 12:00 PM CST, and all interested parties should contact Michael Bugner at bugner.michael@jobcorps.org or by phone at 816-629-3125 to obtain the official request for quotation and necessary documentation. The place of performance is specifically located in Missouri, and while the exact address is not provided in the data, the service must be performed at the Job Corps center at 701 St. Louis Ave, Excelsior Springs, MO 64024.

ETR/Excelsior Springs Job Corps

POSTED

about 12 hours ago

DEADLINE

IE JCC HVAC Replacements

Solicitation # ie-jcc-hvac-replacements

Management & Training Corp is seeking qualified small businesses to bid on HVAC replacement work under the IE JCC HVAC Replacements solicitation, which is not a direct Department of Labor contract but a subcontracting opportunity managed by MTC’s Inland Empire Job Corps. The solicitation is set aside exclusively for small business concerns including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business, as certified by the SBA. The North American Industry Classification System code is 238220 for HVAC installation, and the work is to be performed in California. Responses must be submitted by August 7, 2026, and the opportunity was posted on August 3, 2026. Point of contact for inquiries is Fran McGraw, reachable at frances.mcgraw@mtctrains.com.

MTC Inland Empire Job Corps

POSTED

about 12 hours ago

DEADLINE

Boiler replacement in IOOF and Administration

Solicitation # boiler-replacement-ioof-administration

Serrato Corporation DBA Flint Hills Job Corps is seeking a licensed HVAC contractor to replace three boilers across two buildings located in Kansas, under a solicitation titled Boiler replacement in IOOF and Administration. The opportunity is set aside for small businesses, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses, as defined by the SBA. The NAICS code for this procurement is 238220, indicating it falls under the plumbing, heating, and air-conditioning contracting category. The solicitation was posted on August 3, 2026, with a response deadline of August 13, 2026. Interested parties must submit their proposals prior to the deadline to be considered. Primary point of contact for inquiries is Gayle Kuckelman, reachable via email at kuckelman.gayle@jobcorps.org or by phone at 785-564-4910. All work is to be performed at the specified locations in Kansas, and contractors must possess the necessary licensing and expertise to handle the replacement of industrial-grade boilers in a facility setting.

Serrato Corporation DBA Flint Hills Job Corps

POSTED

about 12 hours ago

DEADLINE

Keystone Lincoln Dorm Water Heater Repair

Solicitation # keystone-lincoln-dorm-water-heater-repair

The contract seeks repair services for an existing water heater located in the Lincoln dormitory under the Adams & Associates Keystone Red Rock Job Corps program. The solicitation is designated as a small business set-aside, open exclusively to Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business concerns as certified by the SBA. The North American Industry Classification System code for the work is 238220, reflecting plumbing and heating contractor services. The response deadline is August 14, 2026, and the work must be performed at a location in Pennsylvania, though specific address details are not provided. Jennie Drumheller serves as the primary point of contact, accessible via phone at 570-708-0577 or email at drumheller.jennie@jobcorps.org for inquiries. The solicitation is posted on the SBA’s opportunity portal with the provided URL for further details.

Adams & Associates Keystone Red Rock Job Corps

POSTED

about 12 hours ago

DEADLINE

PCJCC HVAC Replacement Bldg Two

Solicitation # pcjcc-hvac-replacement-bldg-two

Exceed Corporation LLC, operating the Pinellas County Job Corps Center in St. Petersburg, Florida, is seeking qualified licensed HVAC contractors to replace two outdoor condenser units—one 20-ton and one 15-ton—on Building Two. The replacement units must utilize non-ozone depleting refrigerants such as R-32 or R-454B and comply with Energy Star efficiency standards to ensure environmental compliance and energy savings. This solicitation is specifically reserved for small business set-asides, including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business entities. The solicitation number is pcjcc-hvac-replacement-bldg-two, with a response deadline of August 7, 2026, and the NAICS code 238220 applies to the HVAC contracting scope. All bids must be submitted through the designated portal, and inquiries should be directed to Angelia Richardson at the provided contact information. The work is to be performed at the Job Corps Center location in Florida, and contractors must possess appropriate licensing and experience to execute the project according to the attached scope of work.

Exceed, LLC dba Pinellas County Job Corps Center

POSTED

about 12 hours ago

DEADLINE

2026-Maui-Dorm Exhaust Fans

Solicitation # 2026-maui-dorm-exhaust-fans

Management and Training Corporation, operator of the Hawaii Job Corps Center on Maui, is seeking qualified small businesses to provide plumbing, heating, and air conditioning services, specifically for the installation and replacement of dormitory exhaust fans at the facility. This solicitation, numbered 2026-maui-dorm-exhaust-fans, is open exclusively to small business concerns, with set-asides reserved for Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business entities as defined by the SBA. The NAICS code for this opportunity is 238220, indicating it falls under the HVAC contracting category. Responses are due by August 28, 2026, and the work must be performed in Hawaii, with no specific city or zip code provided beyond the state. Karllene Allen is the primary point of contact for inquiries, reachable via email or phone, and all submissions must be made through the SBA’s opportunity portal.

Management & Training Corporation

POSTED

about 12 hours ago

DEADLINE

HVAC Units Replacement in 3 dormitories

Solicitation # hvac-units-replacement-3-dormitories

Only vendors who attend the mandatory bid conference will have their bids considered for the replacement of HVAC units across three dormitories in Indiana. The project involves replacing 18 existing pad-mounted gas-fired Bryant packaged HVAC units—nine each on MLK and RFK—with new 12.5 SEER non-R22 units using refrigerants such as R-410A or R-454B. The existing units, installed in 2010 and 2000, serve four wings and a lounge area through a combination of packaged units and vertical up-flow gas furnaces with DX-coils. Contractors must reuse all existing electrical disconnects, ductwork, and thermostat wiring during installation. All removed units at locations 1094 and 1095 must be left at the maintenance building for parts recovery, and any recovered refrigerant must be properly labeled and delivered to maintenance personnel for reuse elsewhere. The solicitation is set aside for small businesses including SBA-certified categories such as SB, SDB, WOSB, HUBZone SB, VOSB, and SDVOSB under NAICS code 238220. Proposals are due by August 7, 2026, and the point of contact is Tammy Swallows at Adams & Associates, Inc.

Adams & Associates, Inc.

POSTED

about 12 hours ago

DEADLINE

HVAC Units Replacement in Culinary Arts

Solicitation # hvac-units-replacement-culinary-arts

Only vendors who attend the mandatory bid conference will have their submissions considered for this solicitation. The project involves replacing an existing 7.5-ton, gas-fired HVAC unit with DX-coils, manufactured by Bryant and installed in 2010, with a new 12.5 SEER packaged unit using modern refrigerants such as R-410A or R-454B. The replacement unit will provide cooling to the Classroom and Banquet Hall at the Culinary Arts facility in Indiana. The scope of work includes installing the new unit while reusing existing electrical disconnects, ductwork, and thermostat wiring. The solicitation is set aside for small businesses, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses under NAICS code 238220. Responses are due by August 7, 2026, and a site visit is scheduled for July 28, 2026, at 1:30 PM. All inquiries should be directed to Tammy Swallows at Adams & Associates, Inc.

Adams & Associates, Inc.

POSTED

about 12 hours ago

DEADLINE

Plumbing and Gas Line Repair

Solicitation # plumbing-gas-line-repair

The contract titled Plumbing and Gas Line Repair requires the selected contractor to correct all deficiencies in the plumbing and gas systems at the Earle C. Clements Job Corps Center in Kentucky to ensure full compliance with the International Plumbing Code and applicable safety standards. The contractor is responsible for providing all labor, materials, equipment, supervision, and incidental costs necessary to restore the systems into complete operating condition. The work must be performed to meet or exceed current regulatory requirements to ensure the safety and functionality of the facilities. This solicitation is designated as a small business set-aside under NAICS code 238220 and is open to Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business concerns. The solicitation was posted on August 3, 2026, with a response deadline of August 10, 2026. All inquiries should be directed to Miranda Wolfe, the primary point of contact, via email at wolfe.miranda@jobcorps.org or phone at 270-389-5579. The work will be performed exclusively at the Job Corps Center location in Kentucky, with no specified city or zip code provided for the site.

Earle C. Clements Job Corps Center

POSTED

about 12 hours ago

DEADLINE

HVAC Units Replacement @ Facility Engineering Building

Solicitation # hvac-units-replacement-facility-engineering-building

Only vendors who attend the mandatory bid conference will have their bids considered for this HVAC replacement project at the Facility Engineering Building in Indiana. The scope requires removal and replacement of an existing furnace with a faulty heat exchanger, along with the addition of a new 12.5 SEER condensing unit using modern refrigerants such as R-410A or R-454B, and the installation of a corresponding air conditioning system, AC disconnect, wiring, and a dedicated circuit breaker. A site visit is scheduled for July 28th, 2026 at 1:00 PM to allow bidders to assess the work location and requirements. The solicitation was posted on August 3rd, 2026 with a response deadline of August 7th, 2026. This procurement is set aside exclusively for small businesses as defined by the SBA, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses. The NAICS code is 238220, and all inquiries should be directed to Tammy Swallows at the provided contact information.

Adams & Associates, Inc.

POSTED

about 12 hours ago

DEADLINE

Propane Equipment Installation and MaintenanceThe contract requires the furnishing, installation, inspection, and ongoing maintenance of a propane system infrastructure at school facilities under the jurisdiction of the Cobb County Board of Education in Georgia. Scope of work includes all necessary components such as propane storage tanks, pressure regulators, piping networks, and associated safety systems to ensure reliable and compliant operation. The contractor must adhere to all applicable codes and standards during installation and provide routine inspections and preventive maintenance to safeguard facility operations and occupant safety over the life of the system. This is a subcontract opportunity with a NAICS code of 238220, indicating it falls under the plumbing, heating, and air-conditioning contracting category. The solicitation was posted on August 3, 2026, with a response deadline of August 31, 2026. Performance is expected to take place at various school sites within the Cobb County region, though specific locations are not detailed. The contract does not identify a specific point of contact and provides no set-aside information, suggesting it is open to general competition. All work must be completed in accordance with contractual obligations and safety regulations to support the educational environment’s energy needs.

Cobb County Board of Education

POSTED

about 13 hours ago

DEADLINE

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

Solicitation # SPE7L1-26-T-907C

The contract is for one roll of rubber strip, each roll measuring 50 feet, under the national stock number 5330-01-651-7290, with a purchase request number 7017709123. The item must be packaged and sealed in a medium duty, waterproof, greaseproof, and opaque bag in compliance with MIL-DTL-117, Type II, Class C, Style 1, to protect against ultraviolet degradation, and this packaging requirement applies to direct vendor delivery, foreign military sales, and stock shipments. The rubber strip must be free of asbestos, and any substituted material must be approved per Clause L30 and Provision 4 conditions. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions unless amended. The item falls under federal supply classifications 5330/5331 and must adhere to MIL-STD-130N for identification marking of U.S. military property. Covered defense information may apply, and government identification must be removed from non-accepted supplies. The solicitation number is SPE7L1-26-T-907C, with a response deadline of August 14, 2026, and delivery is required within 20 days after award. The contract is issued by the Department of Defense’s Land Supply Chain under NAICS code 339991, with the place of performance listed as FPO, ZIP 96660, and primary point of contact is Kristina Derry at krisitna.derry@dla.mil.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 11 hours ago

DEADLINE

BOOT, DUST AND MOIST

Solicitation # SPE7L1-26-T-907V

The contract pertains to the procurement of one unit of BOOT, DUST AND MOIST with NSN 5340-01-725-1393 under solicitation SPE7L1-26-T-907V, requiring delivery within five days of award at origin FOB terms with zero variance in quantity. All items must comply with MIL-STD-2073-1E packaging standards, including specific preservation methods, material codes, and unit container markings per MIL-STD-129, with no special marking required. Packaging must adhere to DLA’s official requirements, and palletization must follow RP001 guidelines. The product is subject to strict prohibitions against ozone-depleting chemicals, and any substitutions must be pre-approved unless expressly allowed by specifications. The item must be shipped via the fastest traceable means, excluding parcel post, to the designated delivery point at Sierra Army Depot in Herlong, California. The contractor must meet all identification and marking requirements per MIL-STD-130N, and the contract incorporates technical and quality standards referenced in the DLA Master List. This is a federal procurement under NAICS 332510 with no set-aside classification, and all data including shipment tracking, point of contact, and contract deadlines are encoded within the DLA systems for compliance and audit purposes.

Hardware Manufacturing

POSTED

about 11 hours ago

DEADLINE

NUT, SELF-LOCKING, EXTEN

Solicitation # SPE7L1-26-T-906Y

The contract specifies the procurement of two self-locking hexagon nuts with an extended washer, identified by NSN 5310-01-598-8901 and part numbers 92461A200 and 3931486C1, classified as a commercial off-the-shelf item. Delivery is required within five days FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, subject to precedence by DLA’s Master List of Technical and Quality Requirements, and palletization must adhere to DLA packaging standards. The shipment must be sent via traceable means, excluding parcel post, to Fort Bliss, Texas, with mandatory markings per the designated point of contact and shipment identifiers. Ozone-depleting chemicals are strictly prohibited, and any substitute materials require prior approval unless explicitly authorized. The contract is issued under solicitation SPE7L1-26-T-906Y with a response deadline of August 14, 2026, and the required delivery date is July 31, 2026. The unit price is $2.00 per piece, totaling $4.00, and the contracting office is under the Department of Defense’s Land Supply Chain, with Kristina Derry as the primary point of contact.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 11 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-908A

The contract includes a requirement for 56 units of a Commercial Off the Shelf (COTS) item identified as E Z LOADER BOAT TRAILERS, INC. with part number 250-017565 and NSN 5340017008576, priced at $56.00 per unit, for a total value of $3,136. Delivery is due within 20 days FOB origin, with no variance allowed in quantity, and both inspection and acceptance occur at the origin point. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and unit container specifications, while marking follows MIL-STD-129 with no special markings required. Palletization adheres to DLA’s packaging requirements, and the item must be shipped via the designated freight forwarder, V. ALEXANDER CO INC, to the provided shipping address. The solicitation is issued under contract number SPE7L1-26-T-908A with a response deadline of August 14, 2026, and is managed by the Department of Defense’s Land Supply Chain under NAICS code 332510. Technical and quality standards referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size.

Hardware Manufacturing

POSTED

about 11 hours ago

DEADLINE

STARTER, ENGINE, ELEC

Solicitation # SPE7L1-26-T-907W

The contract pertains to the procurement of a starter, engine, electrical component with NSN 2920-01-470-9867, issued by the Defense Logistics Agency under solicitation SPE7L1-26-T-907W. Four separate line items each specify one unit at a unit price of $1.00, with delivery required within five days FOB origin, zero quantity variance allowed, and inspection and acceptance occurring at the destination. The item must be packaged in strict compliance with MIL-STD-2073-1E, including preservation method 41, wrapping with specified material protected from direct tape contact, containment in a vapor-proof barrier bag with heat-sealed closure, and cushioning using weather-resistant fiberboard die-cut inserts designed to immobilize the product, prevent container collapse, and evenly distribute weight to safeguard solder joints and structural elements. The outer container must be reinforced corrugated fiberboard certified by the manufacturer, labeled per MIL-STD-129 with special marking code ZZ indicating an up arrow and “Open This Side,” and palletized according to DLA packaging requirements. Mercury and mercury compounds are strictly prohibited in any phase of preservation or packaging. The product must arrive in serviceable condition and be shipped via traceable freight, with parcel post prohibited. Shipments are directed to two distinct DoD addresses: one at Lewis McChord, Washington for three line items and another at Fort Bliss, Texas for one. Required delivery dates range from March to July 2026, and the contracting office is the Land Supply Chain under the Department of Defense, with Kristina Derry as the primary point of contact.

Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

about 11 hours ago

DEADLINE

HOUSING, PANEL, VEHIC

Solicitation # SPE7L1-26-T-907J

This contract pertains to the procurement of a housing panel for vehicle applications under solicitation SPE7L1-26-T-907J, with the NSN 2510-01-687-5387 and a single unit of issue (AY). The item must be delivered within 20 days to a military vessel shipment address at FPO AP 96694-7100, with delivery terms as FOB origin and inspection and acceptance occurring at destination. No quantity variance is permitted. All packaging and labeling must comply with ASTM D3951 and MIL-STD-129, and palletization must adhere to DLA’s packaging requirements, with the DLA Master List of Technical and Quality Requirements taking priority over any conflicting standards. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by specification. The contract mandates shipment via the fastest traceable means, explicitly prohibiting parcel post, and directs vendors to use the VSM system for routing. The required delivery date is July 28, 2026, and specific tracking details including transport control number, RDD, project code, and signatory are provided for logistical execution. All specifications are bound to the DLA procurement policies, and the point of contact is Kristina Derry at the Department of Defense’s Land Supply Chain.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 11 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-906P

This contract, identified by solicitation number SPE7L1-26-T-906P, is issued by the Department of Defense through the Land Supply Chain under the DLA for the procurement of a single unit of a BLOCK, PIVOT component with NSN 2825-00-385-9399, tied to Siemens Energy part numbers including B30742, E16592PC29, E16593PC30, G8788PC46, G9098-1PC45, G9098PC45, G9181PC46, and M271R. The item must be delivered within five days of contract award, FOB origin, with zero variance in quantity, and is subject to strict packaging standards per ASTM D3951, superseded where applicable by the DLA Master List of Technical and Quality Requirements. All packaging and labeling must comply with MIL-STD-129, and palletization must adhere to RP001 requirements. The use of Class I ozone-depleting chemicals is absolutely prohibited, and any substitute materials require prior approval unless explicitly authorized by the specification. The delivery destination is SWEIHAN AIR BASE in AE, with the shipment tagged for RDD 999/NMCS and governed by DLA procurement notes C19 and C20 regarding transportation and first destination transfers. The required delivery date is July 31, 2026, and inspection and acceptance will occur at the destination. Technical compliance is mandatory, and all government-specific identifiers must be removed from non-accepted supplies. The contract is managed under a federal acquisition framework, with Kristina Derry as the primary point of contact.

Turbine and Turbine Generator Set Units Manufacturing

POSTED

about 11 hours ago

DEADLINE

COVER, HANDLE, DOOR, V

Solicitation # SPE7L1-26-T-907Y

This contract pertains to the procurement of a cover, handle, and door component for vehicular applications, identified by NSN 2540-01-428-6195 and purchase request 7012536527, with a quantity of 1,755 units to be delivered within 90 days from the contract award. The item is designated as a critical application component and must be manufactured using a metal casting process requiring specific tooling; sourcing and engineering support are available through DLA’s Aviation or Land & Maritime Supply Chains. The item must comply with stringent technical and quality requirements drawn from the DLA Master List, with verification levels and acceptable quality levels mandated for critical, major, and minor attributes. Zero non-conformances are required in sampling per MIL-STD-1916 or equivalent zero-based plans, and a Certificate of Conformance is mandatory. Ozone-depleting chemicals are strictly prohibited, and any substitute materials require prior approval. Packaging must conform to MIL-STD-2073-1E, marking to MIL-STD-129 with no special codes, and palletization must follow DLA packaging standards. The item is to be delivered FOB origin with no quantity variance allowed, inspected and accepted at the point of origin. The delivery destination is DLA Distribution Red River in Texarkana, TX, with a required ship date of January 8, 2026. The contract is governed by DLA-specific requirements including configuration change management, inspection protocols, and hazardous materials handling procedures, and was solicited under SPE7L1-26-T-907Y with responses due by August 14, 2026.

Other Motor Vehicle Parts Manufacturing

POSTED

about 11 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-906R

The contract pertains to the supply of a gasket identified by NSN 5330-01-610-9969 and part number L100212, with a single unit requirement to be delivered within five days of order placement. The item must be packaged in a medium-duty, waterproof, greaseproof, and opaque bag conforming to MIL-DTL-117, Type II, Class C, Style 1, to protect against UV deterioration, and this packaging requirement applies to all delivery types including direct vendor delivery, foreign military sales, and stock shipments. No asbestos is permitted, and mercury or mercury-containing compounds are strictly prohibited unless specifically exempted for functional uses such as batteries, fluorescent lights, sensors, weapon systems, or naval-referenced chemical reagents; when exempted, portable devices must include a secondary containment barrier and meet NAVSEA 5100-003D standards. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, with special marking code 20-20 indicating “Do Not Bend,” and palletization must adhere to DLA packaging requirements. The delivery point is FOB origin, with inspection and acceptance occurring at destination, and zero tolerance for quantity variance. The contract prohibits parcel post shipping; transportation must use the fastest traceable method, with delivery addressed to the Fleet Readiness Center Aviation Support Equipment in Solomons, Maryland. The purchase request number is 7017706951, with an original required delivery date of July 31, 2026, and the contract is issued under solicitation SPE7L1-26-T-906R, governed by DLA’s Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue or award date depending on acquisition size.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 11 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-906X

This contract involves the procurement of a gasket with NSN 5330-01-603-2748 and part number 119810-13110 from YANMAR AMERICA CORPORATION, requiring one unit to be delivered within five days of award under solicitation SPE7L1-26-T-906X. The item must comply with stringent packaging standards specified in MIL-DTL-117, TYPE II, CLASS C, STYLE 1, including medium-duty, waterproof, greaseproof, and opaque packaging, and is excluded from the First Destination Packaging Program and standard commercial packaging due to its sensitivity and specifications. No asbestos is permitted as defined by FED-STD-313, and packaging, marking, and shipping must adhere to MIL-STD-2073-1E and MIL-STD-129 with no special marking required. The item must be shipped FOB origin to the designated delivery point at Camp Shelby, Hattiesburg, MS, using traceable freight methods and avoiding parcel post, with shipment designated as RDD/NSCS and tied to project TP 1. The contract defines a zero percent quantity variance and requires inspection and acceptance at destination, with the unit of issue as each. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced at the official DLA website. The contract's performance and compliance are overseen under DLA Land Supply Chain, with Kristina Derry as the primary point of contact.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 11 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-907X

The contract pertains to a single non-NSN item with CAGE code 62100 and part number 15047488, supplied by KOPPERS CO INC CONTAINER MACHINERY DIVISION located in Glen Arm, Maryland. The item is required in a quantity of one unit, with a total price based on a unit price for a single ea. Delivery is specified to be completed within five days of contract award, with FOB destination as the delivery term, meaning the supplier assumes all risk and cost until the item reaches the designated destination. Inspection and acceptance both occur at the destination, with no variance allowed in quantity—zero percent plus or minus. Packaging must comply with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, and labeling must follow MIL-STD-129. Packaging must be palletized per RP001 DLA Packaging Requirements for Procurement, with the unit of issue and quantity per unit pack as defined in the contract. The delivery address is N62792 CVN/SSN MATERIAL SUPPORT at 500 West Park Lane, Hampton, VA 23666-5027, and shipment must be sent by the fastest traceable method; parcel post is strictly prohibited. The required delivery date is August 3, 2026, with no need ship date specified, and the solicitation number is SPE7L1-26-T-907X. The contracting office is under the Department of Defense, Land Supply Chain, and the primary point of contact is Darrell Pannell. For government use, the item is identified with DIC A3B, funding code XP, and project code ON9 TP 1.

All Other Miscellaneous Manufacturing

POSTED

about 11 hours ago

DEADLINE

SHAFT, STRAIGHT

Solicitation # SPE7L1-26-T-906Q

The contract is for the procurement of one straight shaft with NSN 3040-01-491-3925 under solicitation number SPE7L1-26-T-906Q, with a required delivery within five days of award. The item is part of a full and open competition managed by the Department of Defense through the Land Supply Chain, and the offeror must be a Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization. Covered Defense Information applies, and the supplier is prohibited from using any Class I ozone-depleting chemicals in the manufacturing or incorporation of the part; any substitute chemicals require prior approval unless explicitly authorized by specifications. Complete technical data packages, including data for both approved and alternate parts, must be provided if Table A0648 is referenced. The place of performance is Portsmouth, with a zip code of 03801-5000. Responses are due by August 14, 2026, and the solicitation was posted on August 3, 2026. The primary point of contact for inquiries is Kristina Derry, reachable via email and phone provided.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 11 hours ago

DEADLINE