Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Power & Data Integration for Furniture

Active

Federal

Response Deadline08/17/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the installation of power and data grommets, underfloor wiring, and electrical connections between distribution panels and walls as part of a modular furniture system integration project. This work requires precise coordination with the existing building electrical infrastructure to ensure seamless functionality, safety compliance, and operational efficiency. The scope emphasizes concealed and organized pathways for power and data distribution tailored to modern workspace furniture configurations, enabling flexible and scalable environments without compromising aesthetics or building systems. Scheduled for performance in Plantation, the contract falls under NAICS code 238210 for electrical contracting and is designated as a subcontract opportunity posted on August 7, 2026, with a firm response deadline of August 17, 2026. The sponsoring agency is the Department of Transportation through its 6973GH Franchise Acquisition Services entity, though no specific set-aside provisions or point of contact details are provided. All work must align with applicable codes and standards for commercial electrical installations, and bidders are expected to demonstrate experience in integrated power/data solutions within built environments.

General Info

Install power and data grommets and underfloor wiring for modular furniture in Plantation by August 17, 2026.

Agency

Department Of Transportation → 6973GH Franchise Acquisition SvcsView Agency

NAICS

238210 - Electrical Contractors and Other Wiring Installation ContractorsView NAICS

Place of Performance

Plantation, FL, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 7

subcontract

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 09:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Transportation → 6973GH Franchise Acquisition Svcs

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Transportation → 6973GH Franchise Acquisition Svcs

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installation of power/data grommets, underfloor wiring, and panel-to-wall electrical connections for modular furniture systems, integrated with building electrical infrastructure.

Similar Contracts

Same NAICS industry code

RFO AWP-0772-00, HNL Fiber Optic Transmission System (FOTS) Design Support and Construction in Honolulu, HI

Solicitation # rfo-awp-0772-00-hnl-fiber-optic-transmission-system-fots-design-support-construction-honolulu-hi-0

The contract involves the installation of a new Fiber Optic Transmission System (FOTS) at Daniel K. Inouye International Airport in Honolulu, Hawaii, in two phases, with work including conduit trenching and boring between three buildings to support the deployment of fiber optic cable. The project is valued between one and five million dollars and is classified under NAICS codes 238210, 237130, and 237990, relating to electrical and telecommunications construction. The solicitation is reserved exclusively for small businesses, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses, ensuring participation by eligible disadvantaged and veteran-owned firms. The solicitation was posted on August 8, 2026, with a response deadline of August 15, 2026, and is managed by PTSI Managed Services, Inc. with Anna Ma serving as the primary point of contact for inquiries and subcontractor coordination.

PTSI Managed Services, Inc.

POSTED

about 8 hours ago

DEADLINE

RFO AWP-0772-00, HNL Fiber Optic Transmission System (FOTS) Design Support and Construction in Honolulu, HI

Solicitation # rfo-awp-0772-00-hnl-fiber-optic-transmission-system-fots-design-support-construction-honolulu-hi

The contract solicits the installation of a new Fiber Optic Transmission System (FOTS) at Daniel K. Inouye International Airport in Honolulu, Hawaii, to be completed in two phases with conduit trenching and boring connecting three buildings. The project falls under NAICS codes 238210, 237130, and 237990 and has a construction magnitude between $1 million and $5 million. The solicitation is restricted to small business entities including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses, as designated by the SBA. The solicitation number is RFO AWP-0772-00-HNL-Fiber-Optic-Transmission-System-FOTS-Design-Support-Construction-Honolulu-HI, posted on August 8, 2026, with a response deadline of August 15, 2026. All inquiries and submissions should be directed to Anna Ma, Subcontract Administrator at Parsons, via email at anna.t-ctr.ma@faa.gov or phone at 360-204-4418.

PTSI Managed Services, Inc.

POSTED

about 8 hours ago

DEADLINE

Replacement Fiber Line

Solicitation # Replacement Fiber Line

The contract pertains to the replacement of existing multimode fiber optic cabling with a new 12-strand single-mode fiber optic cable system connecting Building 2436 to Building 2443 at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The work involves removing retired multimode aerial fiber lines and splice boxes from utility poles and the building’s MDF to IDF infrastructure, and installing the new fiber using center-owned utility poles. All labor, equipment, tools, and materials must be furnished by the contractor, including specific approved components such as Belden FS3L0024NS 12-strand OS2 OSP fiber, Belden ECX-01U 1U rack-mounted enclosures, Belden FFSX12LD 12-port adapter panels, and Belden FTSLC900FS01 LC OS2 connectors, or approved equivalents. SFPs are to be provided by Job Corps. The contract is structured as a fee-for-service agreement with a lump sum bid format, and the award will be based solely on best value as determined by Management & Training Corporation, the operator of the center. The place of performance is clearly defined at the Job Corps Center campus, with title to all work vesting in MTC at the F.O.B. point. The solicitation is set aside for small business categories including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone, Veteran-Owned, and Service-Disabled Veteran-Owned Small Business under NAICS code 238210 with a size standard of $19.0 million. Bidders must self-certify their business status and provide a UEI, tax ID, and DUNS number. Required contractual clauses include Service Contract Labor Standards with Wage Determination WD# 2015-4687 (Rev 31), reporting of executive compensation, small business size representation, and protections when subcontracting. First-tier subcontractors exceeding $30,000 must disclose debarment status. Contractors must comply with the Contract Work Hours and Safety Standards Act, maintain a drug-free workplace, adhere to the Anti-Kickback Act, and report any data breaches to the Department of Labor within one hour. Insurance requirements mandate $1 million per occurrence and $3 million aggregate general liability coverage with MTC named as additional insured, $1 million auto liability, and $500,000 workers’ compensation. In

Earle C. Clements Job Corps Center

POSTED

about 8 hours ago

DEADLINE

AEA-0536, VORTAC (ART) Doppler Conversion, Watertown, NY

Solicitation # aea-0536-vortac-art-doppler-conversion-watertown-ny

The FAA is upgrading its existing VHF Omnidirectional Range facility in Watertown, New York, to a modern Doppler VORTAC system with an offset TACAN, requiring the complete demolition of the current infrastructure. The new installation will feature an on-site 37-foot by 37-foot steel building equipped with a 60-foot diameter counterpoise integrated into the roof, along with full foundations, site preparation, and utility connections. Adjacent to the main structure, a standalone 16-foot by 16-foot by 20-foot steel tower will be constructed to support the offset TACAN component, also including dedicated foundations, site work, and utility services. This project represents a significant modernization of navigational aid capabilities in the region, replacing outdated equipment with a more accurate and reliable Doppler-based system. The solicitation for this project is issued under contract number AEA-0536 and is open exclusively to small business concerns as defined by the Small Business Administration, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone firms, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses. The solicitation was posted on August 8, 2026, with responses due by August 28, 2026, and the North American Industry Classification System code is 238210 for site preparation and infrastructure construction. The contracting activity is managed by PTSI Managed Services, Inc., operating as Parsons, with Angela Stydinger from the FAA serving as the primary point of contact for inquiries. The entire project will be performed at the existing facility location in Watertown, New York.

PTSI Managed Services, Inc (Parsons)

POSTED

about 8 hours ago

DEADLINE

PA System Installation and Integration (Electrical Trade)The contract involves the physical installation and integration of a public address system across multiple school sites within the North East ISD district in Texas, requiring the provision and setup of speakers, amplifiers, control units, and associated cabling. This work must be seamlessly coordinated with existing electrical systems and fire alarm networks to ensure full operational compatibility and compliance with safety standards. The scope is strictly for electrical trade subcontractors, classified under NAICS code 238210, and demands precise on-site execution across a wide geographic footprint of school facilities. The opportunity is open for bids with a response deadline of August 27, 2026, and was posted on August 7, 2026. It is designated as a subcontract and does not specify any set-aside provisions or eligibility restrictions based on business size or category. All work must be performed at the district’s school locations, with no specific city or zip details provided in the posting. Interested parties must engage through the official bidding portal linked in the contract data to access full specifications and submission requirements.

POSTED

about 13 hours ago

DEADLINE

Request for Qualifications for Design Build of District Wide Integrated Public Address/Announcement (PA) Systems in support of the 2025 Bond (A03)

Solicitation # 31-26

North East Independent School District is soliciting qualifications from vendors to design and build a district-wide integrated public address and announcement system in support of its 2025 Bond (A03) initiative through RFQ #31-26. Proposals must demonstrate the bidder’s ability to deliver best value to the district in alignment with the specified requirements, and must be submitted electronically via the Ionwave platform no later than 2:00 p.m. Central Standard Time on Thursday, August 27, 2026. Late, incomplete, or non-electronic submissions will not be accepted, though a single hardcopy sealed envelope containing wet-ink signatures and a USB digital copy may be alternatively delivered to the Procurement office by the deadline. Bidders must register as suppliers to access the portal, and faxed or emailed responses are strictly prohibited. This is not a purchase order but a qualification request, and no guaranteed quantities or dollar values are promised; purchases will occur on an as-needed basis moving forward. The district encourages electronic submission and provides contact support through the procurement office for any assistance with the process.

POSTED

about 13 hours ago

DEADLINE

Minority Business Enterprise (MBE) Participation and SubcontractingThe contract seeks to engage certified Minority Business Enterprises (MBEs) in electrical, civil, or supply roles to fulfill the University System of Georgia Board of Regents' policy on diversity and inclusion while ensuring eligibility for state tax credits under O.C.G.A. §48-7-38. Participation is mandatory for contractors to meet set goals, and MBEs must be properly certified to qualify for inclusion in the project workforce or supply chain. This subcontract opportunity is tied to a specific project under NAICS code 238210, indicating an emphasis on electrical contracting services, though civil and supply roles are also included to broaden MBE involvement. The solicitation is open for responses until September 11, 2026, and is posted under the Georgia state procurement system with an active digital portal for access and submissions. The engagement is not a direct government procurement but rather a subcontracting requirement imposed by the agency, meaning prime contractors must demonstrate how they will integrate certified MBEs into their project execution plan. Failure to meet MBE participation targets may jeopardize tax credit eligibility and could result in contract noncompliance penalties. There is no specified location for performance, but the oversight and compliance responsibilities fall under the Georgia state agency, requiring all participants to align with state regulations and reporting standards. This contract is designed to drive economic equity by channeling project opportunities to historically underrepresented business owners within Georgia’s construction and supply sectors.

Board Of(university System of Georgia) Regents

POSTED

about 14 hours ago

DEADLINE

in about 1 month

Electrical Distribution System InstallationThe contract mandates the installation of a 25kV primary electrical distribution system encompassing pad-mounted transformers, switchgear, grounding infrastructure, and all necessary terminations, strictly in accordance with the referenced electrical drawings labeled E101 through E301. This work is scoped as a subcontract under the broader electrical infrastructure initiative by the Board of Regents of the University System of Georgia, with performance expected to meet all technical specifications and safety standards implied by the drawings and industry practices for high-voltage distribution systems. The solicitation was posted on August 7, 2026, with a firm deadline for responses set for September 11, 2026, at 7:00 PM. The North American Industry Classification System code 238210 indicates this is for electrical contracting services, aligning with specialized power system installation activities. Although specific location details for performance or contact points are not provided, the contracting entity is clearly the Georgia agency under the University System of Georgia, and the work is likely situated at one or more of its campuses or facilities governed by the Board of Regents. All bids must fully comply with the technical requirements and timeline, with no set-aside provisions indicated for small or disadvantaged businesses.

Board Of(university System of Georgia) Regents

POSTED

about 14 hours ago

DEADLINE

in about 1 month

GSOU_J-428-BID, Primary Electrical Distribution (Swainsboro)

Solicitation # PE-47200-RFQ-2027-000000149

Sealed bids are required for PROJECT NO. J-428, Primary Electrical Distribution, at East Georgia State College in Swainsboro, Georgia, with submissions due by 2:00 PM EST on September 11, 2026, at the Georgia Southern University Facilities Administration Building located at 3769 Old Register Road in Statesboro. Bids must be physically delivered and placed on the table in the Bid Room by the deadline, and all submissions will be publicly opened and announced at that same time and location. The solicitation number is PE-47200-RFQ-2027-000000149, posted on August 7, 2026, under the oversight of the Board of Regents of the University System of Georgia. The primary point of contact for questions and inquiries is Abel Belayneh, reachable at 202-539-6136 or abel.belayneh@introba.com. The project falls under a state-level procurement process and is designated for performance in Swainsboro, Georgia.

Board Of(university System of Georgia) Regents

POSTED

about 14 hours ago

DEADLINE

in about 1 month

Electrical Installation and Wiring ServicesThe contract titled Electrical Installation and Wiring Services is a subcontract for the installation of electrical systems including wiring, lighting, and power distribution as part of a construction project under the jurisdiction of the Columbus Consolidated Government in Georgia. The work is classified under NAICS code 238210, indicating it pertains to electrical contracting services. The solicitation was posted on August 7, 2026, with a response deadline set for September 9, 2026, at 10:00 PM Eastern Time. The place of performance and specific project location are not detailed in the provided data, nor are there any set-aside provisions or agency-specific organizational details listed. Interested parties must submit responses through the official Georgia procurement portal linked in the document.

Columbus Consolidated Government

POSTED

about 14 hours ago

DEADLINE

in about 1 month

Electrical Support for Mechanical SystemsThe contract titled Electrical Support for Mechanical Systems pertains to the electrical rough-in, connections, and power distribution required for new HVAC equipment including air handling units, terminal units, and control panels. This work is classified as a subcontract under NAICS code 238210 and is being procured by the Georgia Institute of Technology through its Georgia agency division. The solicitation was posted on August 7, 2026, with a response deadline of August 28, 2026, at 7:00 PM. The place of performance and specific location details are not provided, and no set-aside type or organization type is indicated. Interested parties must submit proposals by the deadline through the provided online portal linked to the Georgia Department of Administrative Services.

Georgia Institute of Technology

POSTED

about 16 hours ago

DEADLINE

Cabling Service and Related Products

Solicitation # COOP2026SOL-00008

The Department of Information Resources in Texas is soliciting offers for Cabling Services and Related Products under solicitation number COOP2026SOL-00008, with the goal of establishing a cooperative contract to support state and local government entities. The solicitation, posted on August 7, 2026, requires responses to be submitted by September 24, 2026, and is open to qualified vendors capable of delivering comprehensive cabling solutions including installation, maintenance, and related products across Texas. The contract will serve SLED agencies, enabling them to procure these services efficiently through a pre-vetted vendor pool managed by the state. Tony Tolbert of the Department of Information Resources is the designated point of contact for all inquiries, reachable via email or phone, and offers are to be submitted through the Texas SmartBuy portal. Performance of services is expected to occur throughout the state of Texas with no specific city restrictions, ensuring broad geographic accessibility for state and local customers. The solicitation does not specify a set-aside type or NAICS code, indicating an open competition for eligible vendors. Successful responders will enter into a cooperative agreement allowing multiple state and local agencies to leverage the awarded contract terms for timely and cost-effective cabling infrastructure needs.

Department of Information Resources

POSTED

about 16 hours ago

DEADLINE

in about 2 months

More opportunities from Department Of Transportation → 6973GH Franchise Acquisition Svcs

Same awarding agency

Design & Layout ServicesThe contract titled Design & Layout Services under NAICS code 541410 is a subcontract focused on the development and refinement of Design Intent Drawings for furniture layout within a facility in Plantation. The work requires strict adherence to ADA compliance standards, optimal use of available space, and seamless integration with existing building infrastructure including demountable walls and other system components. The deliverables must ensure functional and accessible environments while aligning with architectural and operational constraints of the existing structure. The solicitation was posted on August 7, 2026, with a response deadline of August 17, 2026, and is managed by the Department of Transportation through its Franchise Acquisition Services division. No set-aside type is specified, and the place of performance is confirmed as Plantation with no additional address details provided.

Interior Design Services

POSTED

DEADLINE

Project Management ServicesThe contract titled Project Management Services entails comprehensive end-to-end oversight of a project under the Department of Transportation, specifically managed by 6973GH Franchise Acquisition Svcs. The scope includes full scheduling, coordination with subcontractors, and sustained communication with FAA stakeholders to ensure seamless project progression. The contractor is responsible for maintaining strict compliance through detailed reporting and delivering final documentation such as installation photographs and finalized as-built records, ensuring transparency and regulatory alignment. The project is slated for performance in Plantation with a response deadline of August 17, 2026, and falls under the NAICS code 541611 for management consulting services, classified as a subcontract opportunity with no specified set-aside type.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Furniture & Signage Procurement (Supply)The contract requires the supply of all Haworth-branded furniture and signage products including systems furniture, seating, conference tables, and collaboration units, as specified in the approved design drawings, with full coordination of logistics and delivery to the site in Plantation, Florida. All items must be provided in strict alignment with the project specifications, ensuring compatibility, quality, and timely installation readiness. The procurement includes end-to-end handling of transportation, unloading, and delivery scheduling to meet the project’s operational timeline. This is a subcontract under the NAICS code 423220, issued by the Department of Transportation under the agency name 6973GH Franchise Acquisition Svcs, with a response deadline of August 17, 2026. The opportunity was posted on August 7, 2026, and no set-aside designation or organizational type restrictions are specified. The place of performance is exclusively the Plantation, Florida location, and all deliverables must be fulfilled to this single site without deviation. The contract does not include additional services beyond supply and logistics coordination as defined by the design documentation provided.

Home Furnishing Merchant Wholesalers

POSTED

DEADLINE

Full Furniture Installation & Site IntegrationThe contract entails the full installation of Haworth modular workstations, seating, conference furniture, and signage across three floors of a facility located in Plantation, with seamless integration into existing demountable walls and integrated power and data systems. The scope requires precise coordination to ensure all new furniture elements function effectively within the current infrastructure, maintaining operational continuity during installation. All materials must be properly configured and securely installed to meet ergonomic, aesthetic, and technical specifications. Final deliverables include completing a comprehensive punch-list to address any deficiencies, ensuring all items meet contractual standards, and thorough debris removal to restore the site to a clean, usable condition. The work is classified under NAICS code 238990, indicating it is a subcontract for other heavy and civil engineering construction activities, with a response deadline of August 17, 2026. The contracting entity is the Department of Transportation through its Franchise Acquisition Services division, and performance is limited to the designated location in Plantation.

All Other Specialty Trade Contractors

POSTED

DEADLINE

South Florida Flight Standards District Office (FSDO) Relocation Project

Solicitation # 2026FSDO

The South Florida Flight Standards District Office (FSDO) Relocation Project involves the procurement, delivery, and installation of new furniture, signage, and equipment for a newly established office at 1600 Southwest 80th Terrace in Plantation, Florida. The project, valued at 53,174 USF, is designed to accommodate 318 personnel and includes a fully integrated Haworth furniture solution that aligns with the building’s architectural design and existing technology infrastructure. The scope specifically covers Floors 2, 3, and 4 and integrates with the lessor-installed Haworth Enclose demountable wall systems, ensuring a cohesive and functional workspace environment. All phases of the project—from design through installation—are included in the requirement. The solicitation, issued under number 2026FSDO and posted on August 7, 2026, has a response deadline of August 17, 2026. The North American Industry Classification System code is 337214, indicating a focus on office furniture manufacturing. The contracting office is the Department of Transportation’s Franchise Acquisition Services unit based in Oklahoma City, though the work will be performed exclusively in Plantation, Florida. Primary point of contact for inquiries is Shomari Wilson, reachable via email or phone, with additional details available through the provided SAM.gov link. There is no set-aside designation specified for this solicitation.

Office Furniture (except Wood) Manufacturing

POSTED

DEADLINE

Upgrade of four (4) SR Hawk Receiver/Transmitter Units

Solicitation # 6973GH-26-R-00227

The Federal Aviation Administration is proceeding with a single-source contract negotiation with SRCTec LLC of North Syracuse, New York, to upgrade four SR Hawk Receiver/Transmitter Units from Spiral 6 to Spiral 7 for use as spare components in CBP’s MVSS-R systems. This procurement is justified on the basis of SRCTec’s exclusive proprietary knowledge of the system’s architecture, firmware, diagnostic tools, calibration procedures, and hardware integration, none of which are accessible to other vendors. The upgrade requires specialized equipment and configuration management processes that are controlled solely by the manufacturer, eliminating the possibility of competitive bidding. The action aligns with FAA Acquisition Management System guidelines permitting sole-source procurement when unique technical expertise is essential and unavailable elsewhere. The North American Industry Classification System code for this effort is 334511, covering the manufacturing of aeronautical navigation systems, with a small business size standard of 1,350 employees. The procurement is not a solicitation or request for proposal, and no competition is being solicited. The presolicitation notice was posted on August 6, 2026, with responses due by August 20, 2026, and all inquiries must be submitted in writing to Contracting Officer Connie Houpt at connie.m.houpt@faa.gov. The contract will be managed by the Department of Transportation’s 6973GH Franchise Acquisition Services out of Oklahoma City, with performance occurring at SRCTec’s facility in North Syracuse, New York.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Market Survey Sources Sought Phoenix Connect Surge Protection Device

Solicitation # 2604024

The Federal Aviation Administration is seeking market information for the procurement of 4,020 Phoenix Contact Surge Protection Devices, manufacturer part number 2800982, to ensure the ongoing reliability and operational integrity of mission-critical air traffic control systems. Due to the necessity of precise form, fit, and function compatibility, only the specified Phoenix Contact product is acceptable, and proprietary rights for this component are exclusively held by the manufacturer. This is not a request for proposals or quotations; the FAA is conducting a market survey solely to gather vendor capabilities and assess competition levels for future procurement planning. Responses will inform the selection of the appropriate acquisition method and help determine if the contract can be set aside for small businesses, service-disabled veteran-owned small businesses, or 8(a)-certified firms under NAICS code 335999 with a size standard of 600 employees. Vendors interested in being considered for future procurement opportunities must submit a capability statement detailing past performance on similar government contracts and, if applicable, a copy of their SBA 8(a) certification. All submissions must be emailed to nina.j.musser@faa.gov by 4:00 p.m. CST on August 18, 2026, with the subject line clearly stating “Phoenix Contact Surge Protection Devices. (Manufacturer P/N: 2800982)”. The FAA will not compensate vendors for costs incurred in preparing responses, and all submitted materials are considered proprietary and will remain confidential. The procurement will be managed through the Department of Transportation’s Franchise Acquisition Services office based in Oklahoma City, with no pre-defined set-aside status established at this stage.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

Notice of Intent to Single Source: ARCHIBUS SOLUTION CENTERS-RESEARCH TRIANGLE, LTD

Solicitation # 08042026ARC

The Federal Aviation Administration intends to award a single-source contract to ARCHIBUS SOLUTION CENTERS-RESEARCH TRIANGLE, LTD, a certified small business, to continue providing software licensing and advanced technical support for the ARCHIBUS Integrated Workplace Management System, which is currently used by the FAA for facility management. This procurement is essential to maintain, support, and further develop the existing on-premise ARCHIBUS application across both test and production environments, with the requirement for an authorized ARCHIBUS Solution Center Business Partner to deliver the necessary high-level technical support. The contract will include annual term licensing and ongoing support services critical to the system’s functionality and operational continuity. This action follows FAA Acquisition Management System Policy 3.2.2.4, which permits sole-source contracting when only one vendor can meet the agency’s technical and support requirements. The solicitation number is 08042026ARC, posted on August 4, 2026, with responses due by August 13, 2026. The NAICS code for this procurement is 541990, and the contracting office is under the Department of Transportation, specifically the Franchise Acquisition Services located in Oklahoma City, Oklahoma. Performance will occur in Oklahoma City, and primary point of contact is Lisa Sedlacek-Ewers, with secondary contact Andre Casiano, both reachable via FAA email addresses. The contract action is documented via the SAM.gov portal with the specified UI link for official record.

All Other Professional, Scientific, and Technical Services

POSTED

DEADLINE

ASR-8 and ASR-9 Encoders

Solicitation # 6973GH-26-MS-00006

The FAA is seeking information from potential vendors capable of supplying ASR-8 and ASR-9 encoders, critical components used in radar antenna systems for azimuth position tracking within the National Airspace System. These encoders, identified by specific part numbers and NSNs, are currently manufactured exclusively by Sensor Systems LLC and are formally approved under FAA configuration management control. Due to the lack of alternative suppliers, qualifying a new source would involve extensive engineering, testing, and production delays that risk prolonged outages at multiple FAA facilities. This market survey is not a request for proposals but rather a tool to assess the availability of qualified competitors and determine if set-asides for small businesses, service-disabled veteran-owned small businesses, or 8(a) certified firms are feasible. The NAICS code is 334511 with a small business size standard of 1,350 employees. Interested vendors must submit a detailed capability statement including proof of rights to use OEM data, evidence of qualification and manufacturing capability, past performance details, and a copy of ISO 9001:2015 certification. Proof of active registration in SAM.gov is mandatory, and vendors claiming 8(a) or SDVOSB status must provide applicable certification letters. Responses must be emailed to the designated point of contact by August 14, 2026, at 2:00 pm CT and must be clearly marked with the solicitation number 6973GH-26-MS-00006. The FAA will not compensate vendors for costs incurred in preparing submissions. This initiative supports the FAA’s acquisition planning process and aims to identify viable sources to ensure continuity of critical radar system components. Additional support through the DOT Short Term Lending Program is available for eligible small and disadvantaged businesses seeking working capital for transportation-related contracts.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

MARKET SURVEY FOR ACQUISITION OF 4 EA SYSTEL MANUFACTURED MISSION PROCESSORS, PART NUMBER RC4600D-JHU-01, AND 1 EA SYSTEL MANUFACTURED MISSION WORKSTATION, PART NUMBER RC2200DH-JHU-01. RESPONSES TO THIS MARKET SURVEY WILL BE USED FOR INFORMATIONAL PURPOSE

Solicitation # Market_Survey_FAA-AMO-MSIL-Equipment

The Federal Aviation Administration is conducting a market survey to assess industry capability and interest in supplying four Systel-manufactured Mission Processors, part number RC4600D-JHU-01, and one Systel-manufactured Mission Workstation, part number RC2200DH-JHU-01. These hardware units are specified with particular configurations including dual Xeon 6736P processors, 4500 Blackwell network interface cards, NVMe and SATA storage carriers, and specific form factors and mounting requirements. The survey is strictly for informational purposes and does not constitute a solicitation, request for proposal, or any binding procurement action. The FAA is evaluating whether sufficient competition exists to support a potential set-aside for small businesses, service-disabled veteran-owned small businesses, or SBA 8(a)-certified firms, with any future contract expected to be a fixed-price arrangement. Interested vendors must submit a capability statement detailing prior experience with similar government contracts and, if applicable, a copy of their SBA 8(a) certification. All responses must be sent via email to edward.b.wright@faa.gov by 5:00 p.m. CST on August 14, 2026, with the subject line “Market Survey Response: FAA AMO MSIL Equipment.” The FAA will treat all submissions as confidential and encourages vendors to label proprietary information appropriately. No phone inquiries will be accepted; all communication must be in writing. This survey aims to gather essential data to inform the FAA’s procurement strategy and ensure competitive, efficient acquisition of the required hardware, with performance expected to occur in Oklahoma City, Oklahoma.

Electronic Computer Manufacturing

POSTED

DEADLINE

Temporary Equipment & Supplies

Other Professional Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

Program Management & Quality Control

Administrative Management and General Management Consulting Services

POSTED

DEADLINE