Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Prohibited Telecommunications Equipment Compliance

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract requires strict compliance with regulations prohibiting the use of covered telecommunications equipment, including devices and systems sourced from Huawei, ZTE, and other specified entities, across all information technology infrastructure. The subcontractor must ensure that no such equipment is deployed, integrated, or used in any capacity within the systems supporting the Nuclear Reactor Program’s operations, with particular emphasis on the place of performance located in Tracy, California, with zip code 95304-5000. Continuous adherence to this requirement is mandatory throughout the term of the agreement. Annual representations must be submitted through the System for Award Management to certify ongoing compliance with these restrictions. Failure to provide timely and accurate representations may result in breach of contract and potential penalties. The solicitation, issued under NAICS code 541519, is a subcontract with a response deadline of August 14, 2026, and was posted on August 3, 2026. All parties must maintain rigorous recordkeeping and internal controls to demonstrate compliance with federal prohibitions on covered telecommunications equipment.

General Info

Prohibit covered telecom equipment from Huawei, ZTE in nuclear reactor systems at Tracy, CA; annual compliance certification required.

Agency

Department Of Defense → NUCLEAR REACTOR PROGRAMView Agency

NAICS

541519 - Other Computer Related ServicesView NAICS

Place of Performance

TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → NUCLEAR REACTOR PROGRAM
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → NUCLEAR REACTOR PROGRAM
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Ensure no use of covered telecommunications equipment (e.g., Huawei, ZTE) in IT systems and submit annual representations via SAM.

Similar Contracts

Same NAICS industry code

NAICS: 541519
New
Federal
7A21--PACT Act - Open Text Micro Focus LoadRunner Maintenance (VA-27-00003087)
Solicitation # 36C10B26Q0723
The contract solicitation seeks information regarding maintenance and support services for OpenText LoadRunner software licenses under TAC Number VA-27-00003087, with the official title 7A21--PACT Act - Open Text Micro Focus LoadRunner Maintenance. Issued by the Department of Veterans Affairs through the Technology Acquisition Center in Eatontown, New Jersey, the solicitation is classified as a sources-sought notice under NAICS code 541519, indicating it targets other professional, scientific, and technical services. The request aims to gather market intelligence to determine vendor availability and capability to provide ongoing maintenance support for LoadRunner, a performance testing tool used for application performance evaluation and optimization. The solicitation was posted on August 4, 2026, with a response deadline of August 12, 2026, at 5:00 PM Eastern Time. Interested parties must submit responses through the SAM.gov portal, and all inquiries should be directed to Anthony Pavese, Contract Specialist, at anthony.pavese@va.gov. There is no set-aside designation specified, meaning the opportunity is open to all eligible contractors regardless of size or status. The place of performance is not defined in the details, suggesting services may be delivered remotely or at the agency’s discretion. This action is part of the VA’s effort to establish or renew support mechanisms for critical software systems used in its IT infrastructure.
Technology Acquisition Center Nj (36C10B)

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541519
New
Federal
J063--CCTV SERVICE & MAINTENANCE
Solicitation # 36C26226Q1049
The Department of Veterans Affairs, through the Network Contract Office 22 in Mesa, Arizona, is conducting a sources sought announcement for comprehensive CCTV service and maintenance under solicitation number 36C26226Q1049, designated as a Service-Disabled Veteran-Owned Small Business (SDVOSB) set aside with NAICS code 541519. This is a presolicitation market research action intended to identify qualified vendors capable of providing maintenance, repair, technical support, upgrades, and system management for CCTV systems across the VA San Diego Healthcare System, including the La Jolla Hospital main campus and seven Community-Based Outpatient Clinics. The requirement encompasses support for Avigilon, Bosch, Pelco, and all legacy or compatible security systems, with the proposed contract structured as a one-year base period and four optional additional years. Vendors must demonstrate technical expertise and capability through a detailed capability statement and documentation proving experience with multi-site, multi-server surveillance systems and the ability to deliver both on-site and remote support, including software and firmware updates, Avigilon licensing, and on-demand work order responses for physical security components. Vendors interested in responding must be registered in the System for Award Management (SAM), complete the Online Representations and Certifications Application (ORCA), and, if applicable, be registered in the SBA-Dynamic Small Business Search (DSBS) Registry. Responses must be submitted via email to Felicia Simpson, Contracting Officer, no later than 1:00 PM Mountain Time on July 6, 2026, and must include company name, address, point of contact, phone, fax, email, DUNS number, CAGE code, tax ID number, and clear identification of small business status. While no pricing or contract value is disclosed due to the presolicitation nature of this announcement, vendors must detail their ability to meet strict performance requirements including submission of electronic Field Service Reports (FSR) within 48 hours after every preventative maintenance visit or on-site service call. Each FSR must contain a detailed description of services performed, replacement parts used, total service hours, safety checks, performance data, date of service, and vendor recommendations for maintaining optimal equipment operation. Additionally, technicians are required to report any unsafe conditions or signs of equipment misuse directly to the Contracting Officer’s Representative. This action does not constitute a solicitation or obligation to award a contract and is solely for market research purposes to inform future procurement activities.
262-NETWORK Contract Office 22 (36C262)

POSTED

about 18 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541519
New
Federal
Fluke Met/Team and Met/Cal Network Upgrade
Solicitation # 280148
The Air Force Metrology Calibration Program is conducting market research to identify potential vendors capable of upgrading the existing Fluke Met/Team and Met/Cal calibration management system used by the Royal Saudi Air Force Calibration Network. This effort aims to expand the software and associated hardware—including servers, laptops, and software licenses—to all Precision Measurement Equipment Laboratory locations in Saudi Arabia. The upgrade requires new, non-reconditioned equipment with specific quantities: one server, eighty laptops, ninety-nine software licenses, fifteen calibration toolkits, and three support units. Vendors must provide detailed capability statements including company information such as DUNS and CAGE codes, business size classification, socioeconomic status, sales history, technical specifications, warranty details, and rough order of magnitude pricing for individual and total quantities. Responses must indicate whether the product is a commercial item, if it is available on a GSA schedule, whether the vendor accepts the government purchase card, and the estimated delivery timeline. All submissions must confirm SAM registration status, domestic or foreign ownership, and include a point of contact with phone and email. Proprietary information must be clearly marked and will be protected under applicable regulations. This is strictly a market research notice; no binding contract will result from responses, and no funding is currently available. All costs related to responding are borne by the respondent. Both large and small businesses, including small disadvantaged, woman-owned, veteran-owned, 8(a), HUBZone, and HBCU/MI entities, are encouraged to participate, and joint ventures or teaming arrangements are welcome. Vendors lacking direct experience in a specific area must explain how they plan to meet the requirement through subcontracting or partnerships. Responses must be submitted in .pdf, .doc, or .xls format by August 19, 2026, at 2:00 PM ET via email to the designated point of contact, fax, or mail, with early submissions strongly encouraged. The NAICS code for this effort is 541519, with a size standard of $34 million. The Government will not pay for responses nor commit to future solicitation, and no security clearance or foreign participation levels have been established. All information provided will be used solely for market research purposes to inform potential future acquisition planning.
FA2263 Aflcmc Romk Afmetcal

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541519
New
Federal
Broadcom Solicitation
Solicitation # 28321326Q00000227
The solicitation for the Broadcom Mainframe Software and Portfolio License Agreement targets the acquisition of licensed software, consulting services, and related support under a firm-fixed-price structure, with a base year beginning September 30, 2026, and six one-year option periods extending through September 29, 2033. The contract includes quantified line items for mainframe software based on MSU consumption, distributed software under a portfolio license agreement, named user licenses, and up to 60 days of consulting services annually, each with option provisions allowing for increases of up to 20 additional units or days per option year. Price proposals must be submitted in Volume II, limited to ten pages, and evaluated under a Lowest Price Technically Acceptable approach, where technical acceptability determines eligibility before price becomes the deciding factor. The Government will assess compliance with technical requirements, including full adherence to Section 508 accessibility standards, WCAG 2.0 Level A/AA, VPAT 2.1 reporting, and ANDI tool validation, alongside cybersecurity obligations under FISMA, NIST SP 800-53 and 800-171, and the Cybersecurity Supply Chain Risk Assessment questionnaire, which may disqualify submissions deemed to present an unacceptable level of risk. All offerors must provide a Unique Entity Identifier, certify their small business or socioeconomic status, and submit administrative and price volumes separately via email to designated SSA contacts, with submissions restricted to Word, Excel, or PDF formats. Contractors must comply with stringent security and suitability requirements, including HSPD-12 background checks, mandatory annual training on information security and records management, and prohibitions against storing or processing SSA data on non-agency systems or personally owned devices. Data must be retained for e-discovery and returned or destroyed within 20 days of contract closure. Invoicing must be conducted electronically via .pdf attachment to the designated SSA payment portal, with payments tracked through the Invoice Processing Platform, and no use of WAWF is permitted. The contracting officer’s representative and alternate will be designated upon award, and all subcontractors are bound by the same security, privacy, and compliance obligations as the prime contractor. The response deadline has been extended to August 11, 2026, at 3:00 p.m. EDT, and no contract value can be estimated due to the absence of unit pricing from offerors.
Office of Acquisition and Grants

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 541519
New
DIBBS
Controlled Unclassified Information (CUI) SafeguardingThe contract requires implementation of NIST SP 800-171 security controls to protect Controlled Unclassified Information (CUI) within non-federal information systems, in full compliance with DFARS clauses. This subcontract is part of a broader Department of Defense initiative to ensure stringent cybersecurity measures are applied to sensitive data handled by contractors, particularly within the Medical Supply Chain infrastructure. All systems supporting CUI must be configured and maintained to meet the 110 security controls outlined in NIST SP 800-171, covering access control, audit, configuration management, identification and authentication, incident response, and system and communications protection. Performance is targeted at Beale AFB, California, with a firm deadline for response on August 10, 2026, and the solicitation was posted on August 3, 2026. The NAICS code 541519 identifies the contract under Other Computer Related Services, indicating the work involves technical cybersecurity implementation and support rather than hardware procurement or general IT services. Subcontractors must be prepared to demonstrate full compliance with federal cybersecurity standards, maintain documented policies and procedures, and be capable of sustaining controls through continuous monitoring and reporting. Failure to adhere to these requirements may result in contract termination or loss of eligibility for future DoD work.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 541519
New
Federal
Prohibited Vendor Compliance MonitoringThis contract requires strict adherence to federal regulations prohibiting the use of hardware, software, or services from designated restricted vendors including Huawei, Kaspersky, and Bytedance, in alignment with FAR clauses 52.204-23, -25, and -27, as well as Section 889 of the National Defense Authorization Act. The subcontractor must implement and maintain robust compliance measures to ensure no prohibited items are integrated into systems, networks, or operations, with ongoing monitoring to detect and eliminate any unauthorized use. All deliverables and services must be verified as free from ties to these banned entities, and documentation must support continuous compliance throughout the contract period. The contract is issued by the US Army Engineer District Walla Walla under the Department of Defense, with a place of performance in Coeur d Alene, and is classified under NAICS code 541519 for computer systems design services. The solicitation was posted on August 3, 2026, with responses due by August 19, 2026. As a subcontract, it is subject to the prime contractor’s compliance obligations, and failure to meet vendor restriction requirements may result in termination, penalties, or debarment. All parties must have internal controls and audit trails to demonstrate adherence, and any discovery of noncompliance must be immediately reported and remediated.
US Army Engineer District Walla Wal

POSTED

2 days ago

DEADLINE

in 14 days
View Details
NAICS: 541519
New
Federal
Vortex Teardown, Test and Evaluation
Solicitation # N6523-26-SIMACQ-LSUBP0016-0228
The U.S. Navy’s Naval Information Warfare Center Atlantic intends to award a noncompetitive, firm-fixed-price purchase order to L3 Technologies Inc for part number 60065293 001, which involves Vortex Teardown, Test and Evaluation with an option for repair. The government has determined that L3 Technologies Inc is the original manufacturer of the component and the sole source capable of performing the required technical work, justifying the use of FAR 13.106-1b for noncompetitive negotiation. The action is classified under NAICS Code 541519 with a small business size standard of $34 million, and the procurement is designated as a total small business set aside. Although the government plans to proceed without competition, responsible sources who believe they can meet the requirement may submit capability statements or quotations by 18 August 2026 to inform the government’s decision on whether to open the requirement to competition. Any determination to proceed noncompetitively remains at the government’s sole discretion. All responses must be submitted through the PIEE Solicitation Module, and inquiries should be directed to Catherine Denaux at catherine.g.denaux.civ@us.navy.mil, with Michelle Pierce available as a secondary point of contact. The solicitation was posted on 3 August 2026 and the response deadline is 18 August 2026. The place of performance and specific technical details are not fully defined in the notice, but the work is to be executed under the authority of NIWC Atlantic located in North Charleston, South Carolina. Participation by small businesses is encouraged, and the government will evaluate all timely submissions before making a final decision on procurement strategy.
Niwc Atlantic

POSTED

2 days ago

DEADLINE

in 14 days
View Details

More opportunities from Department Of Defense → NUCLEAR REACTOR PROGRAM

Same awarding agency

NAICS: 332919
New
DIBBS
TEE, PIPE
Solicitation # SPE7M2-26-Q-0717
This contract specifies the procurement of a copper alloy socket type tee fitting with a nominal pipe size of 1 inch, manufactured via a metal casting process requiring specialized tooling. The item is identified by NSN 4730-00-542-5250 with a quantity of 385 units, and delivery is required within 100 days of award. All technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The contract mandates strict adherence to DLA packaging standards, configuration change management through engineering change proposals, and the removal of government identification from non-accepted supplies. Mercury or mercury-containing compounds are prohibited from intentional addition or direct contact with the product except for specific functional uses such as batteries, fluorescent lights, sensors, controls, weapon systems, or NAVSEA-specified reagents; portable mercury-containing devices must be shock-proof with a secondary containment barrier per NAVSEA 5100-003D. The supplier is required to furnish one Certificate of Quality Compliance (COQC) for each manufacturing lot, prepared in accordance with the Supplemental Quality Assurance Provision, and make it available for Government review at the point of inspection if applicable. An electronic copy of each COQC must be uploaded as an attachment to the Receiving Report in the iRAPT system for Government records. The COQC documentation is considered part of the item’s price, and compliance is mandatory for acceptance. The solicitation is a total small business set-aside under FAR 19.5 with a response deadline of August 11, 2026, and the point of contact for inquiries is Alla Yakover. The place of performance is New Cumberland, PA, and the contracting activity falls under the Department of Defense’s Nuclear Reactor Program.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332722
New
DIBBS
NUT, SLEEVE
Solicitation # SPE7M2-26-Q-0714
The contract pertains to the procurement of 167 fixed bushings, identified as nuts and sleeves, with the NSN 5310-00-916-7522, designed for use in military applications under the Nuclear Reactor Program of the Department of Defense. The component features a #6 .138 inch - 32 UNC-2B threaded nut size and is constructed from aluminum alloy 2024 with an overall cadmium surface treatment, except for the internal locking insert which is made of polytetrafluoroethylene, providing a self-locking mechanism to prevent loosening under vibration. The item is classified as a commercial item and must comply with the current revision of the applicable part standard, whether military or consensus non-government standard, with previous revisions still acceptable for hardware manufactured before the solicitation date. All units must bear identification markings consistent with MIL-STD-130N and adhere to the DLA Master List of Technical and Quality Requirements referenced in the procurement documents, including quality conformance inspection and removal of government identification from non-accepted supplies. The solicitation, under number SPE7M2-26-Q-0714, is a total small business set-aside with a response deadline of August 11, 2026, and a 100-day delivery window after award. Mercury and mercury-containing compounds are strictly prohibited from direct contact with the hardware, except in limited, approved cases such as functional batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or specified chemical reagents by NAVSEA, with portable devices containing mercury requiring shockproof construction and a secondary containment layer as per NAVSEA 5100-003D. Packaging must meet DLA requirements and all supplies are subject to federal procurement rules for military hardware. The point of contact for the procurement is Alla Yakover, and performance is required at Hill AFB, Utah, with all submissions governed by the DLA’s eProcurement system and procurement guidelines.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 335999
New
DIBBS
CONTACT, ELECTRICAL
Solicitation # SPE7M2-26-Q-0718
This contract pertains to the supply of electrical contacts designated by NSN 5999-01-082-0297, with a quantity of 7,597 units to be delivered under a firm fixed price arrangement with zero variance allowed in quantity. Delivery is required within 250 days after the award date, with inspection and acceptance occurring at the destination. The item is classified as a commercial item and is listed on a qualified products list, requiring strict adherence to the SAE AS39029E standard, including the mandatory marking of both the current and most recently superseded part numbers on each unit pack. The product is designated a critical application item with technical documentation aligned to TDP Rev B Gen 3 and must comply with MIL-STD-2073-1E packaging standards, including specific preservation methods, packaging materials, and unit container configurations. Marking must follow MIL-STD-129 with no special marking required. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for specified functional uses like batteries, fluorescent lamps, sensors, and naval system components, which must meet additional containment and shockproofing requirements per NAVSEA 5100-003D. All packaging, labeling, and shipping of hazardous materials must comply with IP025 requirements. The contract references the DLA Master List of Technical and Quality Requirements for incorporated technical and quality mandates, with revisions controlled by the solicitation issue date. Deliveries are to be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLAD Proc Note C19 and C20. The contract was issued under solicitation SPE7M2-26-Q-0718 with a proposal deadline of August 11, 2026, and the requirement is funded for a material need date of July 17, 2027.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332722
New
DIBBS
WASHER, LOCK
Solicitation # SPE7M2-26-T-5985
This contract specifies the procurement of lock washers identified by NSN 5310-01-339-6531 under solicitation SPE7M2-26-T-5985, requiring full and open competition with no deviations or waivers permitted unless formally approved. The item must comply with technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, and must adhere to NASM35338 Revision 5 and ASME B18.21.1 Revision 9 specifications. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware except in explicitly allowed applications such as batteries, fluorescent lamps, instruments, sensors, weapon systems, and chemical reagents approved by NAVSEA; portable fluorescent lamps and instruments containing mercury must include shock-proof construction and a secondary containment boundary as per NAVSEA 5100-003D. The product is designated as a critical application item requiring strict configuration control and engineering change proposal procedures. The contract includes two delivery lines for a total quantity of 128 hardware units, with each line specifying a quantity of 11 and 117 units respectively, to be delivered in HD (hand) units under FOB origin terms, with zero tolerance for variance in quantity. Delivery must occur within 105 days from contract award, with inspection and acceptance occurring at the destination. Packaging must conform to MIL-STD-2073-1E and ASTM D3951 standards with preservation method code 10, and marking must follow MIL-STD-129 with no special marking required. Palletization must comply with DLA packaging requirements. Shipments are directed to two DLA distribution depots: Hill AFB, Utah, and Robins AFB, Georgia, with defined freight and parcel post addresses provided. The need ship dates are December 1, 2026 and December 26, 2027, while the original required delivery date is March 27, 2027. The contract is managed by the Department of Defense’s Nuclear Reactor Program, with primary points of contact listed for inquiries. All items must satisfy the DoD-authorized unit of issue and related ANSI X12 standards as referenced by DLA.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, ELECTR
Solicitation # SPE7M2-26-T-5987
This contract specifies the procurement of a fixed electrolytic capacitor with NSN 5910013072343 and part number M39003/01-7300, governed by MIL-PRF-39003/1L and MIL-PRF-39003P Supp 1, with compliance required to the current revision of the DLA Master List of Technical and Quality Requirements referenced by R-numbers. The item is classified as a commercial item and is subject to strict Qualified Products List (QPL) requirements, meaning the manufacturer must be QPL-approved at the time of award. Mercury and mercury-containing compounds are strictly prohibited in the product unless exempted for specific functional uses such as batteries or sensors, and portable devices containing mercury must meet shock-proof and secondary containment standards per NAVSEA 5100-003D. Use of Class I ozone-depleting substances is prohibited in all manufacturing and processing steps unless explicitly approved in writing by the contracting officer, with exceptions for commercial items and numbered parts only. The item must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, including specific lead finish labeling per IPC/JEDEC J-STD-609 on each unit package. Sampling follows MIL-STD-1916 or ASQ H1331 with zero nonconformances required unless otherwise stipulated, and critical attributes are verified at the highest levels. The product must be delivered FOB origin within 161 days, with no quantity variance allowed, inspected and accepted at destination, and shipped to the specified DLA Distribution Warner Robins address. The contract was solicited under SPE7M2-26-T-5987 with a response deadline in August 2026, and delivery is required by May 9, 2027.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECTRI
Solicitation # SPE7M2-26-T-5986
This contract specifications pertain to a electrical plug connector designated by NSN 5935-01-260-5258 and part number D38999/26WD35PB, required in a quantity of 2,600 units to be delivered FOB origin within 161 days. The item must conform to MIL-DTL-38999N and MIL-DTL-38999/26G standards and is classified as a qualified product under the DLA Qualified Products List for connector assemblies and electrical contacts. Manufacturing sources are restricted: materials produced by Amphenol, Matrix, or Pyle National between July 2006 and June 2016 are prohibited, as are items from Bendix Corporation manufactured between January 1977 and February 1984. Traceability documentation may be requested to verify manufacturing dates and origins. The product is designated as a critical application item and must be free of mercury and its compounds except in approved applications such as batteries, laboratory instruments, and weapon systems, with additional containment requirements for portable devices containing mercury. Use of Class I ozone-depleting substances is strictly prohibited in any phase of production unless written approval is granted. Packaging must comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129 with no special marking required. Delivery is to the DLA Distribution Center in New Cumberland, Pennsylvania, with inspection and acceptance occurring at destination. The contract enforces zero variance in quantity and requires the unit of issue to be each. The solicitation was issued on August 4, 2026, with responses due by August 17, 2026, under contract number SPE7M2-26-T-5986.
Electronic Connector Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7M2-26-Q-0719
The contract awards O-rings under NSN 5331-00-167-5126 with a total quantity of 2,210 units distributed across three delivery points: Norfolk Virginia, San Diego California, and Warner Robins Georgia, with delivery required within 150 days of award. The items must comply with SAE AS3209C and AMS7276J specifications and are classified as critical application items subject to strict quality control. Manufacturing and assembly must be performed only by accredited entities listed on the Performance Review Institute’s Qualified Manufacturer List or Qualified Product List, accessible via eAuditNet. The contract prohibits the use of mercury or mercury-containing compounds in any part of the product, packaging, or preservation, with narrow exceptions for functional components like batteries and sensors specifically authorized by NAVSEA, and mandates shock-proof designs with secondary containment for permissible mercury-containing items. Zero-tolerance sampling applies under MIL-STD-1916 or equivalent zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively. Packaging must adhere to MIL-STD-2073-1E and DLA’s RP001 standards, including strict compliance with MIL-STD-129 marking rules and a ban on class I ozone-depleting chemicals in all materials and processes. Pricing is firm fixed price with no tolerance for quantity variances, inspection and acceptance occur at destination, and FOB terms are origin. All deliveries must use designated military shipping addresses and follow DLA transport protocols.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, HEXAG
Solicitation # SPE7M2-26-T-5984
The contract specifies the procurement of 23,869 self-locking hexagon nuts under NSN 5310-01-358-7622, with delivery due in 161 days FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The nuts must comply with technical standards NASM17829 Rev 2, NASM25027 Rev 1, and MIL-DTL-32258, and are classified as a critical application item requiring strict adherence to configuration control and engineering change procedures. All supplies must be free of mercury and mercury-containing compounds except for specific exempted uses such as batteries or sensors approved by NAVSEA, and portable devices containing mercury must include a secondary containment. Ozone-depleting chemicals are strictly prohibited, and any substitute materials require pre-approval. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, with preservation methods specified as Type 10, Class 50, and no special marking required. Sampling inspections must conform to MIL-STD-1916 or ASQ H1331 with zero non-conformances accepted unless otherwise directed, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Full and open competition applies, and the contract enforces DLA packaging and procurement requirements, including prohibition of mercury in preservation and packaging materials. The delivery window, quantity, and unit price are fixed with no variance allowed, and the point of contact for inquiries is David Larsen of the Department of Defense.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, HE
Solicitation # SPE7M2-26-Q-0716
This contract specifies the procurement of 65 self-locking hexagon nuts identified by NSN 5310-00-255-0010 and part number MS17830-24C, manufactured in compliance with the non-government standard NASM17830 Revision 3 dated July 31, 2023, and governed by QAP-13873 Revision D. The item is classified as a commercial item and a critical application component, requiring strict adherence to technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements. All hardware must conform to the current revision of the applicable standard, with prior revisions accepted only for previously manufactured items; no exceptions apply to future production. Sampling and inspection follow MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Zero non-conformances are required in sampled lots unless otherwise contracted. Mercury and mercury-containing compounds are strictly prohibited in the hardware, preservation, packaging, and marking, except for specific exempted applications such as certain batteries, lights, instruments, or weapon systems as defined by NAVSEA, which must include secondary containment and shock-proof design. The nuts are subject to firm fixed pricing with no variance allowed in quantity, and delivery must occur within 100 days after order award. Pricing brackets are defined for quantities from 100 to 250 and 251 to 500 units, with delivery expected within 100 days for each tier. Packaging must comply with MIL-STD-2073-1E and DLA’s packaging requirements, including preservation method 33, dry clamping, and non-corrosive materials, with marking per MIL-STD-129 and no special codes. Palletization must follow DLA guidelines, and all packaging must exclude mercury or mercury compounds entirely. Items are to be shipped FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at destination. The solicitation is a total small business set-aside, with a bid deadline of August 11, 2026, and the contract is managed by the Department of Defense’s Nuclear Reactor Program.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details