Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Specialized Equipment Maintenance & Calibration (OSLR 250)

Active

State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for the Division of Nuclear Safety in Illinois involves the specialized maintenance and calibration of OSLR 250 Reader systems. The selected provider will perform on-site preventative maintenance, troubleshooting, and repairs for prime contractors working on Emergency Management Agency projects in Springfield. Key responsibilities include conducting scheduled inspections, calibrating sensors to manufacturer specifications, replacing worn components, and performing diagnostic tests to ensure operational efficiency. To qualify for this engagement, the contractor must hold a manufacturer certification specifically for OSLR 250 equipment. Deliverables for the contract include detailed maintenance logs, official calibration certificates, and the return of fully operational systems. The project is categorized under NAICS code 811219 and was posted on February 2, 2026.

General Info

Certified maintenance and calibration of OSLR 250 Reader systems for Illinois Nuclear Safety.

Agency

Illinois → Division of Nuclear Safety

NAICS

811219 - Other Electronic and Precision Equipment Repair and Maintenance

Place of Performance

Springfield, IL, 62703, USA

Set-Aside

NONE

Documents

This scope was carved out of 26-588IEMA-DIVNU-B-50936.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

26-588IEMA-DIVNU-B-50936 | EMA - Maintenance Agreement OSLR 250 Reader On-Site 2026 SPSSC - SM

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedFeb 2

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyIllinois → Division of Nuclear Safety

ContactsNo contacts available

OfficeN/A

Organization / AgencyIllinois → Division of Nuclear Safety

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs on-site preventative maintenance, troubleshooting, and repair of OSLR 250 Reader systems for prime contractors on Emergency Management Agency (EMA) projects. Conducts scheduled inspections, calibrates sensors to manufacturer specifications, replaces worn components, and performs diagnostic tests. Requires manufacturer certification for OSLR 250 equipment. Delivers maintenance logs, calibration certificates, and operational systems.

Similar Contracts

Same NAICS industry code

OEM Maintenance for Rail Flaw Detection DevicesThis subcontract focuses on providing OEM maintenance for rail flaw detection devices to support prime contractors on Network Rail Infrastructure Limited projects. The scope of work includes both preventative and corrective maintenance, technical support, and the deployment of OEM-certified technicians. To ensure the operational availability of ultrasonic devices, the contractor must utilize OEM diagnostic tools and genuine replacement parts, ultimately delivering a maintained fleet along with detailed maintenance logs. To be eligible for this contract, providers must hold RISQS code C.C.3.4.5.6 and maintain a status as an OEM or an OEM-authorized entity. The project falls under NAICS code 811219 and is specifically designed to maintain critical infrastructure safety equipment through specialized technical expertise and certified hardware support.

Network Rail Infrastructure Limited

POSTED

about 3 hours ago

DEADLINE

Portable Appliance Testing (PAT) ServicesThis subcontract for Portable Appliance Testing (PAT) Services involves performing safety testing on portable electrical appliances for prime contractors working on Mid and West Wales Fire and Rescue Authority facility projects. The scope of work includes conducting visual inspections, electrical safety testing, and the labeling of equipment using specialized PAT testing tools. To ensure quality and safety standards, the service provider must hold a valid registration with NICEIC, ECA, or NAPIT. The selected contractor is responsible for delivering comprehensive PAT testing logs and certificates of compliance for all tested assets. This opportunity was posted on November 4, 2026, with a response deadline of November 11, 2026. The contract falls under NAICS code 811219 and is managed by the Mid and West Wales Fire and Rescue Authority.

Mid and West Wales Fire and Rescue Authority

POSTED

about 6 hours ago

DEADLINE

Noise Monitoring Equipment Commissioning and MaintenanceThis subcontract for the City of Doncaster Council focuses on the commissioning and technical maintenance of noise monitoring equipment for airport projects. The selected provider will support prime contractors by performing initial system setup, routine calibration, preventative maintenance, and corrective repairs. All work must be executed using acoustic calibration tools in accordance with CPV codes 90742100 and 90742300 to ensure a fully maintained operational system and the delivery of a final commissioning report. The opportunity was posted on November 4, 2026, with a response deadline of November 30, 2026. Classified under NAICS code 811219, the contract requires specialized technical expertise to maintain critical monitoring infrastructure. Interested parties can find further details through the official tender notice provided by the City of Doncaster Council.

City of Doncaster Council

POSTED

about 6 hours ago

DEADLINE

Electronic Component Repair and Modification ServicesThis subcontract for Electronic Component Repair and Modification Services involves the teardown, evaluation, repair, and modification of electronic components, specifically NIIN 015577217, for prime contractors supporting NAVSUP Weapon Systems Support projects. The scope of work includes disassembling components to identify failures, executing repairs according to technical orders and drawings, and conducting testing to ensure OEM specifications are met. The contractor must possess the necessary testing equipment for the specified NIIN and maintain CMMC certification. All repaired components must be identified in accordance with MIL-STD-130 and packaged according to MIL-STD-2073-1. This Department of Defense opportunity falls under NAICS code 811219, with a response deadline of November 24, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

Circuit Card Assembly Repair and ModificationThis subcontract involves the teardown, evaluation, repair, and modification of ten Circuit Card Assemblies (NSN 5998-21-921-2512) for prime contractors supporting Navsup Weapon Systems Support Mech projects. The selected provider will be responsible for disassembly, diagnostic testing, and repairs conducted in accordance with technical orders and contractor overhaul standards, ensuring all items are identified per MIL-STD-130, REV N. To be eligible, the contractor must maintain authorized repair source status and demonstrate CMMC compliance. The final deliverable consists of ten fully repaired and functional assemblies. This opportunity is categorized under NAICS code 811219 and is issued by the Department of Defense.

Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

Annual Maintenance and Software Support ServicesThis subcontract for Annual Maintenance and Software Support Services supports prime contractors on projects for the National Institutes of Health Office of the Director. Over a two-year term, the selected provider will perform ongoing service, annual preventive maintenance visits, and the installation of proprietary software updates to ensure a fully maintained operational system. The contract requires the use of manufacturer-certified technicians to execute the work and deliver comprehensive maintenance logs and updated software versions. This opportunity is categorized under NAICS code 811219 and is managed through the Department of Health and Human Services.

National Institutes Of Health Olao

POSTED

about 8 hours ago

DEADLINE

Repair and Overhaul of Data Interface Unit (NSN 7025-01-529-9163)This subcontract involves the repair and overhaul of the Data Interface Unit (NSN 7025-01-529-9163) for the Department of Defense, specifically under the Navsup Weapon Systems Support Mech. The scope of work includes the teardown, diagnostic testing, and repair of units for prime contractors on US Navy electronic equipment projects. All work must be executed according to technical orders and approved standards, with final items marked in accordance with MIL-STD-130, Rev N to ensure a fully functional and tested delivery. The project requires the use of specialized tooling and strict adherence to NIST SP 800-171 compliance for handling Controlled Unclassified Information. Classified under NAICS code 811219, the opportunity was posted on November 4, 2026, with a response deadline of December 4, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Mettler Toledo System Installation and MaintenanceThis subcontract involves the professional installation and long-term maintenance of Mettler Toledo gravimetric systems for the Department of Veterans Affairs San Diego Healthcare System. The selected provider will work under prime contractors to deliver a fully operational system and execute a five-year support agreement focused on calibration and operational readiness. To qualify, the contractor must provide certified technicians specifically authorized to service Mettler Toledo equipment. The project is located in San Diego, California, and falls under NAICS code 811219. Responses for this opportunity are due by November 13, 2026.

262-NETWORK Contract Office 22 (36C262)

POSTED

about 8 hours ago

DEADLINE

Parking Infrastructure Maintenance ProviderThis subcontract opportunity is for a Parking Infrastructure Maintenance Provider to support prime contractors on City of Cranbrook parking projects in Canada. The selected provider will be responsible for the ongoing operation and maintenance of both physical and digital infrastructure, specifically focusing on the preventative maintenance of kiosks through cleaning, hardware repair, and the troubleshooting of field connectivity issues. Key deliverables include the provision of detailed maintenance logs and the assurance of guaranteed system uptime. To be eligible, the provider must be registered with Worksafe BC and maintain strict compliance with all OH&S regulations. Interested parties must submit their responses by the deadline of November 25, 2026.

City of Cranbrook

POSTED

about 23 hours ago

DEADLINE

Laboratory Gas Generation & Support Equipment MaintenanceThis subcontract for Laboratory Gas Generation and Support Equipment Maintenance involves providing specialized maintenance and repair services for the San Diego County Department of the Medical Examiner toxicology lab. The scope of work focuses on conducting routine inspections and preventative maintenance for Parker Balston Tri-Gas Generators, as well as offering technical support and repairs for Agilent Instant Pilot Handheld Controllers. All services must be performed according to manufacturer specifications to ensure the delivery of fully operational gas generation systems and detailed service reports. The project is located in San Diego, California, and falls under NAICS code 811219. Interested parties should note that the response deadline is December 4, 2026, with the opportunity being managed through the San Diego County procurement system.

San Diego County

POSTED

DEADLINE

Liquid Chromatography (LC) & Autosampler MaintenanceThis subcontract involves providing preventive maintenance and repair services for the San Diego County Department of the Medical Examiner toxicology lab. The scope of work focuses on Agilent 1100/1200 Series binary and quaternary pumps, vacuum degassers, column compartments, Diode Array Detectors, and Agilent 7693A Automatic Liquid Samplers. All services must be performed according to manufacturer specifications, with the final delivery including the serviced liquid chromatography systems and corresponding electronic service reports. The project is based in San Diego, California, and falls under NAICS code 811219. Interested parties should note that the response deadline is December 4, 2026. This opportunity is designed for providers capable of supporting prime contractors in maintaining critical laboratory instrumentation to ensure operational efficiency and compliance within the medical examiner's facility.

San Diego County

POSTED

DEADLINE

Gas Chromatography (GC) Maintenance & RepairThis subcontract involves providing routine preventive maintenance, inspection, and repair services for the San Diego County Department of the Medical Examiner toxicology lab. The scope of work focuses on annual maintenance visits for Agilent 7890A/B and 6890N Gas Chromatographs, as well as Agilent 5973/5975C Inert MSDs. Key technical responsibilities include troubleshooting inlets and FID detectors, ensuring all work adheres to manufacturer specifications, and delivering serviced systems along with electronic service reports. The project is located in San Diego, California, and falls under NAICS code 811219. Interested parties should note that the response deadline is December 4, 2026. This opportunity is structured as a subcontract for prime contractors supporting the county's medical examiner operations.

San Diego County

POSTED

DEADLINE

More opportunities from Illinois → Division of Nuclear Safety

Same awarding agency

Calibration Training for Hand-Held Portable Radiation Instruments and DosimetryThis subcontract, issued by the Illinois Division of Nuclear Safety, requires the delivery of technical training on calibration practices for personnel dosimetry and portable radiation detection instruments. The training is designed for prime contractors working on State of Illinois radiation safety projects and must cover specific industry standards, including ANSI N42.323AB-2026, ANSI N42.17A-2003, ANSI N13.11-2022, and NCRP Report No. 112. The selected provider will utilize portable radiation detection and dosimetry equipment to instruct a total of 24 participants. In addition to the instructional sessions, the contractor is responsible for providing all necessary instructional materials. The solicitation was posted on November 4, 2026, with a response deadline of November 12, 2026, under NAICS code 611519.

Other Technical and Trade Schools

POSTED

about 6 hours ago

DEADLINE

Gamma Reference Field Calibration Training ServicesThis subcontract, issued by the Illinois Division of Nuclear Safety, involves the delivery of specialized technical training focused on gamma radiation reference fields and instrument calibration. The services are designed for prime contractors working on State of Illinois nuclear calibration laboratory projects and include both classroom and hands-on instruction. The training must adhere to strict industry standards, specifically ISO 4037-2019, IEEE/ANSI N42.323AB-2026, and ANSI N42.17A-2003, utilizing specialized equipment such as electrometers, ionization chambers, and gamma radionuclides. The scope of work requires the provision of instructional materials and the successful completion of training for five participants. Interested parties should note that the response deadline is November 12, 2026. The project falls under NAICS code 611519, reflecting its nature as a professional technical training service.

Other Technical and Trade Schools

POSTED

about 6 hours ago

DEADLINE

EMA - Radiation Calibration Training- SM

Solicitation # 27-588IEMA-MGMTA-B-54733

The State of Illinois, through the Division of Nuclear Safety, is soliciting training services to enhance the technical capabilities of personnel within the Nuclear Calibration Laboratory and associated radiation safety programs. The contract requires the delivery of two onsite courses in Springfield, Illinois: Gamma Reference Field Calibration Training for five participants and Calibration Training for Hand-Held Portable Radiation Instruments and Dosimetry for twenty-four participants. The contractor must provide qualified instructors, all necessary instructional materials, and documentation of course completion. All training must adhere to specific industry standards, including ISO 4037-2019, IEEE/ANSI N42.323AB-2026, ANSI N42.17A-2003, ANSI N13.11-2022, and NCRP Report No. 112. Administratively, the contract is subject to the Illinois Freedom of Information Act and the State Prompt Payment Act, with invoicing typically occurring at the completion date. Funding may be partially or totally derived from federal sources and is contingent upon the availability of sufficient funds. The vendor is required to maintain adequate insurance, including Worker's Compensation, and must comply with prevailing wage laws and equal opportunity requirements. Legal disputes are subject to the exclusive jurisdiction of the Illinois Court of Claims. The State maintains the right to terminate the contract immediately if vendor actions jeopardize health, safety, or property.

Other Technical and Trade Schools

POSTED

about 6 hours ago

DEADLINE

LPS Onsite Installation and Acceptance TestingThis subcontract for the Division of Nuclear Safety involves the physical installation and assembly of a Linear Positioning System for prime contractors on nuclear safety projects in Springfield, Illinois. The scope of work includes managing the transport and rigging of components through restricted 48-inch doorways and the precise assembly of irradiator stands, platforms, and linear rails using specialized leveling tools. The contractor is responsible for conducting onsite acceptance testing to ensure the system meets strict load capacities and a positioning accuracy of 1mm. The final deliverable is a fully commissioned Linear Positioning System. Interested parties must respond by November 6, 2026, under NAICS code 238990.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Heavy-Duty Irradiator Mounting Stand FabricationThis subcontract, titled Heavy-Duty Irradiator Mounting Stand Fabrication, involves the production of fixed stands and mounting cradles for prime contractors supporting IEMA-OHS nuclear safety projects. The scope of work requires the construction of steel stands capable of supporting a 250 lbs load with beam line heights ranging from 1.0 to 1.5 meters. Additionally, the contractor must fabricate a specialized IDNS Cradle designed for 200 lb irradiators, ensuring full compatibility with JLS irradiators through precision drilling and tapping for X-axis alignment. Managed by the Illinois Division of Nuclear Safety under NAICS code 332312, the project culminates in the delivery of the completed irradiator stand and IDNS cradle. The solicitation was posted on October 21, 2026, with a response deadline set for November 6, 2026.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

LPS Structural Fabrication and Precision MachiningThe LPS Structural Fabrication and Precision Machining subcontract involves the production of high-capacity instrument platforms and linear rail systems for prime contractors supporting IEMA-OHS nuclear safety projects. The scope of work requires the machining of 50cm by 50cm platforms featuring 1cm grid engraving and M6x1.0 tapped holes spaced at 10cm intervals. Additionally, the contractor must construct linear frames using steel or aluminum designed to minimize warping over lengths of 9 meters while maintaining a load capacity of 100 lbs with no deflection. Managed by the Illinois Division of Nuclear Safety under NAICS code 332710, the contract focuses on the delivery of these precision-fabricated platforms and structural frames. The solicitation was posted on October 21, 2026, with a response deadline set for November 6, 2026.

POSTED

DEADLINE

LPS Motion Control and Automation IntegrationThe LPS Motion Control and Automation Integration subcontract, issued by the Illinois Division of Nuclear Safety, involves the design, programming, and integration of automated X- and Z-axis motion systems for nuclear safety projects. The scope of work requires the implementation of stepper-motor driven automation capable of 9m X-axis and 30cm Z-axis travel with a positioning accuracy of 1mm. Key technical deliverables include a digital user interface for real-time display and position entry, the integration of precision encoders, and the installation of cable management systems. The selected contractor is responsible for delivering a fully functional automated motion control system along with comprehensive operation and maintenance manuals. This project falls under NAICS code 541330 and was posted on October 21, 2026, with a response deadline of November 6, 2026.

Engineering Services

POSTED

DEADLINE

EMA - Linear Positioning System for Gamma Calibrators

Solicitation # 27-588IEMA-DIVNU-B-54600

The Illinois Emergency Management Agency and Office of Homeland Security, specifically the Division of Nuclear Safety, is soliciting bids for the procurement and installation of a Linear Positioning System (LPS) for a radiation calibration laboratory. The system is designed to enable precise, repeatable positioning of radiation detection instruments along the beam axis and centerline, featuring automated X- and Z-axis motion, an irradiator mounting stand with a load capacity of at least 250 lbs, and a Z-axis minimum travel of 30 cm below the beam centerline. All equipment must be delivered and installed at 1301 Knotts Street, Springfield, IL, by June 30, 2027, and components must be designed to fit through a 48-inch nominal doorway. The awarded vendor is responsible for onsite installation, acceptance testing, and providing comprehensive documentation, including mechanical drawings and maintenance manuals. This is an Invitation for Bid (IFB) where the award will be granted to the lowest priced responsive and responsible bidder. Bidders must submit their responses electronically via the BidBuy portal by the specified deadline, ensuring all required documentation, such as Vendor Disclosures and Utilization Plans, are included to avoid being deemed non-responsive. The contract is governed by the laws of the State of Illinois and requires the vendor to maintain specific insurance coverages, including General Commercial Liability of $1,000,000 per occurrence and Auto Liability of $1,000,000 per occurrence. A standard manufacturer's warranty of at least 12 months is required and must be transferable to the agency. Payment and invoicing are subject to state regulations, and the contract may be partially or totally funded with federal funds.

Irradiation Apparatus Manufacturing

POSTED

DEADLINE

ISO 17025 Accredited Electrical Measurement CalibrationThis subcontract involves providing professional calibration services for electrical measurement instruments supporting prime contractors on Illinois Emergency Management Agency and Office of Homeland Security Division of Nuclear Safety projects. The scope of work includes the calibration of power supplies, waveform generators, oscilloscopes, multimeters, and environmental sensors. Services may be performed either at an off-site laboratory or on-site in Springfield, Illinois. To ensure technical precision and compliance, the provider must maintain ISO 17025 accreditation and ensure all calibrations are NIST traceable. Final deliverables for each instrument must include applied calibration stickers and comprehensive traceability documentation. The contract is categorized under NAICS code 811310 and is managed by the State of Illinois.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 2 months ago

DEADLINE

Electronic Security System InstallationThis subcontract for the Illinois Division of Nuclear Safety involves the Electronic Security System Installation in Springfield. The project requires the removal of legacy cameras and the installation of replacement DTS-75 units, including mounting, cabling, and connectivity testing to ensure the system is fully operational and fit for its intended use. The contractor must utilize appropriate installation tools and low-voltage testing equipment, ensuring all personnel are trained and competent. Classified under NAICS code 238210, the primary objective is to deliver a complete and functional camera system for prime contractors operating within the agency's facilities.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

DTS-75 Replacement Camera Equipment SupplierThis subcontract involves the supply of DTS-75 replacement cameras and mounting hardware for prime contractors working on Illinois Division of Nuclear Safety projects. The supplier is responsible for sourcing, packaging, and delivering camera units that adhere to state standards for quality and merchantability, with performance taking place in Springfield, Illinois. A critical component of the agreement is the provision of manufacturer warranties that are transferable to the State of Illinois, guaranteeing that all supplied hardware remains defect-free for a period of 12 months. The contract falls under NAICS code 423610 and is managed by the Illinois Division of Nuclear Safety.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

Replacement Parts Supply (OSLR 250 Components)This subcontract, titled Replacement Parts Supply (OSLR 250 Components), involves the sourcing and delivery of genuine manufacturer replacement parts, consumables, and hardware components for OSLR 250 Readers. These materials are provided to prime contractors working on Emergency Management Agency projects for the Illinois Division of Nuclear Safety. All supplied components must meet specific state drawings and specifications, and the provider is required to hold OEM Authorization and provide a warranty of merchantability. The contract is categorized under NAICS code 423430 and is centered in Springfield, Illinois. It was posted on February 2, 2026, and focuses on the procurement of OEM hardware to ensure the operational integrity of specialized reading equipment used within the state's nuclear safety infrastructure.

Computer and Computer Peripheral Equipment and Software Merchant Wholesalers

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS