Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Solicitation opportunity from Department Of Defense was posted on January 10, 2022. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

PM and Calibration of Microhardness

Closed
FA812622Q0019Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310
New
SLED
Bus Fire Suppression System Maintenance
Solicitation # WMATA-0000010906
The Washington Metropolitan Area Transit Authority is seeking proposals for the maintenance of bus fire suppression systems under solicitation number WMATA-0000010906. This procurement falls under NAICS code 811310 and is managed through the agency's Virginia operations. The solicitation was posted on October 29, 2026, and requires all responses to be submitted by the deadline of November 4, 2026. Interested parties can access further details and manage their bids through the official WMATA supplier portal.
Washington Metropolitan Area Transit Authority

POSTED

about 3 hours ago

DEADLINE

in 6 days
NAICS: 811310
New
Kubota M8200 Clutch Replacement
Solicitation # kubota-m8200-clutch-replacement
Management and Training Corporation is soliciting lump sum fee proposals for the clutch replacement of a Kubota M8200 tractor with front wheel assist, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires a qualified contractor to provide all transportation, labor, materials, and equipment to diagnose and repair the clutch assembly and power take-off system. Key technical requirements include replacing friction discs, bearings, oil seals, and O-rings, resurfacing the flywheel, and replacing hydraulic pipes and filters as needed. The contractor must perform all work according to manufacturer specifications and provide a final summary of diagnostic findings, an itemized list of replaced parts, and warranty documentation upon completion. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified entities. Bids must be submitted via email to Angie Mahoney by 3:00 PM CST on November 3, 2026, and must include a bid sheet, proof of insurance, a completed supplier packet with a W-9, and applicable SBA certification letters. Award decisions will be based on best value, with a focus on administrative compliance and technical qualifications. The contract is subject to various Federal Acquisition Regulations, including standards for combating trafficking in persons, Buy American restrictions, and Service Contract Labor Standards per Wage Determination 2015-4687 Revision 31 for Kentucky.
Earle C. Clements Job Corps Center

POSTED

about 3 hours ago

DEADLINE

in 5 days
NAICS: 811310
New
SLED
Kubota Attachment Installation and Calibration
Department of Blind and Vision Impaired

POSTED

about 4 hours ago

DEADLINE

in 7 days
NAICS: 811310
New
SLED
CIPP Lateral Reinstatement
Augusta County Service Authority dba Augusta Water

POSTED

about 4 hours ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
Well Pumping Assembly Inspection and Shop Repair
Water Production

POSTED

about 4 hours ago

DEADLINE

in 20 days
NAICS: 811310
New
SLED
ANNUAL ROTATING EQUIPMENT INSPECTION, TESTING, REPAIR, RECONDITIONING AND STORAGE SERVICES
Solicitation # 2026-RFP-130
Solicitation 2026-RFP-130, issued by the City of Lakeland, seeks qualified contractors to provide annual inspection, testing, repair, reconditioning, and storage services for critical rotating equipment at the McIntosh and Larsen Power Plants. The scope of work covers a wide range of industrial machinery, including low- and medium-voltage AC and DC electric motors, as well as circulating water and condensate pumps. Required services include clean inspect test (CIT) procedures, troubleshooting, motor rewinding, machining, welding, and dynamic field balancing. The contractor is also responsible for the pickup, transportation, and secure indoor storage of equipment, ensuring strict preservation measures such as periodic shaft rotation and moisture control to prevent corrosion and damage. The selection process is based on a points-based criteria to identify the vendor most responsive to the city's needs. Proposers must submit their responses via the OpenGov portal by October 30, 2026, and provide essential documentation including a signed W-9, Sunbiz registration, a notarized indemnification agreement, and a human trafficking affidavit. Contractors must adhere to strict safety standards, including OSHA compliance and specific certification for crane operations and critical lifts. Furthermore, vendors are required to maintain insurance policies with AM Best ratings of no less than A and must undergo a safety audit covering EMR and employee training records to ensure compliance with city risk management standards.
LE - Production - MPP

POSTED

about 7 hours ago

DEADLINE

in 8 days
NAICS: 811310
New
Federal
Marine Mechanical Systems Repair
CG-SEA-C22

POSTED

about 7 hours ago

DEADLINE

in 25 days
NAICS: 811310
New
Federal
On-Call Ad-Hoc Elevator Inspections
257-NETWORK Contract Office 17 (36C257)

POSTED

about 7 hours ago

DEADLINE

in 11 days
NAICS: 811310
New
Federal
Specialized Five-Year Elevator Full-Load Testing
257-NETWORK Contract Office 17 (36C257)

POSTED

about 7 hours ago

DEADLINE

in 11 days
NAICS: 811310
New
Federal
Semi-Annual and Annual Elevator Inspection Services
257-NETWORK Contract Office 17 (36C257)

POSTED

about 7 hours ago

DEADLINE

in 11 days
NAICS: 811310
New
International
Fuel Dispenser Technical Installation & RepairThis subcontract for Fuel Dispenser Technical Installation and Repair involves the physical replacement and calibration of damaged parts within Tatsuno dispensing units for prime contractors working on Pakistan State Oil Company Ltd projects in Pakistan. The scope of work includes removing damaged components, installing new parts, testing for leaks, and utilizing specialized calibration equipment and fuel-safe tools to ensure accurate fuel measurement and fully operational units. To qualify for this engagement, providers must hold technical certification for Tatsuno equipment and adhere to ATEX/IECEx hazardous area safety standards. The opportunity was posted on October 29, 2026, with a response deadline of November 4, 2026, falling under NAICS code 811310.
Pakistan State Oil Company Ltd

POSTED

about 9 hours ago

DEADLINE

in 6 days
NAICS: 811310
New
International
RFP RF-32079-AS (Replacement of Damaged Parts of Tatsuno Dispensing Unit at NVRO, BWP Division)
Solicitation # RF-32079-AS
Solicitation RF-32079-AS is issued by the Pakistan State Oil Company Ltd for the replacement of damaged parts of a Tatsuno dispensing unit located at NVRO within the BWP Division. This procurement opportunity was posted on October 29, 2026, with a response deadline set for November 4, 2026, at 09:15. The place of performance for these services is located in Pakistan. The primary point of contact for this solicitation is Arslan Sajjad, who can be reached via email at [email hidden]. While the solicitation is hosted on the Ariba portal, specific details regarding pricing, evaluation factors, and the detailed statement of work were not provided in the available metadata.
Pakistan State Oil Company Ltd

POSTED

about 9 hours ago

DEADLINE

in 6 days

General Info

Agency

Department Of Defense → FA8126 Afsc Pzimb

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

OK

Set-Aside

NONE

Documents

2

CSS_FA812622Q0019.pdf

PDF

PWS_10Jan2022.docx

DOCX

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

2 updates
PhaseClosed
Posted

Solicitation

Notice updated

The notice description changed.

Notice updated

Notice details unchanged. Attachments may have changed.

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA8126 Afsc Pzimb
Contacts2 people available
OfficeTINKER AFB, OK, 73145-3305, USA
Organization / AgencyDepartment Of Defense → FA8126 Afsc Pzimb
Office AddressTINKER AFB, OK, 73145-3305, USA
Contacts
Autumn James
contact@example.gov
+1 (555) 000-0000
Jocelyn Johnson
contact@example.gov

Full Description

Show more
The purpose of this amendment is to correct the Performance Work Statement attached to this solicitation posting. This is a combined synopsis/solicitation notice for the procurement of PM and Calibration of two (2) LECO Microhardness Testers. This requirement is Sole Source for LECO Corporation (CAGE: 94174). FOB Destination is Tinker AFB OK. Please make sure all provisions and clauses are appropriately filled in (where applicable), when submitting your quote. Please send the actual solicitation completed along with any other documentation to support your company's quote. Please make sure information stated is readable and legible. This is a Firm Fixed Price procurement, so please state the price on your quote as all inclusive (i.e. shipping, taxes, fees, etc.) Quotes will be accepted on or before the closing date stated on page 1 of the solicitation. When returning this Standard form 1449, please complete the following: 1. Please complete the Vendor Information, Pricing Information, and Proposed Delivery Date on page 2. 2. Please - wet sign, put the name, title of signer, and date signed on page 2. 3. Please insert unit price and total amount on page 3. 4. Please complete information in all the following - Fill-in provisions and clauses: CLAUSE/PROVISION Page Number FAR 52.209-11 22 FAR 52.204-24 36 FAR 52.204-26 12 DFARS 252.204-7016 20 DFARS 252.204-7017 (if necessary) 63 FAR 52.212-3 (as required) 37 FAR 52.222-25 63 5. Please provide a written statement to explain how your company is going to meet the technical evaluation criteria listed in FAR Clause 52.212-2.

More opportunities from Department Of Defense → FA8126 Afsc Pzimb

Same awarding agency

NAICS: 423830
New
Federal
Trumpf/Pilz OEM Replacement Parts SupplierThis subcontract involves the supply of Original Equipment Manufacturer components for prime contractors supporting Air Force Sustainment Center projects. The scope specifically requires the sourcing of Trumpf interface components and Pilz safety modules in accordance with established TT&E reports, with all certified parts to be delivered to Tinker AFB. The agreement mandates strict adherence to military standards, specifically MIL-STD-130 for unique item identification and MIL-STD-129 for packaging and shipment labeling. Managed under NAICS code 423830 for the Department of Defense, the contract ensures that all critical safety and interface hardware meets rigorous government specifications for sustainment operations.
Industrial Machinery and Equipment Merchant Wholesalers

POSTED

2 days ago

DEADLINE

in 8 days
View Details
NAICS: 811210
New
Federal
Pilz Safety Controller Reprogramming ServicesThis subcontract for Pilz Safety Controller Reprogramming Services supports prime contractors on Air Force Sustainment Center projects under the Department of Defense. The scope of work involves the specialized programming and configuration of integrated Pilz safety controllers, specifically focusing on validation and integration with Trumpf TrumaBend V170X hardware. Key technical requirements include conducting Test, Teardown, and Evaluation (TT&E) and the recovery of lost original programs using proprietary Pilz software. The selected provider must ensure strict adherence to DFARS 252.204-7012 compliance standards. Final deliverables for the project consist of a fully programmed controller and a comprehensive TT&E evaluation report. The opportunity is categorized under NAICS code 811210, with a response deadline of November 6, 2026.
Electronic and Precision Equipment Repair and Maintenance

POSTED

2 days ago

DEADLINE

in 8 days
View Details
NAICS: 811210
New
Federal
Trumpf Pilz Programming Service
Solicitation # FA812627Q0003
The Air Force Sustainment Center at Tinker Air Force Base, Oklahoma, is seeking a Firm-Fixed-Price contract for a one-time programming service to reprogram and configure the integrated Pilz safety controller for a Trumpf TrumaBend V170X, serial number B0105A0093. The contractor is required to perform Test, Teardown, and Evaluation on the part and submit an evaluation report to the government within one business day. The period of performance for this service is scheduled from November 15, 2026, to November 14, 2027. Award decisions will be based on a technical proposal and cost/price evaluation, with a 10 percent price preference granted to HUBZone small business concerns. The contractor must comply with strict packaging and marking standards, including MIL-STD-130 for unique item identification and MIL-STD-129 for shipment labeling. Additionally, the contractor must adhere to cybersecurity reporting under DFARS 252.204-7012 and provide all necessary quality control and inspection manuals. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system.
Electronic and Precision Equipment Repair and Maintenance

POSTED

2 days ago

DEADLINE

in 8 days
View Details
NAICS: 541380
Federal
Independent Calibration & Certification Services (Future Potential)The contract pertains to independent calibration and performance certification of electron microscopes using traceable standards, intended for potential future use should the government elect to pursue depot-level maintenance or open the requirement to competition. This service is critical to ensuring the accuracy and reliability of electron microscope operations, with all calibrations tied to nationally or internationally recognized traceable standards to guarantee measurement integrity. The work is linked to a NAICS code of 541380, indicating it falls under scientific and technical consulting services, and is managed by the Department of Defense under the office FA8126 Afsc Pzimb, with performance expected to occur in the 73145 zip code area. Although currently listed as a subcontract opportunity with no solicitation number or set-aside details, it remains a pending requirement that may be activated based on future maintenance strategies or competitive bidding decisions.
Testing Laboratories and Services

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 541715
Federal
On-Site Technical Support for Precision Laboratory InstrumentsThe contract is for on-site technical support services focused on high-maintenance scientific instruments located at government facilities, with a primary emphasis on emergency repairs, troubleshooting, and performance validation. Services are required to be provided on-call and in-person to ensure continuous operational readiness of precision laboratory equipment critical to defense-related research and testing activities. The work is governed under NAICS code 541715, indicating it falls under scientific research and development services, and is structured as a subcontract within the broader framework of the Department of Defense’s procurement system. The place of performance is identified as a facility in Oklahoma City, Oklahoma, with a ZIP code of 73145, suggesting the support must be delivered directly at that location. The contract was posted on July 28, 2026, and is managed under the FA8126 Afsc Pzimb office, indicating oversight by a U.S. Air Force contracting entity. While no solicitation number is provided, the UI link directs to the SAM.gov portal for official documentation and submission purposes. The requirement implies a high degree of technical expertise, rapid response capability, and clearance to work in secure government environments. There is no set-aside designation specified, meaning participation is open to all qualified contractors without restrictions based on size or socioeconomic status. All support must meet stringent standards for instrument accuracy, safety, and uptime to sustain mission-critical operations.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 334517
Federal
High-Precision Diagnostic Equipment Parts SupplyThe contract entails the supply of authentic, JEOL-certified replacement and maintenance parts for the JSM-IT300LV scanning electron microscope, covering critical components such as electron optics, vacuum seals, detectors, and control boards, ensuring continued operational integrity and performance fidelity. All parts must meet stringent quality and authenticity standards as validated by JEOL, with delivery and installation aligned to support uninterrupted use in high-precision diagnostic applications. Performance is required at a location with ZIP code 73145, under the oversight of the Department of Defense’s FA8126 Afsc Pzimb office, and the contract is classified as a subcontract within the NAICS code 334517 for other electronic instrument manufacturing. The posting date indicates the opportunity was issued in 2026, and though no solicitation number is provided, the official listing can be accessed through the SAM.gov platform via the specified URI. The agreement emphasizes compliance with certified OEM specifications to maintain system calibration, safety, and resolution standards critical to defense-related research and analysis.
Irradiation Apparatus Manufacturing

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 811210
Federal
OEM Preventative Maintenance & Calibration ServicesThe contract entails biannual on-site preventative maintenance and calibration services for a JEOL JSM-IT300LV scanning electron microscope, performed using proprietary tools, specialized software, and authentic original equipment manufacturer parts to guarantee optimal performance, measurement accuracy, and long-term reliability. All service activities must be conducted at the designated location in Oklahoma City, with a zip code of 73145, ensuring minimal downtime and uninterrupted operational readiness for critical applications. Services are provided under a subcontract classification within the NAICS code 811210, which pertains to electronic equipment repair and maintenance, and are managed by the Department of Defense through the FA8126 Afsc Pzimb office. The work is scheduled to occur twice per year on a fixed cycle, with compliance and quality control ensured through adherence to manufacturer-specified protocols and the exclusive use of OEM components. The contract was posted on July 28, 2026, and all servicing must align with the technical requirements specified by the equipment manufacturer to maintain system precision and warranty integrity.
Electronic and Precision Equipment Repair and Maintenance

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 541611
Federal
Technical Documentation and Reporting ServicesThis contract, titled Technical Documentation and Reporting Services, is a small business set-aside subcontract under the SBA Total Small Business Set-Aside program, with a NAICS code of 541611 for Management Consulting Services. The work involves preparing and submitting detailed service reports, compliance documentation, and certified technician credentials, while also managing electronic invoicing through the Wide Area Workflow system and maintaining complete, audit-ready records to ensure full regulatory adherence. Performance is required at the location in Coffeyville, Kansas, with a zip code of 73145, and the contract is associated with the Department of Defense, specifically under the agency identifier FA8126 Afsc Pzimb. The opportunity was posted on July 28, 2026, and bidders must be designated as small businesses to qualify, with all submissions and recordkeeping expectations aligned with federal compliance standards.
Administrative Management and General Management Consulting Services

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 423490
Federal
Supply of OEM Replacement Parts for SEMThe contract is a total small business set-aside under the SBA program for the supply of genuine JEOL or approved-equivalent replacement components essential for the maintenance of scanning electron microscopes. It covers a broad range of parts including filaments, detectors, gaskets, vacuum pumps, control boards, and associated software licenses, ensuring uninterrupted operational capability of SEM equipment. The procurement is classified under NAICS code 423490 and is designated as a subcontract, indicating it supports a larger prime contract or program. Performance of the contract is required at a location in Coffeyville, Kansas, with a zip code of 73145, and the responsible agency is the Department of Defense under the FA8126 Afsc Pzimb office. Although specific details such as contract value, duration, or point of contact are not provided, the posting date of July 28, 2026, suggests this is a future solicitation with a focus on securing reliable, certified components from small business suppliers. The intent is to maintain the integrity and performance of critical defense-related SEM systems through genuine or equivalent replacement parts, ensuring compliance with technical and supply chain requirements.
Other Professional Equipment and Supplies Merchant Wholesalers

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 811212
Federal
Preventative Maintenance Services for Scanning Electron Microscope (SEM)The contract engages a qualified vendor to perform two annual preventative maintenance service calls on a JEOL JSM-IT300LV Scanning Electron Microscope, ensuring optimal performance and prolonged equipment lifespan. Each service visit includes a comprehensive inspection, precise calibration, thorough cleaning, component testing, replacement of any worn or degraded parts, and full operational verification to confirm the instrument meets all manufacturer specifications. These services are critical for maintaining the accuracy, resolution, and reliability of the SEM, which supports key scientific and technical operations. The contract is structured as a subcontract under a Total Small Business Set-Aside classification, reserved exclusively for small businesses as defined by the SBA, and falls under NAICS code 811212 for industrial and commercial machinery and equipment repair and maintenance. It is issued by the Department of Defense through the FA8126 Afsc Pzimb office, with performance required at the location in Coffeyville, Oklahoma, ZIP 73145. The solicitation was posted on July 28, 2026, and all work must be conducted in compliance with federal contracting standards, emphasizing quality, timeliness, and adherence to technical protocols outlined for the specific SEM model.
Computer and Office Machine Repair and Maintenance

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 518210
Federal
Data Integrity and Long-Term Storage SupportThe contract requires the implementation and validation of secure data management systems designed to preserve the integrity of FESEM data over a seven-year period, specifically to support legal and forensic applications in mishap investigations and failure analysis. The systems must ensure that all collected data remains unaltered, traceable, and accessible for official use, meeting rigorous standards for authenticity and reliability in high-stakes technical and judicial contexts. This involves deploying authenticated storage protocols, audit trails, and tamper-resistant mechanisms to safeguard against data corruption or unauthorized modification throughout the retention period. Performance is to be conducted at a location in Coffeyville, Oklahoma, under a subcontract classification administered by the Department of Defense through the FA8126 Afsc Pzimb office. The work falls under NAICS code 518210, indicating it pertains to data processing, hosting, and related services. Although the solicitation number and point of contact are not provided, the contractual obligation is clear: deliver a compliant, auditable infrastructure capable of supporting long-term data integrity for forensic and legal evidentiary purposes without deviation or compromise.
Computing Infrastructure Providers, Data Processing, Web Hosting, and Related Services

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 611430
Federal
Operator Training and Technical DocumentationThis contract requires the provision of comprehensive technical training for Air Force personnel focused on the operation of field emission scanning electron microscopes FESEM the use of Oxford analytics software correlative microscopy techniques and routine maintenance procedures. The training must be delivered in a structured and effective manner to ensure personnel achieve full operational proficiency and are capable of independently performing advanced analytical tasks. Alongside hands-on instruction the contractor is responsible for developing detailed standard operating procedures and technical manuals that serve as enduring reference materials to support consistent and safe usage of the equipment across multiple operational contexts. All training and documentation efforts must be conducted at the designated performance location in Coffeyville Oklahoma with the zip code 73145 and align with the North American Industry Classification System code 611430 which corresponds to other professional and technical training services. The contract is structured as a subcontract under the Department of Defense with oversight from FA8126 Afsc Pzimb and is posted on SAM gov with an original posting date of June 18 2026. The scope emphasizes not only immediate workforce readiness but also the long term sustainability of technical capabilities through clearly documented protocols and user centered guides.
Professional and Management Development Training

POSTED

4 months ago

DEADLINE

N/A
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 811310
Awarded
Federal
Tanker Purge Services in Illinois, Indiana, Michigan & Ohio
Solicitation # W911SA-22-Q-3016
W6QM Micc Ft Mccoy (rc)

POSTED

almost 5 years ago

CLOSED

almost 5 years ago
View Details
NAICS: 811310
Closed
Federal
Paint Booth Maintenance Bldg 72 & Bldg 455
Solicitation # PaintBoothReCompete
FA2823 Aftc Pzio

POSTED

almost 5 years ago

CLOSED

over 4 years ago
View Details
NAICS: 811310
Awarded
Federal
Tanker Purge Services in Iowa, Minnesota, & Wisconsin
Solicitation # W911SA-22-Q-3015
W6QM Micc Ft Mccoy (rc)

POSTED

almost 5 years ago

CLOSED

almost 5 years ago
View Details
NAICS: 811310
Awarded
Federal
OPEN, INSPECT AND REPORT TURBOCHARGER WMEC-210B
Solicitation # 70Z08022QAF038
Sflc Procurement Branch 1(00080)

POSTED

almost 5 years ago

CLOSED

almost 5 years ago
View Details
NAICS: 811310
Awarded
Federal
J065--666 New Challenge Course inspection
Solicitation # 36C25922Q0103
Network Contract Office 19 (36C259)

POSTED

almost 5 years ago

CLOSED

almost 5 years ago
View Details
NAICS: 811310
Closed
Federal
Crane Services SATOC
Solicitation # W9128F22SM028
W071 Endist Omaha

POSTED

almost 5 years ago

CLOSED

almost 5 years ago
View Details
NAICS: 811310
Closed
Federal
J030--Generator Maintenance
Solicitation # 36C24122Q0193
241-NETWORK Contract Office 01 (36C241)

POSTED

almost 5 years ago

CLOSED

almost 5 years ago
View Details
NAICS: 811310
Closed
Federal
H312--FY22: Fire Protection Systems Inspection, Testing, M&R TIERED EVALUATION
Solicitation # 36C24822Q0132
248-NETWORK Contract Office 8 (36C248)

POSTED

almost 5 years ago

CLOSED

almost 5 years ago
View Details
NAICS: 811310
Closed
Federal
OPEN, INSPECT AND REPORT FUEL INJECTION NOZZLE
Solicitation # 70Z08022QAG022
Sflc Procurement Branch 1(00080)

POSTED

almost 5 years ago

CLOSED

almost 5 years ago
View Details
NAICS: 811310
Awarded
Federal
HVAC Warranty **Intended to be Sole Sourced**
Solicitation # N0017422R0023
Nswc Indian Head Division

POSTED

almost 5 years ago

CLOSED

almost 5 years ago
View Details
NAICS: 811310
Closed
Federal
Circuit Breaker Repair
Solicitation # M6700122Q1012
Commanding General

POSTED

almost 5 years ago

CLOSED

almost 5 years ago
View Details
NAICS: 811310
Awarded
Federal
Small Equipment Maintenance
Solicitation # SP3300-22-Q-5007
DLA Distribution

POSTED

almost 5 years ago

CLOSED

almost 5 years ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS