Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Sentry 110 Cobalt Exposure Device Maintenance

Active

Federal

Response Deadline09/09/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves performing annual preventative maintenance on Sentry 110 Cobalt exposure devices for prime contractors operating at the U.S. Navy Portsmouth Naval Shipyard in Kittery, Maine. The selected provider must execute all maintenance according to manufacturer certifications, utilize specific diagnostic tools, and handle over-and-above repairs as needed. Deliverables include a certified, maintained device and Condition Found reports documented via DD Form 1423. The contract falls under NAICS code 811212 and is managed under the Department of Defense. A critical requirement for the provider is maintaining CMMC compliance for all systems processing Federal Contract Information or Controlled Unclassified Information. The solicitation was posted on September 4, 2026, with a response deadline of September 9, 2026.

General Info

Annual maintenance of Sentry 110 Cobalt devices at Portsmouth Naval Shipyard, Maine.

Agency

Department Of Defense → Portsmouth Naval Shipyard GfView Agency

NAICS

811212 - Computer and Office Machine Repair and MaintenanceView NAICS

Place of Performance

Kittery, ME, 03904, USA

Set-Aside

NONE

Documents

This scope was carved out of N3904026Q5703.

The full solicitation package (7 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Sentry 110 Cobalt Device Maintenance

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 4

subcontract

Response DeadlineSep 9

Submission deadline

Response Deadline

09/09/2026, 04:00:00 PM UTCin 4 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Portsmouth Naval Shipyard Gf

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Portsmouth Naval Shipyard Gf

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs annual preventative maintenance on Sentry 110 Cobalt exposure devices for prime contractors on U.S. Navy Portsmouth Naval Shipyard projects. Executes maintenance per manufacturer certification, performs over-and-above repairs, and generates Condition Found reports using DD Form 1423. Requires manufacturer-specified diagnostic tools and CMMC compliance for systems processing FCI/CUI. Delivers a certified, maintained device and DD Form 1423.

Similar Contracts

Same NAICS industry code

Managed Print Services (MPS) & Maintenance

Transportation (DDOT)

POSTED

DEADLINE

Equipment Installation and Configuration

Transportation (DDOT)

POSTED

DEADLINE

GDP Hardware Maintenance and Warranty Support

Naval Air Warfare Center Air Division

POSTED

DEADLINE

Installation and Calibration of Dental Imaging EquipmentThis subcontract involves the physical installation, mounting, and calibration of dental imaging equipment for the Department of Veterans Affairs at the Rolla CBOC. The scope of work includes unpacking, electrical connection, and software configuration for radiographic units and the CS 9600 to ensure a fully operational imaging suite. All work must be performed by certified medical equipment technicians and adhere strictly to radiation shielding standards. The opportunity is set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 811212. Managed by the Network Contract Office 15, the project is located in Rolla, Missouri. Interested parties must respond by September 14, 2026.

255-NETWORK Contract Office 15 (36C255)

POSTED

DEADLINE

DIC System Technical Services and Training

NASA Shared Services Center

POSTED

DEADLINE

Post-Installation Maintenance and Support Services

W6QM Micc Fdo Ft Bragg

POSTED

DEADLINE

Authorized OEM Service Provider / Field Service Engineer

Csa East 2 Usda-Fs

POSTED

DEADLINE

Honeywell Vindicator V5 System Specialist

FA2835 Aflcmc Hanscom Pzi

POSTED

DEADLINE

ABL90 Flex Plus Analyzer Maintenance & ServiceThis subcontract involves the annual extended service and on-site maintenance of one ABL90 Flex Plus analyzer for prime contractors supporting Navy Medical Research Unit-San Antonio projects. The selected provider must perform preventative maintenance and technical support according to Radiometer America Inc. guidelines, utilizing manufacturer-specific diagnostic tools and replacement parts. To be eligible, the contractor must hold OEM certification or be an authorized service provider, ensuring the delivery of a fully operational analyzer and detailed service reports. The opportunity is a Service-Disabled Veteran-Owned Small Business set-aside under NAICS code 811212, managed by the Navsup Flt Logistics Ctr Norfolk for the Department of Defense. Performance will take place in San Antonio, Texas, zip code 78234. The solicitation was posted on September 2, 2026, with a response deadline of September 8, 2026.

Navsup Flt Logistics Ctr Norfolk

POSTED

DEADLINE

AB Sciex LC-MS/MS Technical Support and MaintenanceThis subcontract provides technical support and preventative maintenance for AB Sciex ExionLC AE LC and QTRAP 5500 MS/MS instruments supporting NOAA Northwest Fisheries Science Center projects. The scope of work includes maintaining micro-volume liquid handlers, voltage regulation, and ultra-high vacuum systems through the use of OEM parts and proprietary AB Sciex diagnostic software. To be eligible, the provider must hold AB Sciex authorized and certified OEM distributor status. The primary deliverables for this engagement are the provision of fully operational instruments and the submission of detailed maintenance logs. This opportunity is associated with the Department of Commerce under NAICS code 811212.

Department Of Commerce Noaa

POSTED

DEADLINE

Imaging System Overhaul & Repair

Sflc Procurement Branch 1(00080)

POSTED

DEADLINE

Repair and Overhaul of Raymarine AIS5000 Transponders

Sflc Procurement Branch 3(00040)

POSTED

DEADLINE

More opportunities from Department Of Defense → Portsmouth Naval Shipyard Gf

Same awarding agency

Specialized Equipment Transport (Return Freight)This subcontract provides return freight services for prime contractors supporting projects at the Portsmouth Naval Shipyard. The primary objective is the secure transport of a Sentry 110 Cobalt exposure device from a maintenance facility back to the shipyard. To ensure equipment integrity, the contractor must utilize appropriate shipping containers or cradles and strictly adhere to all shipping regulations governing sensitive and specialized equipment. The project is managed under the Department of Defense for the Portsmouth Naval Shipyard, with performance taking place in Kittery, Maine. Classified under NAICS code 484220, the contract requires the final delivery of the device directly to the shipyard facility.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Chilled Water Hose and Fitting Supply

Construction and Mining (except Oil Well) Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Industrial Exhaust Blower Rental

Other Commercial and Industrial Machinery and Equipment Rental and Leasing

POSTED

DEADLINE

Temporary HVAC and Dehumidification Unit Rental

Other Commercial and Industrial Machinery and Equipment Rental and Leasing

POSTED

DEADLINE

Heavy Equipment Transportation (Freight)

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

HVAC Preventative Maintenance and Calibration

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Emergency Remote Stop (E-Stop) System Installation

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Off-Gas Testing and VOC Chemical Analysis

Surveying and Mapping (except Geophysical) Services

POSTED

DEADLINE

Sentry 110 Cobalt Device Maintenance

Solicitation # N3904026Q5703

The Portsmouth Naval Shipyard is seeking a service contract under solicitation N3904026Q5703 for the annual maintenance of a Sentry 110 Cobalt Exposure Device. This equipment is essential for the Radiography Program to perform nondestructive testing inspections on production welds and base materials. Because the device is critical for completing these inspections, the maintenance must be performed annually by the manufacturer at their own facility. The solicitation was posted on September 4, 2026, with a response deadline of September 9, 2026. This requirement falls under NAICS code 334517 and is managed by the Department of Defense. While the contracting office is located in Portsmouth, New Hampshire, the place of performance is listed as Kittery, Maine. The primary point of contact for this opportunity is Sheldon Desmaratti.

Irradiation Apparatus Manufacturing

POSTED

DEADLINE

NAVSUP Off Gas Testing

Solicitation # N3904026Q5642

The Portsmouth Naval Shipyard, under the Department of Defense, is seeking a contractor for the NAVSUP Off Gas Testing project, solicitation number N3904026Q5642. The primary objective is to perform chemical analysis and off-gas testing on specific Government Furnished Property to ensure that materials do not emit toxic Volatile Organic Compounds. This testing is critical to protecting personnel health within sealed atmospheric environments. The solicitation is categorized under NAICS code 541380 and is managed by the office located in Portsmouth, New Hampshire, with the actual performance of work taking place in Kittery, Maine. Interested parties must respond by September 8, 2026. The primary point of contact for this requirement is Sheldon Desmaratti.

Testing Laboratories and Services

POSTED

DEADLINE

Overhaul - Barrier Boat

Solicitation # N3904026Q5666

The Portsmouth Naval Shipyard is conducting market research under solicitation number N3904026Q5666 to identify qualified small business vendors capable of performing a comprehensive overhaul of barrier boat 30BB0701, a vessel approximately 30 feet in length. This sources-sought notice, posted on June 26, 2026, with responses due by July 14, 2026, is strictly for planning purposes and does not initiate a formal procurement or obligate government funds. The effort is set aside exclusively for small businesses under FAR 19.5, targeting NAICS code 336611 for ship and boat building. The draft statement of work outlines an extensive scope covering seventeen specialized attachments, including hull inspection and preservation, propulsion system upgrades, fuel and sea water system maintenance, electrical system upgrades, steering and fire suppression system certification, and a required four-hour sea trial. Work will occur at both the Portsmouth Naval Shipyard in Kittery, Maine, and the contractor’s facility, with performance capped at three months from vessel delivery. All personnel must be U.S. citizens, and access to the NAVSEA-controlled industrial area requires strict vetting, including submission of personal identifiers, two forms of ID with proof of citizenship, and completion of SECNAV 5512/1 forms to obtain a DBIDS credential. Contractors are required to provide fully burdened hourly labor rates for senior technicians, technicians, and assistants, along with per-mile travel charges beyond 30 miles from PNSY and fixed quotes for shipping returned items. Material costs must be billed at actual cost with no added handling fees, overhead, or profit; any trade-in or residual value from replaced parts must be returned to the government and reflected in adjusted invoices. Monthly cost reporting is mandatory, and cost overruns require prior written approval. All work must adhere to strict quality standards, including SSPC-SP 11 surface preparation, a black anti-fouling top coat with zero allowable defects, and absolute watertight integrity below the waterline with no leakage permitted. Acceptance inspections must validate full functionality of all systems prior to sea trials, with contractors responsible for documenting test data, making corrections, and conducting additional trials if discrepancies arise. Vehicles used on site must display contractor logos on both sides with a minimum two-inch font, be properly registered and inspected, and may only be used for equipment delivery, not personnel transport. Routine work activities are prohibited on

Ship Building and Repairing

POSTED

DEADLINE

Rental of Temporary HVAC System, Exhaust Blowers and DCCU System

Solicitation # N3904026Q1013

The Portsmouth Naval Shipyard Gf, under the Department of Defense, is soliciting a firm-fixed-price contract for the rental of a temporary HVAC system, exhaust blowers, and a Desiccant Climate Controlled Unit (DCCU) system. The equipment will be utilized at Naval Base Point Loma in San Diego, California. The required equipment suite includes a dual coil 20,000 CFM HVAC unit, four industrial exhaust blowers, two 15,000 CFM DCCUs, four 150 KW electric fan coil unit heaters, a 200/230 ton air-cooled chiller unit, a 600 GPM chilled water pump, and 1,000 feet of 6-inch diameter chilled water hose, along with eleven remote emergency stop switches and associated hoses and fittings. The scope also encompasses preventative maintenance, training, and all associated freight and transportation costs. The contract is structured with primary rental periods spanning from September 2026 through July 2027, with several four-week extension options available for specific equipment. Award will be based on the Lowest Price, Technically Acceptable (LPTA) basis, evaluating technical acceptability, price reasonableness, and past performance. All equipment must be delivered fully charged, fueled, and assembled, with acceptance contingent upon satisfactory inspection and testing by the Government. Contractors must adhere to strict packaging and marking standards, including MIL-STD-130 and MIL-STD-129, and provide various deliverables such as certification data reports, maintenance plans, and calibration certificates. Invoicing is to be processed electronically via the WAWF system.

Other Commercial and Industrial Machinery and Equipment Rental and Leasing

POSTED

DEADLINE