Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Government Contract opportunity from Department Of Defense was posted on March 18, 2022. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Standby Generator Services, Naugatuck River Basin, CT

Awarded
W912WJ22A0004Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310
New
Kubota M8200 Clutch Replacement
Solicitation # kubota-m8200-clutch-replacement
Management and Training Corporation is soliciting lump sum fee proposals for the clutch replacement of a Kubota M8200 tractor with front wheel assist, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires a qualified contractor to provide all transportation, labor, materials, and equipment to diagnose and repair the clutch assembly and power take-off system. Key technical requirements include replacing friction discs, bearings, oil seals, and O-rings, resurfacing the flywheel, and replacing hydraulic pipes and filters as needed. The contractor must perform all work according to manufacturer specifications and provide a final summary of diagnostic findings, an itemized list of replaced parts, and warranty documentation upon completion. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified entities. Bids must be submitted via email to Angie Mahoney by 3:00 PM CST on November 3, 2026, and must include a bid sheet, proof of insurance, a completed supplier packet with a W-9, and applicable SBA certification letters. Award decisions will be based on best value, with a focus on administrative compliance and technical qualifications. The contract is subject to various Federal Acquisition Regulations, including standards for combating trafficking in persons, Buy American restrictions, and Service Contract Labor Standards per Wage Determination 2015-4687 Revision 31 for Kentucky.
Earle C. Clements Job Corps Center

POSTED

about 1 hour ago

DEADLINE

in 5 days
NAICS: 811310
New
SLED
SMDOT Elevator Maintenance
Solicitation # 12701633
The City of Santa Monica Department of Transportation (SMDOT) is soliciting bids for turnkey maintenance, inspection, and repair services for three hydraulic elevators located at 1620 6th Street. The equipment includes two passenger elevators and one freight elevator, specifically models AAK137, AA2986, and AEP227. The scope of work requires monthly systematic examination, lubrication, and repair of critical components, as well as monthly emergency recall and override testing in accordance with California Administrative Code Title 8, Section 3000(h). All provided materials must be new and meet Original Equipment Manufacturer standards. Bids must be submitted electronically via the OpenGov portal by December 3, 2026, at 3:00 pm. Qualified bidders must possess a valid C-11 California contractor's license and provide a maintenance supervisor to ensure compliance with safety requirements. The contract award is based on a weighted evaluation of experience and technical competence (25%), ability to meet work plans and timelines (25%), cost (20%), stability and references (10%), value add (10%), and quality control (10%). The City is not required to select the lowest monetary bidder. Key contractual requirements include a payment bond for awards exceeding 25,000 dollars, a Living Wage Certification for awards over 54,200 dollars, and compliance with the Oaks Initiative and ADA Title II. Successful bidders must provide a Certificate of Insurance naming the City of Santa Monica as an additional insured. Payment terms are net thirty days. The agreement includes an initial term with four subsequent annual renewal options.
D600 DEPT OF TRANSPORTATION - SaMoDOT

POSTED

about 16 hours ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
CNG Fueling Station Maintenance and Repair Services
Solicitation # 2026-RFP-0441
The County of Sacramento is soliciting proposals under solicitation 2026-RFP-0441 to establish a contract for Compressed Natural Gas (CNG) fueling station preventative maintenance and repair services. The contract covers two facilities located at the Fleet Services Division and the Department of Airports. The selected contractor must provide certified CNG technicians to perform twice-monthly preventative maintenance and major services at 4,000 and 8,000-hour benchmarks. Service requirements include 24/7 availability, with on-site response times mandated within 48 hours for standard service calls and 24 hours for emergency calls. All work must adhere to manufacturer specifications and Cal/OSHA safety standards, including the provision of GHS Safety Data Sheets. The contract is designed for an initial one-year term with the option for four additional one-year extensions upon mutual agreement, with a scheduled award date of December 14, 2026. Award decisions will be based on factors other than price alone, utilizing a points-based scoring system that evaluates cost and the proposer's technical approach. Bidders must provide a Public Works and Prevailing Wage Contractor Registration number and are encouraged to utilize the County's Procurement Opportunities Program for small and micro-business preferences. Proposals must be submitted electronically via the SacCountyE bids portal by the final extended deadline of November 13, 2026.
DGS: CAPSD - Procurement

POSTED

about 16 hours ago

DEADLINE

in 15 days
NAICS: 811310
New
SLED
ELEVATOR & ESCALATOR MAINTENANCE, INSPECTIONS, AND TESTING
Solicitation # BPM059230
The Maryland Department of Transportation Maryland Transit Administration (MDOT MTA) is soliciting bids for a firm-fixed-price contract, AGY-26-001-MT, to provide comprehensive maintenance, inspection, and testing for elevators, escalators, and wheelchair lifts across various Metro stations in Maryland. The scope of work includes systematic preventive maintenance, emergency repairs, and deep cleaning to ensure all equipment remains in first-class operating condition in accordance with ASME A17.1 and A17.2 standards. The contract features a five-year base period with a total basis of award calculated at 4,750,000 dollars, which includes a 950,000 dollar allowance for reimbursable parts and materials. Bidders must maintain an operational office within 20 miles of Baltimore and provide certified mechanics with at least three years of documented experience. Award will be granted to the responsible bidder offering the lowest total price. Key procurement goals include a 17 percent Minority Business Enterprise (MBE) and a 1 percent Veteran-owned Small Business Enterprise (VSBE) participation rate. Bidders must possess at least three years of firm experience with comparable equipment and provide proof of significant insurance coverage, including 1 million dollars in general liability and 5 million dollars in pollution liability. Bids are due by November 12, 2026, and must include a bid bond, a contract affidavit, and detailed pricing for preventive maintenance and hourly labor rates. Performance is measured by the completion of specific checklist tasks rather than labor hours, and the contractor is required to submit safety reports within 24 hours of any incident.
Maryland Transit Administration

POSTED

about 18 hours ago

DEADLINE

in 14 days
NAICS: 811310
New
SLED
WOOHDR30R - Overhead Door Repairs and Maintenance - MDOT/SHA Worcester County
Solicitation # WOOHDR30R
Solicitation WOOHDR30R is an Invitation for Bids issued by the Maryland State Highway Administration for the preventative maintenance and repair of 27 overhead doors and their related operators at the Worcester County Shop locations in Snow Hill and Berlin. The scope of work requires semi-annual 20-point inspections and on-call repair services with a mandatory response time of four business days. All repairs must be performed by technicians with at least two years of experience, adhere to manufacturer specifications and building codes, and utilize new, first-quality parts. The contractor is required to provide a not-to-exceed cost quotation before performing any repair work and must submit detailed written reports following each service visit. The contract will be awarded to the responsive and responsible vendor offering the lowest total bid price. To qualify, bidders must demonstrate at least two years of continuous professional experience in overhead door services, be registered with the State Department of Assessments and Taxation, and possess their own employees, equipment, and vehicles without the use of subcontractors. Required submission documents include the eMMA Price Form, a Bid/Proposal Affidavit, and reference checks from the last five years. Payment is processed through the Snow Hill Shop, with specific billing requirements for trip charges, manlift usage, and materials priced at or below retail cost or MSRP. All work must comply with MOSH and OSHA safety regulations.
State Highway Administration

POSTED

about 18 hours ago

DEADLINE

in 20 days

AI Contract Overview

Show more

The U.S. Army Corps of Engineers New England District is soliciting Blanket Purchase Agreements for standby generator services across several project sites in the Naugatuck River Basin of Connecticut. These locations include the Black Rock Lake, Colebrook River Lake, and Thomaston Dam project offices, as well as the Goshen Radio Relay Station, Hop Brook Lake Project Office and Recreation Area, Naugatuck River Area Office, and the Stamford Hurricane Barrier Office. The selected contractors will be responsible for providing all labor, equipment, and supplies necessary for annual inspections, load tests, and emergency repairs. This procurement is a total small business set-aside under NAICS code 811310. The government intends to award up to two agreements with a master limit of 250,000 dollars, while individual calls under the agreement are capped at 25,000 dollars. The period of performance extends from the date of award through December 20, 2024. To be considered responsive, all offerors must maintain an active registration in SAM.gov at the time of submission.

General Info

Contract Value

$0

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

MA, USA

Set-Aside

SBA

Award Issued Date

Documents

1

Solicitation W912WJ22A0004 - Standby Generator Services

PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseAwarded
Posted

Presolicitation

Type Changed

Presolicitation → Solicitation

Deadline changed

Response deadline time changed from 7:00 PM UTC to 10:00 PM UTC on Mar 8, 2022.

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W2SD Endist New England
Contacts1 person available
OfficeCONCORD, MA, 01742-2751, USA
Office AddressCONCORD, MA, 01742-2751, USA
Contacts

Full Description

Show more
The U.S. Army Corps of Engineers - New England District is issuing a Pre-Solicitation Notice a Blanket Purchase Agreement (BPA) to provide an indefinite quantity of Standby Generator Services to the U.S. Army Corps of Engineers project sites located throughout the Naugatuck River Basin in Connecticut to include the following locations: Black Rock Lake Project Office in Thomaston; Colebrook River Lake Project Office, Colebrook; Goshen Radio Relay Station, Goshen; Hop Brook Lake Project Office and Recreation Area, Middlebury; Naugatuck River Area Office, Middlebury; Stamford Hurricane Barrier Office, Stamford; and Thomaston Dam Project Office, Thomaston, CT. THE WORK CONSISTS OF: The Contractor shall furnish all labor, equipment, and supplies necessary to deliver Standby Generator Services needed for each BPA call under the agreement. The period of performance of the resulting agreement will be from the date of award through 20 December 2024. The BPA Master Limit is $250,000; where no single BPA Call may exceed $25,000 in total cost. The Government intends to award multiple (up to two (2)) Blanket Purchase Agreements from this one solicitation. In accordance with FAR 13.303-3(a)(2), the Government is obligated only to the extent of authorized purchases actually made under the BPA. This is not a request for offers at this time. The solicitation requirements and contract documents, to include instructions for submission, and the response date will be available on or about February 18, 2022. Neither telephonic, mailed nor faxed requests for hard copies of this solicitation will be accepted. The solicitation will only be available online; in order to download the solicitation offerors must access www.SAM.gov. This procurement is set-aside for small business vendors. The applicable NAICS code is 811310 with a Small Business Size Standard of $8 Million. ALL OFFERORS MUST HAVE AN ACTIVE REGISTRATION IN SAM.GOV AT THE TIME OF SUBMISSION IN ORDER TO BE CONSIDERED. ANY OFFEROR THAT DOES NOT HAVE AN ACTIVE SAM.GOV REGISTRATION WILL BE REJECTED AS NON-RESPONSIVE.

More opportunities from Department Of Defense → W2SD Endist New England

Same awarding agency

NAICS: 237990
New
Federal
Construction Services for Confined Aquatic Disposal Cell Construction and Maintenance Dredging of the Providence River Federal Navigation Project, Providence, Rhode Island.
Solicitation # W912WJ27X1CUP
The U.S. Army Corps of Engineers, New England District, is seeking information from small and large businesses for a dredging project in Providence, Rhode Island, under NAICS code 237990. The project is estimated to cost between 80 million and 100 million dollars, with a solicitation expected around March 15, 2027. Construction is slated to begin in September 2027 and span approximately two years, divided into two dredging seasons ending August 31, 2029. The scope involves the mechanical dredging of approximately 5.5 million cubic yards of material using closed clamshell buckets. The work is divided into two primary sequences. First, the contractor must construct a new Confined Aquatic Disposal (CAD) cell at Edgewood Shoals North, which includes digging an access channel and excavating 3.2 million cubic yards of material for disposal at four designated sites. Second, the contractor will perform maintenance dredging of the Providence River and Harbor Federal Navigation Project to a depth of -40 feet MLLW plus two feet of allowable overdepth, removing approximately 2.3 million cubic yards of material to be placed in the newly constructed CAD cell. Strict operational requirements include maintaining a production rate of 300,000 cubic yards every 30 calendar days, working 24 hours a day, 7 days a week. All activities must adhere to prescribed environmental windows to protect aquatic wildlife, and extensions to these windows are not permitted. Interested firms must demonstrate experience with mechanical dredging at the required production rate and open water placement in New England during winter months. Capabilities packages are due by December 3, 2026.
Other Heavy and Civil Engineering Construction

POSTED

1 day ago

DEADLINE

in about 1 month
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS